Machine Vision Systems

$149.06

Only 5 units left

Specifications

Model				GL-RB21
Type				Deadspace-free Bracket
Applicable product				GL-R Series
Number included				Assembled bracket: 2 units, Instruction manual: 1 manual
Material				Main bracket unit: Zinc die-cast, Hexagonal-socket bolt: Iron (trivalent black)
Weight				Approx. 470 g

Keyence KV-B8RC Keyence

$598.44

Only 3 units left

Specifications

Model		KV-B8RC
Type		Output unit
External connection method		Removable terminal block
Output	Number of outputs	8 points
	Output mode	Relay
	Rated load	250 VAC/30 VDC, 2 A
	Leakage current at OFF	-
	Residual voltage at ON
	ON resistance	50 mΩ or less
	Common method	Independent
	Operation time	OFF to ON/ON to OFF: 10 ms or less
Internal current consumption		65 mA or less
Weight		Approx. 160 g

Keyence GL-VM44HN Keyence

$0.00

Sold Out

Specifications

Model			GL-VM44HN
Beam axis spacing/Lens diameter			20 mm 0.79": ø5 ø0.197"
Number of beam axes			44
Total length			880 mm 34.65"
Detection height			860 mm 33.86"
Protection height			905 mm 35.63"
Minimum detectable object size			ø25 mm ø0.98" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	5.6
		OFF→ON	49.1 ^*3
		All blocked→ON	56.8 ^*4
	With channel A or B	ON→OFF	16.4
		OFF→ON	66.9 ^*3
		All blocked→ON	89.7 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	111 ^*5
		Receiver	122 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	56 ^*5
		Receiver	61 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		580 g 20.47 oz
	Receiver		590 g 20.82 oz
	Total		1170 g 41.30 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence VT3-Q5TA Keyence

$899.91

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-RPC03NS Keyence

$0.00

Sold Out

Specifications

Model				GL-RPC03NS
Type				Main Unit Connection Cable, for Extension
Number included				1 cable
Cable end				Main unit plug (Grey) - M12 connector (8-pin male)
Length				0.3 m 0.98'
Material				Main unit connection connector: PBT, Connector for extension: PVC/nickel-plated brass, Cable: PVC
Note				Use this together with the extension cable.
Weight				Approx. 30 g

Keyence KV-EB1 Keyence

$559.01

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GV-22P Keyence

$924.30

Only 7 units left

Specifications

Model		GV-22P
Type		Amplifier Unit, Expansion Unit
Power consumption	Normal	2200 mW max. (at 30 V: 73.3 mA max.)
	Eco-Half	1700 mW max. (at 30 V: 56.7 mA max.)
	Eco-All	1600 mW max. (at 30 V: 53.3 mA max.)
Display indicator		Dual 7-segment display (Current Value: 3-digit red LED indicator, Preset Value: 3-digit green LED indicator) + 2-color 13-level Bar LED (Red, Green)
Output		PNP
Control output		PNP open collector x 2ch, 30 V DC max./Max. 100 mA, residual voltage 1 V max.
Control input		Emission stop input, Bank switching input, Shift input, Timing input, Each input response time: 20 ms
Response time		1.5/3/10/20/50 ms
Operation status indicators		Control output: Red LED x 2 Channel display: Green LED x 2 Laser radiation emission indicator Green LED Other: Green LED x 2/Red LED x 3
Rating	Power voltage	10 to 30 VDC, including Ripple (P-P) 10 %^*1
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material		Housing material, display cover: Polycarbonate, Key Top: Polyacetal, Cable: PVC
Weight		Approx. 110 g
^*1 If expansion units are added, supply voltage must be 11 to 30 VDC.

Keyence GL-VM24HN Keyence

$0.00

Sold Out

Specifications

Model			GL-VM24HN
Beam axis spacing/Lens diameter			20 mm 0.79": ø5 ø0.197"
Number of beam axes			24
Total length			480 mm 18.90"
Detection height			460 mm 18.11"
Protection height			505 mm 19.88"
Minimum detectable object size			ø25 mm ø0.98" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	4.8
		OFF→ON	46.7 ^*3
		All blocked→ON	53.2 ^*4
	With channel A or B	ON→OFF	13.0
		OFF→ON	63.2 ^*3
		All blocked→ON	80.9 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	81 ^*5
		Receiver	92 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	52 ^*5
		Receiver	58 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		320 g 11.29 oz
	Receiver
	Total		640 g 22.59 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence LS-3002 Keyence

$1,553.10

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GC-R48 Keyence

$1,463.05

Only 5 units left

Specifications

Model		GC-R48
Maximum number of connected units		4 (GC-R45 and GC-R48 can be connected together)^*1
Safety input specifications	Input device	Contact output device or PNP output device
	Input type	Type3
	ON level (voltage/current)	Min. 11 V/2 mA
	OFF level (voltage/current)	Max. 5 V/1.5 mA
	Short-circuit current	Approx. 3 mA
	Protection circuit	Surge protection circuit, wrong wiring protection circuit
	Maximum cable length	Max. 100 m 328.1'
Safety output specifications	Output type	PNP transistor output (DC-13, Type 0.5, Protected outputs)^*2 (GC-R48 Pin 3: Lock control output)
	Maximum load current	500 mA (GC-R48 Pin 3: Lock control output)
	Residual voltage (during ON)	Max. 2.0 V (GC-R48 Pin 3: Lock control output)
	Leakage current (during OFF)	Max. 0.5 mA (GC-R48 Pin 3: Lock control output)
	Maximum capacitive load	0.5 µF (GC-R48 Pin 3: Lock control output)
	Protection circuit	Overcurrent protection circuit (GC-R48 Pin 3: Lock control output)
	Maximum cable length	Max. 30 m 98.4' (GC-R48 Pin 3: Lock control output)
Test output specifications	Output type	PNP transistor output (DC-13, Type 0.5, Protected outputs)^*3
	Maximum load current	100 mA^*3
	Protection circuit	Overcurrent protection circuit^*3
	Maximum cable length	Max. 100 m 328.1'^4^3
AUX output specifications	Output type	-
	Maximum load current
	Residual voltage (during ON)
	Leakage current (during OFF)
	Protection circuit
	Maximum cable length
Power supply output	Supported pin	Pin 2^*3
	Power supply capability	Max. 0.5 A^*3
	Protection circuit	Overcurrent protection circuit^*3
Applicable standards	EMC	EMS: IEC 61131-2/-6, EN61131-2/-6, EMI: IEC 61131-2, FCC Part15B Class A, ICES-003, Class A
	Safety	IEC 61508, EN 61508 SIL3, IEC62061 SIL CL3, ISO/EN 13849-1:2015 Cat. 4, PL e, UL1998
Dimensions		64.8×141.5×34.5 mm 2.55"×5.57"×1.36" (W×D×H)
Power supply	Power voltage	24 VDC (-20 to +20 %) Class 2
	Power consumption	Max. 90 mA
Enclosure ratings		IP65/67 (IEC 60529) (TÜV SÜD certified)
Environmental resistance	Ambient temperature	−10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	5 to 85 % (No condensation)
	Storage temperature	−25 to +70 °C -13 to 158 °F (No freezing)
	Operating altitude	Max. 2000 m 6561.7'
	Overvoltage category	Ⅱ
	Pollution degree	2
	Vibration resistance	Frequency: 5 to 9 Hz, Half amplitude: 3.5 mm 0.14" Frequency: 9 to 150 Hz, Acceleration: 10 m/s² 10 times each in X, Y, Z directions
	Shock resistance	Acceleration: 150 m/s², Operating time: 11 ms, 3 times each in X, Y, Z directions
Material		PBT (GF 30 %), SUS304
Weight		Approx. 420 g
^1 When connecting multiple remote I/O modules, power needs to be supplied to each remote I/O module. ^2 Paragraph 6.4.6 Temporary overload of IEC 61131-2 supports up to 1.2 times the maximum load current. ^3 Power supply outputs and test outputs do not comply with paragraph 6.4.6 of IEC 61131-2. ^4 When the test output is branched and connected to multiple safety input devices, the total branched cable length must not exceed 400 m 1312.3'.

Keyence GL-R28H Keyence

$769.02

Only 7 units left

Specifications

Model			GL-R28H
Detection capability			ø0.98" ø25 mm
Total length			22.05" 560mm
No. of beam			28
Detection height			21.26" 540mm
Protection height			23.03" 585mm
Beam axis spacing/Lens diameter			20 mm / ø5 0.79" / ø0.20"
Detecting distance			0.66 to 49.21' 0.2 to 15 m^*1
Effective aperture angle			Max. ±2.5° (When operating distance is 9.84' 3 m or more)
Light source			Infrared LED (870 nm)
Response time (OSSD) (ms)	Wire synchronization, One-line or Optical synchronization system (Channel 0)	ON→OFF	7.4
		OFF→ON	50^*2
		All blocked→ON	66.6^*3
	Optical synchronization system (Channel A or B)	ON→OFF	10.2
		OFF→ON	54^*2
		All blocked→ON	77.5^*3
Detection mode			Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver			Optical synchronization or Wire synchronization (Determined by wiring)
Light interference prevention function			Prevents mutual interference in up to two GL-R systems. Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output		2 transistor outputs. (PNP or NPN is determined by the cable type)
	Max. load current		500 mA^*4
	Residual voltage (during ON)		Max. 2.5 V (with a cable length of 16.40' 5 m)
	OFF state voltage		Max. 2.0 V (with a cable length of 16.40' 5 m)
	Leakage current		Max. 200 µA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
Supplemental output (Non-safety-related output)	AUX		transistor outputs. (PNP or NPN is determined by the cable type) Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m)
	Error output
	Muting lamp output		Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected.
External input	When using a PNP output cable	EDM input Wait input Reset input Muting input 1, 2 Override input	ON voltage: 10 to 30 V OFF voltage: Open or 0 to 3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
	When using an NPN output cable		ON voltage: 0 to 3 V OFF voltage: Open or 10 V or more Up to the power voltage Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
Power supply	Power voltage		24 VDC ±20%, ripple (P-P) 10% or less, Class 2
	Current consumption (Max.) (mA)	Transmitter	59
		Receiver	73
Protection circuit			Reverse current protection, short-circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety		IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1:2015 (Category 4, PLe) UL508 UL1998
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Overvoltage category		II
	Ambient light		Incandescent lamp: 3,000 lux or less., Sunlight: 20,000 lux or less
	Operating ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)
	Operating relative humidity		15 to 85 % RH (No condensation)
	Storage temperature		-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity		15 to 95 % RH
	Vibration resistance		10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance		100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case		Aluminum
	Upper case/lower case		Nylon (GF 30%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		770 g
	Receiver
^1 When the option front protection cover is installed on the one of transmitter or receiver, the Operating distance is shorten by 1.64' 0.5 m. When the front covers are installed on both of the transmitter and receiver, the Operating distance is shorten by 3.28' 1.0 m. ^2 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3 “All blocked” means the situation where the GL-R operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-R synchronizes the transmitter and receiver fi rst and then determines the clear or blocked. ^4 When the GL-R is used under surrounding air temperatures between 50 to 55°C 122°F to 131°F, the Maximum load current should not exceed 350 mA.

Keyence GL-VM15FN Keyence

$0.00

Sold Out

Specifications

Model			GL-VM15FN
Beam axis spacing/Lens diameter			10 mm 0.39": ø4 ø0.16"
Number of beam axes			15
Total length			160 mm 6.30"
Detection height			140 mm 5.51"
Protection height			164 mm 6.46"
Minimum detectable object size			ø14 mm ø0.55" ^*1
Detecting distance			0.3 to 12 m 1.0' to 39.4' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	4.5
		OFF→ON	46.5 ^*3
		All blocked→ON	52.5 ^*4
	With channel A or B	ON→OFF	11.5
		OFF→ON	59.8 ^*3
		All blocked→ON	75.3 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	58 ^*5
		Receiver	70 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	50 ^*5
		Receiver	57 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		120 g 4.23 oz
	Receiver
	Total		240 g 8.47 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence OP-83204 Keyence

$0.00

Sold Out

Specifications

Model				OP-83204
Overview				Front protective cover protecting detection side of light curtain.
Applicable product				SL-V96H, SL-V48L
Number included				1 pcs.
Length				1,910.2 mm 75.2"
Material				Translucent plastic: Polycarbonate Black plastic: ABS
Note				To install this product on both the transmitter and receiver, 2 sets are required. Use the dimming filters (sold separately) by attaching them to the front protection cover. When the front protection cover is attached, the L-shaped mounting bracket (OP-42

Keyence FD-EPH13 Keyence

$0.00

Sold Out

Specifications

Model				FD-EPH13
Pipe size	Outer diameter of pipe			1/2” (Approx. 12.7 mm 0.50") ^*1
	Compatible outer diameter range	Polyurethane		12.7 ±0.15 mm 0.50" ±0.006"
		Nylon		12.7 ±0.1 mm 0.50" ±0.004"
	Pipe materials			Resin pipe connectible to a one-touch coupling
Supported gases				Air, nitrogen, argon, and non-corrosive gases^*2
Supported gas temperature				−10°C to +60°C 14 to 140°F
Pressure resistance				1 MPa
Flow rate detection principle				Ultrasonic transmission time difference method
Flow rate specifications	Rated flow rate	(volume flow rate)		250 L/min 8.83 CFM
		(20°C 68°F, atmospheric pressure conversion) * Initial display	Gas at 20°C 68°F, 0.0 MPa
			Gas at 20°C 68°F, 0.2 MPa	750 L/min 26.5 CFM
			Gas at 20°C 68°F, 0.4 MPa	1250 L/min 44.1 CFM
			Gas at 20°C 68°F, 0.6 MPa	1750 L/min 61.8 CFM
	Measurement accuracy			±(2.0% of RD+1.0% of F.S.)^3^4
	Repeatability			Response time of 250 ms: ±2.5% of F.S.^3^5
Pressure specifications	Rated pressure			−100 kPa to +0.75 MPa * However, the flow rate cannot be measured in the range of −100 to −30 kPa.
	Overall accuracy			±2.0% of F.S.^*3
	Repeatability			Response time of 2.5 ms: ±0.4% of F.S.
Display resolution	Instantaneous flow			0.1/1 L/min
	Accumulated flow			0.1/1/10/100/1000 L
	Pressure			0.1/1 kPa
Environmental resistance	Enclosure rating			IP65 (IEC60529)
	Ambient temperature			−10°C to +60°C 14 to 140°F (no freezing)
	Relative humidity			35%RH to 85%RH (no condensation)
	Vibration resistance			10 to 500 Hz, power spectral concentration: 0.816 G²/Hz, XYZ axes
	Shock resistance			100 m/s², 16 ms pulse, XYZ axes, 1000 times for each axis
Material	Sensor unit (parts that do not contact the gas)			PBT/PAR/iron/Brass electroless nickel plating/POM/NBR/stainless steel
	Flow channel (parts that contact the gas)			PBT/Brass electroless nickel plating/NBR/nylon
Weight				Approx. 208 g 7.34 oz
^1 To ensure stable detection, it is recommended to use a pipe inner diameter that is at least equivalent to the inner diameter of this product. ^2 Gases that transmit ultrasonic waves. Measurement may be unstable due to the pressure inside of the pipe and the type of gas. ^3 This value is guaranteed by KEYENCE inspection facilities. Errors will be introduced by factors such as the condition and type of pipes as well as the temperature and type of gas. ^4 This specification is valid when sufficient straight sections of pipe are provided and the flow velocity distribution is stable. This value does not take into account the effects of fluctuations in flow velocity distribution due to facility factors. ^*5 Accuracy improves with longer response times. As a rule, this is by a proportion of √(250 ms/response time)x.

Keyence GL-VM40LP Keyence

$0.00

Sold Out

Specifications

Model			GL-VM40LP
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			40
Total length			1600 mm 62.99"
Detection height			1560 mm 61.42"
Protection height			1645 mm 64.76"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	5.5
		OFF→ON	49.7 ^*3
		All blocked→ON	57.2 ^*4
	With channel A or B	ON→OFF	15.7
		OFF→ON	63.9 ^*3
		All blocked→ON	85.6 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	155 ^*5
		Receiver	170 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	55 ^*5
		Receiver	61 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		1040 g 36.71 oz
	Receiver		1050 g 37.06 oz
	Total		2090 g 73.77 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence IV3-L5C Keyence

$764.97

Only 5 units left

Specifications

Model		IV3-L5C
Compatible sensor		IV3-500CA
Lights	Illumination	White LED
Power supply		Power is supplied by the connected sensor
Environmental resistance	Enclosure rating	IP67 ^*1
	Ambient temperature	0 to +50°C 32 to 122°F (No freezing)
	Relative humidity	35 to 85%RH (No condensation)
Material		Case: Aluminum die-casting Front cover: Acrylic
Weight		Approx. 195 g 6.88 oz
^*1 Applicable only when mounted to a compatible sensor. Except when the polarizing filter (OP-88644/OP-88645/OP-88646/OP-88647) is mounted.

Keyence PR-M51C3PD Keyence

$1,182.32

Only 5 units left

Specifications

Model		PR-M51C3PD^*1
Type		Thrubeam
Output		PNP
Shape		Mini-slim
Cable connection		M8 connector (3 pin)
Detection distance		1.2 m
Number of control outputs		1 output
Output operation	Output 1	Dark-ON
	Output 2	-
Response time	Output 1	0.5 ms
	Output 2	-
Sensitivity adjustment		None
Spot diameter		-
Light source		4 element, point light source, red LED (650 nm)
Mutual interference prevention function		-
Indicator lamp		Output indicator (orange), stable operation indicator (green), thrubeam type transmitter: power supply indicator (green)
Control output		30 VDC or lower, 50 mA or lower Leakage current: When 3 kΩ load resistance, 0.3 mA or lower. When 1 kΩ load resistance, 0.5 mA or lower. When 0.2 kΩ load resistance, 1.5 mA or lower Residual voltage: When 10 mA or lower, 1.0 V or lower. When 10 to 30 mA, 1.5 V or lower. When 30 to 50 mA, 2.0 V or lower.
Protection circuit		Power supply reverse connection protection, output overcurrent protection, output surge protection, power supply surge protection
Rating	Power voltage	10 to 30 VDC, including 10 % ripple (P-P)
	Current consumption	Transmitter: 11 mA, Receiver: 16 mA
Environmental resistance	Enclosure rating	IP67 (IEC60529), 4X, 6P, 13 (NEMA250)
	Insulation resistance	20 MΩ or higher (500 VDC)
	Ambient light	Incandescent lamp: 5,000 lux or lower, Sunlight: 20,000 lux or lower
	Ambient temperature	-25 to +55 °C -13 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, indicator cover/lens cover: polysulfone, cord protector: polymethylpentene, filler: polyester-based resin
Accessories		Instruction Manual
Weight		Approx. 26 g
^*1 The M8 connector (3 pin) type has 1 control output. If "D" is at the end of the part number, the sensor is equipped with a Dark-ON output. If "L" is at the end of the part number, the sensor is equipped with a Light-ON output. Example: The PR-M51C3PL has a Light-ON output.

Keyence XG-X1202 Keyence

$1,442.75

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IG-H1 Keyence

$0.00

Sold Out

Specifications

Model				IG-H1
Type				PC configuration software
Applicable product				IG Series
Note				Purchase this along with the DL-RS1A communication unit.

Keyence GS-Y13N Keyence

$0.00

Sold Out

Specifications

Model				GS-Y13N
Type				End Terminal for NPN models
Weight				Approx.10 g 0.35 oz

Keyence OP-88216 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-42125 Keyence

$0.00

Sold Out

Specifications

Model				OP-42125
Type				Expansion loose wire cable
Applicable product				FS-17, EZ-8M, EZ-12M, EZ-18T
Length				20 m 65.62' roll
Note				f3.9, 4-core (Brown, Blue, Black, White)

Keyence OP-88997 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence EG-547U (EG-547) Keyence

$0.00

Sold Out

Specifications

Model			EG-547U
Type			AC, tolerance setting^*1
Sensitivity adjustment			10-turn potentiometer dial
Function	Operation mode		External synchronization, analog voltage switch-selectable
	Operation mode	External synchronization	Equipment (both without contacts and with contacts)
Output	Control output 1 (NPN)		100 mA max. (40 V max.) Residual voltage： 1 V max.
	Control output 2		DPST (N.O.), 250 VAC, 0.5 A max. (resistive load)
	Disconnection alarm output (NPN)		―
	Response time (Relay contact)		1 ms
			3 ms
OFF-delay time			―
Temperature characteristics			0.08%/°C^*2
Rating	Power voltage		110/120/220/240 VAC ±10 %, 50/60 Hz
	Power consumption		5 VA max.
Environmental resistance	Ambient temperature		0 to +50 °C 32 to 122 °F
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight			Approx. 390 g
^1 Please contact KEYENCE for information on products that comply with the EMC directive. ^2 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.