Vision Systems

$0.00

Sold Out

Specifications

Model				R-7
Type				Reflector
Applicable product				LV Series

Keyence OP-87569 Keyence

$0.00

Sold Out

Specifications

Model				OP-87569
Cable end				M12 L-shaped type - Loose wires
Length				5 m 16.40'
Material				Covering: PVC, Nut: Nickel plating over zinc die-cast

Keyence GS-71PCSO(3197) Keyence

$0.00

Sold Out

Specifications

Model			GS-71PCSO(3197)
Lock type			Power-to-lock type
Type			Standard type
Response time	Lock	Lock→Unlock	320 ms^1^2
		Unlock→Lock	220 ms^1^2^*3
Lock	Locking force (Fzh)		Min. 2,000 N
	Alignment tolerance of lock		±2 mm ±0.08"
	Mechanical life-span		1 million cycles or more (with door operation speed of 1 m/s)
	Acceptable operation frequency		1 Hz^*4
	Door radius		Min. 250 mm 9.84"
	Auxiliary release		Front, back ^*5
Cascading			Max. 25 units
Control output (OSSD output)	Output		Transistor outputs × 2
	Max. load current		Max. 150 mA
	Residual voltage (during ON)		Max 2.5 V (with a cable length of 5 m 16.40')
	OFF state voltage		Max 2.0 V (with a cable length of 5 m 16.40')
	Leakage current		Max. 0.5 mA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
AUX (Non-safety related output)	Output		Transistor output
	Number of outputs		1
	Max. load current		50 mA
	Residual voltage (during ON)		Max 2.5 V (with a cable length of 5 m 16.40')
External input (Short-circuit current)	Safety input		Approx.1.5 mA × 2
	Reset/EDM input		-
	Lock control input		Approx. 2.5 mA × 1
	OSSD operation switching input		-
Applicable Standards (Safety)			EN 61508, IEC 61508(SIL2/SIL3) EN 62061, IEC62061(SIL CL2/SIL CL3) EN ISO13849-1: 2015(PLd, Category 2/PLe, Category 4) EN ISO14119(Type4) IEC 60947-5-3, EN 60947-5-3 UL 61010-1, CAN/CSA-C22.2 No.61010-1
Protection circuit			Reverse current protection, short-circuit protection and surge protection for each output
Power supply	Power voltage		24 V DC ±20 % (Ripple P-P 10 % or less, Class2)
	Power consumption		3.4 W^*6
Environmental resistance	Enclosure rating		IP65/67(IEC60529), IP69K(ISO 20653) (TÜV SÜD certified), Enclosure Type 3/4X/12/13 (NEMA250)
	Operating ambient temperature		-20°C to +55C° -4°F to 131°F (No freezing)
	Operating relative humidity		5% to 95%RH
	Storage temperature		-25°C to +70°C -13°F to 158°F (No freezing)^*7
	Storage relative humidity		5% to 95%RH
	Vibration resistance		10 to 55 Hz, Double amplitude 2.0 mm 0.08", 5 minutes in each of the X, Y, and Z directions (IEC 60947-5-3)
	Shock resistance		30 G in X, Y, Z directions 6 times each axis (IEC 60947-5-3)
Material	Sensor main unit	Case	SUS304, PPS, PBT, PAR, PA66, NBR
		Lock	Aluminum alloy, Zinc die cast (Nickel chrome plating)
		Cable	PVC
	Actuator	Case	PPS, PBT, NBR
		Lock	Aluminum alloy, SUS303
Weight			Approx. 380 g
^1 Risk time according to IEC60947-5-3 is 150 ms + 2 ms × (number of units cascaded -1). ^2 If the OSSD operation is open/close link mode, Detect→ Not detect: 20 ms + 2 ms × (number of units cascaded -1), Not detect → Detect: 30 ms + 25 ms × (number of units cascaded -1) ^3 430 ms when locked at the same time the actuator is detected. ^4 Acceptable door operation frequency is 3 Hz if the OSSD operation is open/close link mode. In that case, operation distance is Sao(OFF→ ON) = 3 mm 0.12", Sar(OFF→ ON) = 10.5 mm 0.41". ^5 Do not apply excessive torque (0.45N·m or higher). ^6 Power consumption temporarily increases (Max. 10.5 W, Approx. 0.2 s) when the lock control input(s) is(are) turned ON. After that, current consumption will be within the specification. ^*7 When stored for a long period of time, please store it at a temperature of 55°C 131°F or lower.

Keyence EV-130F Keyence

$447.36

Only 5 units left

Specifications

Model		EV-130F
Type		Spatter-resistant/Shielded
Shape		M30
Detecting distance		10 mm 0.39" ±10%
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		30 x 30 mm 1.18" x 1.18"
Hysteresis		15% max. of detecting distance
Response frequency		250 Hz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at 23°C 73.4°F, within -25 to +70°C -13 to +158°F
Control output (switching capacity)		5 to 200 mA
Protection circuit		Reversed polarity, short-circuit, surge voltage
Cable length		2 m 6.6'
Rating	Power voltage	12 to 24 VDC, Ripple (P-P) 20 % or less
	Current consumption (leakage current)	Current consumption (leakage current): 1.0 mA max., Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
	Residual voltage	Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 3 times in each of the X, Y, and Z directions
Case material		Fluoro-chemical-coated brass
Accessories		Screw nut x 2, toothed washer x 1
Weight		Approx. 300 g

Keyence VH-Z100R Keyence

$5,696.42

Only 9 units left

Specifications

Model		VH-Z100R
Magnification		100 x, 200 x, 300 x, 500 x, 700 x, 1000 x^*1
Field-of-view	Horizontal	100 x: 3.05 mm 0.12" 200 x: 1.53 mm 0.06" 300 x: 1.02 mm 0.04" 500 x: 0.61 mm 0.02" 700 x: 0.44 mm 0.02" 1000 x: 0.30 mm 0.01"
	Vertical	100 x: 2.28 mm 0.09" 200 x: 1.14 mm 0.04" 300 x: 0.76 mm 0.03" 500 x: 0.46 mm 0.02" 700 x: 0.33 mm 0.01" 1000 x: 0.23 mm 0.01"
	Diagonal	100 x: 3.81 mm 0.15" 200 x: 1.90 mm 0.07" 300 x: 1.27 mm 0.05" 500 x: 0.76 mm 0.03" 700 x: 0.54 mm 0.02" 1000 x: 0.38 mm 0.01"
Working distance		100 x, 200 x, 300 x, 500 x, 700 x, 1000 x:25 mm 0.98" (20 mm 0.79"^*2)
^1 Magnification on a 15-inch monitor. ^2 The Dual Light Base Unit (OP-88164) and the Adjustable Illumination (OP-72402) are attached.

Keyence AP-15S Keyence

$546.60

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-92302 Keyence

$0.00

Sold Out

Specifications

Model				OP-92302
Type				Super-tough contact
Applicable product				AT Series

Keyence OP-87551 Keyence

$0.00

Sold Out

Specifications

Model				OP-87551
Overview				Anti-condensation mounting brackets (G3/4) for the FL-001.
Applicable product				FL-001
Material				SUS303
Note				2 gaskets for the FL-001 (OP-87548) are included.

Keyence BL-1301HA Keyence

$471.23

In stock, 13 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88575 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LM-1100 Keyence

$0.00

Sold Out

Specifications

Model				LM-1100
Type				Head
Image sensor				1", 20-mega pixel monochrome CMOS
Display				10.4" LCD monitor (XGA: 1024 × 768)
Receiver lens				Double telecentric lens
Image measurement	Field of view	Wide-field measurement mode		225 mm × 125 mm 8.86" × 4.92"
		High-precision measurement mode		206 mm × 106 mm 8.11" × 4.17"
	Minimum display unit			0.1 µm
	Repeatability	Inside camera's field of view (2σ)	Wide-field measurement mode	±0.5 µm
			High-precision measurement mode	±0.1 µm
		With stage movement	X/Y axis	±0.9 µm
			X/Y plane
	Measurement accuracy	Inside camera's field of view (2σ)	Wide-field measurement mode	±2 µm^*1
			High-precision measurement mode	±0.7 µm^*2
		With stage movement	X/Y axis (EUX,MPE , EUY,MPE)	±(1.8 + 0.02 L) µm^*3
			X/Y plane (EUXY,MPE)	±(2.8 + 0.02 L) µm^*3
AF height measurement	Repeatability			±2 µm
	Measurement accuracy (EUZ,MPE)			±(4.8 + 0.04 L) µm^*4
External remote input				Non-voltage input (with and without contact)
External output	OK/NG/FAIL/MEAS.			PhotoMOS output Rated load 24 V DC, 0.5 A ON resistance 50 mΩ or lower
Interface	LAN			RJ-45 (10BASE-T/100BASE-TX/1000BASE-T)
	USB 3.1			2 ports (rear: 2)
	USB 2.0 Series A			4 ports (front: 2, rear: 2)
	Monitor output			DVI-D
Record	Hard disk drive			500 GB
Illumination system	Transparent			Telecentric transparent illumination
	Ring			Four division, multi-angle illumination (electric) Slit ring (directivity) illumination (electric) Telecentric coaxial illumination
External illumination control	Intensity control			PWM control, 100 kHz
	Output voltage			12 V DC
	Output current			1.6 A (max.)
XY stage	Moving range			200 mm × 100 mm 7.87" × 3.94" (electric)
	Withstand load			7 kg
Z stage	Moving range			75 mm 2.95" (electric)
Power supply	Power voltage			100 to 240 V AC ±10% (50/60 Hz)
	Power consumption			430 VA or lower
Environmental resistance	Ambient temperature			+10 to 35°C +50 to 95°F^*5
	Relative humidity			20–80% RH (no condensation)
	Overvoltage category			ll
	Pollution degree			2
Weight				Approx. 30 kg
^1 In the range of 20 mm × 20 mm 0.79" × 0.79" within the operating ambient temperature range of +23°C ±1°C +73.4°F ±1.8°F at the focused focal point position. ^2 In the range of 5 mm × 5 mm 0.20" × 0.20" within the operating ambient temperature range of +23°C ±1°C +73.4°F ±1.8°F at the focused focal point position ^3 In accordance with ISO10360-7, within the operating ambient temperature range of +23°C ±1°C +73.4°F ±1.8°F at the focused focal point position, and with a load weighing 2 kg or less on the stage (L = amount of X/Y stage movement in mm units) ^4 In accordance with ISO10360-7, within the operating ambient temperature range of +23°C ±1°C +73.4°F ±1.8°F, set to a maximum measurement of 50 mm 1.97" or less, (L = amount of Z stage movement in mm units). ^*5 +15 to 35°C +59 to 95°F with X/Y stage travel speed of 80 mm/s.

Keyence KV-CAL16 Keyence

$0.00

Sold Out

Specifications

Model				KV-CAL16
Focal distance				16 mm 0.63"
F-stop				F1.6 to CLOSE
Minimum working distance				0.4 m 1.3'
Supported cameras				KV-CAC1H/KV-CAC1R

Keyence FU-F38H Keyence

$0.00

Sold Out

Specifications

Model		FU-F38H
Type		Definite-reflective model
Standard detection object		Mirrored surface with a reflectivity of approximately 98%
Detection distance	TERA	0.3 to 2.3 mm 0.0118" to 0.0906"^*1
	MEGA
	ULTRA	0.3 to 2.2 mm 0.0118" to 0.0866"^*1
	SUPER	0.4 to 2.0 mm 0.0157" to 0.0787"^*1
	TURBO	0.5 to 1.8 mm 0.0197" to 0.0709"^*1
	FINE	0.6 to 1.6 mm 0.0236" to 0.0630"^*1
	HSPD	—^*1
	S-HSPD
Minimum bend radius	Fiber cable	R4 mm R0.14" or more
	Film fiber	No bending^*2
Tightening torque	Tip detector/relay case	4.3 cN•m (M1.6)
Length	Fiber cable	Approx. 1000 mm 39.37" (free-cut)
	Film fiber	Approx. 131 mm 5.16"
Environmental resistance	Ambient temperature	5°C to 60°C 41°F to 140°F Up to 70 mm 2.76" from film fiber unit end: 5°C to 105°C 41°F to 221°F^3^4^*5
	Relative humidity	35 to 85% RH (No condensation)
Material	Fiber cable	Fiber coating: Polyethylene, Fiber core: Acrylic
	Relay case	PC, SUS304
	Film fiber	Polyimide, Special optical resin, SUS304
Accessories		Fiber cutter, FU adapter, Usage Precautions sheet
Weight		Approx. 3 g
^1 Values are for FS-N40 Series devices with standard detectable objects. ^2 Do not fix the fiber in a bent state for use. Temporary bends of R10 mm R0.39" or more are possible during handling (does not apply to tip detector). ^3 Use in dry conditions in temperatures exceeding 60°C 140°F. ^4 The recommended maximum ambient temperature is 90°C 194°F for constant use of a fiber unit in a high-temperature environment. ^*5 Contact KEYENCE for use in situations exceeding those listed above.

Keyence OP-88638 Keyence

$0.00

Sold Out

Specifications

Model				OP-88638
Type				2-axis adjustment mounting bracket (when illumination unit is used)
Weight				Approx. 260 g

Keyence FU-63T Keyence

$0.00

Sold Out

Specifications

Model		FU-63T^*1
Beam emitting direction		Top
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø1.3×2
Minimum bend radius		R25 mm0.984"
Minimum detectable object		Gold wire with a diameter of 0.005 mm0.0002" ^*2
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 10 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence OP-85584 Keyence

$0.00

Sold Out

Specifications

Model				OP-85584
Overview				This is a connector cable for the M8 connector sensor. This connector cable is made of polyurethane (PUR), which has excellent oil resistance.
Applicable product				M8 connector sensor
Cable end				M8 L-shaped connector - Loose wire
Length				2 m 6.56'
Material				Cable: Polyurethane (PUR)
Weight				Approx. 65 g

Keyence OP-88951 Keyence

$0.00

Sold Out

Specifications

Model				OP-88951
Length				10 m 32.8'

Keyence OP-89122 Keyence

$0.00

Sold Out

Specifications

Model				OP-89122
Type				M12 Quick-Swap Bracket
Applicable sensor size				M8
Material				Body: SUS303 Nut: SUS304 Toothed washer: SUS304
Weight				Approx. 30 g 1.06 oz

Keyence OP-86930 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87444 Keyence

$161.01

Only 8 units left

Specifications

Model				OP-87444
Type				Monitor power cable
Cable end				M8 4-pin / Strand wire
Length				5 m 16.4'

Keyence KV-N16EX Keyence

$395.75

Only 3 units left

Specifications

Model				KV-N16EX
Expansion input unit	External connection method			Terminal block
	Input terminals			24 VDC mode,5 VDC mode
	Maximum input voltage			26.4 VDC
	Input rated voltage	24 VDC mode		5.3 mA
		5 VDC mode		1 mA
	Minimum ON voltage	24 VDC mode		19 V
		5 VDC mode		3.5 V
	Maximum OFF current	24 VDC mode		1.5 mA
	Maximum OFF voltage			1.5 V
	Common method			16 points/1 common (2 terminals) ^*1
	Input time constant (four-level switching)	Input time constant setting	OFF to ON: Typ.	25 μs : 10 μs 300 μs : 240 μs 1 ms : 1 ms 10 ms : 10 ms
			OFF to ON: Max.	25 μs : 50 μs 300 μs : 290 μs 1 ms : 1.2 ms 10 ms : 11 ms
			ON to OFF: Typ.	25 μs : 50 μs 300 μs : 280 μs 1 ms : 1 ms 10 ms : 10 ms
			ON to OFF: Max.	25 μs : 150 μs 300 μs : 390 μs 1 ms : 1.2 ms 10 ms : 11 ms
	Input impedance			4.3 kΩ
Internal current consumption				20 mA or less
Weight				Approx. 220 g
^*1 The KV-N8EX and KV-N16EX have 2 COM terminals, but these are shared internally.

Keyence AT2-301 Keyence

$3,131.10

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IV3-500CA Keyence

$2,161.30

In stock, 14 units

Specifications

Model		IV3-500CA
Type		Standard
Installed distance		50 mm 1.97" or more ^*1
Tools	Available modes	Standard mode / Sorting mode
	Tool with standard mode	Learning, Outline, Color area ^2, Area ^3, Edge pixels, Color average ^2, Brightness average ^3, Width, Diameter, Edge presence, Pitch, OCR, Color prohibit ^*4, Brightness prohibit, Position adjustment, High-speed position adjustment (1-axis edge/2-axis edge), Blob count
	Number of tools	Total: 65 tools ^*5
Field of view		Installed distance 50 mm 1.97": 22 (H) × 16 (V) mm 0.87" (H) × 0.63" (V) to Installed distance 3000 mm 118.11": 1184 (H) × 888 (V) mm 46.61" (H) × 34.96" (V)
Switch settings (programs)		128 programs (when using SD card) / 32 programs (when not using SD card)
Image receiving element	Type	1/2.9 inch color CMOS
	Number of pixels	1280 (H) × 960 (V)
Image history	Number of storable images	100 images ^*6
	Save conditions	Selectable between NG only, NG and OK near threshold ^7, and All ^6
Focus adjustment		Auto ^*4
Image data transfer	Transfer destination	Selectable between SD card, FTP server and SFTP server
	Transfer format	Selectable between bmp, jpeg, iv3p, and txt, and file names can be modified
	Transfer conditions	Selectable between NG only, NG and OK near threshold ^*8, and All
Exposure time		12 μs to 10 ms
Analysis information	RUN display	Tools list (Judgment results, degree of similarity, or degree of similarity bar display) ^*8
	RUN information	Switchable between OFF, histogram, processing time, count, and output monitor Histogram: Histogram, degree of similarity (Max., Min., Ave.), Number of OKs, Number of NGs Processing time: Processing time (latest, Max., Min., Ave.) Count: Trigger numbers, Number of OKs, Number of NGs, Trigger errors, Strobe errors Output monitor: ON/OFF status by output ^*8
Lights	Illumination	White LED
	Lighting method	Pulse lighting/ continuously lighting is switchable.
Other functions	Image capture function	Digital zoom (2×, 4×), HDR, High gain, Color filter ^2, White balance ^2, Brightness correction, AI capture
	Tool functions	Additional learning, Mask outline, Masking function, Color extraction/exclusion ^2, Color histogram function ^2, Monochrome histogram function ^*3, Scaling function
	Utilities	Failing sensor list, Failure hold, Test run, I/O monitor, Security settings (Two-factor password), Simulator ^*9, Additional FTP/SFTP Image Information, Multi-position adjustment, Multi-master image registration, High-speed program switching, Auto program switching, Auto setting backup/restore, Threshold changing in RUN
Indicators		OUT, TRIG, STATUS, LINK/ACT, SD
Input	Type	Switchable between non-voltage input and voltage input For no-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit) For voltage input: Maximum input rating 30 V, ON voltage 18 V or higher, OFF current 0.15 mA or lower, ON current 2 mA (for 24 V)
	Number of inputs	6 ports, 3 ports are selectable as IN/OUT
	Function	IN1: External trigger, IN2, IN3, I/O1 to I/O3: Enable by assigning optional functions Assignable functions: Program switching, Clear error, External master image registration, SD card save cancel
Output	Type	Photo MOS relay output, N.O./N.C. Switchable Maximum rating 30 V 50 mA, residual voltage 1.5 V or less ^*10
	Number of outputs	6 ports, 3 ports are selectable as IN/OUT
	Function	Enable by assigning the optional functions Assignable functions: Total judgment (OK/NG), Run, Busy, Position adjustment result, Judgment result of each tool, Result of the logical operation of each tool, Error, SD card error, Variety discrimination result, Master judgment result
Power/I/O	Connector	M12 12 pin A code Male connector
	PoE	PoE power Class 3/4/6 ^*11
Ethernet	Standard	1000BASE-T/100BASE-TX
	Connector	M12 8 pin X code Female connector
Network function		FTP client, SFTP client
Interface compatibility	Built-in Ethernet	EtherNet/IP™, PROFINET ^*12, TCP/IP non-procedure communication
Expanded memory		microSD card (microSD/microSDHC) ^*13
Ratings	Power voltage	24 VDC +25%/-20% (including ripple) ^*14
	Current consumption	3.3 A or less (without the AI Lighting unit, and including the output load) 1.8 A or less (AI Lighting unit, and including the output load) ^*15
Environmental resistance	Enclosure rating	IP67 ^*16
	Ambient temperature	0 to +50°C 32 to 122°F (No freezing) ^*17
	Relative humidity	35 to 85% RH (No condensation)
	Vibration resistance	10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions ^*18
	Shock resistance	500 m/s² 1640'/s², 3 times in each of the 6 directions ^*18
Material		Main unit case: Aluminum die-casting/PBT/TPU Indicator light cover: TPU Ethernet connector: Aluminum die-casting/LCP Front cover: Acrylic (hard coating) Power connector: Aluminum die-casting/LCP Nameplate: PET Water proof cap for the Power connector: PC+ABS alloy Water proof cap for the Ethernet connector: PC
Weight		Approx. 300 g 10.59 oz (without the AI Lighting unit) Approx. 495 g 17.47 oz (with the AI Lighting unit)
^1 Removing the polarizing filter is recommended when used at distances of 3 m 9.8' or more. ^2 Color type only. ^3 Monochrome type only. ^4 The focusing position can be automatically adjusted at the time of installation. Disabled during operation. The focusing position can be registered by programs. ^5 Tools can be installed by programs. This is the number of detection tools and position adjustment tools. Up to 64 detection tools can be set. The number of detection tools in Sorting mode are eight tools. ^6 Saves to the sensor’s internal memory. The images saved to the sensor can be backed up to a USB memory stick inserted into the control panel (IV3-CP50) or to the PC where the software for the IV3 Series (IV3-H1) is being used. ^7 Learning tool only. ^8 Can also be displayed on the control panel (IV3-CP50) or the software for the IV3 Series (IV3-H1). ^9 Usable on the software for the IV3 Series (IV3-H1). ^10 Make sure to keep a total of each output with 120 mA or less. ^11 For a PoE power supply device, IEEE802.3at power class 4 or higher is recommended when using the AI Lighting unit, and IEEE802.3bt power class 6 or higher is recommended when the AI Lighting unit is not used. When using PoE operation may be restricted due to power limitation. ^12 Conformance Class B, applicable protocol: LLDP, SNMP. ^13 Use only products recommended by KEYENCE. ^14 When using the OP-88656 (10 m 32.8'), the power voltage is 24 V DC +25%/-10% (including ripple). ^15 The peak current is designed to be smaller if the AI Lighting unit is mounted. The peak current is greater if the AI Lighting unit is not mounted. ^16 Except when the polarizing filter (OP-88640/OP-88641/OP-88644/OP-88645) is mounted. ^17 For situations where the operating ambient temperature will exceed 40°C 104°F, follow KEYENCE’s specified heat dissipation measures to ensure the case temperature does not exceed the rated maximum temperature (65°C 149°F). Check the instruction manual for more information. ^18 Except when the dome attachment (IV3-D10) is mounted.

Keyence ER-GR12P Keyence

$0.00

Sold Out

Specifications

Model		ER-GR12P
Type		Environment-resistant all-metal shielded type Screw type M12 Cable PNP output
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		None
Button	Function	―
Detecting distance		7 mm 0.28" ±10% ^*2
Response frequency		100 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		21 × 21 mm 0.83" × 0.83"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±20% or less of detecting distance at +25°C +77°F (-40 to -25°C -40°F to -13°F, +55 to +85°C 131°F to 185°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP68G (JIS C 0920), IP69K (DIN40050)
	Ambient temperature	-40 to +85°C -40°F to +185°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G2 /Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface and case: SUS316L, Nut: SUS316L, Toothed lock washer: SUS316L [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP) [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 75 g 2.65 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +70°C +158°F or higher is 33% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.