Measurement Sensors

Filters

In stock (381)
Out of stock (662)

Showing 601 - 624 of 719 products

$6,141.76

Only 3 units left

Specifications

Model		LS-7010
Type		Small-diameter
Classification		without monitor camera
Measurement range		0.04 to 6 mm 0.002" to 0.24"
Smallest detectable object		0.04 mm 0.002"
Transmitter/receiver distance		60 ±5 mm 2.36" ±0.20"
Repeatability		±0.06 µm ±0.000002"^*1
Measurement accuracy		±0.5 µm ±0.00002"^*2
Sampling cycle		2,400 samples/sec.^*3
CCD scanning range		Approx. 7 mm 0.28"
Light source		GaN green LED
Monitor camera		Not provided
Environmental resistance	Enclosure rating	IP64^*4
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Transmitter: Approx. 140 g, Receiver: Approx. 340 g, Base: Approx. 220 g
^1 The value of ±2σ when the outer diameter of a rod 1 mm 0.04" in diameter is measured at the center of the measuring area while the number of averaging measurements is set to 512. ^2 The error when a moving rod 1.0 mm 0.04" in diameter is measured in the measuring area of 2 x 4 mm 0.08" x 0.16". ^3 1,200 samples/sec. when the mutual interference prevention function is used. ^4 The connector section is excluded.

Keyence LS-7601 Keyence

$2,461.98

Only 10 units left

Specifications

Model			LS-7601^*1
Type			High-performance
No. of connectable sensor heads			2 (fully compatible for all head types)
Display	Measurement display		TFT 5.5-inch LCD display
	Minimum display unit		0.01 µm to 100 µm (7-level selectable)
	Display range		±99.99999 to ±9,999.9 mm ±3.937" to ±393.7" (Linked to minimum display unit setting, mm/µm selectable)
	Measurement position monitor		Monitor image (When the measuring head with the monitor function is connected.)
	Tolerance check output display		5-level LCD indicator
Input terminal block	Synchronous 1, 2 input		Non-voltage input for OUT1
	Auto-zero 1, 2 input
	Reset 1, 2 input
	Statistics 1, 2 input
	Program selection input		Non-voltage input x 4 inputs
Output terminal	Analog voltage output		±10 V x 2 outputs
	Alarm output		NPN open-collector output (N.C.)
	Total judgment output		NPN open-collector output for OUT1
	Comparator ready output
	Strobe 1, 2 output
Connector I/O	SUB mode	Statistical processing output	NPN open-collector output x 2 outputs^*2
		Function output	Selectable from focus, area check, and differential, NPN open-collector output x 2 outputs^*2
		5-level comparator output	NPN open-collector output for OUT2^*2
		Comparator ready output
		Strobe output
	BCD mode	BCD output	Measurement data output (Sign + 7 digits), OUT1/OUT2 selectable, NPN open-collector output^*2
		BCD selection output	NPN open-collector output^*2
		BCD selection input	Non-voltage input^*2
	Statistical processing input		Non-voltage input for OUT2
	Synchronous input
	Reset input
	Auto-zero input
Interface	RS-232C		Measurement data output and control I/O, printer (Baud rate can be selected up to 115,200 bps.)
Video output			Conforming to the NTSC system (PIN connector)
Major functions			Simultaneous measurement, Area designation, Calculation, Averaging, Calibration, 16-program memory, Measurement modes, Auto-zero, Print-out, Abnormal value elimination, Transparent object measurement, Measurement point display, Group comparison, Unacceptable value history, Trend display, Statistical processing, Mutual interference prevention, Application function, etc.
Rating	Power voltage		24 VDC ±10 %^*3
	Power consumption		1.2 A max.^*3
Environmental resistance	Enclosure rating		IP64 (Panel surface only)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		35 to 85 % RH (No condensation)
Weight			Approx. 1,010 g
^1 The rating of the NPN open-collector inside the terminal block is: 100 mA max. (40 V max.), residual voltage of 0.5 V max. The rating of the NPN open-collector inside the connector I/O is: 30 mA max. (30 V max.), residual voltage of 0.5 V max. The rating of non-voltage input is: ON voltage of 1 V max., OFF current of 0.6 mA max. ^2 Either SUB mode or BCD mode can be selected. ^*3 AC power supply can be used when the LS-S11 (AC power supply stand) is connected.

Keyence LS-7001 Keyence

$4,132.20

Only 9 units left

Specifications

Model			LS-7001^*1
Type			Standard
No. of connectable sensor heads			2 (fully compatible for all head types except monitor (M) models)
Display	Measurement display		Main display: 7-segment red LED (Character height: 20.3 mm 0.80") Sub-display: 7-segment red LED (Character height: 9.9 mm 0.39") x 3
	Minimum display unit		0.01 µm to 100 µm (7-level selectable)
	Display range		±99.99999 to ±9,999.9 mm ±3.937" to ±393.7" (Linked to minimum display unit setting, mm/µm selectable)
	Measurement position monitor		7-level display with a red LED
	Tolerance check output display		Green LED (GO), Red LED x 2 (HI, LO)
Input terminal block	Synchronous 1, 2 input		Non-voltage input for OUT1
	Auto-zero 1, 2 input
	Reset 1, 2 input
	Statistics 1, 2 input		-
	Program selection input		Non-voltage input x 4 inputs
Output terminal	Analog voltage output		±10 V x 2 outputs
	Alarm output		NPN open-collector output (N.C.)
	Total judgment output		NPN open-collector output for OUT1
	Comparator ready output
	Strobe 1, 2 output
Connector I/O	SUB mode	Statistical processing output	-
		Function output	Selectable from focus, area check, and differential, NPN open-collector output x 2 outputs^*2
		5-level comparator output	NPN open-collector output for OUT2^*2
		Comparator ready output
		Strobe output
	BCD mode	BCD output	Measurement data output (Sign + 7 digits), OUT1/OUT2 selectable, NPN open-collector output^*2
		BCD selection output	NPN open-collector output^*2
		BCD selection input	Non-voltage input^*2
	Statistical processing input		-
	Synchronous input		Non-voltage input for OUT2
	Reset input
	Auto-zero input
Interface	RS-232C		Measurement data output and control I/O, printer (Baud rate can be selected up to 115,200 bps.)
Video output			-
Major functions			Simultaneous measurement, Area designation, Calculation, Averaging, Calibration, 16-program memory, Measurement modes, Auto-zero,Print-out, Abnormal value elimination, Transparent object measurement, Mutual interference prevention, etc.
Rating	Power voltage		24 VDC ±10 %^*3
	Power consumption		0.7 A max.^*3
Environmental resistance	Enclosure rating		IP64 (Panel surface only)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		35 to 85 % RH (No condensation)
Weight			Approx. 820 g
^1 The rating of the NPN open-collector inside the terminal block is: 100 mA max. (40 V max.), residual voltage of 0.5 V max. The rating of the NPN open-collector inside the connector I/O is: 30 mA max. (30 V max.), residual voltage of 0.5 V max. The rating of non-voltage input is: ON voltage of 1 V max., OFF current of 0.6 mA max. ^2 Either SUB mode or BCD mode can be selected. ^*3 AC power supply can be used when the LS-S11 (AC power supply stand) is connected.

Keyence OP-87036 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87035 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CB-A10E Keyence

$0.00

Sold Out

Specifications

Model				CB-A10E
Length				10 m 32.81'
Weight				Approx. 750 g

Keyence OP-82125 Keyence

$728.78

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence TM-H1 Keyence

$0.00

Sold Out

Specifications

Model				TM-H1^*1
Type				Setup software for the TM-3000 Series
Operating System				Windows 11 Pro Windows 10^2 Windows 7 (SP1 or later)^3 Windows Vista (SP2 or later)^4 Windows XP (SP3 or later)^5
CPU				Pentium III 1GHz or more (1.7GHz or more recommended)
Memory capacity				512MB or more (1GB or more recommended)
Available hard disk space				1GB or more
Display				XGA (1024 x 768 pixels) or greater, 256 colors or greater
PC interface				Includes one of the following^6: USB2.0/1.1^7 or Ethernet^*8
^1 Use this software in recommended environments according to your OS. ^2 Compatible with each edition of Home, Pro, and Enterprise. ^3 Compatible with each edition of Home Premium, Professional, Ultimate. ^4 Compatible with each edition of Ultimate, Business, Home Premium and Home Basic. ^5 Compatible with each edition of Professional and Home Edition. ^6 Select one for communication. Multiple interfaces cannot be used for communication at the same time. ^7 Function is not guaranteed when connected through a USB hub. ^8 Function is not guaranteed when connected through a router or a LAN connection.

Keyence CA-MP81 Keyence

$466.50

Only 9 units left

Specifications

Model		CA-MP81
Display panel	Display color	a-Si, TFT active matrix method
		262144
	No. of dots	800 (W) x 600 (H) dots
	Active display area	170.4 mm (W) x 127.8 mm (H) 6.709" x 5.031"
Backlight	Method	One-way cold cathode fluorescent tube
Structure		Panel-mount type, Only the front face is dust-proof and splash-proof equivalent to IP65f.
Backlight	Duration	Approx. 50,000 hours (average) (When installed in an upright position under 25 °C 77°F)
Input/Output	Input signal	Analog RGB signal (0.7 Vp-p, 75 Ω), Horizontal/vertical synchronization signal
	Input signal mode	800 (W) x 600 (H), Vertical frequency: 60 Hz
	Connector	High-density D-sub 15-pin female (3-way, inch screw)
Rating	Power voltage	24 VDC ±10 %
	Current consumption.	1 A max.
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 1,200 g

Keyence TM-065 Keyence

$6,595.97

In stock, 11 units

Specifications

Model		TM-065
Measuring range		ø65 mm 2.56"
Minimum detectable object		0.5 mm 0.02"
Transmitter/receiver distance		270 mm 10.63"
Light source		InGaN Green LED
Measurement accuracy		±3 µm ±0.000119"^*1
Repeatability		±0.2 µm 0.000008" ^*2
Sampling cycle (trigger interval)		5.5ms (33ms at the initial setting)^*3
Environmental resistance	Enclosure rating	IP64^*4
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
Material		Aluminum
Weight	Transmitter	Approx 1280 g
	Receiver	Approx 1460 g
	Base	Approx 1500 g
^1 Error when measuring width of KEYENCE standard object (glass calibration scale) in a measurement area of 20 mm 0.79"× ø40 mm ø1.57". ^2 Value of ±2σ measuring the width of KEYENCE standard object (glass calibration scale) in the center of the measurement area, an average 16 times, average 14 mm 0.55" line. ^3 When measurement area is minimum, others are initial settings ^4 Apart from connector component

Keyence TM-040 Keyence

$2,753.42

Only 1 unit left

Specifications

Model		TM-040
Measuring range		ø40 mm 1.57"
Minimum detectable object		0.3 mm 0.01"
Transmitter/receiver distance		180 mm 7.09"
Light source		InGaN Green LED
Measurement accuracy		±2 µm 0.000079" ^*1
Repeatability		±0.15 µm ±0.000006" ^*2
Sampling cycle (trigger interval)		5.5ms (33ms at the initial setting)^*3
Environmental resistance	Enclosure rating	IP64^*4
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
Material		Aluminum
Weight	Transmitter	Approx 560 g
	Receiver	Approx 720 g
	Base	Approx 630 g
^1 In a measurement area of 10 mm 0.39"× ø26 mm ø1.02" error when measuring width of KEYENCE standard object (glass calibration scale). ^2 Value of ±2σ measuring the width of KEYENCE standard object (glass calibration scale) in the center of the measurement area, an average 16 times, average 8 mm 0.31" line. ^3 When measurement area is minimum, others are initial settings ^4 Apart from connector component

Keyence TM-006 Keyence

$0.00

Sold Out

Specifications

Model		TM-006
Measuring range		ø6 mm 0.24"
Minimum detectable object		0.04 mm 0.001"
Transmitter/receiver distance		60 mm 2.36"
Light source		GaN Green LED
Measurement accuracy		±0.5 µm ±0.000020" ^*1
Repeatability		±0.06 µm^*2
Sampling cycle (trigger interval)		5.5ms (33ms at the initial setting)^*3
Environmental resistance	Enclosure rating	IP64^*4
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
Material		Aluminum
Weight	Transmitter	Approx 140 g
	Receiver	Approx 340 g
	Base	Approx 220 g
^1 In a measurement area of 2 mm 0.08"× ø4 mm ø0.16" error when measuring width of KEYENCE standard object (glass calibration scale). ^2 Value of ±2σ measuring the width of KEYENCE standard object (glass calibration scale) in the centre of the measurement area, an average 16 times, average 1.3 mm 0.05" line. ^3 When measurement area is minimum, others are initial settings ^4 Apart from connector component

Keyence TM-3001P Keyence

$5,061.58

Only 2 units left

Specifications

Model		TM-3001P
Head compatibility		Compatible
Number of connectable sensors		2 units max.^*1
Display	Minimum display unit	0.01 µm, 0.001 mm², 0.01 °
	Maximum display range	±9999.99 mm ±393.7", ±99999.9 mm², ±99999.9°
Input terminal block	Laser remote interlock input	Non-voltage input^*2
	Trigger input (for Head A)	Voltage input^*2
	Timing 1 input
	Auto-zero 1 input
	Reset input
Output terminal block	Analog voltage output	±10 V x 2 outputs, out put impedance: 100 Ω^*2
	Total judgment output	PNP open-collector output^*2
	Error output	PNP open-collector output (N.C.)^*2
	Process output	PNP open-collector output^*2
	Trigger input enable output
	Adjusted error output
Expansion connector	Trigger input (for Head A)	Voltage input^*2
	Timing 2 input
	Auto-zero 2 input
	Program switching input	Voltage input, 4 inputs^*2
	Memory card save input	Voltage input^*2
	Judgment/Binary output	3-level judgment output: OUT1 to OUT16, total judgment output Binary output: OUT1 to OUT16 measured data output (21 bits) PNP open-collector output^*3
	Strobe output	PNP open-collector output^*2
	Trigger input enable output
Analog RGB monitor output		SVGA (800 x 600 pixels)
RS-232C interface		Measured data output and control input/output (Maximum baud rate: 115200 bps, selectable)
USB interface		In conformity with USB Revision 2.0 HI-SPEED (USB 1.1 Full-SPEED compatible)
Ethernet interface		1000BASE-T/1000 BASE-TX/10 BASE-T
Memory card		SD card CA-SD4G (4GB), CA-SD1G (1GB) support
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption.	1 head connected 480mA max./ 2 heads connected 550mA max.
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
Material		Polycarbonate
Weight		Approx. 1,120 g
^1 1 or 2 units can be connected only with the same head model ^2 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA) ^*3 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA). OUT 1 to OUT 8 decision result, OUT 9 to OUT 16 decision result, time share output of binary measurement data.

Keyence TM-3001 Keyence

$2,986.97

Only 3 units left

Specifications

Model		TM-3001
Head compatibility		Compatible
Number of connectable sensors		2 units max.^*1
Display	Minimum display unit	0.01 µm, 0.001 mm², 0.01 °
	Maximum display range	±9999.99 mm ±393.7", ±99999.9 mm², ±99999.9°
Input terminal block	Laser remote interlock input	Non-voltage input^*2
	Trigger input (for Head A)
	Timing 1 input
	Auto-zero 1 input
	Reset input
Output terminal block	Analog voltage output	±10 V x 2 outputs, out put impedance: 100 Ω^*2
	Total judgment output	NPN open-collector output^*2
	Error output	NPN open-collector output (N.C.)^*2
	Process output	NPN open-collector output^*2
	Trigger input enable output
	Adjusted error output
Expansion connector	Trigger input (for Head A)	Non-voltage input^*2
	Timing 2 input
	Auto-zero 2 input
	Program switching input	Non-voltage input, 4 inputs^*2
	Memory card save input	Non-voltage input^*2
	Judgment/Binary output	3-level judgment output: OUT1 to OUT16, total judgment output Binary output: OUT1 to OUT16 measured data output (21 bits) NPN open-collector output^*3
	Strobe output	NPN open-collector output^*2
	Trigger input enable output
Analog RGB monitor output		SVGA (800 x 600 pixels)
RS-232C interface		Measured data output and control input/output (Maximum baud rate: 115200 bps, selectable)
USB interface		In conformity with USB Revision 2.0 HI-SPEED (USB 1.1 Full-SPEED compatible)
Ethernet interface		1000BASE-T/1000 BASE-TX/10 BASE-T
Memory card		SD card CA-SD4G (4GB), CA-SD1G (1GB) support
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption.	1 head connected 480mA max./ 2 heads connected 550mA max.
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
Material		Polycarbonate
Weight		Approx. 1,120 g
^1 1 or 2 units can be connected only with the same head model ^2 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA) ^*3 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA). OUT 1 to OUT 8 decision result, OUT 9 to OUT 16 decision result, time share output of binary measurement data.

Keyence TM-3000 Keyence

$405.00

Only 1 unit left

Specifications

Model		TM-3000
Head compatibility		Compatible
Number of connectable sensors		2 units max.^*1
Display	Minimum display unit	0.01 µm, 0.001 mm², 0.01 °
	Maximum display range	±9999.99 mm ±393.7", ±99999.9 mm², ±99999.9°
Input terminal block	Laser remote interlock input	Non-voltage input^*2
	Trigger input (for Head A)
	Timing 1 input
	Auto-zero 1 input
	Reset input
Output terminal block	Analog voltage output	±10 V x 2 outputs, out put impedance: 100 Ω^*2
	Total judgment output	NPN open-collector output^*2
	Error output	NPN open-collector output (N.C.)^*2
	Process output	NPN open-collector output^*2
	Trigger input enable output
	Adjusted error output
Expansion connector	Trigger input (for Head A)	Non-voltage input^*2
	Timing 2 input
	Auto-zero 2 input
	Program switching input	Non-voltage input, 4 inputs^*2
	Memory card save input	Non-voltage input^*2
	Judgment/Binary output	3-level judgment output: OUT1 to OUT16, total judgment output Binary output: OUT1 to OUT16 measured data output (21 bits) NPN open-collector output^*3
	Strobe output	NPN open-collector output^*2
	Trigger input enable output
Analog RGB monitor output		SVGA (800 x 600 pixels)
RS-232C interface		Measured data output and control input/output (Maximum baud rate: 115200 bps, selectable)
USB interface		In conformity with USB Revision 2.0 HI-SPEED (USB 1.1 Full-SPEED compatible)
Ethernet interface		1000BASE-T/1000 BASE-TX/10 BASE-T
Memory card		SD card CA-SD4G (4GB), CA-SD1G (1GB) support
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption.	1 head connected 480mA max./ 2 heads connected 550mA max.
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
Material		Polycarbonate
Weight		Approx. 1,120 g
^1 1 or 2 units can be connected only with the same head model ^2 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA) ^*3 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA). OUT 1 to OUT 8 decision result, OUT 9 to OUT 16 decision result, time share output of binary measurement data.

Keyence OP-90755 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87076 Keyence

$0.00

Sold Out

Specifications

Model				OP-87076
Applicable product				IG
Note				Attached to the panel indicator. Please use when missing or damaging.
Weight				Approx. 6 g

Keyence OP-84338 Keyence

$0.00

Sold Out

Specifications

Model				OP-84338
Overview				Connection connector to a display unit. Needed when cutting the cable.
Applicable product				GT2
Number included				2 pcs.
Note				Adjustable cable diameter: 1.15 to 1.35mm (Cable external diameter)

Keyence OP-8155 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-8154 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-4122 Keyence

$0.00

Sold Out

Specifications

Model				OP-4122
Overview				48x48 panel mounting ring.
Applicable product				AP-80
Note				Attached to the panel type indicator. Please use when missing or damaging.
Weight				Approx. 7 g

Keyence OP-25218 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IG-TB02 Keyence

$0.00

Sold Out

Specifications

Model				IG-TB02
Type				Fittings
Applicable product				IG-028
Note				Screws for the purpose of connecting the sensor head and mounting brackets are included.
Weight				Approx. 40 g

Keyence IG-TB01 Keyence

$0.00

Sold Out

Specifications

Model				IG-TB01
Type				Fittings
Applicable product				IG-010
Note				Screws for the purpose of connecting the sensor head and mounting brackets are included.
Weight				Approx. 50 g

Previous Page 26 / 30Next

Filters

In stock (381)
Out of stock (662)