KV-XCM02 Keyence

Specifications

Model				KV-XCM02
General specifications	Power voltage			System configuration using a KV-5000/3000 Series expansion unit: 24 VDC (±10%) System configuration using only a KV‑8000/7000 Series expansion unit: 24 VDC (−15%/+20%) ^*1
	Operating ambient temperature			System configuration using a KV-5000/3000 Series expansion unit: 0 to +50°C 32 to 122°F (No freezing) System configuration using only a KV‑8000/7000 Series expansion unit: 0 to +55°C 32 to 131°F (No freezing) ^2^3
	Operating ambient humidity			System configuration using a KV-5000/3000 Series expansion unit: 10 to 95% RH (No condensation) System configuration using only a KV‑8000/7000 Series expansion unit: 5 to 95% RH (No condensation) ^*2
	Storage ambient temperature			System configuration using a KV-5000/3000 Series expansion unit: −20 to +70°C -4 to +158°F System configuration using only a KV‑8000/7000 Series expansion unit: −25 to +75°C -13 to +167°F ^*2
	Storage relative humidity			System configuration using a KV-5000/3000 Series expansion unit: 10 to 95% RH (No condensation) System configuration using only a KV‑8000/7000 Series expansion unit: 5 to 95% RH (No condensation) ^*2
	Operating environment			No dust or corrosive gas
	Operating altitude			2000 m 6561.7' or less
	Noise immunity			1500 Vp-p or more; Pulse duration: 1 μs, 50 ns (based on noise simulator); IEC standard-compliant (IEC 61000-4-2/3/4/6)
	Withstand voltage			1500 VAC for one minute (between the power terminals and the I/O terminals, and between the external terminals and the case)
	Insulation resistance			50 MΩ or more (between the power terminals and the I/O terminals and between the external terminals and the case, with 500 VDC megohmmeter)
	Vibration resistance	Intermittent vibration	Frequency 5 to 9 Hz	Half amplitude 3.5 mm 0.14"^*4
			Frequency 9 to 150 Hz	Acceleration 9.8 m/s² 32.2'/s²^*4
		Continuous vibration	Frequency 5 to 9 Hz	Half amplitude 1.75 mm 0.07"^*4
			Frequency 9 to 150 Hz	Acceleration 4.9 m/s² 16.1'/s²^*4
	Shock resistance			Acceleration: 150 m/s² 492.1'/s², Application time: 11 ms, 2 times in each of the X, Y, and Z directions
	Pollution degree			2
Common specifications	Connectable CPU unit			KV-X Series/KV-8000A
	Max. number of connectable units			14
	Connection interface			RJ-45 8-position modular connector × 2 ports
	Transmission rate			10BASE-T: 10 Mbps 100BASE-TX: 100 Mbps 1000BASE-T: 1000 Mbps ^*5
	Transmission media			10BASE-T: Category 3 or higher UTP or STP (STP is recommended) 100BASE-TX: Category 5 or higher UTP or STP (STP is recommended) 1000BASE-T: Category 5e or higher UTP or STP (double-shielded STP is recommended) ^*6
	Maximum cable length			100 m 328.1'^*7
	Maximum number of connectable hubs			10BASE-T: 4 100BASE-TX: 2 1000BASE-T: 1 ^*8
	Ethernet functions			Socket communication, FTP server, FTP client, upper link communication, etc.
	Internal current consumption			200 mA or less
	Weight			Approx. 190 g 6.71 oz
Compatibility specifications	Supported databases			Microsoft SQL Server, PostgreSQL, MariaDB, MySQL, Oracle Database^*9
	Maximum number of connections			4
	Supported SQL			INSERT^10, UPDATE, SELECT^10, DELETE, TRUNCATE, Stored procedure/Stored function execution
	Maximum number of supported columns			1024 (Microsoft SQL Server); 1000 (PostgreSQL, MariaDB, MySQL, Oracle Database)
	Maximum record storage size			200000 bytes^*11
	Buffer retransmission function			Function that buffers SQL statements if communication fails to enable retransmission when communication is restored Maximum buffer capacity: 1 GB per connection (SD card required)
^1 Supplied via the CPU unit or expansion unit. ^2 Guaranteed range in which the system can be used. ^3 Specified according to the temperature in the control panel on the lower side of the unit. ^4 Compliant with JIS B 3502 and IEC 61131-2, 10 times in each of the X, Y, and Z directions (for 100 min.) ^5 10 Mbps/100 Mbps/1000 Mbps MDI/MDI-X automatic switching function supported. ^6 STP = Shielded twisted pair cable; UTP = Unshielded twisted pair cable ^7 The maximum cable length refers to the distance between the KV-XCM02 and the Ethernet switch. ^8 The maximum number is not limited when an Ethernet switch is used. ^9 Refer to the manual for supported database versions. ^10 Multi-extraction/insertion supported. ^*11 This is the maximum size of the data saving area reserved for CPU unit devices.

Est. delivery between and

$1,667.85

1-year warranty

FREE WORDWIDE SHIPPING

Condition:

Sealed Surplus

SKU: KV-XCM02-Sealed

Sold out

$0.00

Never Used Surplus

SKU: KV-XCM02

5 verified stock

$1,667.85

Used

SKU: KV-XCM02-Used

1 verified stock

$1,202.03

Variant

Quantity:

Need More?

Specifications

Model				KV-XCM02
General specifications	Power voltage			System configuration using a KV-5000/3000 Series expansion unit: 24 VDC (±10%) System configuration using only a KV‑8000/7000 Series expansion unit: 24 VDC (−15%/+20%) ^*1
	Operating ambient temperature			System configuration using a KV-5000/3000 Series expansion unit: 0 to +50°C 32 to 122°F (No freezing) System configuration using only a KV‑8000/7000 Series expansion unit: 0 to +55°C 32 to 131°F (No freezing) ^2^3
	Operating ambient humidity			System configuration using a KV-5000/3000 Series expansion unit: 10 to 95% RH (No condensation) System configuration using only a KV‑8000/7000 Series expansion unit: 5 to 95% RH (No condensation) ^*2
	Storage ambient temperature			System configuration using a KV-5000/3000 Series expansion unit: −20 to +70°C -4 to +158°F System configuration using only a KV‑8000/7000 Series expansion unit: −25 to +75°C -13 to +167°F ^*2
	Storage relative humidity			System configuration using a KV-5000/3000 Series expansion unit: 10 to 95% RH (No condensation) System configuration using only a KV‑8000/7000 Series expansion unit: 5 to 95% RH (No condensation) ^*2
	Operating environment			No dust or corrosive gas
	Operating altitude			2000 m 6561.7' or less
	Noise immunity			1500 Vp-p or more; Pulse duration: 1 μs, 50 ns (based on noise simulator); IEC standard-compliant (IEC 61000-4-2/3/4/6)
	Withstand voltage			1500 VAC for one minute (between the power terminals and the I/O terminals, and between the external terminals and the case)
	Insulation resistance			50 MΩ or more (between the power terminals and the I/O terminals and between the external terminals and the case, with 500 VDC megohmmeter)
	Vibration resistance	Intermittent vibration	Frequency 5 to 9 Hz	Half amplitude 3.5 mm 0.14"^*4
			Frequency 9 to 150 Hz	Acceleration 9.8 m/s² 32.2'/s²^*4
		Continuous vibration	Frequency 5 to 9 Hz	Half amplitude 1.75 mm 0.07"^*4
			Frequency 9 to 150 Hz	Acceleration 4.9 m/s² 16.1'/s²^*4
	Shock resistance			Acceleration: 150 m/s² 492.1'/s², Application time: 11 ms, 2 times in each of the X, Y, and Z directions
	Pollution degree			2
Common specifications	Connectable CPU unit			KV-X Series/KV-8000A
	Max. number of connectable units			14
	Connection interface			RJ-45 8-position modular connector × 2 ports
	Transmission rate			10BASE-T: 10 Mbps 100BASE-TX: 100 Mbps 1000BASE-T: 1000 Mbps ^*5
	Transmission media			10BASE-T: Category 3 or higher UTP or STP (STP is recommended) 100BASE-TX: Category 5 or higher UTP or STP (STP is recommended) 1000BASE-T: Category 5e or higher UTP or STP (double-shielded STP is recommended) ^*6
	Maximum cable length			100 m 328.1'^*7
	Maximum number of connectable hubs			10BASE-T: 4 100BASE-TX: 2 1000BASE-T: 1 ^*8
	Ethernet functions			Socket communication, FTP server, FTP client, upper link communication, etc.
	Internal current consumption			200 mA or less
	Weight			Approx. 190 g 6.71 oz
Compatibility specifications	Supported databases			Microsoft SQL Server, PostgreSQL, MariaDB, MySQL, Oracle Database^*9
	Maximum number of connections			4
	Supported SQL			INSERT^10, UPDATE, SELECT^10, DELETE, TRUNCATE, Stored procedure/Stored function execution
	Maximum number of supported columns			1024 (Microsoft SQL Server); 1000 (PostgreSQL, MariaDB, MySQL, Oracle Database)
	Maximum record storage size			200000 bytes^*11
	Buffer retransmission function			Function that buffers SQL statements if communication fails to enable retransmission when communication is restored Maximum buffer capacity: 1 GB per connection (SD card required)
^1 Supplied via the CPU unit or expansion unit. ^2 Guaranteed range in which the system can be used. ^3 Specified according to the temperature in the control panel on the lower side of the unit. ^4 Compliant with JIS B 3502 and IEC 61131-2, 10 times in each of the X, Y, and Z directions (for 100 min.) ^5 10 Mbps/100 Mbps/1000 Mbps MDI/MDI-X automatic switching function supported. ^6 STP = Shielded twisted pair cable; UTP = Unshielded twisted pair cable ^7 The maximum cable length refers to the distance between the KV-XCM02 and the Ethernet switch. ^8 The maximum number is not limited when an Ethernet switch is used. ^9 Refer to the manual for supported database versions. ^10 Multi-extraction/insertion supported. ^*11 This is the maximum size of the data saving area reserved for CPU unit devices.

Model				KV-XCM02
General specifications	Power voltage			System configuration using a KV-5000/3000 Series expansion unit: 24 VDC (±10%) System configuration using only a KV‑8000/7000 Series expansion unit: 24 VDC (−15%/+20%) ^*1
	Operating ambient temperature			System configuration using a KV-5000/3000 Series expansion unit: 0 to +50°C 32 to 122°F (No freezing) System configuration using only a KV‑8000/7000 Series expansion unit: 0 to +55°C 32 to 131°F (No freezing) ^2^3
	Operating ambient humidity			System configuration using a KV-5000/3000 Series expansion unit: 10 to 95% RH (No condensation) System configuration using only a KV‑8000/7000 Series expansion unit: 5 to 95% RH (No condensation) ^*2
	Storage ambient temperature			System configuration using a KV-5000/3000 Series expansion unit: −20 to +70°C -4 to +158°F System configuration using only a KV‑8000/7000 Series expansion unit: −25 to +75°C -13 to +167°F ^*2
	Storage relative humidity			System configuration using a KV-5000/3000 Series expansion unit: 10 to 95% RH (No condensation) System configuration using only a KV‑8000/7000 Series expansion unit: 5 to 95% RH (No condensation) ^*2
	Operating environment			No dust or corrosive gas
	Operating altitude			2000 m 6561.7' or less
	Noise immunity			1500 Vp-p or more; Pulse duration: 1 μs, 50 ns (based on noise simulator); IEC standard-compliant (IEC 61000-4-2/3/4/6)
	Withstand voltage			1500 VAC for one minute (between the power terminals and the I/O terminals, and between the external terminals and the case)
	Insulation resistance			50 MΩ or more (between the power terminals and the I/O terminals and between the external terminals and the case, with 500 VDC megohmmeter)
	Vibration resistance	Intermittent vibration	Frequency 5 to 9 Hz	Half amplitude 3.5 mm 0.14"^*4
			Frequency 9 to 150 Hz	Acceleration 9.8 m/s² 32.2'/s²^*4
		Continuous vibration	Frequency 5 to 9 Hz	Half amplitude 1.75 mm 0.07"^*4
			Frequency 9 to 150 Hz	Acceleration 4.9 m/s² 16.1'/s²^*4
	Shock resistance			Acceleration: 150 m/s² 492.1'/s², Application time: 11 ms, 2 times in each of the X, Y, and Z directions
	Pollution degree			2
Common specifications	Connectable CPU unit			KV-X Series/KV-8000A
	Max. number of connectable units			14
	Connection interface			RJ-45 8-position modular connector × 2 ports
	Transmission rate			10BASE-T: 10 Mbps 100BASE-TX: 100 Mbps 1000BASE-T: 1000 Mbps ^*5
	Transmission media			10BASE-T: Category 3 or higher UTP or STP (STP is recommended) 100BASE-TX: Category 5 or higher UTP or STP (STP is recommended) 1000BASE-T: Category 5e or higher UTP or STP (double-shielded STP is recommended) ^*6
	Maximum cable length			100 m 328.1'^*7
	Maximum number of connectable hubs			10BASE-T: 4 100BASE-TX: 2 1000BASE-T: 1 ^*8
	Ethernet functions			Socket communication, FTP server, FTP client, upper link communication, etc.
	Internal current consumption			200 mA or less
	Weight			Approx. 190 g 6.71 oz
Compatibility specifications	Supported databases			Microsoft SQL Server, PostgreSQL, MariaDB, MySQL, Oracle Database^*9
	Maximum number of connections			4
	Supported SQL			INSERT^10, UPDATE, SELECT^10, DELETE, TRUNCATE, Stored procedure/Stored function execution
	Maximum number of supported columns			1024 (Microsoft SQL Server); 1000 (PostgreSQL, MariaDB, MySQL, Oracle Database)
	Maximum record storage size			200000 bytes^*11
	Buffer retransmission function			Function that buffers SQL statements if communication fails to enable retransmission when communication is restored Maximum buffer capacity: 1 GB per connection (SD card required)
^1 Supplied via the CPU unit or expansion unit. ^2 Guaranteed range in which the system can be used. ^3 Specified according to the temperature in the control panel on the lower side of the unit. ^4 Compliant with JIS B 3502 and IEC 61131-2, 10 times in each of the X, Y, and Z directions (for 100 min.) ^5 10 Mbps/100 Mbps/1000 Mbps MDI/MDI-X automatic switching function supported. ^6 STP = Shielded twisted pair cable; UTP = Unshielded twisted pair cable ^7 The maximum cable length refers to the distance between the KV-XCM02 and the Ethernet switch. ^8 The maximum number is not limited when an Ethernet switch is used. ^9 Refer to the manual for supported database versions. ^10 Multi-extraction/insertion supported. ^*11 This is the maximum size of the data saving area reserved for CPU unit devices.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Need More?

Contact Us

You can call, email, or chat us
we're here to support your business.

(847) 242-1595

Chat

support@plc-direct.com

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator