Distance & Measurement Sensors

$571.14

In stock, 12 units

Specifications

Model		LR-TB5000C
Type		Cable with connector M12
Detectable distance		60 to 5000 mm 2.36" to 196.85"^*1
Spot diameter		Variable (use a spot diameter of 40 mm 1.57" or less)
Light source	Type	Red laser (660 nm)
	Laser class	Class 2 laser product (IEC60825-1,FDA (CDRH) Part1040.10^*2)
Mutual interference prevention function		4 units (when using the interference prevention function)
Timer		OFF/OFF delay/ON delay/One-shot
Response time		1 ms/10 ms/25 ms/100 ms/1000 ms selectable
I/O	Control output	NPN open collector/PNP open collector selectable 30 VDC or less, 50 mA or less, residual voltage: 2 V or less, N.O./N.C. selectable ^3^4
	Analog output	Current output/Voltage output selectable Current output: 4 to 20 mA with a max. load resistance of 500 Ω Voltage output: 0 to 10 V with an external load resistance of 5 kΩ or more ^3^4
Protection circuit		Protection against reverse power connection, power supply surges, output overcurrent, reverse output connection, and output surge
Power voltage		20 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
Current consumption		50 mA or less (without load)^*5
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient light	Incandescent lamp/Sunlight: 10,0000 lux or less
	Ambient temperature	-20 to +55 °C -4 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: Zinc die cast (Nickel chrome plating), Indicator cover and buttons: PES, Lens cover and display: PMMA (scratch-resistant coating specifications), Cable bushing: PBT, Cable: PVC, M12 connector: TPE, PBT, Nickel-plated brass
Accompanying items		Instruction manual, Laser warning and explanation labels
Weight		Approx. 160 g
^1 The range for displayable distance is from 50 to 5200. ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 You can select the I/O from the following combinations. Control output × 2, control output + external input Control output + analog output (LR-TB5000/TB5000C/TB5000CL only) External input + analog output (LR-TB5000/TB5000C/TB5000CL only) (For details on the setting method, see the instruction manual.) ^4 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. You can download a setup file from the KEYENCE website (http://www.keyence.com). If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office. ^*5 150 mA or less(with load)

Keyence LR-TB2000C Keyence

$426.39

In stock, 14 units

Specifications

Model		LR-TB2000C
Type		Cable with connector M12
Detectable distance		60 to 2000 mm 2.36" to 78.74"^*1
Spot diameter		Approx. ø4 mm ø0.16"
Light source	Type	Red laser (660 nm)
	Laser class	Class 2 laser product (IEC60825-1,FDA (CDRH) Part1040.10^*2)
Mutual interference prevention function		4 units (when using the interference prevention function)
Timer		OFF/OFF delay/ON delay/One-shot
Response time		1 ms/10 ms/25 ms/100 ms/1000 ms selectable
I/O	Control output	NPN open collector/PNP open collector selectable 30 VDC or less, 50 mA or less, residual voltage: 2 V or less, N.O./N.C. selectable ^3^4
	Analog output	-
Protection circuit		Protection against reverse power connection, power supply surges, output overcurrent, reverse output connection, and output surge
Power voltage		20 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
Current consumption		45 mA or less (without load)^*5
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient light	Incandescent lamp/Sunlight: 10,0000 lux or less
	Ambient temperature	-20 to +55 °C -4 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: Zinc die cast (Nickel chrome plating), Indicator cover and buttons: PES, Lens cover and display: PMMA (scratch-resistant coating specifications), Cable bushing: PBT, Cable: PVC, M12 connector: TPE, PBT, Nickel-plated brass
Accompanying items		Instruction manual, Laser warning and explanation labels
Weight		Approx. 85 g
^1 The range for displayable distance is from 50 to 2200. ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 You can select the I/O from the following combinations. Control output × 2, control output + external input Control output + analog output (LR-TB5000/TB5000C/TB5000CL only) External input + analog output (LR-TB5000/TB5000C/TB5000CL only) (For details on the setting method, see the instruction manual.) ^4 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. You can download a setup file from the KEYENCE website (http://www.keyence.com). If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office. ^*5 145 mA or less (with load)

Keyence LR-W500C Keyence

$545.49

In stock, 17 units

Specifications

Model		LR-W500C
Type		M12 connector 4-pin type
Detecting distance		30 to 500 mm 1.18" to 19.69"
Min. spot diameter		Adjustable spot Approx. ø3.5 mm at 100 mm ø0.14" at 3.94" Approx. ø9 mm at 250 mm ø0.35" at 9.84" Approx. ø18 mm at 500 mm ø0.71" at 19.69"
Light source		White LED
Mutual interference reduction function		Up to 2 units when alternate frequencies set
Timer		OFF/ON delay/OFF delay/One-shot
Response time		200 µs/1 ms/10 ms/100 ms/500 ms selectable ^*1
I/O	Control output	NPN open collector/PNP open collector selectable 30 VDC or less, 50 mA or less, remaining voltage: 2 V or less N.O./N.C. selectable ^*2
	External input	Tuning /Transmission OFF selectable Short circuit current: 1 mA or less for NPN/2 mA or less for PNP For the applied voltage, see the wiring diagrams in the instruction manual. For the input times, see the time charts in the instruction manual. ^*2
Protection circuit		Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection
Power supply	Power voltage	10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
	Current consumption	65 mA or less (without load) at 24 VDC; 120 mA or less (without load) at 12 VDC ^*3
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient light	Incandescent lamp: 10,000 lux or less, Sunlight: 20,000 lux or less
	Ambient temperature	-20 to +50 °C -4 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: Zinc die cast (Nickel chrome plating), Indicator cover: PPSU, Buttons: PES Lens cover and display: PMMA (scratch-resistant coating), Spot adjustment dial: Iron (triiron tetraoxide coated) Connector ring: PMP, Connector socket: PEI
Weight		Approx. 110 g
^1 When alternate frequencies are set, the response time increases by approximately 20%. ^2 IO-Link: Specification v.1.1/COM2 (38.4 kbps) is supported. The setup file can be downloaded from KEYENCE website (http://www.keyence.com). If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office. ^*3 195 mA or less (at 10 V, with load)

Keyence LR-ZB100CP Keyence

$341.96

Only 6 units left

Specifications

Model		LR-ZB100CP
Type		Distance based laser sensor
Appearance		Rectangular
Output		PNP
Cable connection		M8 connector, 4-pin
Detectable distance		35 to 100 mm 1.38" to 3.94" (650 to 0)^*1
Standard detectable deviation		35 to 50 mm 1.38" to 1.97": 1.5 mm 0.06" 50 to 100 mm 1.97" to 3.94": 3 mm 0.12"
Display resolution		2 (0.2 mm 0.008")
Spot size		Approx. 2 × 1 mm 0.08" × 0.04" at 100 mm 3.94"
Response time		1.5 ms / 10 ms / 50 ms selectable
Light source	Type	Red laser (660 nm)
	Laser class	Class 1 laser product (IEC60825-1, FDA (CDRH) Part1040.10^*2)
Function	Indicator	3-digit 7-segment display (red), output indicator (yellow), DATUM indicator (orange), 1 spot indicator (green)
	Timer	OFF/ON delay/OFF delay/One-shot
Specifications	Power voltage	10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
	Power consumption	450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)
	Control output	PNP Open collector, Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mA
	Protection circuit	Protection against reverse power connection, output overcurrent, output surge, reverse output connection
	Output operation	Light-ON / Dark-ON selectable
	External input	Input time calibration: 35 ms or more ON, 35 ms or more OFF Laser emission stop: 2 ms or more ON, 20 ms or more OFF Short-circuit current NPN: 1 mA or less/PNP: 2 mA or less
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB^3, Diversey^3
	Insulation resistance	20 MΩ or more (500 VDC)
	Ambient light	Incandescent lamp: 4,000 lux or less Sunlight: 8,000 lux or less^*4
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F (No freezing)
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKM
Accompanying items		Instruction Manual, Certification/Identification label (FDA)
Weight		Approx. 55 g
^1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed. ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 Have passed resistance tests with cleaning agents from multiple manufactures. ^4 When the response time is 10 ms

Keyence LR-ZH490CB Keyence

$933.03

In stock, 12 units

Specifications

Model		LR-ZH490CB^*1
Type		U.C.D. Function Distance based laser sensor
Appearance		M18 Threaded mount
Output		NPN/PNP selectable
Cable connection		M12 connector, 4-pin
Detectable distance		25 to 490 mm 0.98" to 19.29" (465 to 0)^*2
Standard detectable deviation		25 to 170 mm 0.98" to 6.69": 9 mm 0.35" 170 to 290 mm 6.69" to 11.42": 25 mm 0.98" 290 to 390 mm 11.42" to 15.35": 40 mm 1.57" 390 to 490 mm 15.35" to 19.29": 50 mm 1.97"
Display resolution		1 to 5 (1 to 5 mm 0.04" to 0.20")
Spot size		Approx. ø3 mm ø0.12"
Response time		1.5 ms / 10 ms / 50 ms selectable
Light source	Type	Red laser (660 nm)
	Laser class	Class 2 laser product (IEC60825-1) Class II Laser product (FDA(CDRH) Part1040.10)
Function	Indicator	3-digit 7-segment display (white), output indicator (yellow), DATUM indicator (orange), 1 spot indicator (green)
	Timer	OFF/ON delay/OFF delay/One-shot
Specifications	Power voltage	10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
	Power consumption	450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)
	Control output	NPN open collector/PNP Open collector selectable, Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mA
	Protection circuit	Protection against reverse power connection, output overcurrent, output surge, reverse output connection
	Output operation	Light-ON / Dark-ON selectable
	External input	Input time calibration: 35 ms or more ON, 35 ms or more OFF Laser emission stop: 2 ms or more ON, 20 ms or more OFF Short-circuit current NPN: 1 mA or less/PNP: 2 mA or less
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB^3, Diversey^3
	Insulation resistance	20 MΩ or more (500 VDC)
	Ambient light	Incandescent lamp: 10,000 lux or less Sunlight: 20,000 lux or less at 240 mm 9.45"^4 Incandescent lamp: 2,000 lux or less Sunlight: 4,000 lux or less at 490 mm 19.29"^4
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F (No freezing)
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKM, Nut: SUS316L, Lock washer: SUS304
Accompanying items		Instruction Manual, FDA warning/certification/identification label, Laser warning/explanation labels
Weight		Approx. 75 g
^1 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. (LR-ZH490CB : Only when PNP output is selected.) You can download a setup file from the KEYENCE website. If using the product in an environment in which downloading files over the internet is not possible, contact your nearest KEYENCE office. ^2 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed. ^3 Have passed resistance tests with cleaning agents from multiple manufactures. ^4 When the response time is 10 ms

Keyence LR-W70C Keyence

$474.65

Only 9 units left

Specifications

Model		LR-W70C
Type		Small/Dual Spot Type M12 connector 4-pin type
Detecting distance		30 to 70 mm 1.18" to 2.76"
Min. spot diameter		Approx. 1.6 x 2.9mm at 50 mm 0.06" × 0.11" at 1.97"
Light source		White LED
Mutual interference reduction function		Up to 2 units when alternate frequencies set
Timer		OFF/ON delay/OFF delay/One-shot
Response time		1-Spot Mode: 200 µs, 1 ms, 10 ms, 100 ms, 500 ms selectable 2-Spot Mode, Difference Monitoring: 500 µs, 2.5 ms, 20 ms, 200 ms, 999 ms selectable 2-Spot Mode, 2-Point Matching: 400 µs, 2 ms, 20 ms, 200 ms, 999 ms selectable^*1
I/O	Control output	NPN open collector/PNP open collector selectable 30 VDC or less, 50 mA or less, remaining voltage: 2 V or less N.O./N.C. selectable ^*2
	External input	Tuning /Transmission OFF selectable Short circuit current: 1 mA or less for NPN/2 mA or less for PNP For the applied voltage, see the wiring diagrams in the instruction manual. For the input times, see the time charts in the instruction manual. ^*2
Protection circuit		Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection
Power supply	Power voltage	10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
	Current consumption	60 mA or less (without load) at 24 VDC; 110 mA or less (without load) at 12 VDC)^*3
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient light	Incandescent lamp: 10,000 lux or less, Sunlight: 20,000 lux or less
	Ambient temperature	-20 to +50 °C -4 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: Zinc die cast (Nickel chrome plating), Indicator cover: PPSU, Buttons: PES, Lens cover and display: PMMA (scratch-resistant coating), Connector ring: PMP, Connector socket: PEI
Weight		Approx. 75 g
^1 When alternate frequencies are set, the response time increases by approximately 20%. ^2 IO-Link: Specification v.1.1/COM2 (38.4 kbps) is supported. The setup file can be downloaded from KEYENCE website (http://www.keyence.com). If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office. ^*3 180 mA or less (at 10 V, with load)

Keyence LK-G5001 Keyence

$1,872.36

Only 8 units left

Specifications

Model		LK-G5001
Type		Separate type Main controller
Sensor head compatibility		Compatible
No. of connectable sensor heads		2
Display	Minimum display unit	0.001 µm
	Display range	±999.999 µm to ±9999.99 mm (7 settings selectable)
	Display cycle	Approx 10 times/sec.
Display interface	Display port	Either the display unit (LK-HD500) or dedicated touch panel (LK-HD1001) can be connected
	LED indicator	LASER ON
Terminal block	Analog output voltage	±10 V output, Output impedance: 100 Ω^*1
	Analog current output	4 to 20 mA, Maximum load resistance: 350 Ω^*1
	No. of analog outputs	2^*1
	TIMING 1 input	Non-voltage input^*2
	RESET 1 input
	Auto-zero 1 input
	Laser remote input	Non-voltage input^*1
	Alarm output	NPN open-collector output^*1
	General comparator output
Expansion connector	TIMING input	Non-voltage input^*1
	RESET input
	Auto-zero input
	Program switching input
	Binary selection input
	Alarm output	NPN open-collector output^*1
	Comparator output
	Binary output
RS-232C interface		Baud rate: 9600 to 115200 bps Data length: 8 bits Stop bit length: 1 bit Parity: None/even/odd
USB interface		USB 2.0 Hi-Speed compliant^*3
Ethernet interface		100Base-TX/10Base-T^*4
EtherNet/IP™interface		Cyclic communication (implicit messaging) Message communication (explicit messaging) : UCMM and Class3 Number of connections: 32 Complies with conformance test version CT14^*5
PLC-Link		The following PLCs are supported:Mitsubishi Electric: MELSEC iQ-R Series, iQ-F Series, Q Series, L Series, FX Series EtherNet/IP™, CC-Link, and DeviceNet® cannot be used in conjunction with PLC-Link
Head expansion unit connector		Up to 10 head expansion units can be connected to one main controller
Expansion unit connector		Either of the CC-Link unit (LK-CC100) or DeviceNet® unit (LK-DN100) can be connected
Power supply	Power supply voltage	24 VDC ±10%
	Maximum current consumption	0.6 A or less with 1 head/3.5 A or less with 12 heads
Environmental resistance	Ambient temperature	When one or less head expansion unit is connected: 0 to +50 °C 32 to 122 °F. When two or more head expansion units are connected: 0 to +40 °C 32 to 104 °F.
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 600 g
^1 NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. PNP open-collector output rating: 50 mA max. (30 V max.), Residual voltage: 0.5 V max. Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max. Voltage input rating: Maximum input rating: 26.4 V, ON voltage: 10.2 V, OFF current: 0.6 mA Part of the input/output circuit of the LK-G5000 Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to "Precautions on wiring" in the User's Manual. ^2 NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. PNP open-collector output rating: 50 mA max. (30 V max.), Residual voltage: 0.5 V max. Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max. Voltage input rating: Maximum input rating: 26.4 V, ON voltage: 10.2 V, OFF current: 0.6 mA Part of the input/output circuit of the LK-G5000 Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to "Precautions on wiring" in the User's Manual. This input is applied to all of the synchronized OUT. ^3 When a PC supporting USB 1.1 or USB 2.0 full speed is connected, the data refresh cycle and other operations may slow down. ^4 Use the Ethernet interface only for direct connections with a PC or for local network connections with a PC or LK-G5000 Series units. ^*5 The EtherNet/IP™ interface cannot be used when a CC-Link unit or a DeviceNet® unit is installed. EtherNet/IP™ is supported by the latest controllers. For details on which controllers support EtherNet/IP™ , contact your nearest KEYENCE office.

Keyence LR-ZB250CP Keyence

$305.76

In stock, 11 units

Specifications

Model		LR-ZB250CP
Type		Distance based laser sensor
Appearance		Rectangular
Output		PNP
Cable connection		M8 connector, 4-pin
Detectable distance		35 to 250 mm 1.38" to 9.84" (215 to 0)^*1
Standard detectable deviation		35 to 180 mm 1.38" to 7.09": 9 mm 0.35" 180 to 250 mm 7.09" to 9.84": 25 mm 0.98"
Display resolution		1 to 3 (1 to 3 mm 0.04" to 0.12")
Spot size		Approx. 2.4 × 1.2 mm 0.09" × 0.05" at 250 mm 9.84"
Response time		1.5 ms / 10 ms / 50 ms selectable
Light source	Type	Red laser (660 nm)
	Laser class	Class 1 laser product (IEC60825-1, FDA (CDRH) Part1040.10^*2)
Function	Indicator	3-digit 7-segment display (red), output indicator (yellow), DATUM indicator (orange), 1 spot indicator (green)
	Timer	OFF/ON delay/OFF delay/One-shot
Specifications	Power voltage	10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
	Power consumption	450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)
	Control output	PNP Open collector, Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mA
	Protection circuit	Protection against reverse power connection, output overcurrent, output surge, reverse output connection
	Output operation	Light-ON / Dark-ON selectable
	External input	Input time calibration: 35 ms or more ON, 35 ms or more OFF Laser emission stop: 2 ms or more ON, 20 ms or more OFF Short-circuit current NPN: 1 mA or less/PNP: 2 mA or less
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB^3, Diversey^3
	Insulation resistance	20 MΩ or more (500 VDC)
	Ambient light	Incandescent lamp: 2,000 lux or less Sunlight: 4,000 lux or less^*4
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F (No freezing)
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKM
Accompanying items		Instruction Manual, Certification/Identification label (FDA)
Weight		Approx. 55 g
^1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed. ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 Have passed resistance tests with cleaning agents from multiple manufactures. ^4 When the response time is 10 ms

Keyence LK-G5001V Keyence

$2,253.37

Only 5 units left

Specifications

Model		LK-G5001V^1^2
Separate type		LK-G5001/LK-HD500
Type		Main controller
Sensor head compatibility		Compatible
No. of connectable sensor heads		2
Display	Minimum display unit	LK-HD500: 0.001 µm
	Display range	LK-HD500: ±999.999 µm to ±9,999.99 mm (7 settings selectable)
	Display cycle	LK-HD500: Approx. 10 times/sec.
Display interface	Display port	Either the display unit (LK-HD500) or dedicated touch panel (LK-HD1001) can be connected
	LED indicator	LASER ON
Terminal block	Analog output voltage	±10 V output, Output impedance: 100 Ω
	Analog current output	4 to 20 mA, Maximum load resistance: 350 Ω
	No. of analog outputs	2
	TIMING 1 input	Non-voltage input^*3
	RESET 1 input
	Auto-zero 1 input
	Laser control input	Non-voltage input^*4
	Laser remote input	Non-voltage input
	Alarm output	NPN open-collector output
	General comparator output
Expansion connector	TIMING input	Non-voltage input
	RESET input
	Auto-zero input
	Program switching input
	Binary selection input
	Alarm output	NPN open-collector output
	Comparator output
	Binary output
RS-232C interface		Baud rate: 9,600 to 115,200 bps Data length: 8 bits, Stop bit length: 1 bit, Parity: None/even/odd
USB interface		USB 2.0 Hi-Speed compliant^*5
Ethernet interface		100Base-TX/10Base-T^*6
EtherNet/IP™interface		Cyclic communication (implicit messaging) Message communication (explicit messaging) : UCMM and Class3 Number of connections: 32 Complies with conformance test version CT14^*7
PLC-Link		The following PLCs are supported:Mitsubishi Electric: MELSEC iQ-R Series, iQ-F Series, Q Series, L Series, FX Series EtherNet/IP™, CC-Link, and DeviceNet® cannot be used in conjunction with PLC-Link
Head expansion unit connector		Up to 10 head expansion units can be connected to one main controller
Expansion unit connector		Either of the CC-Link unit (LK-CC100) or DeviceNet® unit (LK-DN100) can be connected
Power supply	Power supply voltage	24 VDC ±10 %
	Maximum current consumption	0.6 A or less with 1 head/3.5 A or less with 12 heads
Environmental resistance	Ambient temperature	When one or less head expansion unit is connected: 0 to +50 °C 32 to 122 °F. When two or more head expansion units are connected: 0 to +40 °C 32 to 104 °F.
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 600 g
^1 NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max. ^2 Part of the input/output circuit of the LK-G5000 Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to "Precautions on wiring" in the User's Manual. ^3 This input is applied to all of the synchronized OUT. ^4 When the laser class 3B sensor head is connected, a key-operated switch must be used for the input to this terminal. The laser is emitted only when the key-operated switch is set to the ON position. (Select a key which can be removed only when it is set to the OFF position.) When the laser class 2/3R sensor head is connected, the laser turns on when this terminal is opened and turns off when it is short-circuited. ^5 When a PC supporting USB 1.1 or USB 2.0 full speed is connected, the data refresh cycle and other operations may slow down. ^6 Use the Ethernet interface only for direct connections with a PC or for local network connections with a PC or LK-G5000 Series units. ^*7 The EtherNet/IP™ interface cannot be used when a CC-Link unit or a DeviceNet® unit is installed. EtherNet/IP™ is supported by the latest controllers. For details on which controllers support EtherNet/IP™ , contact your nearest KEYENCE office.

Keyence LJ-V7000 Keyence

$3,023.71

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LJ-V7060 Keyence

$1,228.44

In stock, 11 units

Specifications

Model			LJ-V7060
Mounting conditions			Diffuse reflection
Reference distance			60 mm 2.36"
Measurement range	Z-axis (height)		±8 mm 0.31" (F.S.=16 mm 0.63")
	X-axis (width)	NEAR side	13.5 mm 0.53"
		Reference distance	15 mm 0.59"
		Far side
Light source	Type		Blue semiconductor laser
	Wavelength		405 nm (visible beam)
	Laser class		Class 2M Laser Product^1 (IEC60825-1, FDA(CDRH) Part 1040.10^2)
	Output		10 mW
Spot size (reference distance)			Approx. 21 mm × 45 µm 0.83" × 0.001772"
Repeatability	Z-axis (height)		0.4 µm 0.000016"^3^4
	X-axis (width)		5 µm 0.000197"^3^5
Linearity	Z-axis (height)		±0.1% of F.S.^*6
Profile data interval	X-axis (width)		20 µm 0.0008"
Sampling cycle (trigger interval)			Top speed: 16 µs (high-speed mode), Top speed: 32 µs (advanced function mode)^*7
Temperature characteristics			0.01% of F.S./°C
Environmental resistance	Enclosure rating		IP67 (IEC60529)^*8
	Ambient light		Incandescent lamp: 10,000 lux max.^*9
	Ambient temperature		0 to +45 °C 32 to 113 °F^*10
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance		10 to 57 Hz, Double amplitude 1.5 mm 0.06", 3 hours in each of the X, Y, and Z directions
	Shock resistance		15 G/6 ms
Material			Aluminum
Weight			Approx. 450 g
^1 Do not look into the beam directly using any optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Viewing the laser output with an optical instrument may pose an eye hazard. ^2 The laser classification for FDA(CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 This value is from a case in which measurement has been performed with a reference distance with 4,096 times of averaging. ^4 The measurement targets are KEYENCE standard targets. This value is from a case in which the average height of the default setting area has been measured in height mode. All other settings are default. ^5 The measurement target is a pin gauge. This value is from a case in which the position of the intersection between the rounded surface of the pin gauge and the edge level has been measured in position mode. All other settings are default. ^6 The measurement targets are KEYENCE standard targets. The profile data is from a case in which measurement has been performed with 64 times of smoothing and 8 times of averaging. All other settings are default. ^7 For high-speed mode, when the measurement area is at its minimum, binning is ON, image capture mode is set to standard, and parallel image capture is ON. All other settings are default. For advanced function mode, when the measurement area is at its minimum, binning is ON and image capture mode is set to standard. All other settings are default. ^8 This value is from a case in which the sensor head cable (CB-B) or extension cable (CB-BE) has been connected. ^9 This is the illuminance for the light-receiving surface of the sensor head during white paper measurement when light has been shined onto the white paper. ^10 The sensor head must be mounted on a metal plate for use.

Keyence LJ-V7001 Keyence

$818.63

Only 8 units left

Specifications

Model		LJ-V7001
Number of connectable sensors		Max. 2 units
Display	Minimum displayable unit	0.1 µm, 0.00001 mm₂, 0.01°
	Maximum display range	±9999.99 mm 393.7", ±9999.99 mm²
Input terminal block	Laser remote interlock input	No-voltage input^*1
Input terminal block	Encoder input	NPN open collector output/PNP open collector output (5V / 12V / 24V) line driver output
Input terminal block	Trigger input	No-voltage input^*1
	Timing 1,2 input
	Auto-zero 1,2 input
Input terminal block	Reset 1, 2 input
Input terminal block	Start measurement/stop input
	Start storage/stop input
	Clear memory input
	Laser OFF input
	Program switch input	No-voltage input x 4 inputs^*1
Output terminal block	Analog voltage output	±10 V x 2 outputs, Output impedance: 100 Ω
Output terminal block	OUT comparator output	NPN open collector output x 12 outputs^*2 (Can freely assign 16 OUTs x 3 stage judgment results)
	Strobe output	NPN open collector output^*2
	Disable trigger output
	Memory FULL output
	Ready output
Output terminal block	Error output	NPN open collector output (N.C.)^*2
PC interface	Ethernet	1000BASE-T/100BASE-TX^*3
	USB	USB 2.0 high speed compliant (USB 1.1 Full-SPEED compatible)^*3
	RS232C	Measurement data output and control I/O (Can select a baud rate of up to 115,200 bits/s)
Rating	Power voltage	24 VDC ±10 %, including Ripple (P-P)
	Current consumption	1.3 A or less when connected to 1 head 1.9 A or less when connected to 2 heads
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	85% RH or less (no condensation)
Weight		Approx. 1,500 g
^1 The rating for non-voltage input is up to 1 V for ON voltage and up to 0.6 mA for OFF current ^2 The rating for NPN open-collector output is up to 50 mA (40 V or less), residual voltage of up to 1 V ^*3 DLL and LabVIEW programs are available. Contact your local sales office for details.

Keyence LK-HD500 Keyence

$387.26

Only 5 units left

Specifications

Model		LK-HD500
Type		Display unit
Supported models		LK-G5000 LK-G5000P
Display	Minimum display unit	0.001 µm
	Display range	±999.999 µm to ±9,999.99 mm (selectable from 7 levels)
	Display cycle	10 times/sec.

Keyence LK-H152 Keyence

$3,823.69

Only 8 units left

Specifications

Model		LK-H152
Mounting mode		Diffuse reflective / Specular reflective^*1
Reference distance		Diffuse reflective: 150 mm 5.91" Specular reflective: 147.5 mm 5.81"
Measuring range		Diffuse reflective: ±40 mm ±1.57" Specular reflective: -39.5 mm to +24.4 mm -1.56" to +0.96"^*2
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 2 FDA(CDRH)21CFR Part 1040.10: Class II
	Output	0.95mW
Spot diameter (at standard distance)		ø120 µm
Linearity		±0.02% of F.S. (F.S.= 80 mm 3.15")^*3
Repeatability		0.25 µm^*4
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S. (F.S.= 80 mm 3.15")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 5,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F^*5
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 300 g
^1 Use one of the following dark filters when measuring a transparent or mirror surface object: LK-H082/LK-H087: LK-F3, LK-H152/LK-H157: LK-F2 ^2 Measurement range when the sampling cycle is 20 µs or more. ^3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^4 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs. ^*5 When the ambient temperature rises to 40 °C 104 °F or more, mount this on a metal plate before use.

Keyence LJ-H3 Keyence

$556.88

Only 3 units left

Specifications

Model				LJ-H3
Type				Setup/Monitor software
Operating System				Windows 11 Pro Windows 10 ^1 Windows 7 (SP1 or later)^2 Windows Vista (SP2 or later)^3 Windows XP (SP3 or later)^4
Supported languages				English, Japanese, German, French, Simplified Chinese, Traditional Chinese
CPU				Core i3 2.3 GHz or faster
Memory capacity				2GB or more
L2 cache memory				2MB or more
Available hard disk space				10 GB or more
Display				XGA (1024×768 pixel) or more, 256-colors or more
PC interface				Any one of the following must be loaded. USB2.0/1.1^5, Ethernet 1000BASE-T/100BASE-TX^6
Weight				Approx. 400 g
^1 Compatible with each edition of Home, Pro, and Enterprise. ^2 Compatible with Home Premium, Professional, and Ultimate editions. ^3 Compatible with Ultimate, Business, Home Premium, and Home Basic editions. ^4 Compatible with Home Premium and Professional editions. ^5 Connection through a USB hub or converter is not guaranteed. ^6 Connections with a LAN through a router or converter are not guaranteed.

Keyence LK-G3001 Keyence

$1,237.31

In stock, 41 units

Specifications

Model			LK-G3001^*1
Type			Separate monitor model^*2
Display	Head compatibility		All LK-G sensor heads are compatible
	Number of connectable sensors		Maximum of 2 units
	Minimum display unit		0.01 µm
	Display range		±9,999.99 mm to ±9,999.99 µm (Selectable from six levels)
	Refresh rate		10 times/sec
Terminal block	Analog voltage output		±10 V x 2 outputs, output impedance: 100 Ω
	Analog current output		4 to 20 mA x 2 outputs, maximum load resistance: 350 Ω
	Timing input		For OUT1, non-voltage input
	Reset input
	Auto-zero input
	Laser remote interlock input		Non-voltage input
	Comparator output		For OUT1, NPN open-collector output
	Alarm output		For OUT1, NPN open-collector output (N.C.)
Expansion connector	Timing input		For OUT2, non-voltage input
	Reset input
	Auto-zero input
	Program switching input		Non-voltage input x 3 inputs
	Laser-Off input		For Head A/Head B, non-voltage input
	Comparator output		For OUT2, NPN open-collector output
	Alarm output		For OUT2, NPN open-collector output (N.C.)
	Binary	Binary output	Measured data output (21 bits), OUT1/OUT2 selectable, NPN open-collector output
		Strobe output	NPN open-collector output
		Binary selector output
		Binary selector input	Non-voltage input
RS-232C interface			Measured data output and control input/output (Maximum baud rate: 115,200 bps, selectable)
USB interface			In conformity with USB Revision 2.0 Full speed (USB1.1 compatible)
Major functions			2 OUT simultaneous measurement, Operation, Averaging, Filter, Calibration, Measurement, AUTO ZERO, Sampling frequency setting, Mutual interference prevention, Data storage, 8-program memory, ECO mode, ABLE setting, Target setting, ABLE tuning, Selection of measurement surface of transparent target, Statistics processing, Connection of setting support software, Selectable head-mounting, etc.
Rating	Power voltage		24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption		500 mA or less with 1 head/600 mA or less with 2 heads
Environmental resistance	Ambient temperature		0 to +50 °C 32 to 122 °F
	Relative humidity		35 to 85 % RH (No condensation)
Weight			Approx. 370 g
^1 The rating of the NPN open-collector: 50 mA max. (40 V max.), residual voltage of 1 V max. The rating of non-voltage input: 1 V or less ON voltage, 0.6 mA or less OFF current. ^2 LK-G3001 can be operated singly. The measured value display and setting modifications can be performed on the display panel (LK-GD500) or via the setting support software (LK-H1W).

Keyence LR-TB5000 Keyence

$486.71

Only 10 units left

Specifications

Model		LR-TB5000
Type		Cable
Detectable distance		60 to 5000 mm 2.36" to 196.85"^*1
Spot diameter		Variable (use a spot diameter of 40 mm 1.57" or less)
Light source	Type	Red laser (660 nm)
	Laser class	Class 2 laser product (IEC60825-1,FDA (CDRH) Part1040.10^*2)
Mutual interference prevention function		4 units (when using the interference prevention function)
Timer		OFF/OFF delay/ON delay/One-shot
Response time		1 ms/10 ms/25 ms/100 ms/1000 ms selectable
I/O	Control output	NPN open collector/PNP open collector selectable 30 VDC or less, 50 mA or less, residual voltage: 2 V or less, N.O./N.C. selectable ^3^4
	Analog output	Current output/Voltage output selectable Current output: 4 to 20 mA with a max. load resistance of 500 Ω Voltage output: 0 to 10 V with an external load resistance of 5 kΩ or more ^3^4
Protection circuit		Protection against reverse power connection, power supply surges, output overcurrent, reverse output connection, and output surge
Power voltage		20 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
Current consumption		50 mA or less (without load)^*5
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient light	Incandescent lamp/Sunlight: 10,0000 lux or less
	Ambient temperature	-20 to +55 °C -4 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: Zinc die cast (Nickel chrome plating), Indicator cover and buttons: PES, Lens cover and display: PMMA (scratch-resistant coating specifications), Cable bushing: PBT, Cable: PVC
Accompanying items		Instruction manual, Laser warning and explanation labels
Weight		Approx. 200 g (Including cable)
^1 The range for displayable distance is from 50 to 5200. ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 You can select the I/O from the following combinations. Control output × 2, control output + external input Control output + analog output (LR-TB5000/TB5000C/TB5000CL only) External input + analog output (LR-TB5000/TB5000C/TB5000CL only) (For details on the setting method, see the instruction manual.) ^4 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. You can download a setup file from the KEYENCE website (http://www.keyence.com). If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office. ^*5 150 mA or less(with load)

Keyence LR-ZB100CN Keyence

$354.02

In stock, 12 units

Specifications

Model		LR-ZB100CN
Type		Distance based laser sensor
Appearance		Rectangular
Output		NPN
Cable connection		M8 connector, 4-pin
Detectable distance		35 to 100 mm 1.38" to 3.94" (650 to 0)^*1
Standard detectable deviation		35 to 50 mm 1.38" to 1.97": 1.5 mm 0.06" 50 to 100 mm 1.97" to 3.94": 3 mm 0.12"
Display resolution		2 (0.2 mm 0.008")
Spot size		Approx. 2 × 1 mm 0.08" × 0.04" at 100 mm 3.94"
Response time		1.5 ms / 10 ms / 50 ms selectable
Light source	Type	Red laser (660 nm)
	Laser class	Class 1 laser product (IEC60825-1, FDA (CDRH) Part1040.10^*2)
Function	Indicator	3-digit 7-segment display (red), output indicator (yellow), DATUM indicator (orange), 1 spot indicator (green)
	Timer	OFF/ON delay/OFF delay/One-shot
Specifications	Power voltage	10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
	Power consumption	450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)
	Control output	NPN Open collector, Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mA
	Protection circuit	Protection against reverse power connection, output overcurrent, output surge, reverse output connection
	Output operation	Light-ON / Dark-ON selectable
	External input	Input time calibration: 35 ms or more ON, 35 ms or more OFF Laser emission stop: 2 ms or more ON, 20 ms or more OFF Short-circuit current NPN: 1 mA or less/PNP: 2 mA or less
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB^3, Diversey^3
	Insulation resistance	20 MΩ or more (500 VDC)
	Ambient light	Incandescent lamp: 4,000 lux or less Sunlight: 8,000 lux or less^*4
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F (No freezing)
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKM
Accompanying items		Instruction Manual, Certification/Identification label (FDA)
Weight		Approx. 55 g
^1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed. ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 Have passed resistance tests with cleaning agents from multiple manufactures. ^4 When the response time is 10 ms

Keyence LK-H050 Keyence

$2,888.41

Only 8 units left

Specifications

Model		LK-H050
Mounting mode		Diffuse reflective
Reference distance		50 mm 1.97"
Measuring range		±10 mm ±0.39"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 3R FDA(CDRH)21CFR Part 1040.10: Class IIIa
	Output	4.8mW
Spot diameter (at standard distance)		ø50 µm
Linearity		±0.02% of F.S. (F.S.= 20 mm 0.79")^*2
Repeatability		0.025 µm^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S./°C (F.S.= 20 mm 0.79")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 260 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs. ^4 When the ambient temperature rises to 40 °C 104 °F or more, mount this on a metal plate before use.

Sick OD1-B100H50I25 DISPLAC. SENS, OPTICAL Sick

$3,224.55

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Sick OD1-B035H15U14 DISPLAC. SENS, OPTICAL Sick

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LR-ZH500P Keyence

$426.39

Only 9 units left

Specifications

Model		LR-ZH500P^*1
Type		U.C.D. Function Distance based laser sensor
Appearance		Rectangular
Output		PNP
Cable connection		2 m cable
Detectable distance		35 to 500 mm 1.38" to 19.69"(465 to 0)^*2
Standard detectable deviation		35 to 180 mm 1.38" to 7.09": 9 mm 0.35" 180 to 300 mm 7.09" to 11.81": 25 mm 0.98" 300 to 400 mm 11.81" to 15.75": 40 mm 1.57" 400 to 500 mm 15.75" to 19.69": 50 mm 1.97"
Display resolution		1 to 5 (1 to 5 mm 0.04" to 0.20")
Spot size		Approx. ø3 mm ø0.12"
Response time		1.5 ms / 10 ms / 50 ms selectable
Light source	Type	Red laser (660 nm)
	Laser class	Class 2 laser product (IEC60825-1) Class II Laser product (FDA(CDRH) Part1040.10)
Function	Indicator	3-digit 7-segment display (white), output indicator (yellow), DATUM indicator (orange), 1 spot indicator (green)
	Timer	OFF/ON delay/OFF delay/One-shot
Specifications	Power voltage	10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
	Power consumption	450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)
	Control output	PNP Open collector, Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mA
	Protection circuit	Protection against reverse power connection, output overcurrent, output surge, reverse output connection
	Output operation	Light-ON / Dark-ON selectable
	External input	Input time calibration: 35 ms or more ON, 35 ms or more OFF Laser emission stop: 2 ms or more ON, 20 ms or more OFF Short-circuit current NPN: 1 mA or less/PNP: 2 mA or less
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB^3, Diversey^3
	Insulation resistance	20 MΩ or more (500 VDC)
	Ambient light	Incandescent lamp: 10,000 lux or less Sunlight: 20,000 lux or less at 250 mm 9.84"^4 Incandescent lamp: 2,000 lux or less Sunlight: 4,000 lux or less at 500 mm 19.69"^4
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F (No freezing)
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKM
Accompanying items		Instruction Manual, FDA warning/certification/identification label, Laser warning/explanation labels
Weight		Approx. 110 g (Including cable)
^1 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. You can download a setup file from the KEYENCE website. If using the product in an environment in which downloading files over the internet is not possible, contact your nearest KEYENCE office. ^2 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed. ^3 Have passed resistance tests with cleaning agents from multiple manufactures. ^4 When the response time is 10 ms

Keyence LR-XN11P Keyence

$341.96

Only 7 units left

Specifications

Model		LR-XN11P
Type		PNP Output
Cable/Connector		Cable
Main Unit/Expansion Unit		Main Unit
No. of Control Outputs		2
No. of External Inputs		1
Response Time		500 µs^*1/1 ms/3 ms/10 ms/200 ms Selectable
IO-Link		—
Functions	Timer Function	Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot
I/O	Control Output	Open collector, 30 VDC or lower, N.O./N.C. When used as a solitary unit: 100 mA or lower for 1 output; 100 mA or lower in total for 2 outputs; When expanding with multiple units: 50 mA or lower for 1 output Residual voltage PNP: 1.6 V or lower (output current: 10 mA or lower)/2.2 V or lower (output current: 10 to 100 mA)
	External Input	External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable Short circuit current - PNP: 2 mA or lower Input time: 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF only when External Set is selected)
Unit Expansion		Up to 8 expansion units possible (including main unit, a total of 9 units connected) However, up to 16-unit expansion is possible when the LR-XN10 is used for expansion with the NU Series.
Protection Circuit		Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection
Number of Interference Prevention Devices		OFF/4 units/8 units selectable^*2
Power supply	Power voltage	16 to 30 VDC^*3 (including 10% ripple (P-P) or less), class 2
	Power consumption	During normal operation: 1150 mW (47 mA or lower at 24 V, 64 mA or lower at 16 V), ECO ON/ALL: 985 mW (40 mA or lower at 24 V, 53 mA or lower at 16 V) (excluding Load Current)
Environmental resistance	Ambient temperature	−20 to +55°C -4°F to 131°F (no freezing)^*4
	Relative humidity	35 to 85% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power Spectral Density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² (50G); 3 times each for X, Y, and Z axes
Case Material		Main Unit and Cover: Polycarbonate
Accessories		Instruction manual
Weight		Approx. 80 g
^1 If 500 µs is selected, the following limitations apply. · Only 2-point calibration can be performed. · The detection range masking is set during calibration. (Manual setting of the masking range is not supported.) · Output 2 is limited to an alarm output for errors and gyro issues, and standard/area cannot be used. · The interference prevention function is not supported ^2 Selecting four or eight interference prevention units causes the response time to change as follows: 4 Units selected: 6 ms/18 ms/60 ms/1.2 s selectable; 8 Units selected: 12 ms/36 ms/120 ms/2.4 s selectable. ^3 When expanding the system with 4 or more expansion units, use a power voltage of 20 V or higher. ^4 Expansion by 1 or 2 units: −20 to +55°C -4°F to 131°F; Expansion by 3 to 10 units: -20 to +50°C -4°F to 122°F, Expansion by 11 to 16 units: -20 to +45°C -4°F to 113°F

Sick OD1-B035H15I14 DISPLAC. SENS, OPTICAL Sick

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.