Sensors & Detection

$161.54

In stock, 44 units

Specifications

Model		EH-614A
Type		Standard , Shielded , ULTRA thin
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		15 x 15 mm 0.59" x 0.59"
Stable detecting range		0 to 5 mm0.20"
Maximum detecting distance		8 mm0.31"
Hysteresis		0.05 mm0.002"
Repeatability		0.005 mm0.0002"
Temperature characteristics		±10% max. of detecting distance at 23°C 73.4°F, within -10 to +60°C 14 to 140°F
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 57 g (including nuts and 3-m 9.8' cable)

Sick FX3-XTIO84002 FLEXISOFT 8IN/4OUT Sick

$360.02

Only 10 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Omron NX-ILM400 Omron

$296.18

Only 5 units left

NX series IO-Link master IP20 4 channels

Keyence LR-W500C Keyence

$545.49

In stock, 17 units

Specifications

Model		LR-W500C
Type		M12 connector 4-pin type
Detecting distance		30 to 500 mm 1.18" to 19.69"
Min. spot diameter		Adjustable spot Approx. ø3.5 mm at 100 mm ø0.14" at 3.94" Approx. ø9 mm at 250 mm ø0.35" at 9.84" Approx. ø18 mm at 500 mm ø0.71" at 19.69"
Light source		White LED
Mutual interference reduction function		Up to 2 units when alternate frequencies set
Timer		OFF/ON delay/OFF delay/One-shot
Response time		200 µs/1 ms/10 ms/100 ms/500 ms selectable ^*1
I/O	Control output	NPN open collector/PNP open collector selectable 30 VDC or less, 50 mA or less, remaining voltage: 2 V or less N.O./N.C. selectable ^*2
	External input	Tuning /Transmission OFF selectable Short circuit current: 1 mA or less for NPN/2 mA or less for PNP For the applied voltage, see the wiring diagrams in the instruction manual. For the input times, see the time charts in the instruction manual. ^*2
Protection circuit		Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection
Power supply	Power voltage	10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
	Current consumption	65 mA or less (without load) at 24 VDC; 120 mA or less (without load) at 12 VDC ^*3
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient light	Incandescent lamp: 10,000 lux or less, Sunlight: 20,000 lux or less
	Ambient temperature	-20 to +50 °C -4 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: Zinc die cast (Nickel chrome plating), Indicator cover: PPSU, Buttons: PES Lens cover and display: PMMA (scratch-resistant coating), Spot adjustment dial: Iron (triiron tetraoxide coated) Connector ring: PMP, Connector socket: PEI
Weight		Approx. 110 g
^1 When alternate frequencies are set, the response time increases by approximately 20%. ^2 IO-Link: Specification v.1.1/COM2 (38.4 kbps) is supported. The setup file can be downloaded from KEYENCE website (http://www.keyence.com). If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office. ^*3 195 mA or less (at 10 V, with load)

Omron S8VK-T24024 Omron

$200.13

Only 7 units left

DIN Rail Power Supplies PS 3-phse 240W24

Omron GX-JC06-H Omron

$334.89

Only 2 units left

Ethernet Modules SPECIAL SEMICONDUCTOR JS

Omron GRT1-AD2 Omron

$414.20

In stock, 11 units

I/O Modules 2pt Analog Input

Keyence LR-ZB100CP Keyence

$341.96

Only 6 units left

Specifications

Model		LR-ZB100CP
Type		Distance based laser sensor
Appearance		Rectangular
Output		PNP
Cable connection		M8 connector, 4-pin
Detectable distance		35 to 100 mm 1.38" to 3.94" (650 to 0)^*1
Standard detectable deviation		35 to 50 mm 1.38" to 1.97": 1.5 mm 0.06" 50 to 100 mm 1.97" to 3.94": 3 mm 0.12"
Display resolution		2 (0.2 mm 0.008")
Spot size		Approx. 2 × 1 mm 0.08" × 0.04" at 100 mm 3.94"
Response time		1.5 ms / 10 ms / 50 ms selectable
Light source	Type	Red laser (660 nm)
	Laser class	Class 1 laser product (IEC60825-1, FDA (CDRH) Part1040.10^*2)
Function	Indicator	3-digit 7-segment display (red), output indicator (yellow), DATUM indicator (orange), 1 spot indicator (green)
	Timer	OFF/ON delay/OFF delay/One-shot
Specifications	Power voltage	10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
	Power consumption	450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)
	Control output	PNP Open collector, Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mA
	Protection circuit	Protection against reverse power connection, output overcurrent, output surge, reverse output connection
	Output operation	Light-ON / Dark-ON selectable
	External input	Input time calibration: 35 ms or more ON, 35 ms or more OFF Laser emission stop: 2 ms or more ON, 20 ms or more OFF Short-circuit current NPN: 1 mA or less/PNP: 2 mA or less
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB^3, Diversey^3
	Insulation resistance	20 MΩ or more (500 VDC)
	Ambient light	Incandescent lamp: 4,000 lux or less Sunlight: 8,000 lux or less^*4
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F (No freezing)
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKM
Accompanying items		Instruction Manual, Certification/Identification label (FDA)
Weight		Approx. 55 g
^1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed. ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 Have passed resistance tests with cleaning agents from multiple manufactures. ^4 When the response time is 10 ms

Sick NANS3-CAAZ30AN1 NS3 PRO IO 3M Sick

$2,311.45

In stock, 17 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Omron NX-PF0630 Omron

$102.95

In stock, 11 units

NX I/O power feed unit, 5-24 V DC input, 8 terminals, 4A, screwless push-in connector, 12mm wide

Omron E3Z-R86 Omron

$96.09

In stock, 11 units

Omron Retroreflective Photoelectric Sensor, Rectangular Sensor, 4000 mm Detection Range

Omron NX-ECC201 Omron

$227.57

In stock, 11 units

EtherCAT Coupler Unit, 46 MM x 71 MM x 100 MM, 5 to 24 VDC, 4 A, 1.45 W, 63-Input, EtherCAT Coupler Unit for Automation Control System Networking Distributed Input/Output.

Keyence FS-N41C Keyence

$290.87

In stock, 32 units

Specifications

Model		FS-N41C^*1
Type		M8 Connector^*2
Main unit/expansion unit		Main unit
Response time		23 µs (S-HSPD^3) /50 µs (HSPD^4) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) /64 ms (TERA)
Number of control outputs		2^*5
Number of external inputs		1^*5
Light source LED		Transmitter side: Red, four-element LED (wavelength: 660 nm)
Control output		Open-collector, 30 V or less 100 mA or less per output, 100 mA or less total for 2 outputs (when used as a solitary unit) /20 mA or less (when used as an expansion unit) Residual voltage NPN 1.4 V or less (output current: 10 mA or less) /2 V or less (output current: 10 to 100 mA) PNP 1.6 V or less (output current: 10 mA or less) /2.2 V or less (output current: 10 to 100 mA)
External input		Input time: 2 ms (ON) /20 ms (OFF) or longer^*6
Protection circuit		Protection against reverse power connection, output overcurrent, output surge, and reverse output connection
Mutual interference prevention		S-HSPD/HSPD: 0 units, FINE: 4 units, TURBO/SUPER/ULTRA/MEGA/TERA: 8 units (The mutual interference prevention values are twice those shown here when Double is set.)
Power supply	Power voltage	10 to 30 VDC (including 10 % ripple (P-P) or less) , class 2 or LPS^*7
	Power consumption	During normal operation: 910 mW or less (36 mA or less at 24 V/65 mA or less at 12 V) ECO ON: 840 mW or less (33 mA or less at 24 V/60 mA or less at 12 V) ECO FULL: 750 mW or less (30 mA or less at 24 V/52 mA or less at 12 V)^*8
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lx or less, sunlight: 30,000 lx or less
	Ambient temperature	-20 °C -4 °F to +55 °C +131 °F (no freezing)^*9
	Vibration resistance	10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes
	Shock resistance	500 m/s²; 3 times each for X, Y, and Z axes
Case material		Main unit and cover: polycarbonate
Weight		Approx. 25 g
^1 IO-Link Specifi cation V.1.1/COM2 (38.4 kbps) is supported. ^2 Ensure the cable length is 30 m 98.4" or less for the M8 connector type. Ensure the cable length is 20 meters 65.6' or less when connecting by way of IO-Link. ^3 Restrictions when S-HSPD is selected Output 2 of dual output types is fixed to OFF. IO-Link communication cannot be used. Area detection, Area % Mode, DATUM, Rising edge, and Falling edge cannot be selected for Detection Mode. Output timer, Limit Detection, and Display Gain cannot be used. FULL cannot be selected for the ECO function. ^4 Restrictions when HSPD is selected Display Gain cannot be used. ^5 Output 2 and the external input are selectable. ^6 The input time becomes 25 ms (ON)/25 ms (OFF) when external calibration input is selected. ^7 When expanding the system to 9 or more units, use a power supply voltage of 12 V or higher. ^8 The load current is excluded. The power consumption including the load when the maximum number of units are connected is 38 W max. ^*9 When expanded by 1 to 2 units: -20°C -4°F to +55°C +131°F. When expanded by 3 to 10 units: -20°C -4°F to +50°C +122°F. When expanded by 11 to 16 units: -20°C -4°F to +45°C +113°F. When using 2 outputs, 1 unit is counted as 2 units. The prescribed values for the ambient temperature assume that the sensor amplifi er has been mounted on a DIN rail installed on a metal surface. Exercise special care when installing the product in an airtight space.

Omron R7D-AP08H Omron

$1,160.35

Only 7 units left

SERVO DRIVE, 750 W, PULSE INPUT, 240 VAC, SINGLE PHASE

Omron NJ-PD3001 Omron

$227.57

Only 7 units left

DIN Rail Power Supplies Sysmac NJ Power Supply DC

Omron NX-EC0142 Omron

$319.04

Only 8 units left

Controllers NX 1Pt Inc Enc 5V PNP

Keyence LR-ZB250CP Keyence

$305.76

In stock, 11 units

Specifications

Model		LR-ZB250CP
Type		Distance based laser sensor
Appearance		Rectangular
Output		PNP
Cable connection		M8 connector, 4-pin
Detectable distance		35 to 250 mm 1.38" to 9.84" (215 to 0)^*1
Standard detectable deviation		35 to 180 mm 1.38" to 7.09": 9 mm 0.35" 180 to 250 mm 7.09" to 9.84": 25 mm 0.98"
Display resolution		1 to 3 (1 to 3 mm 0.04" to 0.12")
Spot size		Approx. 2.4 × 1.2 mm 0.09" × 0.05" at 250 mm 9.84"
Response time		1.5 ms / 10 ms / 50 ms selectable
Light source	Type	Red laser (660 nm)
	Laser class	Class 1 laser product (IEC60825-1, FDA (CDRH) Part1040.10^*2)
Function	Indicator	3-digit 7-segment display (red), output indicator (yellow), DATUM indicator (orange), 1 spot indicator (green)
	Timer	OFF/ON delay/OFF delay/One-shot
Specifications	Power voltage	10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
	Power consumption	450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)
	Control output	PNP Open collector, Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mA
	Protection circuit	Protection against reverse power connection, output overcurrent, output surge, reverse output connection
	Output operation	Light-ON / Dark-ON selectable
	External input	Input time calibration: 35 ms or more ON, 35 ms or more OFF Laser emission stop: 2 ms or more ON, 20 ms or more OFF Short-circuit current NPN: 1 mA or less/PNP: 2 mA or less
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB^3, Diversey^3
	Insulation resistance	20 MΩ or more (500 VDC)
	Ambient light	Incandescent lamp: 2,000 lux or less Sunlight: 4,000 lux or less^*4
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F (No freezing)
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKM
Accompanying items		Instruction Manual, Certification/Identification label (FDA)
Weight		Approx. 55 g
^1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed. ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 Have passed resistance tests with cleaning agents from multiple manufactures. ^4 When the response time is 10 ms

Sick MICS3-AAAZ40AZ1P01 MS3 CORE IO 4M Sick

$3,473.08

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Sick KTX-WP91141252ZZZZ Sick

$883.34

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Omron C200HW-PRM21 Omron

$4,728.60

Only 2 units left

COMMUNICATIONS INTERFACE MODULE, PROFIBUS DP MASTER,ALPHA,CS1,CONTROLLERS, C50084VSW

Omron E3JM-R4M4T-G Omron

$113.24

Only 7 units left

Photoelectric sensor retro-reflective 4m AC/DC relay timer 5s

Keyence FU-13 Keyence

$237.99

Only 8 units left

Specifications

Model		FU-13^*1
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø1.0×2
Minimum bend radius		R2 mm0.079" Tough-Flex
Environmental resistance	Ambient temperature	-40 to +50 °C -40 to 122 °F
Weight		Approx. 8 g
^*1 For details on the detecting distance, see the fiber amplifier catalog.

Omron NJ-PA3001 Omron

$204.71

Only 9 units left

Rack Mount Power Supplies Sysmac NJ Power Supply AC

Sick KT5W-2N1116 CONTRASTSENSOR Sick

$421.98

In stock, 13 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.