Filters

Prosoft

144 products

Showing 1 - 24 of 144 products

Showing 1 - 24 of 144 products
View
1552-MBS Prosoft
Prosoft 1552-MBS Prosoft
$2,112.00
Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
1560-PDP2 Prosoft
Prosoft 1560-PDP2 Prosoft
$1,180.95
Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
3100-LTQ Prosoft
Prosoft 3100-LTQ Prosoft
$403.72
Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
3100-MCM PLC5 Prosoft
Prosoft 3100-MCM PLC5 Prosoft
$810.00
Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
3150-EMR Prosoft
Prosoft 3150-EMR Prosoft
$1,973.40
Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
3150-MCM Prosoft
Prosoft 3150-MCM Prosoft
$5,716.40
Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
3170-MBS Prosoft
Prosoft 3170-MBS Prosoft
$1,399.20
Only 1 unit left
The MVI94 Modbus Slave Network Interface Adapter can interface up to 8 Rockwell Automation FLEX and/or Integra I/O modules directly with any Modbus Master.
3170-PDP Prosoft
Prosoft 3170-PDP Prosoft
$1,886.28
Only 3 units left
The 3170-PDP PROFIBUS-DP Network Interface Adapter is a slave device that allows Rockwell Automation FLEX and/or Integra I/O modules to interface directly with a PROFIBUS-DP Master/Scanner.
3300-MBP Prosoft
Prosoft 3300-MBP Prosoft
$1,012.49
Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
4202-PRNT4-WEB Prosoft
Prosoft 4202-PRNT4-WEB Prosoft
$699.83
Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
5102-DFCM-ASCII3 Prosoft
Prosoft 5102-DFCM-ASCII3 Prosoft
$0.00
Sold Out
The ProLinx DF1 to ASCII Generic Serial Gateway creates a powerful connection between devices on a DF1 network and ASCII devices. This stand-alone DIN-rail mounted protocol gateway provides one DF1 configurable serial port and three ASCII configurable serial ports. The DF1 protocol driver supports master or Slave implementations of the protocol on each DF1 port. All DF1 ports are individually configurable. The ASCII protocol driver permits the module to interface to many ASCII devices. Each ASCII port on the module is configurable to send and/or receive ASCII strings, each supporting its own individual serial network.
5102-MCM-ASCII3 Prosoft
Prosoft 5102-MCM-ASCII3 Prosoft
$1,153.68
Only 1 unit left
The ProLinx Modbus Master/Slave to ASCII Generic Serial Gateway creates a powerful connection between devices on a Modbus network and ASCII devices. This stand-alone DIN-rail mounted protocol gateway provides one Modbus configurable serial port and three ASCII configurable serial ports. The Modbus protocol driver supports Master and Slave implementations of the protocol. All Modbus serial ports are individually configurable, providing a very powerful and flexible host or device interface solution. The ASCII protocol driver permits the module to interface to many ASCII devices. Each ASCII port on the module is configurable to send and/or receive ASCII strings, each supporting its own individual serial network.
5102-MCM4-DFCM4 Prosoft
Prosoft 5102-MCM4-DFCM4 Prosoft
$1,714.68
Only 3 units left
The ProLinx Modbus Master/Slave to DF1 Master/Slave Gateway creates a powerful connection between Modbus Master/Slave and DF1 Master/Slave networks and devices. This stand-alone DIN-rail mounted protocol gateway provides four serial ports, each individually configurable as a Modbus or DF1 Master or Slave. The Modbus protocol driver supports Master and Slave implementations of the protocol. All Modbus serial ports are individually configurable, providing a very powerful and flexible host or device interface solution. The DEM protocol driver is designed to provide a tightly integrated communications interface between other protocols of the ProLinx platform and the Honeywell DE instruments. Compatible DE devices include a large array of field devices including pressure, temperature, metering, and many other instruments.
5105-DFCM-PDPS Prosoft
Prosoft 5105-DFCM-PDPS Prosoft
$1,009.79
Only 2 units left
The ProLinx DF1 Master/Slave to PROFIBUS DP Slave Gateway creates a powerful connection between devices on a PROFIBUS DP network and DF1 devices. This stand-alone DIN-rail mounted protocol gateway provides one serial port and one PROFIBUS DP Slave. The DF1 protocol driver supports Master or Slave implementations of the protocol on each DF1 port. All DF1 ports are individually configurable. The PROFIBUS DP Slave protocol driver supports the PROFIBUS V0 Slave implementation, providing powerful data transfer capability between the ProLinx module and Siemens PLCs or other hosts. User configurable data mapping and DP port operation make the interface an easy to use and powerful data transfer tool.
5105-MCM-PDPS Prosoft
Prosoft 5105-MCM-PDPS Prosoft
$0.00
Sold Out
The ProLinx Modbus Master/Slave to PROFIBUS DP Slave Gateway creates a powerful connection between devices on a Modbus network and PROFIBUS DP master devices. This stand-alone DINrail mounted protocol gateway provides one configurable serial port and one DB9F PDPS port. The Modbus protocol driver supports Master and Slave implementations of the protocol. All Modbus serial ports are individually configurable, providing a very powerful and flexible host or device interface solution. The PROFIBUS DP Slave protocol driver supports the PROFIBUS V0 Slave implementation, providing powerful data transfer capability between the ProLinx module and Siemens PLCs or other hosts. User configurable data mapping and DP port operation make the interface an easy to use and powerful data transfer tool.
5201-DFNT-ASCII Prosoft
Prosoft 5201-DFNT-ASCII Prosoft
$2,184.60
Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
5201-DFNT-DH485 Prosoft
Prosoft 5201-DFNT-DH485 Prosoft
$377.99
Only 1 unit left
The ProLinx EtherNet/IP to DH-485 Gateway creates a powerful connection between devices on EtherNet/IP and DH-485 networks. This stand-alone DIN-rail mounted protocol gateway provides one Ethernet port and one DH-485 configurable serial port. The ProLinx DH485 protocol driver supports the Master and the Slave modes of the protocol, providing powerful data transfer capability with Rockwell Automation PLCs and HMIs. User configurable data mapping make the interface an easy to use and powerful data transfer tool. The EtherNet/IP protocol driver supports the Explicit Messaging implementation of the protocol. User-configurable as both a Client and a Server, the EtherNet/IP port is a very powerful data transfer tool.
5201-DFNT-DNPS Prosoft
Prosoft 5201-DFNT-DNPS Prosoft
$483.91
Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
5201-DFNT-DNPSNET Prosoft
Prosoft 5201-DFNT-DNPSNET Prosoft
$2,249.64
Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
5201-MNET-DFNT Prosoft
Prosoft 5201-MNET-DFNT Prosoft
$1,223.16
Only 1 unit left
The ProLinx Modbus TCP/IP Multi-Client to EtherNet/IP Gateway creates a powerful connection between Modbus TCP/IP and EtherNet/IP networks. The module provides one Ethernet port. The ProLinx Modbus TCP/IP (MNETC) Multi Client driver can be used to interface many different protocols into the Schneider Electric Quantum family of processors as well other software solutions supporting the protocol. The addition of the WEB hardware option provides the following additional features:
5201-MNET-MCM Prosoft
Prosoft 5201-MNET-MCM Prosoft
$360.13
Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
5202-104S-DFCM4 Prosoft
Prosoft 5202-104S-DFCM4 Prosoft
$0.00
Sold Out
The ProLinx family IEC60870-5-104 Server to DF1 Master/Slave communications module (5201-104S-DFCM) creates a powerful connection between devices on an IEC 104 network and DF1 devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides one Ethernet port and up to four serial ports. The 104S module accepts commands from an attached master unit on the network and generates unsolicited messages. The DF1 (DFCM) protocol driver supports Master or Slave implementations of the protocol on each DF1 port. All DF1 ports are individually configurable, providing a great deal of flexibility.
5204-MNET-PDPMV1 Prosoft
Prosoft 5204-MNET-PDPMV1 Prosoft
$0.00
Sold Out
The ProLinx Modbus TCP/IP to PROFIBUS DP Master Gateway creates a powerful connection between devices on a Modbus TCP/IP network and a PROFIBUS slave device. This stand-alone DIN-rail mounted protocol gateway provides one Ethernet port and PROFIBUS DP Master configurable DB-9F port. The Modbus TCP/IP protocol driver can interface many different protocols into Schneider Electric Quantum processors as well other solutions supporting the protocol. The MNET driver supports Client and Server connections, and when coupled with the Web option provides a web/ftp interface as well. The PROFIBUS DP Master protocol driver supports complete Master specifications according to IEC 61158 on either a Mono-Master or Multi-Master network. The module supports the DPV1 specification.
5205-DFNT-PDPS Prosoft
Prosoft 5205-DFNT-PDPS Prosoft
$810.00
Only 2 units left
The ProLinx EtherNet/IP to PROFIBUS DP Slave Gateway creates a powerful connection between devices on an EtherNet/IP network and a PROFIBUS master device. This stand-alone DIN-rail mounted protocol gateway provides one Ethernet port and one PROFIBUS DP Slave configurable DB9F port. The EtherNet/IP protocol driver supports the Explicit Messaging implementation of the protocol. User-configurable as both a Client and a Server, the EtherNet/IP port is a very powerful data transfer tool. The PROFIBUS DP Slave protocol driver supports the PROFIBUS V0 Slave implementation, providing powerful data transfer capability between the ProLinx module and Siemens PLCs or other hosts. User configurable data mapping and DP port operation make the interface an easy to use and powerful data transfer tool.

Recently viewed