KV-NC20L Keyence

Specifications

Model

KV-NC20L

Transmission
specifications

Electrical termination (Terminator)

Set with the switch on the front panel of the main unit

Baud rate

1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps

Transmission method

Port1 : Full duplex
Port2 : Full duplex, Half duplex

Data format

Start bit

1 bit

Data bits

7 bits, 8 bits

Stop bits

1 bits, 2 bits

Error detection

Parity

Even, odd, none

RS/CS flow control

Port1 : Enabled, disabled

Interface

Communication standard

Port 1 : RS-232C
Port2 : RS-232C, RS-422A/RS-485 (4-wire), RS-485 (2-wire)

Connection

Port 1 : D-sub 9-pin
Port 2 : European terminal block

Transmission
specifications

Transmission distance

Port1 : 15 m 49.2'
Port2 : 15 m 49.2', Extendable up to 1200 m 3937.0'

Number of transmission units

Port1 : 1
Port2 : 1, 32

Indication

SD (orange), RD (orange)

Weight

Approx. 110 g

Price on request
Ask for quote
   

Notify Me When Available

Specifications

Model

KV-NC20L

Transmission
specifications

Electrical termination (Terminator)

Set with the switch on the front panel of the main unit

Baud rate

1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps

Transmission method

Port1 : Full duplex
Port2 : Full duplex, Half duplex

Data format

Start bit

1 bit

Data bits

7 bits, 8 bits

Stop bits

1 bits, 2 bits

Error detection

Parity

Even, odd, none

RS/CS flow control

Port1 : Enabled, disabled

Interface

Communication standard

Port 1 : RS-232C
Port2 : RS-232C, RS-422A/RS-485 (4-wire), RS-485 (2-wire)

Connection

Port 1 : D-sub 9-pin
Port 2 : European terminal block

Transmission
specifications

Transmission distance

Port1 : 15 m 49.2'
Port2 : 15 m 49.2', Extendable up to 1200 m 3937.0'

Number of transmission units

Port1 : 1
Port2 : 1, 32

Indication

SD (orange), RD (orange)

Weight

Approx. 110 g

Model

KV-NC20L

Transmission
specifications

Electrical termination (Terminator)

Set with the switch on the front panel of the main unit

Baud rate

1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps

Transmission method

Port1 : Full duplex
Port2 : Full duplex, Half duplex

Data format

Start bit

1 bit

Data bits

7 bits, 8 bits

Stop bits

1 bits, 2 bits

Error detection

Parity

Even, odd, none

RS/CS flow control

Port1 : Enabled, disabled

Interface

Communication standard

Port 1 : RS-232C
Port2 : RS-232C, RS-422A/RS-485 (4-wire), RS-485 (2-wire)

Connection

Port 1 : D-sub 9-pin
Port 2 : European terminal block

Transmission
specifications

Transmission distance

Port1 : 15 m 49.2'
Port2 : 15 m 49.2', Extendable up to 1200 m 3937.0'

Number of transmission units

Port1 : 1
Port2 : 1, 32

Indication

SD (orange), RD (orange)

Weight

Approx. 110 g

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Trusted By

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator