MS-F07 Keyence

Specifications

Model		MS-F07
Input conditions	Input voltage	85 to 264 VAC (50/60 Hz), 120 to 340 VDC^*1
	Frequency	47 to 63Hz^*2
Inputconditions	Input current (100/200 VAC)	0.28/0.16A or less
	Efficiency (100/200 VAC)	―
	Leakage current (100/200 VAC)	0.5/1mA or less
	Rush current (100/200 VAC)	18, 36 A or less (with a +25°C 77°F cold start)
Output characteristics	Rated voltage	12V
	Variable voltage range	±5% (with V.ADJ)
	Rated current	0.65A
	Ripple/noise voltage	2% (p-p) or less
	Input fluctuation	0.5% or less
	Load fluctuation	1.0% or less
	Temperature fluctuation	―
	Startup time	400ms or less
	Output holding time	20 ms or more (100 to 240 VAC)
Protection	Overcurrent protection	Constant current drop method, automatic recovery, 0.79 A or more
	Overvoltage protection	Present^*3
Display	Display power	―
	Power off memory time
	Display resolution
Applicable standards	Safety standards	UL60950, CSA C22.2 number 60950, EN60950
	EMC standard	FCC Part 15 B Class A, EN55011 Class A
	Limits for harmonic current emissions	EN61000-3-2^*4
Other	Parallel operation	Not possible
	Series operation	Possible^*5
	Cooling method	Natural air cooling
Environmental resistance	Insulation resistance	100 MΩ or more at 500 VDC (between input and output, between input and FG, and between output and FG)
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing) (see the derating characteristics)
	Relative humidity	25 to 85 % RH (No condensation)
	Withstand voltage	3.0 kVAC 50/60 Hz 1 min (across input and output terminals), 2.0 kVAC 50/60 Hz 1min (across input terminals and PE terminal), 500 VDC 1min (across output terminals and PE terminal)
	Vibration resistance	10 to 57 Hz, Double amplitude 0.3 mm 0.01", 57 to 500 Hz, 19.6 m/s² (2 G), cycle: 5.5 minutes, 2 hours in each of the X, Y, and Z directions
	Shock resistance	Peak acceleration: 300 m/s², 2 times in each of the X, Y, and Z directions
Weight		Approx. 140 g
^1 When applying for safety standards are 100 to 240 VAC, 50/60 Hz. ^2 The rated input voltage and rated frequency when applying for safety standards are 100 to 240 VAC, 50/60 Hz. ^3 To return, turn OFF the input power supply and after leaving it off for 1 minute or more, plug in the input power supply again. The E/F Series is a Zener diode clamp type. It will not restart after the protection circuit operation. ^4 For the MS2-H100, this is applicable only when the load ratio is 70% or less. ^*5 The applicable standards do not apply for parallel and serial operations.

Est. delivery between and

$324.39

1-year warranty

FREE WORDWIDE SHIPPING

Condition:

Sealed Surplus

SKU: MS-F07-Sealed

Sold out

$0.00

Never Used Surplus

SKU: MS-F07

1 verified stock

$324.39

Used

SKU: MS-F07-Used

Sold out

$0.00

Variant

Quantity:

Need More?

Specifications

Model		MS-F07
Input conditions	Input voltage	85 to 264 VAC (50/60 Hz), 120 to 340 VDC^*1
	Frequency	47 to 63Hz^*2
Inputconditions	Input current (100/200 VAC)	0.28/0.16A or less
	Efficiency (100/200 VAC)	―
	Leakage current (100/200 VAC)	0.5/1mA or less
	Rush current (100/200 VAC)	18, 36 A or less (with a +25°C 77°F cold start)
Output characteristics	Rated voltage	12V
	Variable voltage range	±5% (with V.ADJ)
	Rated current	0.65A
	Ripple/noise voltage	2% (p-p) or less
	Input fluctuation	0.5% or less
	Load fluctuation	1.0% or less
	Temperature fluctuation	―
	Startup time	400ms or less
	Output holding time	20 ms or more (100 to 240 VAC)
Protection	Overcurrent protection	Constant current drop method, automatic recovery, 0.79 A or more
	Overvoltage protection	Present^*3
Display	Display power	―
	Power off memory time
	Display resolution
Applicable standards	Safety standards	UL60950, CSA C22.2 number 60950, EN60950
	EMC standard	FCC Part 15 B Class A, EN55011 Class A
	Limits for harmonic current emissions	EN61000-3-2^*4
Other	Parallel operation	Not possible
	Series operation	Possible^*5
	Cooling method	Natural air cooling
Environmental resistance	Insulation resistance	100 MΩ or more at 500 VDC (between input and output, between input and FG, and between output and FG)
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing) (see the derating characteristics)
	Relative humidity	25 to 85 % RH (No condensation)
	Withstand voltage	3.0 kVAC 50/60 Hz 1 min (across input and output terminals), 2.0 kVAC 50/60 Hz 1min (across input terminals and PE terminal), 500 VDC 1min (across output terminals and PE terminal)
	Vibration resistance	10 to 57 Hz, Double amplitude 0.3 mm 0.01", 57 to 500 Hz, 19.6 m/s² (2 G), cycle: 5.5 minutes, 2 hours in each of the X, Y, and Z directions
	Shock resistance	Peak acceleration: 300 m/s², 2 times in each of the X, Y, and Z directions
Weight		Approx. 140 g
^1 When applying for safety standards are 100 to 240 VAC, 50/60 Hz. ^2 The rated input voltage and rated frequency when applying for safety standards are 100 to 240 VAC, 50/60 Hz. ^3 To return, turn OFF the input power supply and after leaving it off for 1 minute or more, plug in the input power supply again. The E/F Series is a Zener diode clamp type. It will not restart after the protection circuit operation. ^4 For the MS2-H100, this is applicable only when the load ratio is 70% or less. ^*5 The applicable standards do not apply for parallel and serial operations.

Model		MS-F07
Input conditions	Input voltage	85 to 264 VAC (50/60 Hz), 120 to 340 VDC^*1
	Frequency	47 to 63Hz^*2
Inputconditions	Input current (100/200 VAC)	0.28/0.16A or less
	Efficiency (100/200 VAC)	―
	Leakage current (100/200 VAC)	0.5/1mA or less
	Rush current (100/200 VAC)	18, 36 A or less (with a +25°C 77°F cold start)
Output characteristics	Rated voltage	12V
	Variable voltage range	±5% (with V.ADJ)
	Rated current	0.65A
	Ripple/noise voltage	2% (p-p) or less
	Input fluctuation	0.5% or less
	Load fluctuation	1.0% or less
	Temperature fluctuation	―
	Startup time	400ms or less
	Output holding time	20 ms or more (100 to 240 VAC)
Protection	Overcurrent protection	Constant current drop method, automatic recovery, 0.79 A or more
	Overvoltage protection	Present^*3
Display	Display power	―
	Power off memory time
	Display resolution
Applicable standards	Safety standards	UL60950, CSA C22.2 number 60950, EN60950
	EMC standard	FCC Part 15 B Class A, EN55011 Class A
	Limits for harmonic current emissions	EN61000-3-2^*4
Other	Parallel operation	Not possible
	Series operation	Possible^*5
	Cooling method	Natural air cooling
Environmental resistance	Insulation resistance	100 MΩ or more at 500 VDC (between input and output, between input and FG, and between output and FG)
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing) (see the derating characteristics)
	Relative humidity	25 to 85 % RH (No condensation)
	Withstand voltage	3.0 kVAC 50/60 Hz 1 min (across input and output terminals), 2.0 kVAC 50/60 Hz 1min (across input terminals and PE terminal), 500 VDC 1min (across output terminals and PE terminal)
	Vibration resistance	10 to 57 Hz, Double amplitude 0.3 mm 0.01", 57 to 500 Hz, 19.6 m/s² (2 G), cycle: 5.5 minutes, 2 hours in each of the X, Y, and Z directions
	Shock resistance	Peak acceleration: 300 m/s², 2 times in each of the X, Y, and Z directions
Weight		Approx. 140 g
^1 When applying for safety standards are 100 to 240 VAC, 50/60 Hz. ^2 The rated input voltage and rated frequency when applying for safety standards are 100 to 240 VAC, 50/60 Hz. ^3 To return, turn OFF the input power supply and after leaving it off for 1 minute or more, plug in the input power supply again. The E/F Series is a Zener diode clamp type. It will not restart after the protection circuit operation. ^4 For the MS2-H100, this is applicable only when the load ratio is 70% or less. ^*5 The applicable standards do not apply for parallel and serial operations.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Need More?

Contact Us

You can call, email, or chat us
we're here to support your business.

(847) 242-1595

Chat

support@plc-direct.com

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator