Contact Displacement Sensors

$884.78

In stock, 16 units

Specifications

Model		GT2-P12K^*1
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.1 μm 0.004 Mil
Indicated accuracy		1 µm 0.04 Mil (p-p)^*2
Measuring force	Downward mounting	1.0 N^*3
	Side mounting	0.95 N^*3
	Upward mounting	0.9 N^*3
Sampling cycle		4 ms
Mechanical response		10 Hz^*2
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67G (JIS)^4, IP67 (IEC), NEMA Type 13^4
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT
	Dust boot	NBR
	Contact	SUS304, cemented tungsten carbide^*5
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 35 g (excluding cable)^*6
^1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased. For details, contact your local sales office. ^2 Value when the ambient temperature is 20 °C 68 °F. ^3 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^4 When an M8 oil-resistant cable (GT2-CHP2M/CHP5M/CHP10M) is used for the sensor head cable. ^5 The contact is included with the sensor. ^6 Including the relay connector.

Keyence GT2-H12 Keyence

$522.89

In stock, 15 units

Specifications

Model		GT2-H12
Detection system		Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range		12 mm 0.47"
Resolution		0.5 μm 0.02 Mil
Indicated accuracy		2 µm 0.08 Mil (p-p)^*1
Measuring force	Downward mounting	1.0 N^*2
	Side mounting	0.9 N^*2
	Upward mounting	0.8 N^*2
Sampling cycle		1 ms
Mechanical response		10 Hz^*1
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body cast: Zinc die-casting, Indicator: Polyarylate, Dust boot: NBR
	Dust boot	NBR
	Contact	TYPE304, 440C Stainless steel^*3
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 95 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^*3 The contact is included with the sensor.

Keyence GT2-H12K Keyence

$595.28

In stock, 19 units

Specifications

Model		GT2-H12K
Detection system		Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range		12 mm 0.47"
Resolution		0.1 μm 0.004 Mil
Indicated accuracy		1 µm 0.04 Mil (p-p)^*1
Measuring force	Downward mounting	1.0 N^*2
	Side mounting	0.9 N^*2
	Upward mounting	0.8 N^*2
Sampling cycle		1 ms
Mechanical response		10 Hz^*1
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body cast: Zinc die-casting, Indicator: Polyarylate, Dust boot: NBR
	Dust boot	NBR
	Contact	TYPE304 Stainless steel, super-tough tungsten alloy^*3
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 95 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^*3 The contact is included with the sensor.

Keyence GT2-A50 Keyence

$1,111.83

In stock, 14 units

Specifications

Model		GT2-A50
Detection system		Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range		50 mm 1.97"
Resolution		0.5 μm 0.02 Mil
Indicated accuracy		3.5 µm 0.14 Mil (p-p)^*1
Measuring force	Downward mounting	3.2 N^*2
	Side mounting	2.8 N^*2
	Upward mounting	2.4 N^*2
Sampling cycle		1 ms
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67^*3
	Pressure resistance	1 MPa
	Applied pressure range	0.25 to 0.5 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions^*4
Materials	Main body	Main body case: Zinc die-casting; Cylinder part: Aluminium alloy; Air joint resin part: Polyacetal; Air joint metal part: Brass nickel plating; Indicator: Polyarylate
	Dust boot	NBR
	Contact	TYPE304, 440C Stainless steel^*5
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 405 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^3 Make sure the air tube is connected to the air exhaust joint and that no foreign materials enter inside from the joint. ^4 In the case where a mounting bracket D is used with GT2-A32 and GT2-A50, the double amplitude becomes 0.75 mm 0.03". ^*5 The contact is included with the sensor.

Keyence GT2-71CP Keyence

$479.46

In stock, 11 units

Specifications

Model		GT2-71CP
Mounting method		DIN-rail mount
Output		PNP output
Main unit/expansion unit		Main unit
Power supply voltage		10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)	1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	PNP open collector, 30 V 50 mA or less, residual voltage 1 V or less^1^2
Analog output		-
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight		Approx. 70 g
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence GT2-S5 Keyence

$1,135.15

In stock, 16 units

Specifications

Model		GT2-S5^*1
Detection system		Differential transformer
Measuring range		5 mm 0.20"^*2
Operating range		7 mm 0.28"^*2
Resolution		0.1 µm
Indicated accuracy		1 µm (P-P)^3^4
Measuring force	Downward mounting	1.0 N^*5
	Side mounting	0.95 N^*5
	Upward mounting	0.9 N^*5
Sampling cycle		1 ms
Mechanical response		20 Hz^*4
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67G (JIS)^*6, IP67 (IEC)
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	10 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS430F, Sensor head-relay connector cable: PUR, Relay amplifier: PPSU
	Dust boot	NBR
	Contact	SUS304, cemented tungsten carbide^*7
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 40 g (not including cable)^*8
^1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased. For details, contact your local sales office. ^2 The measuring range represents the range at which measured values can be displayed. The operating range is the actual movable range of the spindle. ^3 Within ±0.3 mm 0.012" from the center of the measuring range, the width for any 0.2 mm 0.008" is 1 µm. The entire area is 2 µm. The linearity for the entire measuring range is ±0.15 % of F.S. (F.S.: 5 mm 0.20") ^4 Value when the ambient temperature is 20 °C 68 °F. ^5 Representative value at the center of the measuring range. Please note that the measuring force varies depending on the installation orientation of the dust boot. ^6 When an M8 oil-resistant cable (GT2-CHP2M/CHP5M/CHP10M) is used for the sensor head cable. ^7 Contacts are available as options sold separately. ^8 Including the relay connector.

Keyence GT2-71MCN Keyence

$349.76

Only 8 units left

Specifications

Model		GT2-71MCN
Mounting method		DIN-rail mount
Output		NPN output
Main unit/expansion unit		Main unit
Power supply voltage		20 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,700 mW max. (30 V, 90 mA max.)
	Power saving (Eco)	2,200 mW max. (30 V, 73.3 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	NPN open collector, 40 V 50 mA or less, residual voltage 1 V or less^1^2
Analog output		4 to 20 mA, maximum load resistance: 350 Ω Analog output range can be changed as desired.
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (GT2-71MCN/71MCP: -10 to +45 °C 14 to 113 °F when expansion unit (s) is connected)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight		Approx. 70 g
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence GT2-100P Keyence

$908.91

In stock, 14 units

Specifications

Model		GT2-100P
Mounting method		Panel mount/Screw mounting using optional mounting bracket
Output		PNP output
Main unit/expansion unit		-
Power supply voltage		20 to 30 VDC, including 10 % ripple (P-P), Class 2
Power consumption	Normal	4,500 mW max. (30 V, 150 mA max.)
	Power saving (Eco)	3,600 mW max. (30 V, 120 mA max.)^*1
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	PNP open collector, 30 V 50 mA or less^*2, residual voltage 1 V or less
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 0.15 mm 0.006", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET
Power supply/I/O cable		Power supply: Terminal block, I/O: 20-pin connector (MIL standard)
Weight		Approx. 380 g
^1 For GT2-100 Series, when the maximum number of sensor heads are connected and all units are set to power saving mode. ^2 When 2 or more sensor heads are connected, 20 mA or less.

Keyence GT2-P12L Keyence

$1,228.44

In stock, 13 units

Specifications

Model		GT2-P12L^*1
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.5 μm 0.02 Mil
Indicated accuracy		2 µm 0.08 Mil (p-p)^*2
Measuring force	Downward mounting	0.2 N^*3
	Side mounting	0.15 N^*3
	Upward mounting	0.1 N^*3
Sampling cycle		4 ms
Mechanical response		4 Hz^*2
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	-
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT
	Dust boot	-
	Contact	SUS304, SUS440C^*4
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 35 g (excluding cable)^*5
^1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased. For details, contact your local sales office. ^2 Value when the ambient temperature is 20 °C 68 °F. ^3 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^4 The contact is included with the sensor. ^*5 Including the relay connector.

Keyence GT2-H32L Keyence

$981.29

Only 9 units left

Specifications

Model		GT2-H32L
Detection system		Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range		32 mm 1.26"
Resolution		0.5 μm 0.02 Mil
Indicated accuracy		3 µm 0.12 Mil (p-p)^*1
Measuring force	Downward mounting	1.2 N^*2
	Side mounting	0.9 N^*2
	Upward mounting	0.6 N^*2
Sampling cycle		1 ms
Mechanical response		5 Hz^*1
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	-
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Materials	Main body	Main body cast: Zinc die-casting, Indicator: Polyarylate
	Dust boot	-
	Contact	TYPE304, 440C Stainless steel^*3
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 270 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^*3 The contact is included with the sensor.

Keyence GT2-CHL2M Keyence

$344.69

Only 2 units left

Specifications

Model				GT2-CHL2M
Type				Head cable
Applicable product				GT2 Series
Cable end				M8 L-shaped type - e-con
Length				2 m 6.56'
Note				The cable can be cut as desired. If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit). Only the 12 mm type of the L-shape types can be used.
Weight				Approx. 80 g

Keyence GT2-71N Keyence

$354.02

In stock, 12 units

Specifications

Model		GT2-71N
Mounting method		DIN-rail mount
Output		NPN output
Main unit/expansion unit		Main unit
Power supply voltage		10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)	1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	NPN open collector, 40 V 50 mA or less, residual voltage 1 V or less^1^2
Analog output		-
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (GT2-71MCN/71MCP: -10 to +45 °C 14 to 113 °F when expansion unit (s) is connected)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight		Approx. 140 g (including power cable)
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence GT2-75P Keyence

$426.39

In stock, 14 units

Specifications

Model		GT2-75P
Mounting method		Panel mount
Output		PNP output
Main unit/expansion unit		Main unit
Power supply voltage		10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)	1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	PNP open collector, 30 V 50 mA or less, residual voltage 1 V or less^1^2
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Power supply/I/O cable		12-core connector connection (Connecting cable included)
Weight		Approx. 140 g (including panel mounting bracket, protective front cover and power cable)
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence GT2-72CP Keyence

$402.26

In stock, 13 units

Specifications

Model		GT2-72CP
Mounting method		DIN-rail mount
Output		PNP output
Main unit/expansion unit		Expansion unit^*1
Power supply voltage		10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)	1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	PNP open collector, 30 V 50 mA or less, residual voltage 1 V or less^1^2
Analog output		-
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight		Approx. 70 g
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence GT2-71P Keyence

$390.20

In stock, 11 units

Specifications

Model		GT2-71P
Mounting method		DIN-rail mount
Output		PNP output
Main unit/expansion unit		Main unit
Power supply voltage		10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)	1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	PNP open collector, 30 V 50 mA or less, residual voltage 1 V or less^1^2
Analog output		-
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight		Approx. 140 g (including power cable)
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence GT-A10L Keyence

$912.34

Only 2 units left

Specifications

Model		GT-A10L
Type		Sensor head: Low-stress Air push models
Measuring range		10 mm 0.39"
Measuring force	Downward mounting	0.3 N^*1
	Side mounting	0.25N^*1
	Upward mounting	0.2 N^*1
Repeatability		3 µm 0.00012" (at ambient temperature of 23 °C 73 °F)^*2
Environmental resistance	Enclosure rating	-
	Pressure resistance	1.0 MPa
	Applied pressure range	0.35 to 0.5 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F
	Relative humidity	35 to 85 % RH
Material		Housing: TYPE430 stainless steel, Cylinder: Aluminum alloy, Plastic section of air joint: Polyacetal, Metal section of air joint: Nickel-plated brass, Indicator: Polyarylate, Contact: TYPE304 stainless steel, Cable: PVC
Weight		Approx. 150 g (With 2-m 6.6' cable)
^1 Value read near the center of the measuring range ^2 Value read at the center of the measuring range at ambient temperature of 23 °C 73 °F with the response time set to 100 ms.

Keyence GT2-H12L Keyence

$547.02

Only 7 units left

Specifications

Model		GT2-H12L
Detection system		Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range		12 mm 0.47"
Resolution		0.5 μm 0.02 Mil
Indicated accuracy		2 µm 0.08 Mil (p-p)^*1
Measuring force	Downward mounting	0.4 N^*2
	Side mounting	0.3 N^*2
	Upward mounting	0.2 N^*2
Sampling cycle		1 ms
Mechanical response		4 Hz^*1
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	-
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body cast: Zinc die-casting, Indicator: Polyarylate
	Dust boot	-
	Contact	TYPE304, 440C Stainless steel^*3
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 95 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^*3 The contact is included with the sensor.

Keyence GT2-A12KL Keyence

$495.53

In stock, 12 units

Specifications

Model		GT2-A12KL
Detection system		Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range		12 mm 0.47"
Resolution		0.1 μm 0.004 Mil
Indicated accuracy		1 µm 0.04 Mil (p-p)^*1
Measuring force	Downward mounting	0.4 N^*2
	Side mounting	0.3 N^*2
	Upward mounting	0.2 N^*2
Sampling cycle		1 ms
Fluid used		Dry air
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	-
	Pressure resistance	1 MPa
	Applied pressure range	0.25 to 0.5 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: Zinc die-casting; Cylinder part: Aluminium alloy; Air joint resin part: Polyacetal; Air joint metal part: Brass nickel plating; Indicator: Polyarylate
	Dust boot	-
	Contact	TYPE304 Stainless steel, super-tough tungsten alloy^*3
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 145 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^*3 The contact is included with the sensor.

Keyence GT2-CHP5M Keyence

$1,178.79

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GT2-76N Keyence

$471.23

Only 8 units left

Specifications

Model		GT2-76N
Mounting method		Panel mount
Output		NPN output
Main unit/expansion unit		Expansion unit^*1
Power supply voltage		10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)	1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	NPN open collector, 40 V 50 mA or less, residual voltage 1 V or less^1^2
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (GT2-71MCN/71MCP: -10 to +45 °C 14 to 113 °F when expansion unit (s) is connected)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Power supply/I/O cable		12-core connector connection (Connecting cable included)
Weight		Approx. 140 g (including panel mounting bracket, protective front cover and power cable)
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence GT-H10L Keyence

$534.96

In stock, 13 units

Specifications

Model		GT-H10L
Type		Sensor head: Low-stress
Measuring range		10 mm 0.39"
Measuring force	Downward mounting	0.3 N^*1
	Side mounting	0.25N^*1
	Upward mounting	0.2 N^*1
Mechanical response		7 Hz (at ambient temperature of 23 °C 73 °F)
Repeatability		3 µm 0.00012" (at ambient temperature of 23 °C 73 °F)^*2
Environmental resistance	Enclosure rating	-
	Ambient temperature	-10 to +55 °C 14 to 131 °F
	Relative humidity	35 to 85 % RH
Material		Housing: TYPE430 Stainless steel, Indicator: Polyarylate, Contact: TYPE304 stainless steel, Cable: PVC
Weight		Approx. 115 g (With 2-m 6.6' cable)
^1 Value read near the center of the measuring range ^2 Value read at the center of the measuring range with the response time set to 100 ms.

Keyence GT2-PA12 Keyence

$1,005.41

In stock, 17 units

Specifications

Model		GT2-PA12
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.5 µm 0.02 Mil
Indicated accuracy		2 µm 0.08 Mil (p-p)^*1
Measuring force	Downward mounting	1.2 N^*2
	Side mounting	1.15 N^*2
	Upward mounting	1.1 N^*2
Sampling cycle		4 ms
Fluid used		Clean dry air
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67 (IEC)
	Pressure resistance	0.5 MPa
	Applied pressure range	0.24 to 0.26 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT, Spindl: SUS430 (Fluorine coating)
	Contact	TYPE304, 440C Stainless steel^*3
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 35 g (excluding cable)^*4
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 This is a representative value at the center of the measuring range when using GT2 with a pressure of 0.25 MPa. The measuring force varies depending on the air pressure used. For details, please refer to the catalog or the user manual. ^3 The contact is included with the sensor. ^4 Including the relay connector.

Keyence GT2-76P Keyence

$471.23

In stock, 13 units

Specifications

Model		GT2-76P
Mounting method		Panel mount
Output		PNP output
Main unit/expansion unit		Expansion unit^*1
Power supply voltage		10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)	1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	PNP open collector, 30 V 50 mA or less, residual voltage 1 V or less^1^2
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Power supply/I/O cable		12-core connector connection (Connecting cable included)
Weight		Approx. 140 g (including panel mounting bracket, protective front cover and power cable)
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence GT2-PA12K Keyence

$1,053.66

In stock, 18 units

Specifications

Model		GT2-PA12K
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.1 µm 0.004 Mil
Indicated accuracy		1 µm 0.04 Mil (p-p)^*1
Measuring force	Downward mounting	1.2 N^*2
	Side mounting	1.15 N^*2
	Upward mounting	1.1 N^*2
Sampling cycle		4 ms
Fluid used		Clean dry air
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67 (IEC)
	Pressure resistance	0.5 MPa
	Applied pressure range	0.24 to 0.26 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT, Spindl: SUS430 (Fluorine coating)
	Contact	SUS304, cemented tungsten carbide^*3
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 35 g (excluding cable)^*4
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 This is a representative value at the center of the measuring range when using GT2 with a pressure of 0.25 MPa. The measuring force varies depending on the air pressure used. For details, please refer to the catalog or the user manual. ^3 The contact is included with the sensor. ^4 Including the relay connector.