Measurement Sensors

Filters

In stock (381)
Out of stock (662)

Showing 625 - 648 of 719 products

Keyence OP-87433 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87432 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-60412 Keyence

$0.00

Sold Out

Specifications

Model				OP-60412
Overview				This is a communication unit for use when using the fixation bracket. Use this when installing units without a DIN rail. This can be installed without a DIN rail.
Applicable product				DL

Keyence OP-87431 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87349 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87059 Keyence

$344.30

Only 5 units left

Specifications

Model				OP-87059
Type				Sensor head cable
Applicable product				IL,IG,GV-T Series head
Cable end				M8 straight - e-con
Length				20 m 65.62'
Material				Cable: Polyvinyl chloride (PVC)
Note				The cable is common to the transmitter and receiver sides, and can be used on either of them.
Weight				Approx. 680 g

Keyence OP-87058 Keyence

$216.12

In stock, 11 units

Specifications

Model				OP-87058
Type				Sensor head cable
Applicable product				IL,IG,GV-T Series head
Cable end				M8 straight - e-con
Length				10 m 32.81'
Material				Cable: Polyvinyl chloride (PVC)
Note				The cable is common to the transmitter and receiver sides, and can be used on either of them.
Weight				Approx. 360 g

Keyence OP-87056 Keyence

$165.95

Only 7 units left

Specifications

Model				OP-87056
Type				Sensor head cable
Applicable product				IL,IG,GV-T Series head
Cable end				M8 straight - e-con
Length				2 m 6.56'
Material				Cable: Polyvinyl chloride (PVC)
Note				The cable is common to the transmitter and receiver sides, and can be used on either of them.
Weight				Approx. 80 g

Keyence OP-85498 Keyence

$0.00

Sold Out

Specifications

Model				OP-85498
Type				Connector Cable
Applicable product				M8 connector sensor
Cable end				M8 straight - M8 straight
Length				2 m 6.56'
Material				Cable: Polyvinyl chloride (PVC)
Weight				Approx. 55 g

Keyence OP-35361 Keyence

$172.29

Only 6 units left

Specifications

Model				OP-35361
Type				Expansion cable
Applicable product				KV
Length				300 mm 11.81"
Note				For the total expansion unit/QL adapter, Cannot be used with the KL-N10V.
Weight				Approx. 10 g

Keyence IG-H1 Keyence

$0.00

Sold Out

Specifications

Model				IG-H1
Type				PC configuration software
Applicable product				IG Series
Note				Purchase this along with the DL-RS1A communication unit.

Keyence OP-26751 Keyence

$125.81

Only 9 units left

Specifications

Model				OP-26751
Type				End unit
Overview				Used to secure the amplifier when main and expansion units are additionally set.
Applicable product				Expansion type sensor amplifier including FS-N10 Series.
Number included				2 pcs.
Material				Polycarbonate, stainless steel, Screw: Steel (Nickel plated)
Note				When adding sensor amplifier, use DIN rail and surely use end unit at both ends.

Keyence IG-010 Keyence

$878.33

Only 9 units left

Specifications

Model		IG-010
Operation principle		CCD method
Light source	Wavelength	660 nm (Visible light semiconductor laser)
	FDA	Class 1^*1
	IEC/JIS	Class 1
Mounting distance		0 to 1000 mm 39.37"
Measurement range		10 mm 0.39"
Sampling cycle		980 µs (When the number of times for averaging is set to [hsp]: 490 µs)
Minimum detectable object	High sensitivity mode	ø0.1 mm ø0.003" (Setting distance: 100 mm 3.94")^*2
	Standard mode	ø0.2 mm ø0.007" (Setting distance: 40 mm 1.57" or less), ø0.5 mm ø0.02" (Setting distance: 500 mm 19.68")^*2
Repeatability		5 µm 0.20 Mil (Setting distance: 100 mm 3.94") 10 µm 0.39 Mil (Setting distance: 500 mm 19.68") 80 µm 3.15 Mil (Setting distance: 1,000 mm 39.37")^*3
Linearity		±0.28 % of F.S. (±28 µm ±1.10 Mil)^*4
Temperature characteristics		±0.03 % of F.S./°C (±3 µm ±0.12 Mil/°C)^*5
Operation indicator	Transmitter	Optical axis alignment indicator: Green LED, Power indicator: Green LED
	Receiver	Optical axis alignment indicator: Green LED, Position monitor: Dual bar LED (Red, Green)
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp: 5,000 lux, Sunlight: 5,000 lux^*6
	Ambient temperature	-10 to +45 °C 14 to 113 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material	Case	Zinc die-cast (Lower case), PBT (Upper case), Polyarylate (PAR) (Display part), SUS304 (Metallic part)
	Lens cover	Glass
	Cable	PVC
Accessories		Transmitter × 1, Receiver × 1, Sensor head cables (2 m 6.56') × 2
Weight		Approx. 380 g (including supplied items)
^1 The classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 When the measurement target object is measured at the center position of the setting distance. When the measurement mode is set to the glass edge mode, a glass edge of C0.1 mm 0.003" or more can be detected (Setting distance: 500 mm 19.69"). ^3 When the light is shielded by half at the center position of the setting distance. Vibration width when the average number of times is set to 16 and sampling is performed for 30 seconds. (When the analog output is used, the margin of error of analog output is added.) ^4 When the setting distance is 100 mm 3.94" and light is shielded at 50 mm 1.96"position from the receiver. Margin of error to the ideal line. ^5 When the setting distance is 100 mm 3.94" and light is shielded by half at 50 mm 1.96" position from the receiver. ^6 Excluding when the average number of times is set to [hsp].

Keyence IG-1550 Keyence

$2,132.92

Only 3 units left

Specifications

Model		IG-1550
Type		Panel mount
Main unit/Expansion unit		Expansion unit
Analog output		No
Power consumption (including analog current output)	Normal	2880 mW or less (at 30 V: 96 mA or less)^*1
	Power saving function (HALF)	2300 mW (at 30 V: 77 mA or less)^*1
	Power saving function (ALL)	2200 mW (at 30 V: 74 mA or less)^*1
Digital display method		Dual 7-seg display Upper level: Red/Green, 2 colors, 5 digits Lower level: Green, 5 digits
Display range		-99.999 to +99.999, -99.99 to +99.99, -99.9 to +99.9, -99 to +99 (selectable)
Display resolution		1 µm 0.04 Mil, 10 µm 0.39 Mil, 100 µm 3.94 Mil, 1,000 µm 39.37 Mil (selectable)
Output	Judgement output (selectable between NPN and PNP)	NPN (PNP) open collector x3ch, 30 VDC (Power supply voltage) or less, residual voltage 1 V (2 V) or less, N.O./N.C. selectable Max. 50 mA/ch ^*2
	Response time (judgement output)	1.96 to 4031.72 ms ^*3
	Edge check output (selectable between NPN and PNP)	NPN (PNP) open collector x1ch, 30 VDC (Power supply voltage) or less, residual voltage 1 V (2 V) or less, N.O./N.C. selectable Max. 50 mA, ^*2 response time 20 ms
Analog voltage output		None
Analog current output
Input	Gain input	Input time: 20 ms or more, Response delay time: 120 ms or less (Nonvolatile memory (EEPROM) 1.5 s or less)
	Reset input	Input time: 20 ms or more, Response delay time: 20 ms or less
	Timing input	Input time: 2 ms or more, Response delay time: 2 ms or less
	Zero shift input	Input time: 20 ms or more, Response delay time: 20 ms or less
	Bank A input/Bank B input	Input time: 20 ms or more, Response delay time: 20 ms or less ^*3
	Laser emission stop input	Input time: 2 ms or more, Response delay time: 2 ms or less
Rating	Power voltage	10 to 30 VDC, including Ripple (P-P) 10 %, Class 2 or LPS
Environmental resistance	Pollution degree	2
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material		Main unit case/Front sheet: Polycarbonate, Key top: Polyacetal, Cable: PVC
Accessories		Main body × 1, Panel mounting bracket × 1, Front protection cover × 1, Power supply and input/output cable (2 m 6.56') × 1, Expansion cable (50 mm 1.97") × 1
Weight		Approx. 165 g (including supplied items)
^1 The power consumption with slave units installed is the total of each amplifier unit's power consumption. ^2 When expansion units are added: Max. 20 mA/ch ^*3 For more details, refer to the User's Manual.

Keyence IG-1500 Keyence

$967.65

In stock, 11 units

Specifications

Model				IG-1500
Type				Panel mount
Main unit/Expansion unit				Main unit
Analog output				Yes
Power consumption (including analog current output)	Normal			2880 mW or less (at 30 V: 96 mA or less)^*1
	Power saving function (HALF)			2300 mW (at 30 V: 77 mA or less)^*1
	Power saving function (ALL)			2200 mW (at 30 V: 74 mA or less)^*1
Digital display method				Dual 7-seg display Upper level: Red/Green, 2 colors, 5 digits Lower level: Green, 5 digits
Display range				-99.999 to +99.999, -99.99 to +99.99, -99.9 to +99.9, -99 to +99 (selectable)
Display resolution				1 µm 0.04 Mil, 10 µm 0.39 Mil, 100 µm 3.94 Mil, 1,000 µm 39.37 Mil (selectable)
Output	Judgement output (selectable between NPN and PNP)			NPN (PNP) open collector x3ch, 30 VDC (Power supply voltage) or less, residual voltage 1 V (2 V) or less, N.O./N.C. selectable Max. 50 mA/ch ^*2
	Response time (judgement output)			1.96 to 4031.72 ms ^*3
	Edge check output (selectable between NPN and PNP)			NPN (PNP) open collector x1ch, 30 VDC (Power supply voltage) or less, residual voltage 1 V (2 V) or less, N.O./N.C. selectable Max. 50 mA, ^*2 response time 20 ms
	Analog output (selectable among ±5V, 1-5 V, 0-5 V, 4-20 mA)	Voltage output	Output range	±5 V (full scale 10 V)
			Output resistance	100 Ω
			Maximum load resistance	―
			Repetition accuracy	±1 mV
			Display accuracy	±0.05% of F.S.
			Temperature characteristics	±0.005% of F.S./°C
			Update cycle	Same as sensor head sampling cycle
			Response time	Same as Response time (judgement output)
			Time constant	10 µs (90 % response)^*4
		Current output	Output range	4-20 mA (full scale 16 mA)
			Output resistance	―
			Maximum load resistance	350 Ω
			Repetition accuracy	±1.5 µA
			Display accuracy	±0.25% of F.S.
			Temperature characteristics	±0.01% of F.S./°C
			Update cycle	Same as sensor head sampling cycle
			Response time	Same as Response time (judgement output)
			Time constant	30 µs (90 % response)^*4
Input	Gain input			Input time: 20 ms or more, Response delay time: 120 ms or less (Nonvolatile memory (EEPROM) 1.5 s or less)
	Reset input			Input time: 20 ms or more, Response delay time: 20 ms or less
	Timing input			Input time: 2 ms or more, Response delay time: 2 ms or less
	Zero shift input			Input time: 20 ms or more, Response delay time: 20 ms or less
	Bank A input/Bank B input			Input time: 20 ms or more, Response delay time: 20 ms or less ^*3
	Laser emission stop input			Input time: 2 ms or more, Response delay time: 2 ms or less
Rating	Power voltage			10 to 30 VDC, including Ripple (P-P) 10 %, Class 2 or LPS
Environmental resistance	Pollution degree			2
	Ambient temperature			-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity			35 to 85 % RH (No condensation)
	Vibration resistance			10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material				Main unit case/Front sheet: Polycarbonate, Key top: Polyacetal, Cable: PVC
Accessories				Main body × 1, Panel mounting bracket × 1, Front protection cover × 1, Power supply and input/output cable (2 m 6.56') × 1, Instruction manual × 1
Weight				Approx. 170 g (including supplied items)
^1 The power consumption with slave units installed is the total of each amplifier unit's power consumption. ^2 When expansion units are added: Max. 20 mA/ch ^3 For more details, refer to the User's Manual. ^4 Delay time that occurs from the analog output circuit after the judgment is output.

Keyence IG-1050 Keyence

$525.00

Only 5 units left

Specifications

Model		IG-1050
Type		DIN rail mount
Main unit/Expansion unit		Expansion unit
Analog output		No
Power consumption (including analog current output)	Normal	2700 mW or less (at 30 V: 90 mA or less)^*1
	Power saving function (HALF)	2300 mW (at 30 V: 77 mA or less)^*1
	Power saving function (ALL)	2200 mW (at 30 V: 74 mA or less)^*1
Digital display method		Dual 7-seg display Upper level: Red, 5 digits Lower level: Green, 5 digits
Display range		-99.999 to +99.999, -99.99 to +99.99, -99.9 to +99.9, -99 to +99 (selectable)
Display resolution		1 µm 0.04 Mil, 10 µm 0.39 Mil, 100 µm 3.94 Mil, 1,000 µm 39.37 Mil (selectable)
Output	Judgement output (selectable between NPN and PNP)	NPN (PNP) open collector x3ch, 30 VDC (Power supply voltage) or less, residual voltage 1 V (2 V) or less, N.O./N.C. selectable Max. 50 mA/ch ^*2
	Response time (judgement output)	1.96 to 4031.72 ms ^*3
	Edge check output (selectable between NPN and PNP)	NPN (PNP) open collector x1ch, 30 VDC (Power supply voltage) or less, residual voltage 1 V (2 V) or less, N.O./N.C. selectable Max. 50 mA, ^*2 response time 20 ms
Analog voltage output		None
Analog current output
Input	Gain input	Input time: 20 ms or more, Response delay time: 120 ms or less (Nonvolatile memory (EEPROM) 1.5 s or less)
	Reset input	Input time: 20 ms or more, Response delay time: 20 ms or less
	Timing input	Input time: 2 ms or more, Response delay time: 2 ms or less
	Zero shift input	Input time: 20 ms or more, Response delay time: 20 ms or less
	Bank A input/Bank B input	Input time: 20 ms or more, Response delay time: 20 ms or less ^*3
	Laser emission stop input	Input time: 2 ms or more, Response delay time: 2 ms or less
Rating	Power voltage	10 to 30 VDC, including Ripple (P-P) 10 %, Class 2 or LPS
Environmental resistance	Pollution degree	2
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material		Main unit case/Front sheet: Polycarbonate, Key top: Polyacetal, Cable: PVC
Accessories		Main body × 1
Weight		Approx. 140 g (including supplied items)
^1 The power consumption with slave units installed is the total of each amplifier unit's power consumption. ^2 When expansion units are added: Max. 20 mA/ch ^*3 For more details, refer to the User's Manual.

Keyence IG-1000 Keyence

$471.23

In stock, 16 units

Specifications

Model				IG-1000
Type				DIN rail mount
Main unit/Expansion unit				Main unit
Analog output				Yes
Power consumption (including analog current output)	Normal			2700 mW or less (at 30 V: 90 mA or less)^*1
	Power saving function (HALF)			2300 mW (at 30 V: 77 mA or less)^*1
	Power saving function (ALL)			2200 mW (at 30 V: 74 mA or less)^*1
Digital display method				Dual 7-seg display Upper level: Red, 5 digits Lower level: Green, 5 digits
Display range				-99.999 to +99.999, -99.99 to +99.99, -99.9 to +99.9, -99 to +99 (selectable)
Display resolution				1 µm 0.04 Mil, 10 µm 0.39 Mil, 100 µm 3.94 Mil, 1,000 µm 39.37 Mil (selectable)
Output	Judgement output (selectable between NPN and PNP)			NPN (PNP) open collector x3ch, 30 VDC (Power supply voltage) or less, residual voltage 1 V (2 V) or less, N.O./N.C. selectable Max. 50 mA/ch ^*2
	Response time (judgement output)			1.96 to 4031.72 ms ^*3
	Edge check output (selectable between NPN and PNP)			NPN (PNP) open collector x1ch, 30 VDC (Power supply voltage) or less, residual voltage 1 V (2 V) or less, N.O./N.C. selectable Max. 50 mA, ^*2 response time 20 ms
	Analog output (selectable among ±5V, 1-5 V, 0-5 V, 4-20 mA)	Voltage output	Output range	±5 V (full scale 10 V)
			Output resistance	100 Ω
			Maximum load resistance	―
			Repetition accuracy	±1 mV
			Display accuracy	±0.05% of F.S.
			Temperature characteristics	±0.005% of F.S./°C
			Update cycle	Same as sensor head sampling cycle
			Response time	Same as Response time (judgement output)
			Time constant	10 µs (90 % response)^*4
		Current output	Output range	4-20 mA (full scale 16 mA)
			Output resistance	―
			Maximum load resistance	350 Ω
			Repetition accuracy	±1.5 µA
			Display accuracy	±0.25% of F.S.
			Temperature characteristics	±0.01% of F.S./°C
			Update cycle	Same as sensor head sampling cycle
			Response time	Same as Response time (judgement output)
			Time constant	30 µs (90 % response)^*4
Input	Gain input			Input time: 20 ms or more, Response delay time: 120 ms or less (Nonvolatile memory (EEPROM) 1.5 s or less)
	Reset input			Input time: 20 ms or more, Response delay time: 20 ms or less
	Timing input			Input time: 2 ms or more, Response delay time: 2 ms or less
	Zero shift input			Input time: 20 ms or more, Response delay time: 20 ms or less
	Bank A input/Bank B input			Input time: 20 ms or more, Response delay time: 20 ms or less ^*3
	Laser emission stop input			Input time: 2 ms or more, Response delay time: 2 ms or less
Rating	Power voltage			10 to 30 VDC, including Ripple (P-P) 10 %, Class 2 or LPS
Environmental resistance	Pollution degree			2
	Ambient temperature			-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity			35 to 85 % RH (No condensation)
	Vibration resistance			10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material				Main unit case/Front sheet: Polycarbonate, Key top: Polyacetal, Cable: PVC
Accessories				Main body × 1, Instruction manual × 1
Weight				Approx. 150 g (including supplied items)
^1 The power consumption with slave units installed is the total of each amplifier unit's power consumption. ^2 When expansion units are added: Max. 20 mA/ch ^3 For more details, refer to the User's Manual. ^4 Delay time that occurs from the analog output circuit after the judgment is output.