1 year warranty
The Schneider Electric LC1G330KUEN is a TeSys Giga high power contactor designed for demanding industrial motor control and power switching applications. It features a 3-pole configuration (3NO) rated for AC-3 duty up to 330A at 440V, suitable for loads up to 200kW. The contactor incorporates a wide-band 100-250V AC/DC low consumption electronic coil and an embedded 1NO+1NC auxiliary contact block. Built for harsh environments, it operates reliably from -25°C to 60°C with maximum operating rates up to 600 cycles per hour. Standard features include Contact Wear Diagnosis (CWD) with health and alarm indicators, replaceable switching modules for extended service life, and IP2X front face protection. The contactor offers 5 million mechanical cycles durability and can be mounted in all quadrants without derating up to 3000m altitude.
Item Details
- Brand Name: Schneider Electric
- Manufacturer: Schneider Electric
- Item Type Name: High Power Contactor
- Product Family / Series: TeSys Giga
- Series: LC1G
- Device Short Name: LC1G
Product Specifications
- rated_operational_current: 330 A at 40°C
- rated_operational_voltage: ≤1000 V AC 50/60 Hz, ≤460 V DC
- utilization_category: AC-1, AC-3, AC-3e, AC-4, AC-5a, AC-5b, AC-6a, AC-6b, AC-8a, AC-8b, DC-1, DC-3, DC-5
- motor_power_rating: 200 kW at 440V (AC-3)
- poles: 3-pole (3NO)
- auxiliary_contacts: 1NO + 1NC
- coil_voltage: 100-250 V AC/DC wide band
- coil_consumption_inrush: 700 VA
- coil_consumption_hold_in: 15.0 VA
- coil_power_consumption: 30 W inrush, 16 W hold-in
- rated_breaking_capacity: 2940 A at 440V
- mechanical_durability: 5 million cycles
- maximum_operating_rate: 600 cycles/hour
- rated_impulse_withstand_voltage: 8 kV
- operating_temperature: -25°C to 60°C
- frequency: 50/60 Hz
- ip_protection: IP2X front face
- overvoltage_category: III
Additional Details
- Country of Origin*: CN
- Certifications / Approvals: CB Scheme, CCC, CULus, EAC, CE, UKCA, EU-RO-MR (DNV-GL), IEC 60529, VDE 0106
- Features: Contact Wear Diagnosis (CWD), replaceable switching module, bidirectional peak limiting coil technology, bolted power connections, spring terminal control connections
- Mounting: Plate mounting, all quadrants
- Altitude Derating: No derating up to 3000m
*Country of origin may vary.
Measurements
- Weight: 7.473 kg (gross)
- Dimensions: 290 mm H x 140 mm W x 209 mm D
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Trusted By
Need More?
Contact Us
we're here to support your business.
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator