Measurement Sensors

Filters

In stock (381)
Out of stock (662)

Showing 1 - 24 of 719 products

$884.78

In stock, 14 units

Specifications

Model		GT2-P12K^*1
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.1 μm 0.004 Mil
Indicated accuracy		1 µm 0.04 Mil (p-p)^*2
Measuring force	Downward mounting	1.0 N^*3
	Side mounting	0.95 N^*3
	Upward mounting	0.9 N^*3
Sampling cycle		4 ms
Mechanical response		10 Hz^*2
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67G (JIS)^4, IP67 (IEC), NEMA Type 13^4
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT
	Dust boot	NBR
	Contact	SUS304, cemented tungsten carbide^*5
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 35 g (excluding cable)^*6
^1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased. For details, contact your local sales office. ^2 Value when the ambient temperature is 20 °C 68 °F. ^3 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^4 When an M8 oil-resistant cable (GT2-CHP2M/CHP5M/CHP10M) is used for the sensor head cable. ^5 The contact is included with the sensor. ^6 Including the relay connector.

Keyence LK-G5001V Keyence

$2,253.37

Only 5 units left

Specifications

Model		LK-G5001V^1^2
Separate type		LK-G5001/LK-HD500
Type		Main controller
Sensor head compatibility		Compatible
No. of connectable sensor heads		2
Display	Minimum display unit	LK-HD500: 0.001 µm
	Display range	LK-HD500: ±999.999 µm to ±9,999.99 mm (7 settings selectable)
	Display cycle	LK-HD500: Approx. 10 times/sec.
Display interface	Display port	Either the display unit (LK-HD500) or dedicated touch panel (LK-HD1001) can be connected
	LED indicator	LASER ON
Terminal block	Analog output voltage	±10 V output, Output impedance: 100 Ω
	Analog current output	4 to 20 mA, Maximum load resistance: 350 Ω
	No. of analog outputs	2
	TIMING 1 input	Non-voltage input^*3
	RESET 1 input
	Auto-zero 1 input
	Laser control input	Non-voltage input^*4
	Laser remote input	Non-voltage input
	Alarm output	NPN open-collector output
	General comparator output
Expansion connector	TIMING input	Non-voltage input
	RESET input
	Auto-zero input
	Program switching input
	Binary selection input
	Alarm output	NPN open-collector output
	Comparator output
	Binary output
RS-232C interface		Baud rate: 9,600 to 115,200 bps Data length: 8 bits, Stop bit length: 1 bit, Parity: None/even/odd
USB interface		USB 2.0 Hi-Speed compliant^*5
Ethernet interface		100Base-TX/10Base-T^*6
EtherNet/IP™interface		Cyclic communication (implicit messaging) Message communication (explicit messaging) : UCMM and Class3 Number of connections: 32 Complies with conformance test version CT14^*7
PLC-Link		The following PLCs are supported:Mitsubishi Electric: MELSEC iQ-R Series, iQ-F Series, Q Series, L Series, FX Series EtherNet/IP™, CC-Link, and DeviceNet® cannot be used in conjunction with PLC-Link
Head expansion unit connector		Up to 10 head expansion units can be connected to one main controller
Expansion unit connector		Either of the CC-Link unit (LK-CC100) or DeviceNet® unit (LK-DN100) can be connected
Power supply	Power supply voltage	24 VDC ±10 %
	Maximum current consumption	0.6 A or less with 1 head/3.5 A or less with 12 heads
Environmental resistance	Ambient temperature	When one or less head expansion unit is connected: 0 to +50 °C 32 to 122 °F. When two or more head expansion units are connected: 0 to +40 °C 32 to 104 °F.
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 600 g
^1 NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max. ^2 Part of the input/output circuit of the LK-G5000 Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to "Precautions on wiring" in the User's Manual. ^3 This input is applied to all of the synchronized OUT. ^4 When the laser class 3B sensor head is connected, a key-operated switch must be used for the input to this terminal. The laser is emitted only when the key-operated switch is set to the ON position. (Select a key which can be removed only when it is set to the OFF position.) When the laser class 2/3R sensor head is connected, the laser turns on when this terminal is opened and turns off when it is short-circuited. ^5 When a PC supporting USB 1.1 or USB 2.0 full speed is connected, the data refresh cycle and other operations may slow down. ^6 Use the Ethernet interface only for direct connections with a PC or for local network connections with a PC or LK-G5000 Series units. ^*7 The EtherNet/IP™ interface cannot be used when a CC-Link unit or a DeviceNet® unit is installed. EtherNet/IP™ is supported by the latest controllers. For details on which controllers support EtherNet/IP™ , contact your nearest KEYENCE office.

Keyence LK-G5001 Keyence

$1,872.36

Only 6 units left

Specifications

Model		LK-G5001
Type		Separate type Main controller
Sensor head compatibility		Compatible
No. of connectable sensor heads		2
Display	Minimum display unit	0.001 µm
	Display range	±999.999 µm to ±9999.99 mm (7 settings selectable)
	Display cycle	Approx 10 times/sec.
Display interface	Display port	Either the display unit (LK-HD500) or dedicated touch panel (LK-HD1001) can be connected
	LED indicator	LASER ON
Terminal block	Analog output voltage	±10 V output, Output impedance: 100 Ω^*1
	Analog current output	4 to 20 mA, Maximum load resistance: 350 Ω^*1
	No. of analog outputs	2^*1
	TIMING 1 input	Non-voltage input^*2
	RESET 1 input
	Auto-zero 1 input
	Laser remote input	Non-voltage input^*1
	Alarm output	NPN open-collector output^*1
	General comparator output
Expansion connector	TIMING input	Non-voltage input^*1
	RESET input
	Auto-zero input
	Program switching input
	Binary selection input
	Alarm output	NPN open-collector output^*1
	Comparator output
	Binary output
RS-232C interface		Baud rate: 9600 to 115200 bps Data length: 8 bits Stop bit length: 1 bit Parity: None/even/odd
USB interface		USB 2.0 Hi-Speed compliant^*3
Ethernet interface		100Base-TX/10Base-T^*4
EtherNet/IP™interface		Cyclic communication (implicit messaging) Message communication (explicit messaging) : UCMM and Class3 Number of connections: 32 Complies with conformance test version CT14^*5
PLC-Link		The following PLCs are supported:Mitsubishi Electric: MELSEC iQ-R Series, iQ-F Series, Q Series, L Series, FX Series EtherNet/IP™, CC-Link, and DeviceNet® cannot be used in conjunction with PLC-Link
Head expansion unit connector		Up to 10 head expansion units can be connected to one main controller
Expansion unit connector		Either of the CC-Link unit (LK-CC100) or DeviceNet® unit (LK-DN100) can be connected
Power supply	Power supply voltage	24 VDC ±10%
	Maximum current consumption	0.6 A or less with 1 head/3.5 A or less with 12 heads
Environmental resistance	Ambient temperature	When one or less head expansion unit is connected: 0 to +50 °C 32 to 122 °F. When two or more head expansion units are connected: 0 to +40 °C 32 to 104 °F.
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 600 g
^1 NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. PNP open-collector output rating: 50 mA max. (30 V max.), Residual voltage: 0.5 V max. Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max. Voltage input rating: Maximum input rating: 26.4 V, ON voltage: 10.2 V, OFF current: 0.6 mA Part of the input/output circuit of the LK-G5000 Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to "Precautions on wiring" in the User's Manual. ^2 NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. PNP open-collector output rating: 50 mA max. (30 V max.), Residual voltage: 0.5 V max. Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max. Voltage input rating: Maximum input rating: 26.4 V, ON voltage: 10.2 V, OFF current: 0.6 mA Part of the input/output circuit of the LK-G5000 Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to "Precautions on wiring" in the User's Manual. This input is applied to all of the synchronized OUT. ^3 When a PC supporting USB 1.1 or USB 2.0 full speed is connected, the data refresh cycle and other operations may slow down. ^4 Use the Ethernet interface only for direct connections with a PC or for local network connections with a PC or LK-G5000 Series units. ^*5 The EtherNet/IP™ interface cannot be used when a CC-Link unit or a DeviceNet® unit is installed. EtherNet/IP™ is supported by the latest controllers. For details on which controllers support EtherNet/IP™ , contact your nearest KEYENCE office.

Keyence GT2-H12K Keyence

$595.28

In stock, 18 units

Specifications

Model		GT2-H12K
Detection system		Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range		12 mm 0.47"
Resolution		0.1 μm 0.004 Mil
Indicated accuracy		1 µm 0.04 Mil (p-p)^*1
Measuring force	Downward mounting	1.0 N^*2
	Side mounting	0.9 N^*2
	Upward mounting	0.8 N^*2
Sampling cycle		1 ms
Mechanical response		10 Hz^*1
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body cast: Zinc die-casting, Indicator: Polyarylate, Dust boot: NBR
	Dust boot	NBR
	Contact	TYPE304 Stainless steel, super-tough tungsten alloy^*3
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 95 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^*3 The contact is included with the sensor.

Keyence GT2-H12 Keyence

$522.89

In stock, 15 units

Specifications

Model		GT2-H12
Detection system		Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range		12 mm 0.47"
Resolution		0.5 μm 0.02 Mil
Indicated accuracy		2 µm 0.08 Mil (p-p)^*1
Measuring force	Downward mounting	1.0 N^*2
	Side mounting	0.9 N^*2
	Upward mounting	0.8 N^*2
Sampling cycle		1 ms
Mechanical response		10 Hz^*1
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body cast: Zinc die-casting, Indicator: Polyarylate, Dust boot: NBR
	Dust boot	NBR
	Contact	TYPE304, 440C Stainless steel^*3
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 95 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^*3 The contact is included with the sensor.

Keyence GT2-A50 Keyence

$1,111.83

In stock, 13 units

Specifications

Model		GT2-A50
Detection system		Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range		50 mm 1.97"
Resolution		0.5 μm 0.02 Mil
Indicated accuracy		3.5 µm 0.14 Mil (p-p)^*1
Measuring force	Downward mounting	3.2 N^*2
	Side mounting	2.8 N^*2
	Upward mounting	2.4 N^*2
Sampling cycle		1 ms
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67^*3
	Pressure resistance	1 MPa
	Applied pressure range	0.25 to 0.5 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions^*4
Materials	Main body	Main body case: Zinc die-casting; Cylinder part: Aluminium alloy; Air joint resin part: Polyacetal; Air joint metal part: Brass nickel plating; Indicator: Polyarylate
	Dust boot	NBR
	Contact	TYPE304, 440C Stainless steel^*5
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 405 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^3 Make sure the air tube is connected to the air exhaust joint and that no foreign materials enter inside from the joint. ^4 In the case where a mounting bracket D is used with GT2-A32 and GT2-A50, the double amplitude becomes 0.75 mm 0.03". ^*5 The contact is included with the sensor.

Keyence IG-028 Keyence

$967.65

In stock, 17 units

Specifications

Model		IG-028
Operation principle		CCD method
Light source	Wavelength	660 nm (Visible light semiconductor laser)
	FDA	Class 1^*1
	IEC/JIS	Class 1
Mounting distance		0 to 1500 mm 59.06"
Measurement range		28 mm 1.10"
Sampling cycle		980 µs (When the number of times for averaging is set to [hsp]: 490 µs)
Minimum detectable object	High sensitivity mode	ø0.1 mm ø0.003" (Setting distance: 100 mm 3.94")^*2
	Standard mode	ø0.2 mm ø0.007" (Setting distance: 50 mm 1.97" or less), ø0.5 mm ø0.02" (Setting distance: 500 mm 19.68")^*2
Repeatability		5 µm 0.20 Mil (Setting distance: 100 mm 3.94") 10 µm 0.39 Mil (Setting distance: 500 mm 19.68") 80 µm 3.15 Mil (Setting distance: 1,000 mm 39.37") 140 µm 5.51 Mil (Setting distance: 1,500 mm 59.06")^*3
Linearity		±0.1 % of F.S. (±28 µm ±1.10 Mil)^*4
Temperature characteristics		±0.01 % of F.S./°C (±3 µm ±0.12 Mil/°C)^*5
Operation indicator	Transmitter	Optical axis alignment indicator: Green LED, Power indicator: Green LED
	Receiver	Optical axis alignment indicator: Green LED, Position monitor: Dual bar LED (Red, Green)
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp: 5,000 lux, Sunlight: 5,000 lux^*6
	Ambient temperature	-10 to +45 °C 14 to 113 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material	Case	Zinc die-cast (Lower case), PBT (Upper case), Polyarylate (PAR) (Display part), SUS304 (Metallic part)
	Lens cover	Glass
	Cable	PVC
Accessories		Transmitter × 1, Receiver × 1, Sensor head cables (2 m 6.56') × 2
Weight		Approx. 500 g (including supplied items)
^1 The classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 When the measurement target object is measured at the center position of the setting distance. When the measurement mode is set to the glass edge mode, a glass edge of C0.1 mm 0.003" or more can be detected (Setting distance: 500 mm 19.69"). ^3 When the light is shielded by half at the center position of the setting distance. Vibration width when the average number of times is set to 16 and sampling is performed for 30 seconds. (When the analog output is used, the margin of error of analog output is added.) ^4 When the setting distance is 100 mm 3.94" and light is shielded at 50 mm 1.96"position from the receiver. Margin of error to the ideal line. ^5 When the setting distance is 100 mm 3.94" and light is shielded by half at 50 mm 1.96" position from the receiver. ^6 Excluding when the average number of times is set to [hsp].

Keyence IL-600 Keyence

$740.03

Only 10 units left

Specifications

Model		IL-600
Reference distance		600 mm 23.62"
Measurement range		200 to 1000 mm 7.87" to 39.37"
Light source	Type	Red semiconductor laser, wavelength: 655 nm (visible light)
	Laser class	Class 2 (FDA (CDRH) Part1040.10)^*1 Class 2 (IEC 60825-1)
	Output	560 µW
Spot diameter (at standard distance)		Approx. ø1.6 mm ø0.06"
Linearity		±0.25% of F.S. (200 to 600 mm 7.84" to 23.62")^2^3 ±0.5% of F.S. (200 to 1000 mm 7.84" to 39.37")^2^3
Repeatability		50 µm^*4
Sampling rate		0.33/1/2/5 ms (4 levels available)
Operation status indicators		Laser emission warning indicator: Green LED, Analog range indicator: Orange LED, Reference distance indicator: Red/Green LED
Temperature characteristics		0.08% of F.S./°C^*5
Environmental resistance	Enclosure rating	IP67
	Pollution degree	3
	Ambient light	Incandescent lamp: 5,000 lux^*6
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No condensation or freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Housing material: PBT, Metal parts: SUS304, Packing: NBR, Lens cover: Glass, Cable: PVC
Weight		Approx. 135 g
^1 The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice. ^2 Value when measuring the KEYENCE standard target (white diffuse object). ^3 F.S. of each model is as follows. IL-030: ±5 mm ±0.20" IL-065: ±10 mm ±0.39" IL-100: ±20 mm ±0.79" IL-300: ±140 mm ±5.51" IL-600: ±400 mm ±15.75" IL-2000: +1000 to -1500 mm 39.37" to -59.05" ^4 Value when measuring the KEYENCE standard target (white diffuse object) at the reference distance, sampling rate: 1 ms, and average number of times: 128. For the IL-300/IL-600, the sampling rate is 2 ms. For the IL-2000, the sampling rate is set to 5ms. ^5 F.S. of each model is as follows. IL-030: ±5 mm ±0.20" IL-065: ±10 mm ±0.39" IL-100: ±20 mm ±0.79" IL-300: ±140 mm ±5.51" IL-600: ±400 mm ±15.75" ^6 Value when the sampling rate is set to 2 ms or 5 ms.

Keyence IL-2000 Keyence

$1,405.11

In stock, 17 units

Specifications

Model		IL-2000^*1
Reference distance		2000 mm 78.74"
Measurement range		1000 to 3500 mm 39.37" to 137.80"
Light source	Type	Red semiconductor laser, wavelength: 655 nm (visible light)
	Laser class	Class 2 (FDA (CDRH) Part1040.10)^*2 Class 2 (IEC 60825-1)
	Output	560 µW
Spot diameter (at standard distance)		Approx. 1400 × 7000 µm
Linearity		±0.16% of F.S. (1000 to 3500 mm 39.37" to 137.80")^3^4
Repeatability		100 µm^*5
Sampling rate		0.33/1/2/5 ms (4 levels available)
Operation status indicators		Laser emission warning indicator: Green LED, Analog range indicator: Orange LED, Reference distance indicator: Red/Green LED
Temperature characteristics		0.016% of F.S./°C^*6
Environmental resistance	Enclosure rating	IP67
	Pollution degree	3
	Ambient light	Incandescent lamp: 10,000 lux^*7
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No condensation or freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Housing material: PBT, Metal parts: SUS304, Packing: NBR, Lens cover: Glass, Cable: PVC
Weight		Approx. 350 g
^1 Amplifiers purchased before August 8th, 2012 cannot be used. ^2 The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice. ^3 Value when measuring the KEYENCE standard target (white diffuse object). ^4 F.S. of each model is as follows. IL-030: ±5 mm ±0.20" IL-065: ±10 mm ±0.39" IL-100: ±20 mm ±0.79" IL-300: ±140 mm ±5.51" IL-600: ±400 mm ±15.75" IL-2000: +1000 to -1500 mm 39.37" to -59.05" ^5 Value when measuring the KEYENCE standard target (white diffuse object) at the reference distance, sampling rate: 1 ms, and average number of times: 128. For the IL-300/IL-600, the sampling rate is 2 ms. For the IL-2000, the sampling rate is set to 5ms. ^6 F.S. of each model is as follows. IL-030: ±5 mm ±0.20" IL-065: ±10 mm ±0.39" IL-100: ±20 mm ±0.79" IL-300: ±140 mm ±5.51" IL-600: ±400 mm ±15.75" ^*7 Value when the sampling rate is set to 2 ms or 5 ms.

Keyence IL-030 Keyence

$498.77

In stock, 16 units

Specifications

Model		IL-030
Reference distance		30 mm 1.18"
Measurement range		20 to 45 mm 0.79" to 1.77"
Light source	Type	Red semiconductor laser, wavelength: 655 nm (visible light)
	Laser class	Class 1 (FDA (CDRH) Part1040.10)^*1 Class 1 (IEC 60825-1)
	Output	220 µW
Spot diameter (at standard distance)		Approx. 200 × 750 µm
Linearity		±0.1% of F.S. (25 to 35 mm 0.98" to 1.38")^2^3
Repeatability		1 µm^*4
Sampling rate		0.33/1/2/5 ms (4 levels available)
Operation status indicators		Laser emission warning indicator: Green LED, Analog range indicator: Orange LED, Reference distance indicator: Red/Green LED
Temperature characteristics		0.05% of F.S./°C^*5
Environmental resistance	Enclosure rating	IP67
	Pollution degree	3
	Ambient light	Incandescent lamp: 5,000 lux^*6
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No condensation or freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Housing material: PBT, Metal parts: SUS304, Packing: NBR, Lens cover: Glass, Cable: PVC
Weight		Approx. 60 g
^1 The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice. ^2 Value when measuring the KEYENCE standard target (white diffuse object). ^3 F.S. of each model is as follows. IL-030: ±5 mm ±0.20" IL-065: ±10 mm ±0.39" IL-100: ±20 mm ±0.79" IL-300: ±140 mm ±5.51" IL-600: ±400 mm ±15.75" IL-2000: +1000 to -1500 mm 39.37" to -59.05" ^4 Value when measuring the KEYENCE standard target (white diffuse object) at the reference distance, sampling rate: 1 ms, and average number of times: 128. For the IL-300/IL-600, the sampling rate is 2 ms. For the IL-2000, the sampling rate is set to 5ms. ^5 F.S. of each model is as follows. IL-030: ±5 mm ±0.20" IL-065: ±10 mm ±0.39" IL-100: ±20 mm ±0.79" IL-300: ±140 mm ±5.51" IL-600: ±400 mm ±15.75" ^6 Value when the sampling rate is set to 2 ms or 5 ms.

Keyence OP-87443 Keyence

$112.76

Only 9 units left

Specifications

Model				OP-87443
Type				Monitor power cable
Cable end				M8 4-pin / Strand wire
Length				2 m 6.6'

Keyence LK-G3001 Keyence

$1,237.31

In stock, 41 units

Specifications

Model			LK-G3001^*1
Type			Separate monitor model^*2
Display	Head compatibility		All LK-G sensor heads are compatible
	Number of connectable sensors		Maximum of 2 units
	Minimum display unit		0.01 µm
	Display range		±9,999.99 mm to ±9,999.99 µm (Selectable from six levels)
	Refresh rate		10 times/sec
Terminal block	Analog voltage output		±10 V x 2 outputs, output impedance: 100 Ω
	Analog current output		4 to 20 mA x 2 outputs, maximum load resistance: 350 Ω
	Timing input		For OUT1, non-voltage input
	Reset input
	Auto-zero input
	Laser remote interlock input		Non-voltage input
	Comparator output		For OUT1, NPN open-collector output
	Alarm output		For OUT1, NPN open-collector output (N.C.)
Expansion connector	Timing input		For OUT2, non-voltage input
	Reset input
	Auto-zero input
	Program switching input		Non-voltage input x 3 inputs
	Laser-Off input		For Head A/Head B, non-voltage input
	Comparator output		For OUT2, NPN open-collector output
	Alarm output		For OUT2, NPN open-collector output (N.C.)
	Binary	Binary output	Measured data output (21 bits), OUT1/OUT2 selectable, NPN open-collector output
		Strobe output	NPN open-collector output
		Binary selector output
		Binary selector input	Non-voltage input
RS-232C interface			Measured data output and control input/output (Maximum baud rate: 115,200 bps, selectable)
USB interface			In conformity with USB Revision 2.0 Full speed (USB1.1 compatible)
Major functions			2 OUT simultaneous measurement, Operation, Averaging, Filter, Calibration, Measurement, AUTO ZERO, Sampling frequency setting, Mutual interference prevention, Data storage, 8-program memory, ECO mode, ABLE setting, Target setting, ABLE tuning, Selection of measurement surface of transparent target, Statistics processing, Connection of setting support software, Selectable head-mounting, etc.
Rating	Power voltage		24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption		500 mA or less with 1 head/600 mA or less with 2 heads
Environmental resistance	Ambient temperature		0 to +50 °C 32 to 122 °F
	Relative humidity		35 to 85 % RH (No condensation)
Weight			Approx. 370 g
^1 The rating of the NPN open-collector: 50 mA max. (40 V max.), residual voltage of 1 V max. The rating of non-voltage input: 1 V or less ON voltage, 0.6 mA or less OFF current. ^2 LK-G3001 can be operated singly. The measured value display and setting modifications can be performed on the display panel (LK-GD500) or via the setting support software (LK-H1W).

Keyence LK-HD500 Keyence

$439.32

Only 6 units left

Specifications

Model		LK-HD500
Type		Display unit
Supported models		LK-G5000 LK-G5000P
Display	Minimum display unit	0.001 µm
	Display range	±999.999 µm to ±9,999.99 mm (selectable from 7 levels)
	Display cycle	10 times/sec.

Keyence LK-H152 Keyence

$3,823.69

Only 8 units left

Specifications

Model		LK-H152
Mounting mode		Diffuse reflective / Specular reflective^*1
Reference distance		Diffuse reflective: 150 mm 5.91" Specular reflective: 147.5 mm 5.81"
Measuring range		Diffuse reflective: ±40 mm ±1.57" Specular reflective: -39.5 mm to +24.4 mm -1.56" to +0.96"^*2
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 2 FDA(CDRH)21CFR Part 1040.10: Class II
	Output	0.95mW
Spot diameter (at standard distance)		ø120 µm
Linearity		±0.02% of F.S. (F.S.= 80 mm 3.15")^*3
Repeatability		0.25 µm^*4
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S. (F.S.= 80 mm 3.15")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 5,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F^*5
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 300 g
^1 Use one of the following dark filters when measuring a transparent or mirror surface object: LK-H082/LK-H087: LK-F3, LK-H152/LK-H157: LK-F2 ^2 Measurement range when the sampling cycle is 20 µs or more. ^3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^4 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs. ^*5 When the ambient temperature rises to 40 °C 104 °F or more, mount this on a metal plate before use.

Keyence LK-H050 Keyence

$2,888.41

Only 7 units left

Specifications

Model		LK-H050
Mounting mode		Diffuse reflective
Reference distance		50 mm 1.97"
Measuring range		±10 mm ±0.39"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 3R FDA(CDRH)21CFR Part 1040.10: Class IIIa
	Output	4.8mW
Spot diameter (at standard distance)		ø50 µm
Linearity		±0.02% of F.S. (F.S.= 20 mm 0.79")^*2
Repeatability		0.025 µm^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S./°C (F.S.= 20 mm 0.79")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 260 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs. ^4 When the ambient temperature rises to 40 °C 104 °F or more, mount this on a metal plate before use.

Keyence CL-C5 Keyence

$750.00

Only 5 units left

Specifications

Model				CL-C5
Length				5 m 16.4'
Weight				450 g

Keyence CL-L015N Keyence

$0.00

Sold Out

Specifications

Model			CL-L015N
Type			Optical unit
Head			CL-L015 ^*1
Reference distance			15 mm 0.59"
Reference measurement range	Measurement range		±1.3 mm ±0.05"
	Linearity		±0.49 μm ±0.000019" ^*2
High precision measurement range	Measurement range		±0.5 mm ±0.02"
	Linearity		±0.41 μm ±0.000016" ^*2
Resolution			0.25 μm 0.000010" ^*3
Spot diameter			ø300 μm ø0.0118"
Laser class	Optical unit		Class I
Sampling cycle			100/200/500/1000 μs (Adjustable 4-stage)
Environmental resistance	Enclosure rating	Head	IP67 (IEC60529)
	Ambient light		Target surface illuminance: 30000 lux (Incandescent lamp)
	Ambient temperature		0 to 50°C 32 to 122°F
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance	Head	10 to 57 Hz, double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes
		Optical unit	10 to 57 Hz, double amplitude 0.3 mm 0.01"; 2 hours each for X, Y, and Z axes
	Shock resistance		15 G, 6 ms
Temperature characteristic	Head		0.005% of F.S./°C
	Optical unit		0.015% of F.S./°C
Material	Head		Front: SUS, Rear: Aluminum
	Optical unit		Polycarbonate
Weight	Head		Approx. 180 g 6.35 oz
	Optical unit		Approx. 1600 g 3.53 lb
^1 Sensor head and optical unit are a matched pair. Not cross compatible. ^2 Value measured in displacement mode with KEYENCE reference workpiece (mirrored surface). ^*3 Value measured using 16,384 average cycles with KEYENCE reference workpiece (mirrored surface).

Keyence CL-3000 Keyence

$1,992.26

Only 6 units left

Specifications

Model		CL-3000
Type		Controller
Number of optical unit connections		Controller only: 2 units; using expansion units / relay units: 6 units
Interface	EtherNet/IP™	Supports cyclic communication and message communication; RPI: 1 to 10,000 ms (0.5 ms units) Maximum number of connections: 8, complies with Version CT14 conformance test Cannot be used when using PROFINET, PLC link or EtherCAT
	PROFINET	Compatible with conformance class A. Cannot be used when using EtherNet/IP™, PLC link or EtherCAT
	PLC-Link	The following PLCs are supported: Mitsubishi Electric: MELSEC iQ-R Series, iQ-F Series, Q Series, L Series, FX Series Cannot be used when using EtherNet/IP™, PROFINET or EtherCAT
	Ethernet	Allows for measurement data output and control I/O via no-protocol command communication with PCs and PLCs 100Base-TX, capable of communication with CL-NavigatorN^*1
	USB	Conforms to USB 2.0 HighSpeed, capable of communication with CL-NavigatorN^*1
	RS-232C	Allows for measurement data output and control I/O via no-protocol command communication with PCs and PLCs Baud rate: 9600 to 115,200 bps, data length: 8 bit, stop bit: 1 bit, parity: none / even numbers / odd numbers
	Terminal (IN)	13 (supports function switching via software)
	Terminal (OUT)	11 ^*2(supports function switching via software)
Ratings	Power voltage	24 VDC ±10%
	Maximum current consumption	With 1 optical unit connected: 0.86 A, with 4 optical units connected: 3.3 A, with 6 optical units connected: 4.5 A
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F
	Relative humidity	20% RH to 85% RH (no condensation)
	Vibration resistance	10 to 57 Hz, double amplitude 0.3 mm 0.01"; 2 hours each for X, Y, and Z axes
Monitor／Setting support software		CL-NavigatorN
Weight		Approx. 600 g
CL-NavigatorN OS environment	Supported OS	Windows^Ⓡ 11 Pro / Windows^Ⓡ 10 ^3 / Windows^Ⓡ 7 ^4
	CPU	Celeron Dualcore 1.7 GHz or higher
	Memory capacity	4 GB or more
	Required free space on hard disk	1 GB or more
	Display resolution	XGA (1024 x 768 pixels) or higher
^1 Sample DLL and LabVIEW programs are available. Contact your local sales office for details. ^2 Positive common connection is supported for NPN input devices, and negative common connection for PNP input devices. ^3 Home, Pro and Enterprise Editions are supported. ^4 Home Premium, Professional and Ultimate Editions are supported. • Windows^Ⓡ and Excel are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Keyence LJ-H3 Keyence

$556.88

Only 4 units left

Specifications

Model				LJ-H3
Type				Setup/Monitor software
Operating System				Windows 11 Pro Windows 10 ^1 Windows 7 (SP1 or later)^2 Windows Vista (SP2 or later)^3 Windows XP (SP3 or later)^4
Supported languages				English, Japanese, German, French, Simplified Chinese, Traditional Chinese
CPU				Core i3 2.3 GHz or faster
Memory capacity				2GB or more
L2 cache memory				2MB or more
Available hard disk space				10 GB or more
Display				XGA (1024×768 pixel) or more, 256-colors or more
PC interface				Any one of the following must be loaded. USB2.0/1.1^5, Ethernet 1000BASE-T/100BASE-TX^6
Weight				Approx. 400 g
^1 Compatible with each edition of Home, Pro, and Enterprise. ^2 Compatible with Home Premium, Professional, and Ultimate editions. ^3 Compatible with Ultimate, Business, Home Premium, and Home Basic editions. ^4 Compatible with Home Premium and Professional editions. ^5 Connection through a USB hub or converter is not guaranteed. ^6 Connections with a LAN through a router or converter are not guaranteed.

Keyence LJ-V7060 Keyence

$1,228.44

In stock, 11 units

Specifications

Model			LJ-V7060
Mounting conditions			Diffuse reflection
Reference distance			60 mm 2.36"
Measurement range	Z-axis (height)		±8 mm 0.31" (F.S.=16 mm 0.63")
	X-axis (width)	NEAR side	13.5 mm 0.53"
		Reference distance	15 mm 0.59"
		Far side
Light source	Type		Blue semiconductor laser
	Wavelength		405 nm (visible beam)
	Laser class		Class 2M Laser Product^1 (IEC60825-1, FDA(CDRH) Part 1040.10^2)
	Output		10 mW
Spot size (reference distance)			Approx. 21 mm × 45 µm 0.83" × 0.001772"
Repeatability	Z-axis (height)		0.4 µm 0.000016"^3^4
	X-axis (width)		5 µm 0.000197"^3^5
Linearity	Z-axis (height)		±0.1% of F.S.^*6
Profile data interval	X-axis (width)		20 µm 0.0008"
Sampling cycle (trigger interval)			Top speed: 16 µs (high-speed mode), Top speed: 32 µs (advanced function mode)^*7
Temperature characteristics			0.01% of F.S./°C
Environmental resistance	Enclosure rating		IP67 (IEC60529)^*8
	Ambient light		Incandescent lamp: 10,000 lux max.^*9
	Ambient temperature		0 to +45 °C 32 to 113 °F^*10
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance		10 to 57 Hz, Double amplitude 1.5 mm 0.06", 3 hours in each of the X, Y, and Z directions
	Shock resistance		15 G/6 ms
Material			Aluminum
Weight			Approx. 450 g
^1 Do not look into the beam directly using any optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Viewing the laser output with an optical instrument may pose an eye hazard. ^2 The laser classification for FDA(CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 This value is from a case in which measurement has been performed with a reference distance with 4,096 times of averaging. ^4 The measurement targets are KEYENCE standard targets. This value is from a case in which the average height of the default setting area has been measured in height mode. All other settings are default. ^5 The measurement target is a pin gauge. This value is from a case in which the position of the intersection between the rounded surface of the pin gauge and the edge level has been measured in position mode. All other settings are default. ^6 The measurement targets are KEYENCE standard targets. The profile data is from a case in which measurement has been performed with 64 times of smoothing and 8 times of averaging. All other settings are default. ^7 For high-speed mode, when the measurement area is at its minimum, binning is ON, image capture mode is set to standard, and parallel image capture is ON. All other settings are default. For advanced function mode, when the measurement area is at its minimum, binning is ON and image capture mode is set to standard. All other settings are default. ^8 This value is from a case in which the sensor head cable (CB-B) or extension cable (CB-BE) has been connected. ^9 This is the illuminance for the light-receiving surface of the sensor head during white paper measurement when light has been shined onto the white paper. ^10 The sensor head must be mounted on a metal plate for use.

Keyence LJ-V7001 Keyence

$862.17

Only 9 units left

Specifications

Model		LJ-V7001
Number of connectable sensors		Max. 2 units
Display	Minimum displayable unit	0.1 µm, 0.00001 mm₂, 0.01°
	Maximum display range	±9999.99 mm 393.7", ±9999.99 mm²
Input terminal block	Laser remote interlock input	No-voltage input^*1
Input terminal block	Encoder input	NPN open collector output/PNP open collector output (5V / 12V / 24V) line driver output
Input terminal block	Trigger input	No-voltage input^*1
	Timing 1,2 input
	Auto-zero 1,2 input
Input terminal block	Reset 1, 2 input
Input terminal block	Start measurement/stop input
	Start storage/stop input
	Clear memory input
	Laser OFF input
	Program switch input	No-voltage input x 4 inputs^*1
Output terminal block	Analog voltage output	±10 V x 2 outputs, Output impedance: 100 Ω
Output terminal block	OUT comparator output	NPN open collector output x 12 outputs^*2 (Can freely assign 16 OUTs x 3 stage judgment results)
	Strobe output	NPN open collector output^*2
	Disable trigger output
	Memory FULL output
	Ready output
Output terminal block	Error output	NPN open collector output (N.C.)^*2
PC interface	Ethernet	1000BASE-T/100BASE-TX^*3
	USB	USB 2.0 high speed compliant (USB 1.1 Full-SPEED compatible)^*3
	RS232C	Measurement data output and control I/O (Can select a baud rate of up to 115,200 bits/s)
Rating	Power voltage	24 VDC ±10 %, including Ripple (P-P)
	Current consumption	1.3 A or less when connected to 1 head 1.9 A or less when connected to 2 heads
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	85% RH or less (no condensation)
Weight		Approx. 1,500 g
^1 The rating for non-voltage input is up to 1 V for ON voltage and up to 0.6 mA for OFF current ^2 The rating for NPN open-collector output is up to 50 mA (40 V or less), residual voltage of up to 1 V ^*3 DLL and LabVIEW programs are available. Contact your local sales office for details.

Keyence OP-84327 Keyence

$138.48

Only 8 units left

Specifications

Model				OP-84327
Type				Head mounting bracket
Applicable product				GT2-H32/GT2-H50
Note				Sold separately

Keyence OP-77679 Keyence

$130.04

Only 8 units left

Specifications

Model				OP-77679
Applicable product				GT Series/GT2 Series
Note				This is a flat-plate-type contact (sold separately). This contact can be used to perform detections using the peaks of the bumps of the target.

Keyence GT2-71MCN Keyence

$349.76

Only 8 units left

Specifications

Model		GT2-71MCN
Mounting method		DIN-rail mount
Output		NPN output
Main unit/expansion unit		Main unit
Power supply voltage		20 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,700 mW max. (30 V, 90 mA max.)
	Power saving (Eco)	2,200 mW max. (30 V, 73.3 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	NPN open collector, 40 V 50 mA or less, residual voltage 1 V or less^1^2
Analog output		4 to 20 mA, maximum load resistance: 350 Ω Analog output range can be changed as desired.
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (GT2-71MCN/71MCP: -10 to +45 °C 14 to 113 °F when expansion unit (s) is connected)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight		Approx. 70 g
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Page 1 / 30Next

Filters

In stock (381)
Out of stock (662)