Measurement Sensors

Filters

In stock (381)
Out of stock (662)

Showing 145 - 168 of 719 products

$873.26

Only 2 units left

Specifications

Model				LK-H2^*1
Operating System				Windows 11 Pro Windows 10 ^2 Windows 7 (SP1 or later)^3 Windows Vista (SP2 or later)^4 Windows XP (SP3 or later)^5
CPU				Pentium III 1 GHz or higher (1.7 GHz or higher recommended)
Memory capacity				256 MB or more (1 GB or more recommended)
Available hard disk space				1 GB
Display				1024 x 768 pixels, 24-bit full color or better
PC interface				The PC must be equipped with one of these interfaces: USB: Revision 2.0 HighSpeed (USB1.1 compatible full speed)^6 LAN: 100BASE-TX, 10BASE-T^7 RS-232C (serial port)
^1 Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. Pentium is a registered trademark of Intel Corporation. ^2 Compatible with each edition of Home, Pro, and Enterprise. ^3 Compatible with each edition of Home Premium, Professional and Ultimate. ^4 Editions supported: Ultimate, Business, Home Premium, Home Basic. ^5 Supports Professional and Home Edition. ^6 Does not support connection via a USB hub. ^*7 Does not support connection via private LANs or routers. Use in a 1:1 or local connection.

Keyence LK-DN100 Keyence

$540.75

Only 2 units left

Specifications

Model		LK-DN100
Type		DeviceNet® communication unit dedicated to LK-G5000 Series
Network connection	Master unit	ODVA-certified master unit
	Maximum trunk line cable length	Thick cable: 500 m 1640.4' (at transmission speed of 125 kbps)/250 m 820.21' (at 250 kbps)/ 125 m 410.11' (at 500 kbps) Thin cable: 100 m 328.08' (at all transmission speed settings)
	Communication protocol	DeviceNet®^*1 compliant
	Transmission speed	500 kbps, 250 kbps, 125 kbps
	Device type	Generic
	Transmission medium	Dedicated 5 cables (2 signal cables, 2 power supply cables, 1 shielding cable)
	Communication type	I/O communication (Poll) Explicit message communication
	Power supply	11 to 25 VDC
	Current consumption	10 mA max. (when network power supply 24 V is applied)
Power supply	Power supply voltage	24 VDC ±10% (supplied from controller)
	Maximum current consumption	200mA or less
Environmental resistance	Ambient temperature	When one or less head expansion unit is connected: 0 to +50 °C 32 to 122 °F. When two or more head expansion units are connected: 0 to +40 °C 32 to 104 °F.
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 300 g
^*1 DeviceNet® is a registered trademark of ODVA (Open DeviceNet® Vendor Association).

Keyence LK-CC100 Keyence

$2,416.16

Only 1 unit left

Specifications

Model		LK-CC100
Type		CC-Link communication unit dedicated to LK-G5000 Series
Network connection	Supported CCLink version	Ver. 1.10 (Extended cyclic setting: Single) Ver. 2.00 (Extended cyclic setting: Double or more)^1^2
	Master unit	CLPA-certified master unit (CC-Link Ver. 2.00/Ver. 1.10)
	No. of occupied stations	1 to 4
	Communication speed	156kbps、625kbps、2.5Mbps、5Mbps、10Mbps
	Connection cable	Dedicated CC-Link cable supporting Ver. 1.10 (Shielded 3-core twisted-pair cable: OP-79426, OP-79427)
	Maximum total cable extension length	156kbps…1200m、 625kbps…900m、 2.5Mbps…400m、 5Mbps…160m、 10Mbps…100m
	Station type	Remote device station
Power supply	Power supply voltage	24 VDC ±10 % (supplied from controller)
	Maximum current consumption	200mA or less
Environmental resistance	Ambient temperature	When one or less head expansion unit is connected: 0 to +50 °C 32 to 122 °F. When two or more head expansion units are connected: 0 to +40 °C 32 to 104 °F.
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 300 g
^1 The LK-G5000 Series supports the "extended cyclic transmission" and "station-to-station cable length relaxation" of CC-Link Ver. 2.00. ^2 CC-Link is a registered trademark of Mitsubishi Electric Corporation.

Keyence LK-HA100 Keyence

$495.53

Only 7 units left

Specifications

Model		LK-HA100
Separate type
Type		Head expansion unit
Sensor head compatibility		Compatible
No. of connectable sensor heads		1
Display interface	LED indicator	POWER ON, STABILITY, BRIGHT, DARK
Terminal block	Analog output voltage	±10 V output, Output impedance: 100 Ω
	Analog current output	4 to 20 mA, Maximum load resistance: 350 Ω
	No. of analog outputs	1
PLC-Link		The following PLCs are supported:Mitsubishi Electric: MELSEC iQ-R Series, iQ-F Series, Q Series, L Series, FX Series EtherNet/IP™, CC-Link, and DeviceNet® cannot be used in conjunction with PLC-Link
Head expansion unit connector		Up to 10 head expansion units can be connected to one main controller
Power supply	Power supply voltage	24 VDC ±10 % (Supplied from the controller)
	Maximum current consumption	0.6 A or less with 1 head/3.5 A or less with 12 heads
Environmental resistance	Ambient temperature	When one or less head expansion unit is connected: 0 to +50 °C 32 to 122 °F. When two or more head expansion units are connected: 0 to +40 °C 32 to 104 °F.
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 300 g

Keyence LK-HD1001 Keyence

$1,087.50

Only 1 unit left

Specifications

Model		LK-HD1001
Type		LK-G5000 Series Touch Panel Display
Display panel	Display color	TFT color LCD
		32,768 colors
	Pixels	W 640 × H 480 pixels
	Display area	W 170.9 × H 128.2 mm W 6.73' × H 5.04'
Displaypanel	Service life (normal temperature andhumidity)	Approx 50,000 hours
Backlight	Method	White LED
	Duration	Approx 50,000 hours
Touch switch	Number of switches	40 × 30 per 1 image
Touchswitch	Method	Matrix resistance membrane mode
	Operating force	0.98N or less
	Life-span	More than one million times
Communication function		Available only with the LK-G5000 Series
Structure		Panel built-in type, IP65f equivalent dust-proof, waterjet-proof on only front panel
Power supply	Power supply voltage	24 VDC ±10%
	Maximum current consumption	1 A or less
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)^*1
	Storage temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Storage relative humidity	35 to 85 % RH (No condensation)^*1
	Operating environment	No dust or corrosive gas
	Vibration resistance	10 to 57 Hz, Double amplitude 0.3 mm 0.01"; 57 to 500 Hz, 2 G for 3 hours in each of the X, Y, and Z directions
Weight		Approx. 1,150 g
^*1 When the ambient temperature is higher than 40 °C 104 °F, limit the absolute humidity to 85 % RH at 40 °C 104 °F.

Keyence LK-H157 Keyence

$3,823.69

In stock, 11 units

Specifications

Model		LK-H157
Mounting mode		Diffuse reflective / Specular reflective^*1
Reference distance		Diffuse reflective: 150 mm 5.91" Specular reflective: 147.5 mm 5.81"
Measuring range		Diffuse reflective: ±40 mm ±1.57" Specular reflective: -39.5 mm to +24.4 mm -1.56" to +0.96"^*2
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 2 FDA(CDRH)21CFR Part 1040.10: Class II
	Output	0.95mW
Spot diameter (at standard distance)		120 µm x 4,200 µm
Linearity		±0.02% of F.S. (F.S.= 80 mm 3.15")^*3
Repeatability		0.25 µm^*4
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S. (F.S.= 80 mm 3.15")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 5,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F^*5
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 300 g
^1 Use one of the following dark filters when measuring a transparent or mirror surface object: LK-H082/LK-H087: LK-F3, LK-H152/LK-H157: LK-F2 ^2 Measurement range when the sampling cycle is 20 µs or more. ^3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^4 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs. ^*5 When the ambient temperature rises to 40 °C 104 °F or more, mount this on a metal plate before use.

Keyence LK-H155 Keyence

$3,823.69

Only 5 units left

Specifications

Model		LK-H155
Mounting mode		Diffuse reflective
Reference distance		150 mm5.906"
Measuring range		±40 mm ±1.57"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 3R FDA(CDRH)21CFR Part 1040.10: Class IIIa
	Output	4.8mW
Spot diameter (at standard distance)		120 µm x 4,200 µm
Linearity		±0.02% of F.S. (F.S.= 80 mm 3.15")^*2
Repeatability		0.25 µm^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S./°C (F.S.= 80 mm 3.15")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 300 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs. ^4 When the ambient temperature rises to 40 °C 104 °F or more, mount this on a metal plate before use.

Keyence LK-H150 Keyence

$3,823.69

Only 8 units left

Specifications

Model		LK-H150
Mounting mode		Diffuse reflective
Reference distance		150 mm5.906"
Measuring range		±40 mm ±1.57"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 3R FDA(CDRH)21CFR Part 1040.10: Class IIIa
	Output	4.8mW
Spot diameter (at standard distance)		ø120 µm
Linearity		±0.02% of F.S. (F.S.= 80 mm 3.15")^*2
Repeatability		0.25 µm^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S./°C (F.S.= 80 mm 3.15")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 300 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs. ^4 When the ambient temperature rises to 40 °C 104 °F or more, mount this on a metal plate before use.

Keyence LK-H087 Keyence

$2,860.95

Only 8 units left

Specifications

Model		LK-H087
Mounting mode		Diffuse reflective / Specular reflective^*1
Reference distance		Diffuse reflective: 80 mm 3.15" Specular reflective: 76.7 mm 3.02"
Measuring range		Diffuse reflective: ±18 mm ±0.71" Specular reflective: -17.6 mm to +14.5 mm -0.69" to +0.57"^*2
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 2 FDA(CDRH)21CFR Part 1040.10: Class II
	Output	0.95mW
Spot diameter (at standard distance)		70 µm x 2,500 µm
Linearity		±0.02% of F.S. (F.S.= 36 mm 1.42")^*3
Repeatability		0.1 µm^*4
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S. (F.S.= 36 mm 1.42")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F^*5
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 280 g
^1 Use one of the following dark filters when measuring a transparent or mirror surface object: LK-H082/LK-H087: LK-F3, LK-H152/LK-H157: LK-F2 ^2 Measurement range when the sampling cycle is 20 µs or more. ^3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^4 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs. ^*5 When the ambient temperature rises to 40 °C 104 °F or more, mount this on a metal plate before use.

Keyence LK-H085 Keyence

$2,720.04

Only 10 units left

Specifications

Model		LK-H085
Mounting mode		Diffuse reflective
Reference distance		80 mm 3.15"
Measuring range		±18 mm ±0.71"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 3R FDA(CDRH)21CFR Part 1040.10: Class IIIa
	Output	4.8mW
Spot diameter (at standard distance)		70 µm x 2,500 µm
Linearity		±0.02% of F.S. (F.S.= 36 mm 1.42")^*2
Repeatability		0.1 µm^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S./°C (F.S.= 36 mm 1.42")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 280 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs. ^4 When the ambient temperature rises to 40 °C 104 °F or more, mount this on a metal plate before use.

Keyence LK-H082 Keyence

$2,277.91

In stock, 12 units

Specifications

Model		LK-H082
Mounting mode		Diffuse reflective / Specular reflective^*1
Reference distance		Diffuse reflective: 80 mm 3.15" Specular reflective: 76.7 mm 3.02"
Measuring range		Diffuse reflective: ±18 mm ±0.71" Specular reflective: -17.6 mm to +14.5 mm -0.69" to +0.57"^*2
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 2 FDA(CDRH)21CFR Part 1040.10: Class II
	Output	0.95mW
Spot diameter (at standard distance)		ø70 µm
Linearity		±0.02% of F.S. (F.S.= 36 mm 1.42")^*3
Repeatability		0.1 µm^*4
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S. (F.S.= 36 mm 1.42")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F^*5
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 280 g
^1 Use one of the following dark filters when measuring a transparent or mirror surface object: LK-H082/LK-H087: LK-F3, LK-H152/LK-H157: LK-F2 ^2 Measurement range when the sampling cycle is 20 µs or more. ^3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^4 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs. ^*5 When the ambient temperature rises to 40 °C 104 °F or more, mount this on a metal plate before use.

Keyence LK-H080 Keyence

$2,062.71

Only 9 units left

Specifications

Model		LK-H080
Mounting mode		Diffuse reflective
Reference distance		80 mm 3.15"
Measuring range		±18 mm ±0.71"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 3R FDA(CDRH)21CFR Part 1040.10: Class IIIa
	Output	4.8mW
Spot diameter (at standard distance)		ø70 µm
Linearity		±0.02% of F.S. (F.S.= 36 mm 1.42")^*2
Repeatability		0.1 µm^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S./°C (F.S.= 36 mm 1.42")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 280 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs. ^4 When the ambient temperature rises to 40 °C 104 °F or more, mount this on a metal plate before use.

Keyence LK-H057K Keyence

$2,507.38

In stock, 15 units

Specifications

Model		LK-H057K
Mounting mode		Specular reflective
Reference distance		46.3 mm1.823"
Measuring range		±5.2 mm ±0.20"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 2 FDA(CDRH)21CFR Part 1040.10: Class II
	Output	0.95mW
Spot diameter (at standard distance)		50 µm x 2,000 µm
Linearity		±0.02% of F.S. (F.S.= 20 mm 0.79")^*2
Repeatability		0.025 µm^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S. (F.S.= 20 mm 0.79")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 260 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^*3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs.

Keyence LK-H057 Keyence

$2,507.38

In stock, 15 units

Specifications

Model		LK-H057
Mounting mode		Diffuse reflective
Reference distance		50 mm 1.97"
Measuring range		±10 mm ±0.39"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 2 FDA(CDRH)21CFR Part 1040.10: Class II
	Output	0.95mW
Spot diameter (at standard distance)		50 µm x 2,000 µm
Linearity		±0.02% of F.S. (F.S.= 20 mm 0.79")^*2
Repeatability		0.025 µm^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S./°C (F.S.= 20 mm 0.79")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 260 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^*3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs.

Keyence LK-H055 Keyence

$2,507.38

Only 6 units left

Specifications

Model		LK-H055
Mounting mode		Diffuse reflective
Reference distance		50 mm 1.97"
Measuring range		±10 mm ±0.39"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 3R FDA(CDRH)21CFR Part 1040.10: Class IIIa
	Output	4.8mW
Spot diameter (at standard distance)		50 µm x 2,000 µm
Linearity		±0.02% of F.S. (F.S.= 20 mm 0.79")^*2
Repeatability		0.025 µm^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S./°C (F.S.= 20 mm 0.79")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 260 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^*3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs.

Keyence LK-H052K Keyence

$2,888.41

Only 8 units left

Specifications

Model		LK-H052K
Mounting mode		Specular reflective
Reference distance		46.3 mm1.823"
Measuring range		±5.2 mm ±0.20"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 2 FDA(CDRH)21CFR Part 1040.10: Class II
	Output	0.95mW
Spot diameter (at standard distance)		ø50 µm
Linearity		±0.02% of F.S. (F.S.= 20 mm 0.79")^*2
Repeatability		0.025 µm^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S. (F.S.= 20 mm 0.79")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 260 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^*3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs.

Keyence LK-H052 Keyence

$2,888.41

Only 9 units left

Specifications

Model		LK-H052
Mounting mode		Diffuse reflective
Reference distance		50 mm 1.97"
Measuring range		±10 mm ±0.39"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 2 FDA(CDRH)21CFR Part 1040.10: Class II
	Output	0.95mW
Spot diameter (at standard distance)		ø50 µm
Linearity		±0.02% of F.S. (F.S.= 20 mm 0.79")^*2
Repeatability		0.025 µm^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S./°C (F.S.= 20 mm 0.79")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 260 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs. ^4 When the ambient temperature rises to 40 °C 104 °F or more, mount this on a metal plate before use.

Keyence LK-H027K Keyence

$2,507.38

Only 7 units left

Specifications

Model		LK-H027K
Mounting mode		Specular reflective
Reference distance		16.1mm0.634"
Measuring range		±2.8 mm ±0.11"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 2 FDA(CDRH)21CFR Part 1040.10: Class II
	Output	0.95mW
Spot diameter (at standard distance)		25 µm x 1,400 µm
Linearity		±0.02% of F.S. (F.S.= 6 mm 0.24")^*2
Repeatability		0.02 µm (0.01 µm)^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S./°C (F.S.= 6 mm 0.24")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 230 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^*3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs.

Keyence LK-H027 Keyence

$2,507.38

In stock, 12 units

Specifications

Model		LK-H027
Mounting mode		Diffuse reflective
Reference distance		20mm0.787"
Measuring range		±3 mm ±0.12"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 2 FDA(CDRH)21CFR Part 1040.10: Class II
	Output	0.95mW
Spot diameter (at standard distance)		25 µm x 1,400 µm
Linearity		±0.02%of F.S. (F.S.= 6 mm 0.24")^*2
Repeatability		0.02 µm (0.01 µm)^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S./°C (F.S.= 6 mm 0.24")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 230 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^*3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs.

Keyence LK-H025 Keyence

$2,507.38

Only 3 units left

Specifications

Model		LK-H025
Mounting mode		Diffuse reflective
Reference distance		20mm0.787"
Measuring range		±3 mm ±0.12"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 3R FDA(CDRH)21CFR Part 1040.10: Class IIIa
	Output	4.8mW
Spot diameter (at standard distance)		25 µm x 1,400 µm
Linearity		±0.02%of F.S. (F.S.= 6 mm 0.24")^*2
Repeatability		0.02 µm (0.01 µm)^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S./°C (F.S.= 6 mm 0.24")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 230 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^*3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs.

Keyence LK-H022K Keyence

$7,201.45

Only 5 units left

Specifications

Model		LK-H022K
Mounting mode		Specular reflective
Reference distance		16.1mm0.634"
Measuring range		±2.8 mm ±0.11"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 2 FDA(CDRH)21CFR Part 1040.10: Class II
	Output	0.95mW
Spot diameter (at standard distance)		ø25 µm
Linearity		±0.02% of F.S. (F.S.= 6 mm 0.24")^*2
Repeatability		0.02 µm (0.01 µm)^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S./°C (F.S.= 6 mm 0.24")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 230 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^*3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs.

Keyence LK-H022 Keyence

$2,888.41

Only 5 units left

Specifications

Model		LK-H022
Mounting mode		Diffuse reflective
Reference distance		20mm0.787"
Measuring range		±3 mm ±0.12"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 2 FDA(CDRH)21CFR Part 1040.10: Class II
	Output	0.95mW
Spot diameter (at standard distance)		ø25 µm
Linearity		±0.02% of F.S. (F.S.= 6 mm 0.24")^*2
Repeatability		0.02 µm (0.01 µm)^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S./°C (F.S.= 6 mm 0.24")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 230 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs. ^4 When the ambient temperature rises to 40 °C 104 °F or more, mount this on a metal plate before use.

Keyence LK-H020 Keyence

$2,761.41

Only 8 units left

Specifications

Model		LK-H020
Mounting mode		Diffuse reflective
Reference distance		20mm0.787"
Measuring range		±3 mm ±0.12"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 3R FDA(CDRH)21CFR Part 1040.10: Class IIIa
	Output	4.8mW
Spot diameter (at standard distance)		ø25 µm
Linearity		±0.02% of F.S. (F.S.= 6 mm 0.24")^*2
Repeatability		0.02 µm (0.01 µm)^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S./°C (F.S.= 6 mm 0.24")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 230 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs. ^4 When the ambient temperature rises to 40 °C 104 °F or more, mount this on a metal plate before use.

Keyence LK-H008W Keyence

$1,745.35

Only 5 units left

Specifications

Model		LK-H008W
Mounting mode		Specular reflective
Reference distance		8 mm0.315"
Measuring range		±0.5 mm ±0.02"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 1 FDA(CDRH)21CFR Part 1040.10: Class II
	Output	0.3mW
Spot diameter (at standard distance)		20 µm x 550 µm
Linearity		±0.05% of F.S. (F.S.= 1 mm 0.04")^*2
Repeatability		0.005 µm (0.001 µm)^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.02% of F.S./°C (F.S.=1 mm 0.04")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 240 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs. ^4 When the ambient temperature rises to 40 °C 104 °F or more, mount this on a metal plate before use.

Previous Page 7 / 30Next

Filters

In stock (381)
Out of stock (662)