Machine Vision Systems

Keyence FD-M5AT Keyence

$1,373.95

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence AP-C33K Keyence

$408.00

Only 1 unit left

Specifications

Model		AP-C33K
Type		Positive pressure, NPN
Rated pressure		0 to 145.0 Psi
Fluid type		Air or non-corrosive gases
Type of pressure		Gauge pressure
Display		3 1/2-digit, 2-color, 7-segment LED (Character height: 0.43" (11 mm)) Display cycle: 10 times/s
Operation indicator		Red LED x 2 (corresponding to control output 1 and 2)
Display resolution		Normal mode: 0.2 Psi, Focus mode: 0.02 Psi
Power consumption	Normal	12 V: 720 mW (60 mA) or less, 24 V: 960 mW (40 mA) or less
	Eco mode	12 V: 480 mW (40 mA) or less, 24 V: 720 mW (30 mA) or less
Display temperature characteristic		±1 % of F.S. max.
Hysteresis		Variable (Standard: 0.5 % of F.S.)^*1
Response time (Chattering prevention function)		2.5, 5, 100, or 500 ms (selectable)
I/O	Analog output	1 to 5 V with load impedance of 1 kΩ max. (or zero-shift input selectable)
	Zero-shift input	Input time: 2 ms or more. (or analog output selectable)
	Control output	NPN open collector 100 mA max. (at 40 V or below) with max. residual voltage of 1 V, 2 outputs (NO or NC selectable)
Pressure port		NPT 1/8 180 ° rotation
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Environmental resistance	Pressure resistance	1.5 MPa
	Ambient temperature	0 to 50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate, Pressure port: Zinc die-casting
Accessories		Power supply cord (6.6' 2-m with connector), Unit seal
Weight		Approx. 30 g (without cable) /Approx. 85 g (with 6.6' 2-m cable)
^*1 A standard of 0.2 % of FS applies while in focus mode.

Keyence FL-P160 Keyence

$0.00

Sold Out

Specifications

Model				FL-P160
Probe length				1,600^*1
Measurement range (dead zone excluded)				1,565 (1,520)^*2
Weight				Approx. 650 g
^1 Total length including the projected areas of the sensor refer to External Dimension Diagrams for details. Can be shortened up to 100 mm 3.93". ^2 If the probe is shortened

Keyence UD-320 Keyence

$1,405.11

In stock, 12 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-GD100U Keyence

$0.00

Sold Out

Specifications

Model				FD-GD100U
Pipe size/Outer diameter				4" (100 A) ø111 to ø117 mm ø4.37" to ø4.61"
Weight				Approx. 0.56 kg

Keyence CA-LH16HIGH-RESOLUTION Keyence

$478.40

Only 3 units left

Buy the Keyence CA-LH16HIGH-RESOLUTION - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence CA-LH16HIGH-RESOLUTION is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence XR-HT15M Keyence

$2,863.75

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence PR-FB15N1 Keyence

$443.88

Only 2 units left

Specifications

Model		PR-FB15N1
Type		Reflective (Background suppression)
Output		NPN
Shape		Flat
Cable connection		1 m cable
Detection distance		1 to 15 mm 0.04" to 0.59"
Number of control outputs		2 outputs
Output operation	Output 1	Light-ON
	Output 2	Dark-ON
Response time	Output 1	0.5 ms
	Output 2	ON→OFF: 2.7 ms, OFF→ON: 0.5 ms
Sensitivity adjustment		None
Spot diameter		Approx. 2.5 x 4.5 mm (at 15 mm)
Light source		4 element, point light source, red LED (650 nm)
Mutual interference prevention function		4 sensors
Indicator lamp		Output indicator (orange), stable operation indicator (green), thrubeam type transmitter: power supply indicator (green)
Control output		30 VDC or lower, 50 mA or lower Leakage current: When 3 kΩ load resistance, 0.3 mA or lower. When 1 kΩ load resistance, 0.5 mA or lower. When 0.2 kΩ load resistance, 1.5 mA or lower Residual voltage: When 10 mA or lower, 1.0 V or lower. When 10 to 30 mA, 1.5 V or lower. When 30 to 50 mA, 2.0 V or lower.
Protection circuit		Power supply reverse connection protection, output overcurrent protection, output surge protection, power supply surge protection
Rating	Power voltage	10 to 30 VDC, including Ripple (P-P) 10 %
	Current consumption	19 mA
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP69K (DIN40050-9), 4X, 6P, 13 (NEMA250)
	Insulation resistance	20 MΩ or higher (500 VDC)
	Ambient light	Incandescent lamp: 5,000 lux or lower, Sunlight: 20,000 lux or lower
	Ambient temperature	-25 to +55 °C -13 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, indicator cover/lens cover: polysulfone, cord protector: polymethylpentene, filler: polyester-based resin
Accessories		Instruction manual
Weight		Approx. 18 g

Keyence SH-305 Keyence

$428.09

Only 3 units left

Specifications

Model		SH-305
Type		Standard Shielded Cylindrical
Shape		ø5.4×18 Cylindrical
Detectable object		Ferrous metal (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		5 x 5 mm 0.20"^*1
Stable detecting range		0 to 1 mm 0.04"
Maximum detecting distance		3 mm 0.12"
Repeatability		0.001 mm 0.00004"^*1
Hysteresis		0.01 mm 0.0004"^*1
Temperature characteristics		0.08%/°C^*1
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 45 g
^*1 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.

Keyence OP-35388 Keyence

$0.00

Sold Out

Specifications

Model				OP-35388
Overview				Joint converting M5 male thread to R1/8.
Applicable product				AP-41, AP-43, AP-44
Material				Nickel plated brass

Keyence KV-40T Keyence

$825.44

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence WM-RB Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FR-LW20 Keyence

$0.00

Sold Out

Specifications

Model		FR-LW20
Type		2-wire standard model
Measuring range		Up to 20 m 65.6'^*1
Display range		Up to 25 m 82.0'^*1
Measurable dielectric constant of medium		2 or more^*2
Resolution		1 mm 0.04"
Precision		Up to 0.1 m 0.3': ±10 mm 0.39"; 0.1 to 10 m 0.3' to 32.8' : ±1 mm 0.04"; 10 to 20 m 32.8' to 65.6': ±2 mm 0.08" ^*3
Response time		1 s, 4 s (default value), 10 s, 25 s
Tank pressure		-0.1 to +1 MPa (-0.1 to +0.1 MPa below -20°C -4°F)
Material	Tank interior	Lens: PTFE; Internal seal: FKM; Fastener: SUS304
	Housing	PPS PC PA
Connection diameter		G1-1/2 (40A)
Output	No. of control outputs	1
	Control output/auxiliary output	Transistor output (NPN open collector) Common independent type 35 VDC or less, 50 mA max. Residual voltage of 4.0 V or less (50 mA or less) N.O./N.C. switching
	Analog output	4 to 20 mA (Response time: 3 s after internal value is confirmed [90% response])
Network compatibility		HART
Analog output accuracy	Resolution	1 mm 0.04"^*4
	Zero accuracy	±0.1 mA (zero point = 4 mA)^*4
	F.S. accuracy	±0.2 mA (full scale = 20 mA)^*4
Power supply	Power voltage	18.3 to 35 VDC.
	Power consumption	752.5 mW or less (including analog output; excluding load current)
Environmental resistance	Ambient temperature	-30 to +60°C -22 to 140°F (no freezing)
	Relative humidity	Up to 85% RH (no condensation)
	Temperature of coupling used	-30 to +85°C -22 to 185°F (no freezing)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G² X, Y and Z directions
	Shock resistance	100 m/s² (10 G), 16 ms pulses, 1000 times each in X, Y and Z directions
Enclosure rating		IP67 (IEC60529), Enclosure Type 4X (NEMA250)
Protection circuit		Reverse power connection protection, power supply surge protection, output short-circuit protection, output surge protection
Weight		Approx. 920 g 32.45 oz
^1 Guaranteed value in water with the recommended installation. In still water, measurement is possible with water up to the edge of the lens. An undetectable area is present at short range due to the environment and measurement medium. The maximum measuring range is also reduced. ^2 Measurement may not be possible depending on the environment and shape of the target. ^3 Guaranteed value from verification performed at KEYENCE inspection facilities. Measurement errors may occur depending on the customer’s environment. ^4 Guaranteed value from verification performed at KEYENCE inspection facilities with a load resistance of 250 Ω. Measurement errors may occur depending on the customer’s environment.

Keyence OP-89051 Keyence

$0.00

Sold Out

Specifications

Model				OP-89051
Overview				Tungsten electrode probe.
Note				Tungsten electrode probe for SJ-Q (5 supplied)

Keyence OP-87751 Keyence

$0.00

Sold Out

Specifications

Model				OP-87751
Type				Air purge unit
Number included				2 pcs
Weight				1500 g

Keyence LV-22 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Sick VS/VE18-2T2132 THROUGH-BEAM SENS. Sick

$727.35

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Sick VS/VE18-4P3140THROUGH-BEAM SENS. Sick

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Sick VS/VE18-3F3212THROUGH-BEAM SENS. Sick

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Sick VS18L-0D314 THROUGH-BEAM S. SEND. Sick

$223.71

In stock, 12 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Sick ICR845-2L0020S02 Sick

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Sick VS/VE18-4P3612THROUGH-BEAM SENS. Sick

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Sick ICR620D-T51503 Sick

$3,519.40

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-M071C Keyence

$0.00

Sold Out

Specifications

Model		SJ-M071C
Type		Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Ion balance		±30 V^*1
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open collector 100 mA (40 V or less)
	Ion level alarm output
	Condition alarm output
Air purge supplied pressure		0.2 MPa or less
Effective length		324 mm 12.756"^*2
Total length		380 mm 14.961"^*3
Rating	Power voltage	24 VDC ±10 %
	Current consumption	450 mA or less
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 65 % RH (No condensation)
Weight		Approx. 720 g
^1 Operating distance: 50 mm 1.96" (50 Hz), 600 mm 23.62" (8 Hz), 1,500 mm 59.05" (1 Hz). Downward air flow: 0.3 m/s. Air purge: None ^2 Elective length indicates the static elimination rangeat 50 mm operating distance. ^*3 The overall length includes mounting brackets.