1 year warranty
The Schneider Electric LC1D50B7 is a three-pole IEC contactor from the TeSys Deca product family, designed for non-reversing motor control and resistive load switching applications. This standard contactor is rated for 50 A operational current under AC-3 conditions at up to 690 V AC and 80 A for AC-1 resistive loads. It features a 24 V AC coil operating at 50/60 Hz with screw clamp terminals for both power and control connections. The device includes built-in auxiliary contacts (1NO+1NC) and offers compatibility with additional LADN auxiliary contact blocks. Suitable for motor control up to 40 HP at 480 VAC and certified to multiple international standards including IEC, UL, CSA, CCC, and Marine, it achieves up to 100 kA SCCR when properly coordinated with circuit breakers. Compact design with 75 mm width allows DIN rail or screw mounting.
Item Details
- Brand Name: Schneider Electric
- Manufacturer: Schneider Electric
- Item Type Name: IEC Contactor
- Product Family / Series: TeSys Deca
- Product Line: TeSys D
- Device Short Name: LC1D
- Contactor Application: Resistive load, Motor control
- Contact Type: Non-reversing
- Pole Configuration: 3-Pole
- Contact Configuration: 3NO
Product Specifications
- rated_operational_current_AC3: 50 A at 440 V AC
- rated_operational_current_AC1: 80 A at 440 V AC
- rated_operational_voltage: 690 V AC 25-400 Hz
- coil_voltage: 24 V AC
- coil_frequency: 50/60 Hz
- power_rating_230V: 15 HP
- power_rating_480V: 40 HP
- power_rating_600V: 40 HP
- power_rating_400V: 22 kW
- utilization_category: AC-1, AC-2, AC-3e
- auxiliary_contacts_builtin: 1NO + 1NC
- coil_consumption_inrush: 140/160 VA
- coil_consumption_holdin: 13/15 VA
- power_factor_inrush: 0.75
- power_factor_holdin: 0.3
- SCCR: Up to 100 kA
- mechanical_life: 6000000 cycles
- operating_rate: Up to 3600 cycles/hour
- connection_type_power: Screw clamp terminals
- connection_type_control: Screw clamp terminals
- mounting_type: DIN rail or screw fixing
- enclosure_rating: IP2X
Additional Details
- Certifications / Approvals: IEC 60947, UL, CSA, CCC, EAC, Marine
- Operating Temperature: -5 to 60 °C
Measurements
- Dimensions: 127 mm H x 75 mm W x 119 mm D
- Width: 75 mm
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Trusted By
Need More?
Contact Us
we're here to support your business.
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator