LJ-S8002 Keyence

Specifications

Model		LJ-S8002
Head input		Up to two LJ-S8000 Series head units * When using two units, heads A and B must be the same model.
Number of registered inspection settings		Up to 1000 settings (depending on SD card capacity and setting contents) for each of SD card 1 and SD card 2; External switching possible
Master profile / number of reference images		Up to 400 per setting (depending on SD card capacity)
Memory card		• SD card slot × 2 • Supports OP-87133 (512 MB), CA-SD1G (1 GB), CA-SD4G (4 GB; Equipped as standard for SD1 slot), and CA-SD16G (16 GB)
Number of tools		Up to 100 per setting
Interface	Control input	20 points (Input terminal block: 5 points, Parallel I/O: 15 points)
	Control output	• 28 points (Output terminal block: 6 points, Parallel I/O: 22 points) • Photo MOSFET^*1
	RS-232C	• Numerical value output and control I/O (When in use, PLC Link using the RS-232C port cannot be used) • Supports baud rates of up to 230400 bps
	PLC link	• Numerical value output and control I/O using Ethernet or RS-232C ports (Cannot be used with EtherNet/IP™; When using an RS-232C port, cannot be used with RS-232C no-procedure communication)
	Ethernet	• Numerical value output and control I/O • In addition to the functions above, uploading/downloading inspection settings, performing various simulations, and sending/receiving images and other data, and using remote desktop connections are possible via KEYENCE PC application software. • Supports FTP client, FTP server, VNC server (for non-PC clients, only monitor screen display is supported), and BOOTP functions supported • 1000BASE-T/100BASE-TX/10BASE-T • Supports jumbo frames
	USB	• In addition to numerical value output, uploading/downloading inspection settings, performing various simulations, and sending/receiving images and other data, and using remote desktop connections are possible via KEYENCE PC application software. • USB 2.0 only
	EtherNet/IP^TM	• Numerical value I/O and control I/O using the Ethernet port or optional EtherNet/IP™ unit CB-NEP20E (Cannot be used with PLC Link, PROFINET, or EtherCAT®) • Supports cyclic communication (max. 1436 bytes) and message communication • Maximum number of connections: 32 (Ethernet port) / 1: Exclusive Owner, 4: Input Only (CB-NEP20E) • Complies with Version CT19.1 (Ethernet port) / CT19.1 (CB-NEP20E) conformance tests
	PROFINET	• Can input/output numerical values and perform control I/O using the Ethernet port or the optional PROFINET unit CB-NPN20EA (Cannot be used with PLC Link, EtherNet/IP™, and EtherCAT®) • Supports cyclic communication (max. 1408 bytes) (Ethernet port) / 1252 bytes (CB-NPN20EA) • Supports acyclic communication (recorded data) • Complies with Conformance Class A (Ethernet port) / C (CB-NPN20EA)
	EtherCAT^®	• Numerical value output and control I/O using optional EtherCAT® unit CB-NEC20E (Cannot be used with PLC Link, EtherNet/IP™, or PROFINET) • Supports cyclic communication (process data object communication) (Input: Max. 536 bytes / Output: Max. 532 bytes) • Supports acyclic communication (mailbox communication) • Supports CoE • Explicit device identification • Complies with Version 2.5.0 conformance test
	Mouse	Various menus can be controlled using the dedicated mouse (included with the controller)
	SNTP	Automatic correction of controller date and time when connected to an SNTP server
	USB HDD	Images and other data can be output by connecting an HDD (2 TB max.) to the dedicated USB port (USB 3.0-compliant, bus-powered, rated output: 900 mA)
	Monitor output	Analog RGB output, XGA 1024 × 768 (24-bit color, 60 Hz)
Cooling fan		Available
Language		Switchable between English, Japanese, and Chinese (Simplified)
Ratings	Power voltage	24 VDC ±10%
	Maximum current consumption	Max. 2.5 A (Typ. 28 W)
Environmental resistance	Ambient temperature	0 to 45°C 32.0°F to 113.0°F (DIN rail mounting) / 0 to 40°C 32.0°F to 104.0°F (Base surface mounting)
	Relative humidity	85% RH or less (no condensation)
Weight		Approx. 2200 g 4.85 lb
^*1 Positive common connection for NPN input devices and negative common connection for PNP input devices supported.

Price on request
Ask for quote

Specifications

Model		LJ-S8002
Head input		Up to two LJ-S8000 Series head units * When using two units, heads A and B must be the same model.
Number of registered inspection settings		Up to 1000 settings (depending on SD card capacity and setting contents) for each of SD card 1 and SD card 2; External switching possible
Master profile / number of reference images		Up to 400 per setting (depending on SD card capacity)
Memory card		• SD card slot × 2 • Supports OP-87133 (512 MB), CA-SD1G (1 GB), CA-SD4G (4 GB; Equipped as standard for SD1 slot), and CA-SD16G (16 GB)
Number of tools		Up to 100 per setting
Interface	Control input	20 points (Input terminal block: 5 points, Parallel I/O: 15 points)
	Control output	• 28 points (Output terminal block: 6 points, Parallel I/O: 22 points) • Photo MOSFET^*1
	RS-232C	• Numerical value output and control I/O (When in use, PLC Link using the RS-232C port cannot be used) • Supports baud rates of up to 230400 bps
	PLC link	• Numerical value output and control I/O using Ethernet or RS-232C ports (Cannot be used with EtherNet/IP™; When using an RS-232C port, cannot be used with RS-232C no-procedure communication)
	Ethernet	• Numerical value output and control I/O • In addition to the functions above, uploading/downloading inspection settings, performing various simulations, and sending/receiving images and other data, and using remote desktop connections are possible via KEYENCE PC application software. • Supports FTP client, FTP server, VNC server (for non-PC clients, only monitor screen display is supported), and BOOTP functions supported • 1000BASE-T/100BASE-TX/10BASE-T • Supports jumbo frames
	USB	• In addition to numerical value output, uploading/downloading inspection settings, performing various simulations, and sending/receiving images and other data, and using remote desktop connections are possible via KEYENCE PC application software. • USB 2.0 only
	EtherNet/IP^TM	• Numerical value I/O and control I/O using the Ethernet port or optional EtherNet/IP™ unit CB-NEP20E (Cannot be used with PLC Link, PROFINET, or EtherCAT®) • Supports cyclic communication (max. 1436 bytes) and message communication • Maximum number of connections: 32 (Ethernet port) / 1: Exclusive Owner, 4: Input Only (CB-NEP20E) • Complies with Version CT19.1 (Ethernet port) / CT19.1 (CB-NEP20E) conformance tests
	PROFINET	• Can input/output numerical values and perform control I/O using the Ethernet port or the optional PROFINET unit CB-NPN20EA (Cannot be used with PLC Link, EtherNet/IP™, and EtherCAT®) • Supports cyclic communication (max. 1408 bytes) (Ethernet port) / 1252 bytes (CB-NPN20EA) • Supports acyclic communication (recorded data) • Complies with Conformance Class A (Ethernet port) / C (CB-NPN20EA)
	EtherCAT^®	• Numerical value output and control I/O using optional EtherCAT® unit CB-NEC20E (Cannot be used with PLC Link, EtherNet/IP™, or PROFINET) • Supports cyclic communication (process data object communication) (Input: Max. 536 bytes / Output: Max. 532 bytes) • Supports acyclic communication (mailbox communication) • Supports CoE • Explicit device identification • Complies with Version 2.5.0 conformance test
	Mouse	Various menus can be controlled using the dedicated mouse (included with the controller)
	SNTP	Automatic correction of controller date and time when connected to an SNTP server
	USB HDD	Images and other data can be output by connecting an HDD (2 TB max.) to the dedicated USB port (USB 3.0-compliant, bus-powered, rated output: 900 mA)
	Monitor output	Analog RGB output, XGA 1024 × 768 (24-bit color, 60 Hz)
Cooling fan		Available
Language		Switchable between English, Japanese, and Chinese (Simplified)
Ratings	Power voltage	24 VDC ±10%
	Maximum current consumption	Max. 2.5 A (Typ. 28 W)
Environmental resistance	Ambient temperature	0 to 45°C 32.0°F to 113.0°F (DIN rail mounting) / 0 to 40°C 32.0°F to 104.0°F (Base surface mounting)
	Relative humidity	85% RH or less (no condensation)
Weight		Approx. 2200 g 4.85 lb
^*1 Positive common connection for NPN input devices and negative common connection for PNP input devices supported.

Model		LJ-S8002
Head input		Up to two LJ-S8000 Series head units * When using two units, heads A and B must be the same model.
Number of registered inspection settings		Up to 1000 settings (depending on SD card capacity and setting contents) for each of SD card 1 and SD card 2; External switching possible
Master profile / number of reference images		Up to 400 per setting (depending on SD card capacity)
Memory card		• SD card slot × 2 • Supports OP-87133 (512 MB), CA-SD1G (1 GB), CA-SD4G (4 GB; Equipped as standard for SD1 slot), and CA-SD16G (16 GB)
Number of tools		Up to 100 per setting
Interface	Control input	20 points (Input terminal block: 5 points, Parallel I/O: 15 points)
	Control output	• 28 points (Output terminal block: 6 points, Parallel I/O: 22 points) • Photo MOSFET^*1
	RS-232C	• Numerical value output and control I/O (When in use, PLC Link using the RS-232C port cannot be used) • Supports baud rates of up to 230400 bps
	PLC link	• Numerical value output and control I/O using Ethernet or RS-232C ports (Cannot be used with EtherNet/IP™; When using an RS-232C port, cannot be used with RS-232C no-procedure communication)
	Ethernet	• Numerical value output and control I/O • In addition to the functions above, uploading/downloading inspection settings, performing various simulations, and sending/receiving images and other data, and using remote desktop connections are possible via KEYENCE PC application software. • Supports FTP client, FTP server, VNC server (for non-PC clients, only monitor screen display is supported), and BOOTP functions supported • 1000BASE-T/100BASE-TX/10BASE-T • Supports jumbo frames
	USB	• In addition to numerical value output, uploading/downloading inspection settings, performing various simulations, and sending/receiving images and other data, and using remote desktop connections are possible via KEYENCE PC application software. • USB 2.0 only
	EtherNet/IP^TM	• Numerical value I/O and control I/O using the Ethernet port or optional EtherNet/IP™ unit CB-NEP20E (Cannot be used with PLC Link, PROFINET, or EtherCAT®) • Supports cyclic communication (max. 1436 bytes) and message communication • Maximum number of connections: 32 (Ethernet port) / 1: Exclusive Owner, 4: Input Only (CB-NEP20E) • Complies with Version CT19.1 (Ethernet port) / CT19.1 (CB-NEP20E) conformance tests
	PROFINET	• Can input/output numerical values and perform control I/O using the Ethernet port or the optional PROFINET unit CB-NPN20EA (Cannot be used with PLC Link, EtherNet/IP™, and EtherCAT®) • Supports cyclic communication (max. 1408 bytes) (Ethernet port) / 1252 bytes (CB-NPN20EA) • Supports acyclic communication (recorded data) • Complies with Conformance Class A (Ethernet port) / C (CB-NPN20EA)
	EtherCAT^®	• Numerical value output and control I/O using optional EtherCAT® unit CB-NEC20E (Cannot be used with PLC Link, EtherNet/IP™, or PROFINET) • Supports cyclic communication (process data object communication) (Input: Max. 536 bytes / Output: Max. 532 bytes) • Supports acyclic communication (mailbox communication) • Supports CoE • Explicit device identification • Complies with Version 2.5.0 conformance test
	Mouse	Various menus can be controlled using the dedicated mouse (included with the controller)
	SNTP	Automatic correction of controller date and time when connected to an SNTP server
	USB HDD	Images and other data can be output by connecting an HDD (2 TB max.) to the dedicated USB port (USB 3.0-compliant, bus-powered, rated output: 900 mA)
	Monitor output	Analog RGB output, XGA 1024 × 768 (24-bit color, 60 Hz)
Cooling fan		Available
Language		Switchable between English, Japanese, and Chinese (Simplified)
Ratings	Power voltage	24 VDC ±10%
	Maximum current consumption	Max. 2.5 A (Typ. 28 W)
Environmental resistance	Ambient temperature	0 to 45°C 32.0°F to 113.0°F (DIN rail mounting) / 0 to 40°C 32.0°F to 104.0°F (Base surface mounting)
	Relative humidity	85% RH or less (no condensation)
Weight		Approx. 2200 g 4.85 lb
^*1 Positive common connection for NPN input devices and negative common connection for PNP input devices supported.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Need More?

Contact Us

You can call, email, or chat us
we're here to support your business.

(847) 242-1595

Chat

support@plc-direct.com

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator