1 year warranty
Ask for quote
Model |
MK-G1000PY |
|||
Touch panel console |
MK-P5 |
|||
Character height |
1 to 12 mm 0.04" to 0.47" |
|||
Maximum number of printable lines |
6 |
|||
Dot configuration (vertical) |
5, 7, 9, 10, 12, 14, 16, 24, 32 dots |
|||
Font |
Original, Serif, Sans Serif |
|||
Character types |
Alphabetic characters, numbers, katakana, hiragana, symbols, kanji (JIS levels 1 and 2), Chinese (GB2312), Latin characters, logotypes, custom characters (fonts created by users) |
|||
Barcodes |
CODE39, ITF, NW7 (Codabar), 2of5, CODE128, JAN/EAN/UPC, check digit addition function (except for 2of5) |
|||
2D codes |
QR code models 1 and 2, Micro QR, DataMatrix (ECC200) |
|||
Head distance |
15 mm 0.59" (24 dots or less), 20 mm 0.79" (25 dots or more), 35 mm 1.38" |
|||
Head direction |
All directions |
|||
Positioning guide |
Guide printing, guide beam emission |
|||
Maximum printing speed |
2525 characters/sec *1 |
|||
Print data registration |
500 settings |
|||
Functions |
Automatic calendar, expiration date, hold printing for desired time, automatic counter, 2- to 36-number system counter, automatic operation, character direction setting (90, 180, 270 degrees), double-width character, logo creation, font creation, character height and width adjustment, sensor pass filter, workpiece-stop alarm, input time constant setting, barcode comparison setting switch, automatic setting switch at print completion (group printing), terminal block monitor, communication buffer, error level change, CV-X link, IV2 link, MK link, smart startup/shutdown/recovery (when connected to MK Dock), smart program change, operation report (when connected to Operation Assist Camera), Event Recording (when connected to Operation Assist Camera), access rights configuration, Web Console *2, E-mail notifications, Customization functions |
|||
Maintenance functions |
Automatic nozzle cleaning, ink draining, internal cleaning, jet operation (nozzle and gutter suction, intermittent spraying), error display, error history, maintenance history, internal path monitor, maintenance guidance, error clearing guidance, auto-shower, sleep mode (when connected to MK Dock) , path recovery |
|||
Input (NPN/PNP) |
Printing start, encoder (A, B), setting number selection, setting number switching, printing start disabling, printing stop, printing direction switching, counter/group reset, counter increase (startup), counter decrease (shut down), error clearing, head detection input, Event Recording input (when connected to Operation Assist Camera) |
|||
Output (NPN/PNP) |
Error, caution, printing ready, setting switch ready, busy (printing), printing complete, counter complete (image capture trigger), service power supply (24 V) |
|||
Console display language |
Japanese, English, Chinese, Thai, German, French, Italian, Spanish, Portuguese, Dutch, Polish, Czech, Hungarian, Slovenian |
|||
Interface |
RS-232C, USB 2.0*3, Ethernet (100Base-TX/10Base-T) |
|||
Print head cable length |
4 m 13.1' |
|||
Console cable length | ||||
Operation Assist Camera cable length |
2.8 m 9.2' *4 |
|||
MK Dock cable length |
4 m 13.1' *4 |
|||
Ratings |
Power voltage |
Single-phase, 100 to 240 VAC ±10%, 50/60 Hz |
||
Power consumption |
When stopped: 40 W / During printing: 60 W |
|||
Environmental resistance |
Ambient temperature |
5 to 40°C 41 to 104°F |
||
Ambient temperature for storage |
-10 to +60°C 14 to 140°F (No freezing) |
|||
Relative humidity |
0 to 90% RH |
|||
Housing |
Stainless steel |
|||
Enclosure rating |
IP55 *5 |
|||
Drop resistance |
Compliant with MIL-STD-810G Change 1 Method 516.7 Procedure IV Transit Drop *6 |
|||
Weight |
Main unit |
31.5 kg |
||
Console |
1.7 kg (with jacket: 2.1 kg) |
|||
Operation Assist Camera |
0.25 kg *4 |
|||
MK Dock |
MK-D1A: 1.0 kg, MK-D1B: 1.15 kg *4 |
|||
Dimensions |
465 × 388 × 499 mm 18.31" × 15.28" × 19.65" (W × D × H) |
|||
*1 With 5-dot character, 1-line printing with 1-dot character spacing. | ||||
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Ask for quote
Trusted By
Need More?
Contact Us
we're here to support your business.
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator