Measurement Sensors

Filters

In stock (386)
Out of stock (658)

Showing 241 - 264 of 719 products

$8,903.25

Only 1 unit left

Specifications

Model			LJ-X8900
Reference distance			980 mm 38.58"
Measurement range	Z-axis (height)		±400 mm 15.75" (F.S.=800 mm 31.50")
	X-axis (width)	NEAR side	300 mm 11.81"
		Reference distance	510 mm 20.08"
		FAR side	720 mm 28.35"
Light source			Blue semiconductor laser
Light source	Wavelength		405 nm (visible light)
	Laser class		Class 2M laser product (IEC60825-1, FDA (CDRH) Part 1040.10 ^1) ^2
	Output		10 mW
Spot size			Approx. 622 mm × 566 μm 24.49" × 0.0223" (reference distance)
Repeatability	Z-axis (height)		10 μm 0.0004" ^3^4
	X-axis (width)		25 μm 0.0010" ^3^5
Linearity	Z-axis (height)		Near~reference: distance ±0.015% of F.S. (±0.004%) Total range: ±0.05% of F.S. (±0.006%) ^*6
Profile data interval	X-axis (width)		225 μm 0.0089" (100 μm 0.0039"~) ^*7
Profile data count			3200 points
HDR (high dynamic range)			Single-shot HDR ^*8
Laser irradiation position confirmation function	Light source		Blue LED (405 nm)
Temperature characteristic			0.01% of F.S./°C
Environmental resistance	Enclosure rating		IP67 (IEC60529) ^*9
	Ambient light		Incandescent lamp: 10,000 lux or less ^*10
	Ambient temperature		0 to +45°C 32 to +113°F ^*11
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance		10 to 57 Hz, double amplitude 1.5 mm 0.06"; 3 hours each for X, Y, and Z axes
	Shock resistance		15 G / 6 msec
Material			Aluminum
Weight			Approx. 1600 g 3.53 lb
^1 Classification performed based on IEC60825-1 in accordance with FDA (CDRH) Laser Notice. ^2 Do not view the beam directly using optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Observing the laser output using optical instruments is dangerous and may damage the eyes. ^3 Values measured by averaging 4096 times at the reference distance. ^4 The measured target is a KEYENCE standard target. Value when the average height of the default setting area is measured with height and position tools. All other settings are default values. ^5 The measured target is a pin gauge. Value when the point of intersection for the pin gauge rounded surface and edge level is measured using height and position tools. All other settings are default values. ^6 The measured target is a KEYENCE standard target. Profile data when measured by smoothing 64 times and averaging 8 times. All other settings are default values. Values inside parentheses are representative examples of averages for all profile data. ^7 The profile data interval can be changed. If changed, the measurement range in the X direction will also change. ^8 A characteristic that allows for stable, high-precision measurement with a single capture (exposure) at all levels of reflectance, from black (low) to glossy surfaces (high). ^9 The value when a head cable (CB-B) or extension cable (CB-BE) is connected. Does not include CB-BL connection. ^10 When measuring white paper, illuminance on the sensor head receiving surface when light is applied to white paper. ^*11 The head needs to be mounted to a metal plate to be used.

Keyence CL-V020 Keyence

$0.00

Sold Out

Specifications

Model				CL-V020 ^*1
Type				Sensor head (20 mm vacuum and heatresistant model)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.

Keyence LJ-X8400 Keyence

$14,272.94

Only 5 units left

Specifications

Model			LJ-X8400
Reference distance			380 mm 14.96"
Measurement range	Z-axis (height)		±60 mm ±2.36" (+95 to -220 mm +3.74" to -8.66" ^*1) (F.S.=315 mm 12.40")
	X-axis (width)	NEAR side	180 mm 7.09" (163 mm 6.42" ^*1)
		Reference distance	210 mm 8.27"
		FAR side	240 mm 9.45" (320 mm 12.60" ^*1)
Light source			Blue semiconductor laser
Light source	Wavelength		405 nm (visible light)
	Laser class		Class 2M laser product (IEC60825-1, FDA (CDRH) Part 1040.10 ^2) ^3
	Output		10 mW
Spot size			Approx. 275 mm × 249 μm 10.83" × 0.0098" (reference distance)
Repeatability	Z-axis (height)		5 μm 0.000197" ^4^5
	X-axis (width)		10 μm 0.0004" ^4^6
Linearity	Z-axis (height)		Reference distance: ±60 mm ±2.36" ±0.025% of F.S. (±0.003%) Total range: ±0.035% of F.S. (±0.005%) ^*7
Profile data interval	X-axis (width)		75 μm 0.0030" (50 μm 0.0020"~) 100 μm 0.0039" (50 μm 0.0020"~) ^1 ^8
Profile data count			3200 points
HDR (high dynamic range)			Single-shot HDR ^*9
Laser irradiation position confirmation function	Light source		Blue LED (405 nm)
Temperature characteristic			0.01% of F.S./°C
Environmental resistance	Enclosure rating		IP67 (IEC60529) ^*10
	Ambient light		Incandescent lamp: 10,000 lux or less ^*11
	Ambient temperature		0 to +45°C 32 to +113°F ^*12
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance		10 to 57 Hz, double amplitude 1.5 mm 0.06"; 3 hours each for X, Y, and Z axes
	Shock resistance		15 G / 6 msec
Material			Aluminum
Weight			Approx. 1300 g 2.87 lb
^1 When range is extended. ^2 Classification performed based on IEC60825-1 in accordance with FDA (CDRH) Laser Notice. ^3 Do not view the beam directly using optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Observing the laser output using optical instruments is dangerous and may damage the eyes. ^4 Values measured by averaging 4096 times at the reference distance. ^5 The measured target is a KEYENCE standard target. Value when the average height of the default setting area is measured with height and position tools. All other settings are default values. ^6 The measured target is a pin gauge. Value when the point of intersection for the pin gauge rounded surface and edge level is measured using height and position tools. All other settings are default values. ^7 The measured target is a KEYENCE standard target. Profile data when measured by smoothing 64 times and averaging 8 times. All other settings are default values. Values inside parentheses are representative examples of averages for all profile data. ^8 The profile data interval can be changed. If changed, the measurement range in the X direction will also change. ^9 A characteristic that allows for stable, high-precision measurement with a single capture (exposure) at all levels of reflectance, from black (low) to glossy surfaces (high). ^10 The value when a head cable (CB-B) or extension cable (CB-BE) is connected. Does not include CB-B*L connection. ^11 When measuring white paper, illuminance on the sensor head receiving surface when light is applied to white paper. ^*12 The head needs to be mounted to a metal plate to be used.

Keyence CL-S015EX Keyence

$0.00

Sold Out

Specifications

Model				CL-S015EX ^*1
Type				Sensor head (Explosion-proof 15 mm model)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.

Keyence LJ-X8300 Keyence

$0.00

Sold Out

Specifications

Model			LJ-X8300
Reference distance			288 mm 11.34"
Measurement range	Z-axis (height)		±53 mm 2.09" (F.S.=106 mm 4.17")
	X-axis (width)	NEAR side	134 mm 5.28"
		Reference distance	150 mm 5.91"
		FAR side	160 mm 6.30"
Light source			Blue semiconductor laser
Light source	Wavelength		405 nm (visible light)
	Laser class		Class 2M laser product (IEC60825-1, FDA (CDRH) Part 1040.10 ^1) ^2
	Output		10 mW
Spot size			Approx. 215 mm × 108 μm 8.46" × 0.0042" (reference distance)
Repeatability	Z-axis (height)		3 μm 0.000118" ^3^4
	X-axis (width)		5 μm 0.000197" ^3^5
Linearity	Z-axis (height)		±0.033% of F.S. (±0.005%) ^*6
Profile data interval	X-axis (width)		50 μm 0.0020" (40 μm 0.0016"~) ^*7
Profile data count			3200 points
HDR (high dynamic range)			Single-shot HDR ^*8
Laser irradiation position confirmation function	Light source		Blue LED (405 nm)
Temperature characteristic			0.01% of F.S./°C
Environmental resistance	Enclosure rating		IP67 (IEC60529) ^*9
	Ambient light		Incandescent lamp: 10,000 lux or less ^*10
	Ambient temperature		0 to +45°C 32 to +113°F ^*11
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance		10 to 57 Hz, double amplitude 1.5 mm 0.06"; 3 hours each for X, Y, and Z axes
	Shock resistance		15 G / 6 msec
Material			Aluminum
Weight			Approx. 1400 g 3.09 lb
^1 Classification performed based on IEC60825-1 in accordance with FDA (CDRH) Laser Notice. ^2 Do not view the beam directly using optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Observing the laser output using optical instruments is dangerous and may damage the eyes. ^3 Values measured by averaging 4096 times at the reference distance. ^4 The measured target is a KEYENCE standard target. Value when the average height of the default setting area is measured with height and position tools. All other settings are default values. ^5 The measured target is a pin gauge. Value when the point of intersection for the pin gauge rounded surface and edge level is measured using height and position tools. All other settings are default values. ^6 The measured target is a KEYENCE standard target. Profile data when measured by smoothing 64 times and averaging 8 times. All other settings are default values. Values inside parentheses are representative examples of averages for all profile data. ^7 The profile data interval can be changed. If changed, the measurement range in the X direction will also change. ^8 A characteristic that allows for stable, high-precision measurement with a single capture (exposure) at all levels of reflectance, from black (low) to glossy surfaces (high). ^9 The value when a head cable (CB-B) or extension cable (CB-BE) is connected. Does not include CB-BL connection. ^10 When measuring white paper, illuminance on the sensor head receiving surface when light is applied to white paper. ^*11 The head needs to be mounted to a metal plate to be used.

Keyence CL-S015 Keyence

$0.00

Sold Out

Specifications

Model				CL-S015 ^*1
Type				Sensor head (Ultra-high-accuracy 15 mm model)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.

Keyence LJ-X8200 Keyence

$7,013.76

Only 2 units left

Specifications

Model			LJ-X8200
Reference distance			245 mm 9.65"
Measurement range	Z-axis (height)		±34 mm 1.34" (F.S.=68 mm 2.68")
	X-axis (width)	NEAR side	64 mm 2.52"
		Reference distance	72 mm 2.83"
		FAR side	80 mm 3.15"
Light source			Blue semiconductor laser
Light source	Wavelength		405 nm (visible light)
	Laser class		Class 2M laser product (IEC60825-1, FDA (CDRH) Part 1040.10 ^1) ^2
	Output		10 mW
Spot size			Approx. 115 mm × 116 μm 4.53" × 0.0046" (reference distance)
Repeatability	Z-axis (height)		1 μm 0.000039" ^3^4
	X-axis (width)		3 μm 0.000118" ^3^5
Linearity	Z-axis (height)		±0.04% of F.S. (±0.006%) ^*6
Profile data interval	X-axis (width)		25 μm 0.0010" (20 μm 0.0008"~) ^*7
Profile data count			3200 points
HDR (high dynamic range)			Single-shot HDR ^*8
Laser irradiation position confirmation function	Light source		Blue LED (405 nm)
Temperature characteristic			0.01% of F.S./°C
Environmental resistance	Enclosure rating		IP67 (IEC60529) ^*9
	Ambient light		Incandescent lamp: 10,000 lux or less ^*10
	Ambient temperature		0 to +45°C 32 to +113°F ^*11
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance		10 to 57 Hz, double amplitude 1.5 mm 0.06"; 3 hours each for X, Y, and Z axes
	Shock resistance		15 G / 6 msec
Material			Aluminum
Weight			Approx. 1200 g 2.65 lb
^1 Classification performed based on IEC60825-1 in accordance with FDA (CDRH) Laser Notice. ^2 Do not view the beam directly using optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Observing the laser output using optical instruments is dangerous and may damage the eyes. ^3 Values measured by averaging 4096 times at the reference distance. ^4 The measured target is a KEYENCE standard target. Value when the average height of the default setting area is measured with height and position tools. All other settings are default values. ^5 The measured target is a pin gauge. Value when the point of intersection for the pin gauge rounded surface and edge level is measured using height and position tools. All other settings are default values. ^6 The measured target is a KEYENCE standard target. Profile data when measured by smoothing 64 times and averaging 8 times. All other settings are default values. Values inside parentheses are representative examples of averages for all profile data. ^7 The profile data interval can be changed. If changed, the measurement range in the X direction will also change. ^8 A characteristic that allows for stable, high-precision measurement with a single capture (exposure) at all levels of reflectance, from black (low) to glossy surfaces (high). ^9 The value when a head cable (CB-B) or extension cable (CB-BE) is connected. Does not include CB-BL connection. ^10 When measuring white paper, illuminance on the sensor head receiving surface when light is applied to white paper. ^*11 The head needs to be mounted to a metal plate to be used.

Keyence CL-PT010 Keyence

$0.00

Sold Out

Specifications

Model				CL-PT010 ^*1
Type				Sensor head (Profile Measurement Model)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.

Keyence LJ-X8080 Keyence

$5,310.20

Only 10 units left

Specifications

Model			LJ-X8080
Reference distance			73 mm 2.87"
Measurement range	Z-axis (height)		±20.5 mm 0.81" (F.S.=41 mm 1.61")
	X-axis (width)	NEAR side	30 mm 1.18"
		Reference distance	35 mm 1.38"
		FAR side	39 mm 1.54"
Light source			Blue semiconductor laser
Light source	Wavelength		405 nm (visible light)
	Laser class		Class 2M laser product (IEC60825-1, FDA (CDRH) Part 1040.10 ^1) ^2
	Output		10 mW
Spot size			Approx. 44 mm × 72 μm 1.73" × 0.0028" (reference distance)
Repeatability	Z-axis (height)		0.5 μm 0.000020" ^3^4
	X-axis (width)		1.0 μm 0.000039" ^3^5
Linearity	Z-axis (height)		±0.03% of F.S. (±0.004%) ^*6
Profile data interval	X-axis (width)		12.5 μm 0.0005" (10 μm 0.0004"~) ^*7
Profile data count			3200 points
HDR (high dynamic range)			Single-shot HDR ^*8
Laser irradiation position confirmation function	Light source		Blue LED (405 nm)
Temperature characteristic			0.01% of F.S./°C
Environmental resistance	Enclosure rating		IP67 (IEC60529) ^*9
	Ambient light		Incandescent lamp: 10,000 lux or less ^*10
	Ambient temperature		0 to +45°C 32 to +113°F ^*11
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance		10 to 57 Hz, double amplitude 1.5 mm 0.06"; 3 hours each for X, Y, and Z axes
	Shock resistance		15 G / 6 msec
Material			Aluminum
Weight			Approx. 1100 g 2.43 lb
^1 Classification performed based on IEC60825-1 in accordance with FDA (CDRH) Laser Notice. ^2 Do not view the beam directly using optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Observing the laser output using optical instruments is dangerous and may damage the eyes. ^3 Values measured by averaging 4096 times at the reference distance. ^4 The measured target is a KEYENCE standard target. Value when the average height of the default setting area is measured with height and position tools. All other settings are default values. ^5 The measured target is a pin gauge. Value when the point of intersection for the pin gauge rounded surface and edge level is measured using height and position tools. All other settings are default values. ^6 The measured target is a KEYENCE standard target. Profile data when measured by smoothing 64 times and averaging 8 times. All other settings are default values. Values inside parentheses are representative examples of averages for all profile data. ^7 The profile data interval can be changed. If changed, the measurement range in the X direction will also change. ^8 A characteristic that allows for stable, high-precision measurement with a single capture (exposure) at all levels of reflectance, from black (low) to glossy surfaces (high). ^9 The value when a head cable (CB-B) or extension cable (CB-BE) is connected. Does not include CB-BL connection. ^10 When measuring white paper, illuminance on the sensor head receiving surface when light is applied to white paper. ^*11 The head needs to be mounted to a metal plate to be used.

Keyence CL-P150 Keyence

$0.00

Sold Out

Specifications

Model				CL-P150 ^*1
Type				Sensor head (150 mm・Focused spot type)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.

Keyence LJ-X8060 Keyence

$10,991.35

Only 2 units left

Specifications

Model			LJ-X8060
Reference distance			64 mm 2.52"
Measurement range	Z-axis (height)		±7.3 mm 0.29" (F.S.=14.6 mm 0.57")
	X-axis (width)	NEAR side	15 mm 0.59"
		Reference distance	16 mm 0.63"
		FAR side
Light source			Blue semiconductor laser
Light source	Wavelength		405 nm (visible light)
	Laser class		Class 2M laser product (IEC60825-1, FDA (CDRH) Part 1040.10 ^1) ^2
	Output		10 mW
Spot size			Approx. 25 mm × 49 μm 0.98" × 0.0019" (reference distance)
Repeatability	Z-axis (height)		0.4 μm 0.000016" ^3^4
	X-axis (width)		0.5 μm 0.000020" ^3^5
Linearity	Z-axis (height)		±0.04% of F.S. (±0.008%) ^*6
Profile data interval	X-axis (width)		5 μm 0.000197" (4 μm 0.000157"~) ^*7
Profile data count			3200 points
HDR (high dynamic range)			Single-shot HDR ^*8
Laser irradiation position confirmation function	Light source		Blue LED (405 nm)
Temperature characteristic			0.01% of F.S./°C
Environmental resistance	Enclosure rating		IP67 (IEC60529) ^*9
	Ambient light		Incandescent lamp: 10,000 lux or less ^*10
	Ambient temperature		0 to +45°C 32 to +113°F ^*11
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance		10 to 57 Hz, double amplitude 1.5 mm 0.06"; 3 hours each for X, Y, and Z axes
	Shock resistance		15 G / 6 msec
Material			Aluminum
Weight			Approx. 1000 g 2.20 lb
^1 Classification performed based on IEC60825-1 in accordance with FDA (CDRH) Laser Notice. ^2 Do not view the beam directly using optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Observing the laser output using optical instruments is dangerous and may damage the eyes. ^3 Values measured by averaging 4096 times at the reference distance. ^4 The measured target is a KEYENCE standard target. Value when the average height of the default setting area is measured with height and position tools. All other settings are default values. ^5 The measured target is a pin gauge. Value when the point of intersection for the pin gauge rounded surface and edge level is measured using height and position tools. All other settings are default values. ^6 The measured target is a KEYENCE standard target. Profile data when measured by smoothing 64 times and averaging 8 times. All other settings are default values. Values inside parentheses are representative examples of averages for all profile data. ^7 The profile data interval can be changed. If changed, the measurement range in the X direction will also change. ^8 A characteristic that allows for stable, high-precision measurement with a single capture (exposure) at all levels of reflectance, from black (low) to glossy surfaces (high). ^9 The value when a head cable (CB-B) or extension cable (CB-BE) is connected. Does not include CB-BL connection. ^10 When measuring white paper, illuminance on the sensor head receiving surface when light is applied to white paper. ^*11 The head needs to be mounted to a metal plate to be used.

Keyence CL-P070 Keyence

$2,634.98

Only 1 unit left

Specifications

Model				CL-P070 ^*1
Type				Sensor head (70 mm ・Focused spot type)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.

Keyence LJ-X8020 Keyence

$0.00

Sold Out

Specifications

Model			LJ-X8020
Reference distance			20 mm 0.79"
Measurement range	Z-axis (height)		±2.2 mm 0.09" (F.S.=4.4 mm 0.17")
	X-axis (width)	NEAR side	7 mm 0.28"
		Reference distance	7.5 mm 0.30"
		FAR side	8 mm 0.31"
Light source			Blue semiconductor laser
Light source	Wavelength		405 nm (visible light)
	Laser class		Class 2M laser product (IEC60825-1, FDA (CDRH) Part 1040.10 ^1) ^2
	Output		10 mW
Spot size			Approx. 16 mm × 32 μm 0.63" × 0.0013" (reference distance)
Repeatability	Z-axis (height)		0.3 μm 0.000012" ^3^4
	X-axis (width)		0.3 μm 0.000012" ^3^5
Linearity	Z-axis (height)		±0.05% of F.S. (±0.012%) ^*6
Profile data interval	X-axis (width)		2.5 μm 0.000098" (2 μm 0.000079"~) ^*7
Profile data count			3200 points
HDR (high dynamic range)			Single-shot HDR ^*8
Laser irradiation position confirmation function	Light source		Blue LED (405 nm)
Temperature characteristic			0.01% of F.S./°C
Environmental resistance	Enclosure rating		IP67 (IEC60529) ^*9
	Ambient light		Incandescent lamp: 10,000 lux or less ^*10
	Ambient temperature		0 to +45°C 32 to +113°F ^*11
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance		10 to 57 Hz, double amplitude 1.5 mm 0.06"; 3 hours each for X, Y, and Z axes
	Shock resistance		15 G / 6 msec
Material			Aluminum
Weight			Approx. 1000 g 2.20 lb
^1 Classification performed based on IEC60825-1 in accordance with FDA (CDRH) Laser Notice. ^2 Do not view the beam directly using optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Observing the laser output using optical instruments is dangerous and may damage the eyes. ^3 Values measured by averaging 4096 times at the reference distance. ^4 The measured target is a KEYENCE standard target. Value when the average height of the default setting area is measured with height and position tools. All other settings are default values. ^5 The measured target is a pin gauge. Value when the point of intersection for the pin gauge rounded surface and edge level is measured using height and position tools. All other settings are default values. ^6 The measured target is a KEYENCE standard target. Profile data when measured by smoothing 64 times and averaging 8 times. All other settings are default values. Values inside parentheses are representative examples of averages for all profile data. ^7 The profile data interval can be changed. If changed, the measurement range in the X direction will also change. ^8 A characteristic that allows for stable, high-precision measurement with a single capture (exposure) at all levels of reflectance, from black (low) to glossy surfaces (high). ^9 The value when a head cable (CB-B) or extension cable (CB-BE) is connected. Does not include CB-BL connection. ^10 When measuring white paper, illuminance on the sensor head receiving surface when light is applied to white paper. ^*11 The head needs to be mounted to a metal plate to be used.

Keyence CL-P030 Keyence

$1,992.26

In stock, 12 units

Specifications

Model				CL-P030 ^*1
Type				Sensor head (30 mm ・Focused spot type)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.

Keyence XG-X2902LJ Keyence

$46,782.74

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CL-P015 Keyence

$3,550.00

Only 1 unit left

Specifications

Model				CL-P015 ^*1
Type				Sensor head (15 mm ・Focused spot type)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.

Keyence LJ-X8002 Keyence

$7,693.00

Only 1 unit left

Specifications

Model		LJ-X8002
Head input		Up to 2 head units Compatible with LJ-X8000 Series heads and LJ-V7000 Series heads *When using 2 units, heads A and B are the same model.
Sampling cycle (trigger interval)		[2D mode] Maximum speed of 1 kHz (1 ms) ^1 [3D mode] When connecting the LJ-X8000 Series: maximum speed of 16 kHz (63 μs) ^1 When connecting the LJ-V7000 Series: maximum speed of 64 kHz (16 μs) ^2 (Luminance output types for model designations ending with B have a maximum speed of 8 kHz (125 μs)) ^3
Number of registered inspection settings		Up to 1000 (depending on SD card capacity and setting contents) for each of SD cards 1 and 2. External switching is possible
Master profile / number of reference images		[2D mode]Maximum 200 per setting per head (depends on SD card capacity) [3D mode]Maximum 400 per setting (depends on SD card capacity)
Memory card		• SD card slot × 2 • Supports OP-87133 (512 MB), CA-SD1G (1 GB), CA-SD4G (4 GB), CA-SD16G (16 GB) *In the SD1 slot, CA-SD4G is equipped as standard for 8000, and CA-SD1G is equipped as standard for 8000E
Number of tools		[2D mode]100/setting (of those, 20 are for misalignment correction) [3D mode]Maximum of 100/setting
Interface	Control input	20 points (input terminal block: 5 points, parallel I/O: 15 points)
	Control output	28 points (output terminal block: 6 points, parallel I/O: 22 points) Photo MOSFET^*4
	RS-232C	• Value output and control I/O (exclusive use with PLC link using an RS-232C port) • Supports baud rates up to 230,400 bps
	PLC link	• Value output using Ethernet port or RS-232C port, and control I/O (Exclusive use with EtherNet/IP™ and PROFINET. When using an RS-232C port, exclusive use with RS-232C no-procedure communication)
	Ethernet	• Value output and control I/O • In addition to the above functions, can upload/download inspection settings, perform various simulations, send/receive various data including profile and image data, and be used with remote connection programs via KEYENCE PC application software • Supports FTP client and FTP server functions • Supports VNC server functions (for non-PC clients, only displaying the monitor screen is supported) • Supports BOOTP functions • 1000BASE-T/100BASE-TX/10BASE-T • Supports jumbo frames (when connected to any of CB-NEC20E/NEP20E/NPN20E)
	USB	• Can output values (3D mode only), upload/download inspection settings, perform various simulations, send/receive various data including profile and image data, and be used with remote connection programs via KEYENCE PC application software • Dedicated USB 2.0
	EtherNet/IP™	• Can input/output numerical values and perform control I/O using the Ethernet port or the optional EtherNet/IP™ unit CB-NEP20E (Cannot be used with PLC Link, PROFINET, and EtherCAT®) • Supports cyclic communication (max. 1436 bytes) and message communication • Maximum number of connections: 32 (Ethernet port)/1: Exclusive Owner, 4: Input Only (CB-NEP20E) • Complies with Version.CT15 (Ethernet port)/CT17 (CB-NEP20E) conformance test
	PROFINET	• Can input/output numerical values and perform control I/O using the Ethernet port or the optional PROFINET unit CB-NPN20EA (Cannot be used with PLC Link, EtherNet/IP, and EtherCAT®) • Supports cyclic communication (max. 1408 bytes) (Ethernet port) / 1252 bytes (CB-NPN20EA) • Supports acyclic communication (recorded data) • Complies with Conformance Class A (Ethernet port) / C (CB-NPN20EA)
	EtherCAT^®	• Can output numerical values and perform control I/O by connecting the optional EtherCAT® unit CB-NEC20E (Cannot be used with PLC link, EtherNet/IP™, and PROFINET) • Supports cyclic communication (process data object communication) (Input: Max. 536 bytes/Output: Max. 532 bytes) • Supports acyclic communication (mailbox communication) • Supports CoE • Explicit Device Identification • Complies with V2.2.10 and V2.2.1.0 conformance test
	Mouse	Various menus can be controlled via the dedicated mouse (included with the controller)
	SNTP	Automatic correction of date and time for this unit is possible by connecting to an SNTP server
	USB HDD	By connecting an HDD (max. 2 TB) to the dedicated USB port (supports USB 3.0, bus-powered, rated output: 900 mA), profile, image and other data can be output
	Monitor output	Analog RGB output, XGA 1024 × 768 (24-bit color, 60 Hz)
Encoder input		1 port: combination RS-422 line-driver output (with 5 V output: maximum 150 mA) open collector output (compatible with 5 V, 12 V, 24 V)
Response frequency	RS-422	Single phase / Z phase: 1.6 MHz, 2 phase / 1x: 1.6 MHz, 2 phase / 2x: 3.2 MHz, 2 phase / 4x: 6.4 MHz
	Open collector (OC)	Single phase / Z phase: 100 kHz, 2 phase / 1x: 100 kHz, 2 phase / 2x: 200 kHz, 2 phase / 4x: 400 kHz
Laser ON input		Non-voltage input (Shorted with short pin when shipped from factory)
Cooling fan		Provided
Minimum display unit		[2D mode]0.1 µm 0.000004", 0.01°, 0.00001 mm² [3D mode]0.1 µm 0.000004", 0.001°, 0.0001 mm2, 0.00001 mm³
Language		Switchable between English, Japanese, Simplified Chinese, Traditional Chinese, Korean, German, French, Italian, Thai, Czech, Hungarian, and Polish
Ratings	Power voltage	24 V DC ±10%
	Maximum current consumption	3.3 A
Environmental resistance	Ambient temperature	0 to +45°C 32 to +113°F (DIN rail mounting) / 0 to +40°C 32 to +104°F (base surface mounting)
	Relative humidity	85% RH or less (no condensation)
Weight		Approx. 2500 g
^1 When the measurement range is narrowed in accordance with the binning settings. ^2 When the measurement range is set to minimum, binning is ON, and parallel imaging is ON. All other settings are default values. ^3 When binning and parallel imaging are both ON. All other settings are default values. ^4 Positive common connection is supported for NPN input devices, and negative common connection for PNP input devices.

Keyence CL-P007 Keyence

$3,479.00

Only 1 unit left

Specifications

Model				CL-P007 ^*1
Type				Sensor head (Compact ø8 ・Focused spot type)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.

Keyence LJ-X8000E Keyence

$9,070.49

Only 4 units left

Specifications

Model		LJ-X8000E^*1
Head input		Up to 2 head units Compatible with LJ-X8000 Series heads and LJ-V7000 Series heads *When using 2 units, heads A and B are the same model.
Sampling cycle (trigger interval)		[2D mode] Maximum speed of 1 kHz (1 ms) ^*2 [3D mode] -
Number of registered inspection settings		Up to 1000 (depending on SD card capacity and setting contents) for each of SD cards 1 and 2. External switching is possible
Master profile / number of reference images		Maximum 200 per setting per head (depends on SD card capacity)
Memory card		• SD card slot × 2 • Supports OP-87133 (512 MB), CA-SD1G (1 GB), CA-SD4G (4 GB), CA-SD16G (16 GB) *In the SD1 slot, CA-SD4G is equipped as standard for 8000, and CA-SD1G is equipped as standard for 8000E
Number of tools		100/setting (of those, 20 are for misalignment correction)
Interface	Control input	20 points (input terminal block: 5 points, parallel I/O: 15 points)
	Control output	28 points (output terminal block: 6 points, parallel I/O: 22 points) Photo MOSFET^*3
	RS-232C	• Value output and control I/O (exclusive use with PLC link using an RS-232C port) • Supports baud rates up to 230,400 bps
	PLC link	• Value output using Ethernet port or RS-232C port, and control I/O (Exclusive use with EtherNet/IP™ and PROFINET. When using an RS-232C port, exclusive use with RS-232C no-procedure communication)
	Ethernet	• Value output and control I/O • In addition to the above functions, can upload/download inspection settings, perform various simulations, send/receive various data including profile and image data, and be used with remote connection programs via KEYENCE PC application software • Supports FTP client and FTP server functions • Supports VNC server functions (for non-PC clients, only displaying the monitor screen is supported) • Supports BOOTP functions • 1000BASE-T/100BASE-TX/10BASE-T • Supports jumbo frames (when connected to any of CB-NEC20E/NEP20E/NPN20E)
	USB	• Can output values (3D mode only), upload/download inspection settings, perform various simulations, send/receive various data including profile and image data, and be used with remote connection programs via KEYENCE PC application software • Dedicated USB 2.0
	EtherNet/IP™	• Can input/output numerical values and perform control I/O using the Ethernet port or the optional EtherNet/IP™ unit CB-NEP20E (Cannot be used with PLC Link, PROFINET, and EtherCAT®) • Supports cyclic communication (max. 1436 bytes) and message communication • Maximum number of connections: 32 (Ethernet port)/1: Exclusive Owner, 4: Input Only (CB-NEP20E) • Complies with Version.CT15 (Ethernet port)/CT17 (CB-NEP20E) conformance test
	PROFINET	• Can input/output numerical values and perform control I/O using the Ethernet port or the optional PROFINET unit CB-NPN20EA (Cannot be used with PLC Link, EtherNet/IP, and EtherCAT®) • Supports cyclic communication (max. 1408 bytes) (Ethernet port) / 1252 bytes (CB-NPN20EA) • Supports acyclic communication (recorded data) • Complies with Conformance Class A (Ethernet port) / C (CB-NPN20EA)
	EtherCAT^®	• Can output numerical values and perform control I/O by connecting the optional EtherCAT® unit CB-NEC20E (Cannot be used with PLC link, EtherNet/IP™, and PROFINET) • Supports cyclic communication (process data object communication) (Input: Max. 536 bytes/Output: Max. 532 bytes) • Supports acyclic communication (mailbox communication) • Supports CoE • Explicit Device Identification • Complies with V2.2.10 and V2.2.1.0 conformance test
	Mouse	Various menus can be controlled via the dedicated mouse (included with the controller)
	SNTP	Automatic correction of date and time for this unit is possible by connecting to an SNTP server
	USB HDD	By connecting an HDD (max. 2 TB) to the dedicated USB port (supports USB 3.0, bus-powered, rated output: 900 mA), profile, image and other data can be output
	Monitor output	Analog RGB output, XGA 1024 × 768 (24-bit color, 60 Hz)
Encoder input		1 port: combination RS-422 line-driver output (with 5 V output: maximum 150 mA) open collector output (compatible with 5 V, 12 V, 24 V)
Response frequency	RS-422	Single phase / Z phase: 1.6 MHz, 2 phase / 1x: 1.6 MHz, 2 phase / 2x: 3.2 MHz, 2 phase / 4x: 6.4 MHz
	Open collector (OC)	Single phase / Z phase: 100 kHz, 2 phase / 1x: 100 kHz, 2 phase / 2x: 200 kHz, 2 phase / 4x: 400 kHz
Laser ON input		Non-voltage input (Shorted with short pin when shipped from factory)
Cooling fan		Provided
Minimum display unit		0.1 µm 0.000004", 0.01°, 0.00001 mm²
Language		Switchable between English, Japanese, Simplified Chinese, Traditional Chinese, Korean, German, French, Italian, Thai, Czech, Hungarian, and Polish
Ratings	Power voltage	24 V DC ±10%
	Maximum current consumption	3.3 A
Environmental resistance	Ambient temperature	0 to +45°C 32 to +113°F (DIN rail mounting) / 0 to +40°C 32 to +104°F (base surface mounting)
	Relative humidity	85% RH or less (no condensation)
Weight		Approx. 2500 g
^1 3D mode cannot be used with the LJ-X8000E. ^2 When the measurement range is narrowed in accordance with the binning settings. ^*3 Positive common connection is supported for NPN input devices, and negative common connection for PNP input devices.

Keyence CL-L150 Keyence

$0.00

Sold Out

Specifications

Model				CL-L150 ^*1
Type				Sensor head (150 mm・Quad type)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.

Keyence LJ-X8000A Keyence

$6,649.99

Only 8 units left

Specifications

Model		LJ-X8000A
Head input		Up to 1 head Compatible with LJ-X8000 series heads and LJ-V7000 series heads
Sampling cycle (trigger interval)		When connecting the LJ-X8000 Series: maximum speed of 16 kHz (63 μs) ^1 When connecting the LJ-V7000 Series: maximum speed of 64 kHz (16 μs) ^2 (Luminance output types for model designations ending with B have a maximum speed of 8 kHz (125 μs)) ^*3
Interface	Control input	Supports the batch measurement start (MEASURE_START) and batch measurement stop (MEASURE_STOP).
	Control output	•Supports the trigger ready (READY) and system error (ERROR). •Photo MOSFET^*4
	Synchronous input / output	For trigger synchronization of multiple controllers^*5
	Ethernet	Supports the profile output, setting, controll, 1000BASE-T/100BASE-TX^*6
Encoder input		One system RS-422 line driver output (with 5 V output: Up to 150 mA), Open collector output (5 V / 24 V compatible) combined use
Response frequency	RS-422	Single phase/Z-phase : 1.6 MHz 2-phase/1-multiplier : 1.6 MHz 2-phase/2-multiplier : 3.2 MHz, 2-phase/4-multiplier : 6.4 MHz
	Open collector (OC)	Single phase/Z-phase : 100 kHz 2-phase/1-multiplier : 100 kHz 2-phase/2-multiplier : 200 kHz, 2-phase/4-multiplier : 400 kHz
Laser ON input		Non-voltage Input (a short circuit via the short pin at the time of shipment from the factory)
Ratings	Power voltage	24 VDC±10%
	Maximum current consumption	1.3A
Environmental resistance	Ambient temperature	0 to + 45 °C (DIN rail mounting) / 0 to + 40 °C (side mounting)
	Relative humidity	85% RH or less (no condensation)
Weight		Approx. 700 g
^1 When the measurement range is narrowed in accordance with the binning settings. ^2 When the measurement range is set to minimum, binning is ON, and parallel imaging is ON. All other settings are default values. ^3 When binning and parallel imaging are both ON. All other settings are default values. ^4 Both plus common connection for NPN input devices and minus common connection for PNP input devices are possible. ^5 Dedicated to synchronous I/O between controllers (LJ-X8000A). ^6 The communication library (DLL) and the sample program are included in the PC application (LJ-H2X).

Keyence CL-L070 Keyence

$7,984.20

Only 3 units left

Specifications

Model				CL-L070 ^*1
Type				Sensor head (70 mm ・Quad type)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.

Keyence OP-89042 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CL-L030 Keyence

$0.00

Sold Out

Specifications

Model				CL-L030 ^*1
Type				Sensor head (30 mm ・Quad type)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.

Previous Page 11 / 30Next

Filters

In stock (386)
Out of stock (658)