Keyence

IM-8010 Keyence

Specifications

Model				IM-8010
Type				Head
Image sensor				1" 20 megapixel monochrome CMOS
Display				12.1" LCD monitor (WXGA: 1280 x 800)
Receiver lens				Double telecentric lens
Image measurement	Field of view	Wide-field measurement mode		200 mm × 200 mm (quadangle R50)
		High-precision measurement mode		125 mm×125 mm
	Minimum display unit			0.1 µm
	Repeatability	Wide-field measurement mode	Without stage movement	±1 µm
			With stage movement	±2 µm
		High-precision measurement mode	Without stage movement	±0.5 µm
			With stage movement	±1.5 µm
	Measurement accuracy (±2σ)	Wide-field measurement mode	Without binding	±3.9 µm^*1
			With binding	±(7+0.02L) µm^*2
		High-precision measurement mode	Without binding	±2µm^*3
			With binding	±(4+0.02L) µm^*4
	Outer diameter measurement	Measurement accuracy	Wide-field measurement mode	±(2.8+0.02D) µm^*5
			High-precision measurement mode	±(1.4+0.04D) µm^*6
External remote input				Non-voltage input (contact/solid-state)
External output	OK/NG/FAIL/MEAS.			PhotoMOS output Rated load: 24 VDC, 0.5 A ON resistance: 50 mΩ or less
External illumination control	Intensity control			PWM control 100 kHz
	Output voltage			DC12V
	Output current			1.6 A (max.)
Interface	LAN			RJ-45 (10BASE-T/100BASE-TX/1000BASE-T)
	USB 3.1			4 ports (Rear: 4)
	USB 2.0 series A			4 ports (Front: 2, Rear: 2)
	Monitor output			DVI-D
Record	Hard disk drive			500 GB
Illumination system	Transparent			Telecentric transmissive illumination
	Ring			Four division multi-angle illumination (motorized) Slit ring (directional) illumination (motorized)
XY stage	Moving range			100 mm × 100 mm (motorized)
	Withstand load			5 kg
Z stage	Moving range			75 mm (motorized)
Power supply	Power voltage			100 to 240 V ±10% 50/60Hz
	Power consumption			430 VA max.
Environmental resistance	Ambient temperature			+10 to 35°C^*7
	Relative humidity			20 to 80% RH (no condensation)
	Overvoltage category			II
	Pollution degree			2
Weight				Approx. 30 kg
^1 In the range of ø80 mm and the operating ambient temperature range of +23 ± 1°C at the focused focal point position ^2 In the range of 180 mm × 180 mm (quadangle R40), when the operating ambient temperature range of +23±1°C at the focused focal point position, and when the loading weight on the stage is 2 kg or less. L is a stage movement (mm). ^3 In the range of ø20 mm and the operating ambient temperature range of +23 ± 1°C at the focused focal point position. ^4 In the range of 120 mm × 120 mm, when the operating ambient temperature range of +23±1°C at the focused focal point position, and when the loading weight on the stage is 2 kg or less. L is a stage movement (mm). ^5 Range of L118 mm × ø60 mm. When the target is placed on the center of the lens field of view at the focal point and the target axis direction is facing the horizontal lens field of view. When the operating ambient temperature range is +23 ± 1°C and D is the Y direction distance (mm). ^6 Range of L106 mm × ø20 mm. When the target is placed on the center of the lens field of view at the focal point and the target axis direction is facing the horizontal lens field of view. When the operating ambient temperature range is +23 ± 1°C and D is the Y direction distance (mm). ^*7 +15 to 35 when the XY stage speed is 80 mm/s.

Specifications

Model				IM-8010
Type				Head
Image sensor				1" 20 megapixel monochrome CMOS
Display				12.1" LCD monitor (WXGA: 1280 x 800)
Receiver lens				Double telecentric lens
Image measurement	Field of view	Wide-field measurement mode		200 mm × 200 mm (quadangle R50)
		High-precision measurement mode		125 mm×125 mm
	Minimum display unit			0.1 µm
	Repeatability	Wide-field measurement mode	Without stage movement	±1 µm
			With stage movement	±2 µm
		High-precision measurement mode	Without stage movement	±0.5 µm
			With stage movement	±1.5 µm
	Measurement accuracy (±2σ)	Wide-field measurement mode	Without binding	±3.9 µm^*1
			With binding	±(7+0.02L) µm^*2
		High-precision measurement mode	Without binding	±2µm^*3
			With binding	±(4+0.02L) µm^*4
	Outer diameter measurement	Measurement accuracy	Wide-field measurement mode	±(2.8+0.02D) µm^*5
			High-precision measurement mode	±(1.4+0.04D) µm^*6
External remote input				Non-voltage input (contact/solid-state)
External output	OK/NG/FAIL/MEAS.			PhotoMOS output Rated load: 24 VDC, 0.5 A ON resistance: 50 mΩ or less
External illumination control	Intensity control			PWM control 100 kHz
	Output voltage			DC12V
	Output current			1.6 A (max.)
Interface	LAN			RJ-45 (10BASE-T/100BASE-TX/1000BASE-T)
	USB 3.1			4 ports (Rear: 4)
	USB 2.0 series A			4 ports (Front: 2, Rear: 2)
	Monitor output			DVI-D
Record	Hard disk drive			500 GB
Illumination system	Transparent			Telecentric transmissive illumination
	Ring			Four division multi-angle illumination (motorized) Slit ring (directional) illumination (motorized)
XY stage	Moving range			100 mm × 100 mm (motorized)
	Withstand load			5 kg
Z stage	Moving range			75 mm (motorized)
Power supply	Power voltage			100 to 240 V ±10% 50/60Hz
	Power consumption			430 VA max.
Environmental resistance	Ambient temperature			+10 to 35°C^*7
	Relative humidity			20 to 80% RH (no condensation)
	Overvoltage category			II
	Pollution degree			2
Weight				Approx. 30 kg
^1 In the range of ø80 mm and the operating ambient temperature range of +23 ± 1°C at the focused focal point position ^2 In the range of 180 mm × 180 mm (quadangle R40), when the operating ambient temperature range of +23±1°C at the focused focal point position, and when the loading weight on the stage is 2 kg or less. L is a stage movement (mm). ^3 In the range of ø20 mm and the operating ambient temperature range of +23 ± 1°C at the focused focal point position. ^4 In the range of 120 mm × 120 mm, when the operating ambient temperature range of +23±1°C at the focused focal point position, and when the loading weight on the stage is 2 kg or less. L is a stage movement (mm). ^5 Range of L118 mm × ø60 mm. When the target is placed on the center of the lens field of view at the focal point and the target axis direction is facing the horizontal lens field of view. When the operating ambient temperature range is +23 ± 1°C and D is the Y direction distance (mm). ^6 Range of L106 mm × ø20 mm. When the target is placed on the center of the lens field of view at the focal point and the target axis direction is facing the horizontal lens field of view. When the operating ambient temperature range is +23 ± 1°C and D is the Y direction distance (mm). ^*7 +15 to 35 when the XY stage speed is 80 mm/s.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Price on request
Ask for quote

Specifications

Model				IM-8010
Type				Head
Image sensor				1" 20 megapixel monochrome CMOS
Display				12.1" LCD monitor (WXGA: 1280 x 800)
Receiver lens				Double telecentric lens
Image measurement	Field of view	Wide-field measurement mode		200 mm × 200 mm (quadangle R50)
		High-precision measurement mode		125 mm×125 mm
	Minimum display unit			0.1 µm
	Repeatability	Wide-field measurement mode	Without stage movement	±1 µm
			With stage movement	±2 µm
		High-precision measurement mode	Without stage movement	±0.5 µm
			With stage movement	±1.5 µm
	Measurement accuracy (±2σ)	Wide-field measurement mode	Without binding	±3.9 µm^*1
			With binding	±(7+0.02L) µm^*2
		High-precision measurement mode	Without binding	±2µm^*3
			With binding	±(4+0.02L) µm^*4
	Outer diameter measurement	Measurement accuracy	Wide-field measurement mode	±(2.8+0.02D) µm^*5
			High-precision measurement mode	±(1.4+0.04D) µm^*6
External remote input				Non-voltage input (contact/solid-state)
External output	OK/NG/FAIL/MEAS.			PhotoMOS output Rated load: 24 VDC, 0.5 A ON resistance: 50 mΩ or less
External illumination control	Intensity control			PWM control 100 kHz
	Output voltage			DC12V
	Output current			1.6 A (max.)
Interface	LAN			RJ-45 (10BASE-T/100BASE-TX/1000BASE-T)
	USB 3.1			4 ports (Rear: 4)
	USB 2.0 series A			4 ports (Front: 2, Rear: 2)
	Monitor output			DVI-D
Record	Hard disk drive			500 GB
Illumination system	Transparent			Telecentric transmissive illumination
	Ring			Four division multi-angle illumination (motorized) Slit ring (directional) illumination (motorized)
XY stage	Moving range			100 mm × 100 mm (motorized)
	Withstand load			5 kg
Z stage	Moving range			75 mm (motorized)
Power supply	Power voltage			100 to 240 V ±10% 50/60Hz
	Power consumption			430 VA max.
Environmental resistance	Ambient temperature			+10 to 35°C^*7
	Relative humidity			20 to 80% RH (no condensation)
	Overvoltage category			II
	Pollution degree			2
Weight				Approx. 30 kg
^1 In the range of ø80 mm and the operating ambient temperature range of +23 ± 1°C at the focused focal point position ^2 In the range of 180 mm × 180 mm (quadangle R40), when the operating ambient temperature range of +23±1°C at the focused focal point position, and when the loading weight on the stage is 2 kg or less. L is a stage movement (mm). ^3 In the range of ø20 mm and the operating ambient temperature range of +23 ± 1°C at the focused focal point position. ^4 In the range of 120 mm × 120 mm, when the operating ambient temperature range of +23±1°C at the focused focal point position, and when the loading weight on the stage is 2 kg or less. L is a stage movement (mm). ^5 Range of L118 mm × ø60 mm. When the target is placed on the center of the lens field of view at the focal point and the target axis direction is facing the horizontal lens field of view. When the operating ambient temperature range is +23 ± 1°C and D is the Y direction distance (mm). ^6 Range of L106 mm × ø20 mm. When the target is placed on the center of the lens field of view at the focal point and the target axis direction is facing the horizontal lens field of view. When the operating ambient temperature range is +23 ± 1°C and D is the Y direction distance (mm). ^*7 +15 to 35 when the XY stage speed is 80 mm/s.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator

IM-8010 Keyence

Specifications

Specifications

Specifications

IM-8010 Keyence

Specifications

Specifications

Trusted By

You may also like

Recently viewed