Machine Vision Systems

$0.00

Sold Out

Specifications

Model			GL-VM175FN
Beam axis spacing/Lens diameter			10 mm 0.39": ø4 ø0.16"
Number of beam axes			175
Total length			1760 mm 69.29"
Detection height			1740 mm 68.50"
Protection height			1764 mm 69.45"
Minimum detectable object size			ø14 mm ø0.55" ^*1
Detecting distance			0.3 to 12 m 1.0' to 39.4' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	11.2
		OFF→ON	57.6 ^*3
		All blocked→ON	73.7 ^*4
	With channel A or B	ON→OFF	38.4
		OFF→ON	110.7 ^*3
		All blocked→ON	166.5 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	179 ^*5
		Receiver	204 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	66 ^*5
		Receiver	78 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		1140 g 40.24 oz
	Receiver		1160 g 40.94 oz
	Total		2300 g 81.19 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence ER-M045N Keyence

$0.00

Sold Out

Specifications

Model		ER-M045N
Type		Compact all-metal shielded type Cylindrical type ø4.5 Cable NPN output
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode		N.O.
Button		None
Button	Function	―
Detecting distance		1.5 mm 0.06" ±10% ^*2
Response frequency		170 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		5 × 5 mm 0.20" × 0.20"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (0 to +55°C 32°F to 131°F) ±15% or less of detecting distance at +25°C +77°F (-25 to 0°C -13°F to +32°F, +55 to +70°C 131°F to +158°F)
Control output		Open-collector, 30 VDC or less, Max. 50 mA
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	960 mW or less (40 mA or less at 24 V, 60 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing)
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material	Head	SUS316L Epoxy resin
	Amplifier	Header-to-amplifier cable: TPU, Case: PBT/TPU [Connector] Indicator: LCP, Connector metal: SUS303, Connector: LCP [Cable] Indicator: TPU, Power cable: PVC
	Accessories	―
Accessories
Weight		Approx. 65 g 2.29 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used.

Keyence OP-88959 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence AS-421B Keyence

$599.93

Only 1 unit left

Specifications

Model			AS-421B
Type			Amplifier
Sensor head			AH-305
Shape			―
Measuring range			0 to 1.0 mm 0.04"
Analog output voltage	Output voltage		0.2 to 0.6V
	Straight line range		0.2 to 0.6mm 0.008" to 0.024"
	Impedance		100 Ω
	Resolution		0.2% of F.S.
	Linearity		±2.0% of F.S.
	Response		3.3 kHz (-3 dB)
Temperature fluctuation	Sensor head		0.06% of F.S./°C^*1
Temperature characteristics	Amplifier unit		0.1% of F.S./°C^*1
Rating	Power voltage		110/120/220/240 VAC ±10 %, 50/60 Hz
	Power consumption		6VA
Environmentalresistance	Enclosure rating	Sensor head	―
	Operating ambient temperature		-10 to +60°C 14 to 140°F
		Amplifier unit	0 to +50°C 32 to 122°F
Environmental resistance	Relative humidity		35 to 85 % RH (No condensation)
Weight	Sensor head		―
Weight (including cord)	Amplifier unit
^*1 When the distance between the sensor head and the target is within 50% of the measurement range.

Keyence CL-D500 Keyence

$0.00

Sold Out

Specifications

Model		CL-D500
Type		Display panel
Display cycle		Approximately 10 times/second
Minimum display unit		0.001 µm
Display range		± 999.999 µm to ± 9999.99 mm ± 0.0394" to ± 393.70"
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F
	Relative humidity	20% RH to 85% RH (no condensation)
Weight		Approx. 100 g

Keyence CA-DZW15 Keyence

$590.84

Only 1 unit left

Specifications

Model				CA-DZW15
Type				Line Light
LED color				White
Power consumption				14.2 W^*1
Input voltage				12 VDC
Weight				Approx. 480 g
^*1 When using a line camera with the CA-DC21E & CA-DC40E, set light configuration to DC mode.

Keyence OP-88576 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87226 Keyence

$179.69

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence MP-FCBF10 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IV3-400CA Keyence

$1,812.50

Only 1 unit left

Specifications

Model		IV3-400CA
Type		Narrow view
Installed distance		400 mm 15.75" or more ^*1
Tools	Available modes	Standard mode / Sorting mode
	Tool with standard mode	Learning, Outline, Color area ^2, Area ^3, Edge pixels, Color average ^2, Brightness average ^3, Width, Diameter, Edge presence, Pitch, OCR, Color prohibit ^*4, Brightness prohibit, Position adjustment, High-speed position adjustment (1-axis edge/2-axis edge), Blob count
	Number of tools	Total: 65 tools ^*5
Field of view		Installed distance 400 mm 15.75": 58 (H) × 44 (V) mm 2.28" (H) × 1.73" (V) to Installed distance 3000 mm 118.11": 464 (H) × 348 (V) 18.27" (H) × 13.70" (V)
Switch settings (programs)		128 programs (when using SD card) / 32 programs (when not using SD card)
Image receiving element	Type	1/2.9 inch color CMOS
	Number of pixels	1280 (H) × 960 (V)
Image history	Number of storable images	100 images ^*6
	Save conditions	Selectable between NG only, NG and OK near threshold ^7, and All ^6
Focus adjustment		Auto ^*4
Image data transfer	Transfer destination	Selectable between SD card, FTP server and SFTP server
	Transfer format	Selectable between bmp, jpeg, iv3p, and txt, and file names can be modified
	Transfer conditions	Selectable between NG only, NG and OK near threshold ^*8, and All
Exposure time		12 μs to 10 ms
Analysis information	RUN display	Tools list (Judgment results, degree of similarity, or degree of similarity bar display) ^*8
	RUN information	Switchable between OFF, histogram, processing time, count, and output monitor Histogram: Histogram, degree of similarity (Max., Min., Ave.), Number of OKs, Number of NGs Processing time: Processing time (latest, Max., Min., Ave.) Count: Trigger numbers, Number of OKs, Number of NGs, Trigger errors, Strobe errors Output monitor: ON/OFF status by output ^*8
Lights	Illumination	White LED
	Lighting method	Pulse lighting/ continuously lighting is switchable.
Other functions	Image capture function	Digital zoom (2×, 4×), HDR, High gain, Color filter ^2, White balance ^2, Brightness correction, AI capture
	Tool functions	Additional learning, Mask outline, Masking function, Color extraction/exclusion ^2, Color histogram function ^2, Monochrome histogram function ^*3, Scaling function
	Utilities	Failing sensor list, Failure hold, Test run, I/O monitor, Security settings (Two-factor password), Simulator ^*9, Additional FTP/SFTP Image Information, Multi-position adjustment, Multi-master image registration, High-speed program switching, Auto program switching, Auto setting backup/restore, Threshold changing in RUN
Indicators		OUT, TRIG, STATUS, LINK/ACT, SD
Input	Type	Switchable between non-voltage input and voltage input For no-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit) For voltage input: Maximum input rating 30 V, ON voltage 18 V or higher, OFF current 0.15 mA or lower, ON current 2 mA (for 24 V)
	Number of inputs	6 ports, 3 ports are selectable as IN/OUT
	Function	IN1: External trigger, IN2, IN3, I/O1 to I/O3: Enable by assigning optional functions Assignable functions: Program switching, Clear error, External master image registration, SD card save cancel
Output	Type	Photo MOS relay output, N.O./N.C. Switchable Maximum rating 30 V 50 mA, residual voltage 1.5 V or less ^*10
	Number of outputs	6 ports, 3 ports are selectable as IN/OUT
	Function	Enable by assigning the optional functions Assignable functions: Total judgment (OK/NG), Run, Busy, Position adjustment result, Judgment result of each tool, Result of the logical operation of each tool, Error, SD card error, Variety discrimination result, Master judgment result
Power/I/O	Connector	M12 12 pin A code Male connector
	PoE	PoE power Class 3/4/6 ^*11
Ethernet	Standard	1000BASE-T/100BASE-TX
	Connector	M12 8 pin X code Female connector
Network function		FTP client, SFTP client
Interface compatibility	Built-in Ethernet	EtherNet/IP™, PROFINET ^*12, TCP/IP non-procedure communication
Expanded memory		microSD card (microSD/microSDHC) ^*13
Ratings	Power voltage	24 VDC +25%/-20% (including ripple) ^*14
	Current consumption	3.3 A or less (without the AI Lighting unit, and including the output load) 1.8 A or less (AI Lighting unit, and including the output load) ^*15
Environmental resistance	Enclosure rating	IP67 ^*16
	Ambient temperature	0 to +50°C 32 to 122°F (No freezing) ^*17
	Relative humidity	35 to 85% RH (No condensation)
	Vibration resistance	10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions ^*18
	Shock resistance	500 m/s² 1640'/s², 3 times in each of the 6 directions ^*18
Material		Main unit case: Aluminum die-casting/PBT/TPU Indicator light cover: TPU Ethernet connector: Aluminum die-casting/LCP Front cover: Acrylic (hard coating) Power connector: Aluminum die-casting/LCP Nameplate: PET Water proof cap for the Power connector: PC+ABS alloy Water proof cap for the Ethernet connector: PC
Weight		Approx. 300 g 10.59 oz (without the AI Lighting unit) Approx. 495 g 17.47 oz (with the AI Lighting unit)
^1 Removing the polarizing filter is recommended when used at distances of 3 m 9.8' or more. ^2 Color type only. ^3 Monochrome type only. ^4 The focusing position can be automatically adjusted at the time of installation. Disabled during operation. The focusing position can be registered by programs. ^5 Tools can be installed by programs. This is the number of detection tools and position adjustment tools. Up to 64 detection tools can be set. The number of detection tools in Sorting mode are eight tools. ^6 Saves to the sensor’s internal memory. The images saved to the sensor can be backed up to a USB memory stick inserted into the control panel (IV3-CP50) or to the PC where the software for the IV3 Series (IV3-H1) is being used. ^7 Learning tool only. ^8 Can also be displayed on the control panel (IV3-CP50) or the software for the IV3 Series (IV3-H1). ^9 Usable on the software for the IV3 Series (IV3-H1). ^10 Make sure to keep a total of each output with 120 mA or less. ^11 For a PoE power supply device, IEEE802.3at power class 4 or higher is recommended when using the AI Lighting unit, and IEEE802.3bt power class 6 or higher is recommended when the AI Lighting unit is not used. When using PoE operation may be restricted due to power limitation. ^12 Conformance Class B, applicable protocol: LLDP, SNMP. ^13 Use only products recommended by KEYENCE. ^14 When using the OP-88656 (10 m 32.8'), the power voltage is 24 V DC +25%/-10% (including ripple). ^15 The peak current is designed to be smaller if the AI Lighting unit is mounted. The peak current is greater if the AI Lighting unit is not mounted. ^16 Except when the polarizing filter (OP-88640/OP-88641/OP-88644/OP-88645) is mounted. ^17 For situations where the operating ambient temperature will exceed 40°C 104°F, follow KEYENCE’s specified heat dissipation measures to ensure the case temperature does not exceed the rated maximum temperature (65°C 149°F). Check the instruction manual for more information. ^18 Except when the dome attachment (IV3-D10) is mounted.

Keyence CB-C3R Keyence

$0.00

Sold Out

Specifications

Model				CB-C3R
Type				Head connection cable
Cable length				3 m 9.8'
Weight				Approx. 250 g 8.83 oz

Keyence AS-425K Keyence

$600.00

Only 1 unit left

Specifications

Model			AS-425K
Type			Amplifier unit for high temperatures
Sensor head			AH-809
Shape			Cylindrical, diameter: 9.4
Measuring range			0.5 to 1.0 mm0.02" to 0.039"
Analog output voltage	Output voltage		0.5 to 1.0V
	Straight line range		―
	Impedance		100 Ω
	Resolution		0.4% of F.S.^*1
	Linearity		±4% of F.S.
	Response		3.3kHz (-3dB)
Temperature fluctuation	Sensor head		0.14% of F.S./°C^*2
Temperature characteristics	Amplifier unit		0.1% of F.S./°C^*2
Rating	Power voltage		115/230 VAC ±15 %, 50/60 Hz
	Power consumption		6VA
Environmentalresistance	Enclosure rating	Sensor head	Heat-resistant type^*3
	Operating ambient temperature		-10 to 200°C 14 to 392°F, No condensation
		Amplifier unit	0 to +50°C 32 to 122°F
Environmental resistance	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight	Sensor head		Approx 55 g (including cable)
Weight (including cord)	Amplifier unit		Approx 180 g (including the cable)
^1 The AS-425K full scale is 0.5 to 1.0 mm (0.5 mm) 0.0197" to 0.0394"(0.0197"). The temperature characteristics refer to data when the temperature is in the range of +23 to +200°C +73.4 to +392°F. ^2 When the distance between the sensor head and the target is within 50% of the measurement range. ^*3 The AH-809 is not constructed to be waterproof, so avoid using this product in an environment in which the product will be directly subjected to liquids or steam.

Keyence OP-88061 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV2-C5C Keyence

$0.00

Sold Out

Specifications

Model				SV2-C5C
Type				Motor power cable, Standard
Length				5 m 16.4'
Note				for 750 W motor

Keyence WI-C3 Keyence

$36,967.75

Only 1 unit left

Specifications

Model				WI-C3
Type				Sensor head connecting cable, Standard
Cable end				Straight
Length				3 m 9.84'

Keyence LV-N12N Keyence

$264.72

Only 10 units left

Specifications

Model		LV-N12N
Type		2 output
Output		NPN
Cable/connector		Cable
Main/Expansion unit		Expansion unit
I/O	Control outputs	2 output
	External input	1 input
	Monitor output	None
Output selection		LIGHT-ON/DARK-ON (switch-selectable)
Timer function		Timer OFF/OFF-delay timer/ON-delay timer/One-shot timer, Timer duration selectable: 1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.
Control outputs		NPN open collector 30 V, Residual voltage 1 V or less (Output current: 10 mA or less) / 2 V or less (Output current: 10 to 100 mA) (Stand-alone) 1 output max: 100 mA or less, 2 output total: 100 mA or less (Multiple connections) 1 output max: 20 mA or less
Response time		80 µs (HIGH SPEED)/250 µs (FINE)/500 µs (TURBO)/1 ms (SUPER)/4 ms (ULTRA)/16 ms (MEGA) ^*1
Monitor output		-
External input		Input time 2 ms (ON)/20 ms (OFF) or more^*2
Number of interference prevention units		Connected to other than LV-S31: 0 for HIGH SPEED; 2 for FINE/TURBO/SUPER; 4 for ULTRA/MEGA, Connected to LV-S31: 2 for FINE; 4 for TURBO/SUPER/ULTRA/MEGA^*3
Case size		H 32.6 mm 1.28" × W 9.8 mm 0.39" × L 78.7 mm 3.1"
Unit expansion		Up to 17 units can be connected in total (two-output type is treated as two units)
Protection circuit		Reverse polarity protection, Over-current protection, Surge absorber
Rating	Power voltage	24 VDC (operating voltage 10 to 30 VDC (with ripple)), Ripple (P-P) 10 % or less, Class 2 or LPS^4^5
	Power consumption	Normal: 830 mW or less (at 30 V. 30 mA at 24 V, 56 mA or less at 12 V)^6 Eco on mode: 710 mW or less (at 30 V. 26 mA at 24 V, 48 mA or less at 12 V)^6 Eco Full mode: 550 mW or less (at 30 V. 21 mA at 24 V, 40 mA or less at 12 V) ^*7
Environmental resistance	Ambient temperature	-20 to +55 °C -4 to 131 °F (No freezing)^*8
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Material	Cable	PVC
	Case	Main unit and cover material: Polycarbonate
Weight		Approx. 65 g
^1 80 µs cannot be selected when the LV-S31/S62/S63 is connected ^2 Input time is 25 ms (ON)/25 ms (OFF) when external calibration time is selected. ^3 These numbers double when "DOUBLE" is selected. ^4 Use with the over current protection device which is rated 30 V or more and not more than 1 A. ^5 To connect more than 9 units, the power voltage must be 20 V or more. ^6 Increases 30 mW (1 mA) for HIGH SPEED mode. ^7 It increases by 15% when connected to the LV-NH100/NH110/NH300. It does not include the power consumption of the load. Power consumption when expansion units are connected is the total power consumption of each amplifier unit. Example: When one main unit (LV-N11N) is connected to 2 expansion units (LV-N12N) and they are used with LV-NH100 heads in HIGH SPEED mode. (1.15 × 860 mW × 1) + (1.15 × 860 mW × 2) = 2967 mW max. ^8 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less for a unit. One or two more units connected: -20 to +55 °C -4 to 131 °F; 3 to 10 more units connected: -20 to +50 °C -4 to 122 °F; 11 to 16 more units connected: -20 to +45 °C -4 to 113 °F. When using 2-outputs, one unit is counted as two units.

Keyence AI-B160 Keyence

$1,118.79

Only 9 units left

Specifications

Model		AI-B160
Installation Distance		140 to 180 mm 5.51 to 7.09"
Detection Area	1X Zoom to 4X Zoom	13 × 13 mm 0.51 × 0.51" to 52 × 52 mm 2.05 × 2.05"^*1
	Digital Zoom	1X to 4X (17 steps) adjustment, zoom position adjustment^*1
Light Receiving Element		BW CMOS
Transmitter	Light Source	Infrared LED (850 nm)
	Lighting Method	Pulse lighting
Detection Modes		Presence check mode / Difference check mode / Feeder mode
Response Time		Switchable between 3 ms/10 ms/20 ms/50 ms/100 ms
Timer		OFF/Off-delay/On-delay/One-shot
Bank Function		Bank slots: Up to 2
Other Functions		Filter, orientation detection, anti-blur, hysteresis, mutual interference prevention, indicator LED color change, screen display orientation, statistics display, failure hold display, key lock function, I/O test
Display Panel		Organic LED (OLED) display
Languages		Japanese/English/Chinese (Simplified)
Indicators	Main Indicator	1 (green/red/orange)
	I/O Indicators	2 indicators (red): OUT1/OUT2 or IN
Input	Type	Non-voltage input/voltage input can be switched Non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA or lower (short circuit) Voltage input: Maximum input rating 30 V, ON current 18 V or higher, OFF current 0.1 mA or lower, ON current 2 mA or lower (at 30 V)
	Number of Inputs	1: IN or no input^*2
	Functions	Assignable functions: Bank/Hold (level)/Hold (edge)/Reset/External calibration/Interference prevention/Light off
Output	Type	Open collector output: Can be switched between NPN/PNP and N.O./N.C. Maximum rating: 30 V 50 mA, remaining voltage 2 V or lower
	Number of Inputs	1: OUT1 or 2: OUT1/OUT2^*2
	Functions	Assignable functions for OUT2: Error output/Judgment output 2/Interference prevention output (sync-output)
Communication Functions		IO-Link: Specification v. 1.1 (1.0)/COM2 (38.4 kbps)
Rating	Power voltage	20 to 30 VDC, including Ripple (P-P) 10 %
	Current consumption	0.3 A or less (power voltage at 20 V, excluding the output load)
Environmental resistance	Enclosure rating	IP67^*3
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of 6 directions
Materials		Main unit case: Zinc die-cast/PBT; Front cover: Acrylic (hard coating); Operation indicator: TPU; Button: POM; Display sheet: PET; Polarizing filter body: POM
Weight		Approx. 120 g (including polarized filter)
^1 When positioned in the midpoint of the installation distance range. ^2 Used with OUT2 or IN assigned to I/O line (white line or 2nd pin of M12 connector). ^*3 Except when polarized filters or dome filters are mounted.

Keyence BT-HMT1 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-42370 Keyence

$0.00

Sold Out

Specifications

Model				OP-42370
Overview				Dead space less bracket holding sensor main body from the side.
Applicable product				SL-C, SL-V (Unusable for robust sensor.)
Number included				2 pcs.
Material				SUS304
Note				2 sets are required to install protection on both the transmitter and the receiver.