Measurement Sensors

Filters

In stock (381)
Out of stock (662)

Showing 121 - 144 of 719 products

$1,491.33

In stock, 67 units

Specifications

Model		LK-G30
Reference distance		30 mm 1.18"(Diffuse reflection), 23.5 mm 0.93"(Specular reflection)
Measuring range		±5 mm ±0.2"(Diffuse reflection),±4.5 mm ±0.18"(Specular reflection)
Light source	Type	Red semiconductor laser
	Wavelength	655nm (Visible light), Class 3R laser product (JIS C6802)
	Laser Class	Class 3R (IEC 60825-1), Class IIIa (FDA CDRH Part 1040.10)
	Output	4.8 mW
Spot diameter (at reference distance)		Approx. ø30 µm ø0.001181"
Linearity		±0.05% of F.S. (F.S.= ±5 mm ±0.2")^*1
Repeatability		0.05 µm (0.01 µm)^*2
Sampling frequency		20/50/100/200/500/1,000 µs (Selectable from 6 levels)
LED display		Near the center of the measurement: Green lights Within the measurement area: Orange lights Outside the measurement area: Orange flashing
Temperature characteristics		0.01% of F.S./°C (F.S.= ±5 mm ±0.2")
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient light	Incandescent lamp or Fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 280 g (including the cable)
^1 This value was taken when measuring a KEYENCE standard target (ceramic) in standard mode. ^2 These values were taken when measuring a KEYENCE standard target (SUS) at a reference distance and with the number of averaging measurements set to 4,096

Keyence LK-G157 Keyence

$2,583.60

In stock, 63 units

Specifications

Model		LK-G157
Reference distance		Diffused reflection: 150 mm 5.91", Specular reflection: 147.5 mm 5.81" (Specular reflection)
Measuring range		Diffused reflection: ±40 mm ±1.57", Specular reflection: ±39 mm ±1.54"^1^2
Light source	Type	Red semiconductor laser
	Wavelength	655 nm (visible light)
	Laser Class	Class II (FDA CDRH 21CFR PART1040.10)
	Output	0.95 mW
Spot diameter (at reference distance)		Approx. 120 x 1,700 µm 0.0047" x 0.0669"
Linearity		±0.05 % of F.S. (F.S.= ±40 mm ±1.57")^*3
Repeatability		0.5 µm 0.000020"^*4
Sampling frequency		20 / 50 / 100 / 200 / 500 / 1,000 µs (Selectable from 6 levels)
LED display		Near the center of the measurement: Green lights Within the measurement area: Orange lights Outside the measurement area: Orange flashing
Temperature characteristics		0.01 % of F.S./°C (F.S.= ±40 mm ±1.57")
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient light	Incandescent lamp or Fluorescent lamp: 5,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 290 g (including the cable)
^1 The range is obtained by measuring KEYENCE's standard target (ceramic). ^2 When the sampling rate is 20 µs, the range becomes -9 -0.35" (NEAR side) to -15 mm -0.59" (NEAR side) for Diffused reflection, and -8.7 -0.34" (NEAR side) to -14 mm -0.55" (NEAR side) for specular reflection. ^3 The range is obtained by measuring KEYENCE's standard target (ceramic) with the Standard mode. ^4 The range is obtained by measuring KEYENCE's standard (SUS) with 4,096 times of averaging at the reference distance.

Keyence LK-G155 Keyence

$2,583.60

In stock, 47 units

Specifications

Model		LK-G155
Reference distance		150 mm 5.91" (Diffuse reflection),147.5 mm 5.81" (Specular reflection)
Measuring range		±40 mm ±1.57" (Diffuse reflection), ±39 mm ±1.54" (Specular reflection)
Light source	Type	Red semiconductor laser
	Wavelength	655nm (Visible light), Class 3R laser product (JIS C6802)
	Laser Class	Class 3R (IEC 60825-1), Class IIIa (FDA CDRH Part 1040.10)
	Output	4.8 mW maximum
Spot diameter (at reference distance)		Approx. 120 x 1700 µm 0.0047 x 0.0669"
Linearity		±0.05% of F.S. (F.S.= ±40 mm ±1.57")^*1
Repeatability		0.5 µm 0.000020"^*2
Sampling frequency		20/50/100/200/500/1,000 µs (Selectable from 6 levels)
LED display		Near the center of the measurement: Green lights Within the measurement area: Orange lights Outside the measurement area: Orange flashing
Temperature characteristics		0.01% of F.S./°C (F.S.= ±40 mm ±1.57")
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient light	Incandescent lamp or Fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 290 g (including the cable)
^1 This value was taken when measuring a KEYENCE standard target (ceramic) in standard mode. ^2 These values were taken when measuring a KEYENCE standard target (SUS) at a reference distance and with the number of averaging measurements set to 4,096

Keyence LK-G152 Keyence

$2,507.38

In stock, 68 units

Specifications

Model		LK-G152
Reference distance		Diffused reflection: 150 mm 5.91", Specular reflection: 147.5 mm 5.81" (Specular reflection)
Measuring range		Diffused reflection: ±40 mm ±1.57", Specular reflection: ±39 mm ±1.54"^1^2
Light source	Type	Red semiconductor laser
	Wavelength	655 nm (visible light)
	Laser Class	Class II (FDA CDRH 21CFR PART1040.10)
	Output	0.95 mW
Spot diameter (at reference distance)		Approx. ø120 µm ø0.0047"
Linearity		±0.05 % of F.S. (F.S.= ±40 mm ±1.57")^*3
Repeatability		0.5 µm 0.000020"^*4
Sampling frequency		20 / 50 / 100 / 200 / 500 / 1,000 µs (Selectable from 6 levels)
LED display		Near the center of the measurement: Green lights Within the measurement area: Orange lights Outside the measurement area: Orange flashing
Temperature characteristics		0.01 % of F.S./°C (F.S.= ±40 mm ±1.57")
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient light	Incandescent lamp or Fluorescent lamp: 5,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 290 g (including the cable)
^1 The range is obtained by measuring KEYENCE's standard target (ceramic). ^2 When the sampling rate is 20 µs, the range becomes -9 -0.35" (NEAR side) to -15 mm -0.59" (NEAR side) for Diffused reflection, and -8.7 -0.34" (NEAR side) to -14 mm -0.55" (NEAR side) for specular reflection. ^3 The range is obtained by measuring KEYENCE's standard target (ceramic) with the Standard mode. ^4 The range is obtained by measuring KEYENCE's standard (SUS) with 4,096 times of averaging at the reference distance.

Keyence LK-G150 Keyence

$2,507.38

In stock, 68 units

Specifications

Model		LK-G150
Reference distance		150 mm 5.91" (Diffuse reflection),147.5 mm 5.81" (Specular reflection)
Measuring range		±40 mm ±1.57" (Diffuse reflection), ±39 mm ±1.54" (Specular reflection)
Light source	Type	Red semiconductor laser
	Wavelength	655nm (Visible light), Class 3R laser product (JIS C6802)
	Laser Class	Class 3R (IEC 60825-1), Class IIIa (FDA CDRH Part 1040.10)
	Output	4.8 mW maximum
Spot diameter (at reference distance)		Approx. ø120 µm ø0.004724"
Linearity		±0.05% of F.S. (F.S.= ±40 mm ±1.57")^*1
Repeatability		0.5 µm 0.000020"^*2
Sampling frequency		20/50/100/200/500/1,000 µs (Selectable from 6 levels)
LED display		Near the center of the measurement: Green lights Within the measurement area: Orange lights Outside the measurement area: Orange flashing
Temperature characteristics		0.01% of F.S./°C (F.S.= ±40 mm ±1.57")
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient light	Incandescent lamp or Fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 290 g (including the cable)
^1 This value was taken when measuring a KEYENCE standard target (ceramic) in standard mode. ^2 These values were taken when measuring a KEYENCE standard target (SUS) at a reference distance and with the number of averaging measurements set to 4,096

Keyence LK-G15 Keyence

$1,017.21

In stock, 45 units

Specifications

Model		LK-G15
Reference distance		10 mm 0.39"
Measuring range		±1 mm ±0.04"^1^2
Light source	Type	Red semiconductor laser
	Wavelength	655 nm (visible light)
	Laser Class	Class II (FDA CDRH 21CFR PART1040.10)
	Output	0.3 mW
Spot diameter (at reference distance)		Approx. 20 x 500 µm 0.0008" x 0.0197"
Linearity		±0.03 % of F.S. (F.S.= ±1 mm ±0.04")^*3
Repeatability		0.02 µm (0.01 µm)^*4
Sampling frequency		20 / 50 / 100 / 200 / 500 / 1,000 µs (Selectable from 6 levels)
LED display		Near the center of the measurement: Green lights Within the measurement area: Orange lights Outside the measurement area: Orange flashing
Temperature characteristics		0.01 % of F.S./°C (F.S.= ±1 mm ±0.04")
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient light	Incandescent lamp or Fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 190 g (including the cable)
^1 The range is obtained by measuring KEYENCE's standard target (ceramic). ^2 When the sampling rate is 20 µs, the range becomes +0.37 mm +0.01" (FAR side) to -1 mm -0.04" (NEAR side). ^3 The range is obtained by measuring KEYENCE's standard target (ceramic) with the Standard mode. ^4 The range is obtained by measuring KEYENCE's standard (SUS) with 4,096 times of averaging at the reference distance. The range in parenthesis is the typical linearity obtained by measuring the target with 16, 384.

Keyence LK-G10 Keyence

$1,017.21

In stock, 45 units

Specifications

Model		LK-G10
Reference distance		10 mm 0.39"
Measuring range		±1 mm ±0.04"^1^2
Light source	Type	Red semiconductor laser
	Wavelength	655 nm (visible light)
	Laser Class	Class II (FDA CDRH 21CFR PART1040.10)
	Output	0.3 mW
Spot diameter (at reference distance)		Approx. ø20 µm ø0.0008"
Linearity		±0.03 % of F.S. (F.S.= ±1 mm ±0.04")^*3
Repeatability		0.02 µm (0.01 µm)^*4
Sampling frequency		20 / 50 / 100 / 200 / 500 / 1,000 µs (Selectable from 6 levels)
LED display		Near the center of the measurement: Green lights Within the measurement area: Orange lights Outside the measurement area: Orange flashing
Temperature characteristics		0.01 % of F.S./°C (F.S.= ±1 mm ±0.04")
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient light	Incandescent lamp or Fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 190 g (including the cable)
^1 The range is obtained by measuring KEYENCE's standard target (ceramic). ^2 When the sampling rate is 20 µs, the range becomes +0.37 mm +0.01" (FAR side) to -1 mm -0.04" (NEAR side). ^3 The range is obtained by measuring KEYENCE's standard target (ceramic) with the Standard mode. ^4 The range is obtained by measuring KEYENCE's standard (SUS) with 4,096 times of averaging at the reference distance. The range in parenthesis is the typical linearity obtained by measuring the target with 16, 384.

Keyence LK-G08 Keyence

$2,393.20

Only 3 units left

Specifications

Model		LK-G08
Reference distance		8 mm 0.32"
Measuring range		±0.8 mm
Light source	Type	Red semiconductor laser
	Wavelength	655nm (Visible light), Class 1 laser product (JIS C6802)
	Output	0.3 mW
Spot diameter (at reference distance)		Approx. ø20 µm ø0.000787"
Linearity		±0.05% of F.S. (F.S. = ±0.8 mm ±0.03")^*1
Repeatability		0.02 µm (0.01 µm)^*2
Sampling frequency		20/50/100/200/500/1,000 µs (Selectable from 6 levels)
LED display		Near the center of the measurement: Green lights Within the measurement area: Orange lights Outside the measurement area: Orange flashing
Temperature characteristics		0.02% of F.S./°C (F.S. = ±0.8 mm 0.031")
Environmental resistance	Enclosure rating	-
	Ambient light	Incandescent lamp or Fluorescent lamp: 10,000 lux max.
	Ambient temperature	+10 to +40 °C 50 to 104 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 0.75 mm 0.03", 2 hours in each of the X, Y, and Z directions
Material		Aluminum
Weight		Approx. 245 g (including the cable)
^1 This value was taken when measuring a KEYENCE standard target (ceramic) in standard mode. ^2 These values were taken when measuring a KEYENCE standard target (SUS) at a reference distance and with the number of averaging measurements set to 4,096

Keyence LK-G3001V Keyence

$1,237.31

In stock, 49 units

Specifications

Model			LK-G3001V^*1
Separate type			LK-G3001/LK-GD500^*2
Type			All-in-one model
Display	Head compatibility		All LK-G sensor heads are compatible
	Number of connectable sensors		Maximum of 2 units
	Minimum display unit		0.01 µm
	Display range		±9,999.99 mm to ±9,999.99 µm (Selectable from six levels)
	Refresh rate		10 times/sec
Terminal block	Analog voltage output		±10 V x 2 outputs, output impedance: 100 Ω
	Analog current output		4 to 20 mA x 2 outputs, maximum load resistance: 350 Ω
	Timing input		For OUT1, non-voltage input
	Reset input
	Auto-zero input
	Laser remote interlock input		Non-voltage input
	Comparator output		For OUT1, NPN open-collector output
	Alarm output		For OUT1, NPN open-collector output (N.C.)
Expansion connector	Timing input		For OUT2, non-voltage input
	Reset input
	Auto-zero input
	Program switching input		Non-voltage input x 3 inputs
	Laser-Off input		For Head A/Head B, non-voltage input
	Comparator output		For OUT2, NPN open-collector output
	Alarm output		For OUT2, NPN open-collector output (N.C.)
	Binary	Binary output	Measured data output (21 bits), OUT1/OUT2 selectable, NPN open-collector output
		Strobe output	NPN open-collector output
		Binary selector output
		Binary selector input	Non-voltage input
RS-232C interface			Measured data output and control input/output (Maximum baud rate: 115,200 bps, selectable)
USB interface			In conformity with USB Revision 2.0 Full speed (USB1.1 compatible)
Major functions			2 OUT simultaneous measurement, Operation, Averaging, Filter, Calibration, Measurement, AUTO ZERO, Sampling frequency setting, Mutual interference prevention, Data storage, 8-program memory, ECO mode, ABLE setting, Target setting, ABLE tuning, Selection of measurement surface of transparent target, Statistics processing, Connection of setting support software, Selectable head-mounting, etc.
Rating	Power voltage		24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption		500 mA or less with 1 head/600 mA or less with 2 heads
Environmental resistance	Ambient temperature		0 to +50 °C 32 to 122 °F
	Relative humidity		35 to 85 % RH (No condensation)
Weight			Approx. 480 g
^1 The rating of the NPN open-collector: 50 mA max. (40 V max.), residual voltage of 1 V max. The rating of non-voltage input: 1 V or less ON voltage, 0.6 mA or less OFF current. ^2 LK-G3001(P) can be operated singly. The measured value display and setting modifications can be performed on the display panel (LK-GD500) or via the setting support software (LK-H1W).

Keyence LK-G3001PV Keyence

$1,364.32

In stock, 32 units

Specifications

Model			LK-G3001PV^*1
Separate type			LK-G3001P/LK-GD500^*2
Type			All-in-one model
Display	Head compatibility		All LK-G sensor heads are compatible
	Number of connectable sensors		Maximum of 2 units
	Minimum display unit		0.01 µm
	Display range		±9,999.99 mm to ±9,999.99 µm (Selectable from six levels)
	Refresh rate		10 times/sec
Terminal block	Analog voltage output		±10 V x 2 outputs, output impedance: 100 Ω
	Analog current output		4 to 20 mA x 2 outputs, maximum load resistance: 350 Ω
	Timing input		For OUT1, voltage input
	Reset input
	Auto-zero input
	Laser remote interlock input		Non-voltage input
	Comparator output		For OUT1, PNP open-collector output
	Alarm output		For OUT1, PNP open-collector output (N.C.)
Expansion connector	Timing input		For OUT2, voltage input
	Reset input
	Auto-zero input
	Program switching input		Voltage input x 3 inputs
	Laser-Off input		For Head A/Head B, voltage input
	Comparator output		For OUT2, PNP open-collector output
	Alarm output		For OUT2, PNP open-collector output (N.C.)
	Binary	Binary output	Measured data output (21 bits), OUT1/OUT2 selectable, PNP open-collector output
		Strobe output	PNP open-collector output
		Binary selector output
		Binary selector input	Voltage input
RS-232C interface			Measured data output and control input/output (Maximum baud rate: 115,200 bps, selectable)
USB interface			In conformity with USB Revision 2.0 Full speed (USB1.1 compatible)
Major functions			2 OUT simultaneous measurement, Operation, Averaging, Filter, Calibration, Measurement, AUTO ZERO, Sampling frequency setting, Mutual interference prevention, Data storage, 8-program memory, ECO mode, ABLE setting, Target setting, ABLE tuning, Selection of measurement surface of transparent target, Statistics processing, Connection of setting support software, Selectable head-mounting, etc.
Rating	Power voltage		24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption		500 mA or less with 1 head/600 mA or less with 2 heads
Environmental resistance	Ambient temperature		0 to +50 °C 32 to 122 °F
	Relative humidity		35 to 85 % RH (No condensation)
Weight			Approx. 480 g
^1 The rating of the PNP open collector: 50 mA max. (30 V max.), residual voltage of 1 V max. The rating of voltage input: 10.2 V or more ON voltage (26.4 V max.) 0.6 mA or less OFF current. ^2 LK-G3001(P) can be operated singly. The measured value display and setting modifications can be performed on the display panel (LK-GD500) or via the setting support software (LK-H1W).

Keyence LK-G3001P Keyence

$1,364.32

In stock, 55 units

Specifications

Model			LK-G3001P^*1
Type			Separate monitor model^*2
Display	Head compatibility		All LK-G sensor heads are compatible
	Number of connectable sensors		Maximum of 2 units
	Minimum display unit		0.01 µm
	Display range		±9,999.99 mm to ±9,999.99 µm (Selectable from six levels)
	Refresh rate		10 times/sec
Terminal block	Analog voltage output		±10 V x 2 outputs, output impedance: 100 Ω
	Analog current output		4 to 20 mA x 2 outputs, maximum load resistance: 350 Ω
	Timing input		For OUT1, voltage input
	Reset input
	Auto-zero input
	Laser remote interlock input		Non-voltage input
	Comparator output		For OUT1, PNP open-collector output
	Alarm output		For OUT1, PNP open-collector output (N.C.)
Expansion connector	Timing input		For OUT2, voltage input
	Reset input
	Auto-zero input
	Program switching input		Voltage input x 3 inputs
	Laser-Off input		For Head A/Head B, voltage input
	Comparator output		For OUT2, PNP open-collector output
	Alarm output		For OUT2, PNP open-collector output (N.C.)
	Binary	Binary output	Measured data output (21 bits), OUT1/OUT2 selectable, PNP open-collector output
		Strobe output	PNP open-collector output
		Binary selector output
		Binary selector input	Voltage input
RS-232C interface			Measured data output and control input/output (Maximum baud rate: 115,200 bps, selectable)
USB interface			In conformity with USB Revision 2.0 Full speed (USB1.1 compatible)
Major functions			2 OUT simultaneous measurement, Operation, Averaging, Filter, Calibration, Measurement, AUTO ZERO, Sampling frequency setting, Mutual interference prevention, Data storage, 8-program memory, ECO mode, ABLE setting, Target setting, ABLE tuning, Selection of measurement surface of transparent target, Statistics processing, Connection of setting support software, Selectable head-mounting, etc.
Rating	Power voltage		24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption		500 mA or less with 1 head/600 mA or less with 2 heads
Environmental resistance	Ambient temperature		0 to +50 °C 32 to 122 °F
	Relative humidity		35 to 85 % RH (No condensation)
Weight			Approx. 370 g
^1 The rating of the PNP open collector: 50 mA max. (30 V max.), residual voltage of 1 V max. The rating of voltage input: 10.2 V or more ON voltage (26.4 V max.) 0.6 mA or less OFF current. ^2 LK-G3001P can be operated singly. The measured value display and setting modifications can be performed on the display panel (LK-GD500) or via the setting support software (LK-H1W).

Keyence OP-86983 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-86982 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-84428 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-84426 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LK-F3 Keyence

$0.00

Sold Out

Specifications

Model				LK-F3
Type				ND Filter
Applicable product				LK-H085/H085
Number included				1
Note				We used when measured with a specular reflection mirror installed. Measurement object is to allow accurate measurement of the glass surface when strong specular gloss and, more to the optimum laser light intensity attenuation.