Machine Vision Systems

$2,957.35

Only 2 units left

Specifications

Model		SJ-H156A
Type		HA
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method/applied voltage		Pulse AC method, ±7000 V
Ion balance control method		Dual I.C.C. method
Ion balance		±30 V ^*1
Operating distance		50 to 2000 mm 1.97" to 78.74"
Control input		NPN open collector or contact point signal without voltage
Control output		NPN photo relay, Maximum 100 mA max. (40 V or less)
Major functions		Condition alarm, ion level alarm, alarm output
Air purge connection port		Rc 1/8
Air purge supplied pressure		0.5 MPa or less ^*2
Effective length		1560 mm 61.42" ^*3
No. ofelectrodes		24
Static elimination bar length		1520 mm 59.84"
Rating	Power voltage	24 VDC to 36 VDC ±10%
	Current consumption	500 mA (at 24 V), 350 mA (at 36 V)
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	35 to 85% RH (no condensation)
Material	Electrode probe	Tungsten
	Main unit	ABS/PC
Weight	Static elimination bar	1550 g 54.67 oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81" (22 Hz), 600 mm 23.62" (10 Hz), 1500 mm 59.06" (1 Hz) Operating ambient temperature: 0 to +40°C 32 to 104°F Operating ambient humidity: 35 to 65% RH 0.3 m/s 1.3'/s downflow ^2 Contact KEYENCE when using the air purge function with intermittent air supply. ^3 Effective length is for static elimination range when installation distance is 50 mm 1.97".

Keyence DX-RM1GA Keyence

$0.00

Sold Out

Specifications

Model		DX-RM1GA
Display	Charging Confirmation LED	2-color LED
Operations	Hard Keys	Front keys × 27
RFID	Supported Tags	ISO/IEC 18000-6 Type C (EPC Global Class 1 Gen 2)
	Frequency Range	902.75 - 927.25 MHz
	Transmission Output	500 mW or less
Power Source	Type	Dedicated lithium ion battery pack (DX-BC6)
	Capacity	6270 mAh
Interfaces	Magnet Connector	Supported (charging/communication) * Connected to DX-UC4 (with the DX-KE1), DX-UC4E, DX-UC1UL, DX-UC1M, or OP-88604 (magnetic charging cable)
Dimensions		222.4 × 70.6 × 50 mm 8.76" × 2.78" × 1.97"
Weight		Approx. 205 g 7.24 oz

Keyence KV-CA1H Keyence

$592.50

Only 5 units left

Specifications

Model		KV-CA1H
General specifications	Vibration resistance	10 to 500 Hz; Power spectral density: 0.033 G²/Hz; X, Y, and Z directions
	Operating ambient temperature	0 to +50°C 32 to 122°F (No freezing)
	Operating ambient humidity	35 to 85% RH (No condensation)
	Storage ambient temperature	−20 to +60°C -4 to +140°F (No freezing)
	Storage relative humidity	35 to 85% RH (No condensation)
	Enclosure rating	IP65F^1^2
	Pollution degree	3
Performance specifications	Installation distance	200 mm 7.87" to ∞
	Focal distance	3.8 mm 0.15" (fixed)
	Field of view	Horizontal field of view: Approx. 60° Vertical field of view: Approx. 47°
	Image-receiving element	1/2.9-inch color CMOS
	Resolution	640 (H) × 480 (V)
	Frame rate	10/30/120 fps
	Internal current consumption	70 mA or less ^*3
	Weight	Approx. 90 g 3.18 oz
^1 The enclosure rating is evaluated with the camera cable connected. ^2 “F” signifies evaluation as oilproof per JIS C 0920. ^*3 Maximum current consumption inside the camera when the power supplied to the CPU unit is 24 VDC (−15%/+20%). The maximum current consumption inside the camera is 120 mA when the unit power supplied to the camera is 12 to 24 VDC (−10%/+20%).

Keyence IV-H1 Keyence

$977.63

Only 4 units left

Specifications

Model				IV-H1
Type				Software for the IV-H Series
Operating System				Windows 10 Home/Pro/Enterprise^1 Windows 7 Home Premium/Professional/Ultimate^1 Windows XP Professional/Home Edition; either of OS above needs to be pre-installed
Supported languages				Japanese/English/German/Simplified Chinese/Traditional Chinese/ Italian/French/Spanish/Portuguese/Korean
CPU				Windows 10/7: needs to be compliant with system requirements for OS Windows XP: Pentium III or better, Clock speed 1 GHz or faster
Memory capacity				Windows 10/7: needs to be compliant with system requirements for OS Windows XP: 512 MB or more (1 GB or more is recommended)
Available hard disk space				1 GB or more
Display				Resolution 1,024 x 768 pixels or higher, Display Color High Color (16 bit) or higher
PC interface				Equip the Ethernet (100BASE-TX) interface
Note				.NET Framework 4.0 or 4.5 needs to be installed^*2
^1 Supported for 32 bit and 64 bit version. ^2 If .NET Framework 4.0 or 4.5 is not installed, this will be automatically installed at the time of IV-H1 installation.

Keyence OP-87637 Keyence

$0.00

Sold Out

Specifications

Model				OP-87637
Number included				1
Cable end				Sensor side: M12 4-pin straight, Cable end: Loose wires
Length				10 m 32.81'
Material				PUR zinc nickel plating
Weight				Approx. 310 g

Keyence LV-H64 Keyence

$349.76

Only 5 units left

Specifications

Model		LV-H64
Type		Long distance
FDA (CDRH) Part 1040.10		Class II
Light source		Visible red semiconductor laser
Wavelength		660 nm
Detecting distance	FINE	100 to 500 mm 3.94" to 19.69" (100 to 700 mm 3.94" to 27.56")^*1
	TURBO	200 to 850 mm (300 to 1000 mm) 7.87" to 33.46" (11.81" to 39.37")^*1
	SUPER	400 to 1200 mm (600 to 1500 mm) 15.75" to 47.24" (23.62" to 59.06")^*1
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
Material	Case	Reinforced glass/plastic
	Lens cover	Norbornene plastic
	Reflective mirror	Polycarbonate, acrylic
Weight		Approx. 45 g
^*1 The parentheses indicate the detecting distance when OP-51428 is used.

Keyence GL-SA40F Keyence

$0.00

Sold Out

Specifications

Model				GL-SA40F
Type				Protection cover Flat type for 40 beam axes
Overview				This protective case protects the main unit from impacts.
Applicable product				GL-S40FH
Number included				1
Length				822.6 mm 32.39"
Material				aluminum
Note				2 each of the following are included: hexagon socket head cap screw (width across flats: 3 mm), washer, and special hexagon socket head cap screw (M4, length: 13 mm, width across flats: 3 mm).
Weight				260 g

Keyence CV-X172AP Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-MZ10ATK Keyence

$530.48

Only 1 unit left

Specifications

Model		FD-MZ10ATK^*1
Type		Vertical
Shape		Built-in amplifier
Rated flow range		0.14 - 2.60 G/min (0.50 - 10 L/min)^*1
Possible display range		0.14 - 6.35 G/min (0.50 - 30 L/min)^*2
Possible ranges to set		0 - 6.35 G/min (0 - 30 L/min)
Connection port		NPT3/8 (10 A)
Detectable fluids		Water or non-corrosive liquid
Conductivity of detection fluids		5 µS/cm or higher
Detection fluid temperature		0 to +85°C 32 to 185 °F (No freezing)
Pressure loss		Max. 1.45 PSI (0.01 MPa)
Display method		Dual row display with 4-digit, 7 segment LED, bar display (2 colors), output indicators, flow indicator
Display resolution		0.01/0.1 (G/min, L/min) selectable
Repeatability		0.5 s : ±5% of F.S., 1 s : ±3.5% of F.S., 2.5 s : ±2.5% of F.S., 5 s : ±1.6% of F.S., 10 s : ±1% of F.S., 30 s : ±0.8% of F.S., 60 s : ±0.6% of F.S.^*3
Hysteresis		Variable
Response time (chatter prevention feature)		0.5 s/1 s/2.5 s/5 s/10 s/30 s/60 s variable
Accumulated flow unit		0.01/0.1/1/10/100 (G, L) selectable
Integration data storage cycle		Save to memory every 10 seconds
Memory backup		EEPROM (Data storage length : 10 years or longer, Data read/write frequency : 1 million times or more)
Analog output		4-20 mA, max. load resistance 260 Ω Analog output range can be set to any value
Integration reset/bank switch input/flow zero function input		Input time : 20 ms or greater,Select either the accumulation output or the accumulation pulse by setting the mode
Power consumption (Current consumption)		Normal : 1700 mW (70 mA), Power save : 1000 mW (40 mA)
Rating	Power voltage	24 VDC, Ripple (P-P) 10 % or less, Class 2
Environmental resistance	Enclosure rating	IP65
	Pressure resistance	290 PSI (2.0 MPa)
	Applied pressure range	Max. 145 PSI (1.0 MPa)
	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material	Liquid end materials	Bore : SCS13, Measurement pipe : PPS, O ring : fluoro-rubber (FKM)
	Other materials	Plastic case areas : PPS, Metal case areas : SUS430, Cable : PVC
Accessory		Instruction Manual, Connector cable (2.7 m 106.3")
Weight		Approx. 865 g
^1 The rated flow range indicates recommended operating range. ^2 Can be used within the display range as well as within the rated flow range. ^*3 The repeatability for FD-MZ10ATK (P)/YK (P) in the range of 5.20 to 7.50 G/min (20 to 30 L/min) is the double of the value listed in the table. The repeatability is the error of the detection point when fluids flow repeatedly under the same conditions.

Keyence FD-MH500A Keyence

$3,798.50

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87409 Keyence

$0.00

Sold Out

Specifications

Model				OP-87409
Type				Rear Fittings
Applicable product				LR-Z Series
Material				SUS316L
Weight				Approx. 30 g

Keyence SJ-E252A Keyence

$0.00

Sold Out

Specifications

Model		SJ-E252A
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method / Applied voltage		Pulse AC method/±8000 V
Ion balance control method		Hi-Power I.C.C. method
Ion balance		±30 V^*1
Installation distance		50 to 2000 mm 1.97" to 78.74"
Control input	Static elimination stop input	NPN open collector or contact point signal without voltage
Control output	Ion level warning, condition warning, alarm output	NPN open collector, Maximum 100 mA (40 VDC or less)
	Condition alarm output
	Alarm output
Major functions		Condition alarm, ion level alarm, alarm output
Air connection port		Rc 1/8
Air supply pressure		0.1 MPa to 0.5 MPa^*2 (recommended air pressure of 0.2 MPa)
Effective length		2580 mm 101.57"^*3
Total length		2480 mm 97.64"
No. ofelectrodes		41
Rating	Power voltage	24 VDC to 36 VDC ±10%
	Current consumption	700 mA (at 24 V), 500 mA (at 36 V)
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	35 to 85% RH (no condensation)
Material	Electrode probe	Tungsten
	Main body	ABS/PBT/PP/LCP/PPS/SPS/SUS
Weight		2500 g 88.19oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81" or more, Air supply pressure: 0.2 Mpa, Frequency: The highest device driving frequency, Operating ambient temperature: 0 to +40°C 32 to 104°F, Operating ambient humidity: 35 to 65% RH ^2 Contact KEYENCE when using the air purge function with intermittent air supply. ^*3 Effective length is for static elimination range when installation distance is 50 mm 1.97".

Keyence OP-88090 Keyence

$0.00

Sold Out

Specifications

Model				OP-88090
Type				Ethernet extension cable (M12)
Length				5 m 16.40'
Weight				Approx. 340 g

Keyence ER-GS12P03C Keyence

$0.00

Sold Out

Specifications

Model		ER-GS12P03C
Type		General-purpose all-metal shielded type Screw type M12 Connector with pigtail (M12 4-pin) PNP output Short-Range
Power supply cable length		0.3 m 1.0' ^*1
No. of control outputs		2
Output mode	Output 1	N.O.
	Output 2	N.C.
Button		None
Button	Function	―
Detecting distance		2 mm 0.08" ±10% ^*2
Response frequency		150 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		12 × 12 mm 0.47" × 0.47"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, Mounting screw: SUS303, Case resin: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 50 g 1.77 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence OP-88400 Keyence

$675.00

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence XC-H20D-05 Keyence

$0.00

Sold Out

Specifications

Model				XC-H20D-05
Cable length				5 m 16.4'
Cable shape				MIL - loose wires

Keyence CA-DDB15 Keyence

$0.00

Sold Out

Specifications

Model				CA-DDB15
Type				Dome Light
LED color				Blue
Power consumption				18.8 W
Input voltage				12 VDC
Weight				Approx. 170 g

Keyence OP76874 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89245 Keyence

$0.00

Sold Out

Specifications

Model				OP-89245
Type				This is a 2.5S ferrule mounting bracket with a leakage port on the side.
Material				Ferrule mounting bracket: SUS316L Gasket: EPDM

Keyence XG-8000 Keyence

$1,601.87

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence XG-7702 Keyence

$6,095.45

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-R060 Keyence

$2,756.55

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88393 Keyence

$0.00

Sold Out

Specifications

Model				OP-88393^*1
Type				Separate system
Length				30 m 98.43'
Material				PVC
Weight				Approx. 1200 g
^*1 The unit connection cable for a vertical integrated system is included with the flow meter.

Keyence AP-10SK Keyence

$0.00

Sold Out

Specifications

Model		AP-10SK
Type		Compound Sensor Head
Rated pressure		-29.9 to 29.9 inchHg
Fluid type		Gases and liquids compatible with 304 and 630 stainless steel
Type of pressure		Gauge pressure
Repeatability		0.5 % of F.S. max.
Connection port		1/8 NPT
Environmental resistance	Enclosure rating	IP67
	Pressure resistance	72.5 PSI
	Ambient temperature	-10 to 70°C(14 to 158°F), No condensation
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 3 hours respectively
	Shock resistance	500 m/s² in X, Y, and Z directions 10 times respectively (60 times in total)
Material		Diaphragm pressure port: TYPE S17400 stainless steel, Pressure port: 304 stainless steel, Throttle: 304 stainless steel (AP-14SK/15SK/16SK only)
Accessories		Sensor head connector: 1
Weight		Approx. 120 g