MD-U1000C Keyence

Specifications

Model		MD-U1000C
Type		Marking unit (controller + head) Standard area
Console		MC-P1 (sold separately)
2D code reader add-in		MD-XAD1/MD-XAD1A (sold separately)
Marking style		XYZ 3-Axis simultaneous scanning method
Marking laser	Type	YVO₄ laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10) ^*1
	Wavelength	355 nm
	Output	3 W/40 kHz (output at focal point: 2.5 W)
Q-switch frequency		CW (continuous wave), 40 to 400 kHz
Guide laser / working distance pointer		Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part1040.10) ^*1
Marking area		125 x 125 x 42 mm 4.92" x 4.92" x 1.65"
Standard working distance (±variation width)		189 mm (±21 mm) 7.44" (±0.83")
Marking resolution		2 µm
Scan speed		Max. 12,000 mm/s 472.44"/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font^*2
	Barcode	CODE39, ITF, 2of5, NW7 (Codabar) , JAN, CODE128, EAN, UPC-A, UPC-E, CODE93
	2D code	QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar	GS1 DataBar, GS1 DataBar CC-A, GS1 DataBar Stacked, GS1 DataBar Stacked CC-A, GS1 DataBar Limited, GS1 DataBar Limited CC-A, GS1 DataBar Truncated, GS1 DataBar Truncated CC-A
	Logo image	Custom character font and logo (DXF) data, BMP/JPEG/PNG/TIFF
Marking conditions	Marking style	Stationary marking, Moving marking (constant, encoder)
	Character size (height × width)	0.01 to 125 mm 0.004" to 4.92"
	Number of registered programs	2,000 max.
	Number of blocks	256
Input / Output		Terminal block I/O, MIL connector I/O, contactor control I/O
Interface		RS-232C, USB2.0, Ethernet (100BASE-TX/10BASE-T) ^*3
Marking unit installation direction		All directions
Marking unit cable length		4.3±0.1 m 14.1' ±4"
Cooling method		Forced air cooling
Overvoltage category		II
Pollution degree		2
Enclosure rating		IP64 (marking head)
Rated voltage and power consumption		100 to 240 VAC ±10%, 50/60 Hz maximum 800 (VA)/average 250 (W)
Environmental resistance	Ambient temperature	0 to + 40 °C 32 °F to 104 °F
	Ambient temperature for storage	− 10 to + 60°C 14°F to 140°F (no freezing)
	Ambient humidity for storage	Up to 85% RH (no condensation)
	Relative humidity
Weight		Controller: 23.5 kg Marking head: 18.0 kg Console: 2.0 kg
Compatible regulations		EU directive (EMC directive, low-voltage directive, RoHS directive) , EN standard (EN 55011, EN 61010-1, EN 60825-1, EN 61000-6-2, EN 50581) , CSA and UL standards (CAN/CSA C22.2 No. 61010-1, UL 61010-1) , North America regulations (FCC Part 15B, ICES-001 Class A)
^1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 The only TrueType and OpenType fonts supported are those fonts whose "Font embeddability" property is set to "Installable" or "Editable." This property can be viewed from the Properties dialog boxes of the fonts shown on the [Fonts] screen in [Control Panel] . ^*3 There are two USB ports: a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder 3 (ActiveX) . The Ethernet port supports communication with Marking Builder 3 (ActiveX) , TCP/IP communication, EtherNet/IP™ and PROFINET. PROFINET is either a registered trademark or a trademark of PROFIBUS Nutzerorganisation e.V. EtherNet/IP™ is either a registered trademark or a trademark of ODVA.

Price on request
Ask for quote

Specifications

Model		MD-U1000C
Type		Marking unit (controller + head) Standard area
Console		MC-P1 (sold separately)
2D code reader add-in		MD-XAD1/MD-XAD1A (sold separately)
Marking style		XYZ 3-Axis simultaneous scanning method
Marking laser	Type	YVO₄ laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10) ^*1
	Wavelength	355 nm
	Output	3 W/40 kHz (output at focal point: 2.5 W)
Q-switch frequency		CW (continuous wave), 40 to 400 kHz
Guide laser / working distance pointer		Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part1040.10) ^*1
Marking area		125 x 125 x 42 mm 4.92" x 4.92" x 1.65"
Standard working distance (±variation width)		189 mm (±21 mm) 7.44" (±0.83")
Marking resolution		2 µm
Scan speed		Max. 12,000 mm/s 472.44"/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font^*2
	Barcode	CODE39, ITF, 2of5, NW7 (Codabar) , JAN, CODE128, EAN, UPC-A, UPC-E, CODE93
	2D code	QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar	GS1 DataBar, GS1 DataBar CC-A, GS1 DataBar Stacked, GS1 DataBar Stacked CC-A, GS1 DataBar Limited, GS1 DataBar Limited CC-A, GS1 DataBar Truncated, GS1 DataBar Truncated CC-A
	Logo image	Custom character font and logo (DXF) data, BMP/JPEG/PNG/TIFF
Marking conditions	Marking style	Stationary marking, Moving marking (constant, encoder)
	Character size (height × width)	0.01 to 125 mm 0.004" to 4.92"
	Number of registered programs	2,000 max.
	Number of blocks	256
Input / Output		Terminal block I/O, MIL connector I/O, contactor control I/O
Interface		RS-232C, USB2.0, Ethernet (100BASE-TX/10BASE-T) ^*3
Marking unit installation direction		All directions
Marking unit cable length		4.3±0.1 m 14.1' ±4"
Cooling method		Forced air cooling
Overvoltage category		II
Pollution degree		2
Enclosure rating		IP64 (marking head)
Rated voltage and power consumption		100 to 240 VAC ±10%, 50/60 Hz maximum 800 (VA)/average 250 (W)
Environmental resistance	Ambient temperature	0 to + 40 °C 32 °F to 104 °F
	Ambient temperature for storage	− 10 to + 60°C 14°F to 140°F (no freezing)
	Ambient humidity for storage	Up to 85% RH (no condensation)
	Relative humidity
Weight		Controller: 23.5 kg Marking head: 18.0 kg Console: 2.0 kg
Compatible regulations		EU directive (EMC directive, low-voltage directive, RoHS directive) , EN standard (EN 55011, EN 61010-1, EN 60825-1, EN 61000-6-2, EN 50581) , CSA and UL standards (CAN/CSA C22.2 No. 61010-1, UL 61010-1) , North America regulations (FCC Part 15B, ICES-001 Class A)
^1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 The only TrueType and OpenType fonts supported are those fonts whose "Font embeddability" property is set to "Installable" or "Editable." This property can be viewed from the Properties dialog boxes of the fonts shown on the [Fonts] screen in [Control Panel] . ^*3 There are two USB ports: a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder 3 (ActiveX) . The Ethernet port supports communication with Marking Builder 3 (ActiveX) , TCP/IP communication, EtherNet/IP™ and PROFINET. PROFINET is either a registered trademark or a trademark of PROFIBUS Nutzerorganisation e.V. EtherNet/IP™ is either a registered trademark or a trademark of ODVA.

Model		MD-U1000C
Type		Marking unit (controller + head) Standard area
Console		MC-P1 (sold separately)
2D code reader add-in		MD-XAD1/MD-XAD1A (sold separately)
Marking style		XYZ 3-Axis simultaneous scanning method
Marking laser	Type	YVO₄ laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10) ^*1
	Wavelength	355 nm
	Output	3 W/40 kHz (output at focal point: 2.5 W)
Q-switch frequency		CW (continuous wave), 40 to 400 kHz
Guide laser / working distance pointer		Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part1040.10) ^*1
Marking area		125 x 125 x 42 mm 4.92" x 4.92" x 1.65"
Standard working distance (±variation width)		189 mm (±21 mm) 7.44" (±0.83")
Marking resolution		2 µm
Scan speed		Max. 12,000 mm/s 472.44"/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font^*2
	Barcode	CODE39, ITF, 2of5, NW7 (Codabar) , JAN, CODE128, EAN, UPC-A, UPC-E, CODE93
	2D code	QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar	GS1 DataBar, GS1 DataBar CC-A, GS1 DataBar Stacked, GS1 DataBar Stacked CC-A, GS1 DataBar Limited, GS1 DataBar Limited CC-A, GS1 DataBar Truncated, GS1 DataBar Truncated CC-A
	Logo image	Custom character font and logo (DXF) data, BMP/JPEG/PNG/TIFF
Marking conditions	Marking style	Stationary marking, Moving marking (constant, encoder)
	Character size (height × width)	0.01 to 125 mm 0.004" to 4.92"
	Number of registered programs	2,000 max.
	Number of blocks	256
Input / Output		Terminal block I/O, MIL connector I/O, contactor control I/O
Interface		RS-232C, USB2.0, Ethernet (100BASE-TX/10BASE-T) ^*3
Marking unit installation direction		All directions
Marking unit cable length		4.3±0.1 m 14.1' ±4"
Cooling method		Forced air cooling
Overvoltage category		II
Pollution degree		2
Enclosure rating		IP64 (marking head)
Rated voltage and power consumption		100 to 240 VAC ±10%, 50/60 Hz maximum 800 (VA)/average 250 (W)
Environmental resistance	Ambient temperature	0 to + 40 °C 32 °F to 104 °F
	Ambient temperature for storage	− 10 to + 60°C 14°F to 140°F (no freezing)
	Ambient humidity for storage	Up to 85% RH (no condensation)
	Relative humidity
Weight		Controller: 23.5 kg Marking head: 18.0 kg Console: 2.0 kg
Compatible regulations		EU directive (EMC directive, low-voltage directive, RoHS directive) , EN standard (EN 55011, EN 61010-1, EN 60825-1, EN 61000-6-2, EN 50581) , CSA and UL standards (CAN/CSA C22.2 No. 61010-1, UL 61010-1) , North America regulations (FCC Part 15B, ICES-001 Class A)
^1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 The only TrueType and OpenType fonts supported are those fonts whose "Font embeddability" property is set to "Installable" or "Editable." This property can be viewed from the Properties dialog boxes of the fonts shown on the [Fonts] screen in [Control Panel] . ^*3 There are two USB ports: a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder 3 (ActiveX) . The Ethernet port supports communication with Marking Builder 3 (ActiveX) , TCP/IP communication, EtherNet/IP™ and PROFINET. PROFINET is either a registered trademark or a trademark of PROFIBUS Nutzerorganisation e.V. EtherNet/IP™ is either a registered trademark or a trademark of ODVA.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Need More?

Contact Us

You can call, email, or chat us
we're here to support your business.

(847) 242-1595

Chat

support@plc-direct.com

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator