BMH1901P32F2A Schneider

BMH1901P32F2A Schneider

Main

Characteristic Value(s)
Device short name BMH
Product or Component Type Servo motor
Maximum mechanical speed 4000 rpm
Continuous stall torque 265.5 lbf.in (30 N.m) LXM32.D72N4 24 A, 400 V, three phase
265.5 lbf.in (30 N.m) LXM32.D72N4 24 A, 480 V, three phase
265.5 lbf.in (30 N.m) LXM32MD85N4 32 A, 400 V, three phase
265.5 lbf.in (30 N.m) LXM32MD85N4 32 A, 480 V, three phase
265.5 lbf.in (30 N.m) LXM32MC10N4 40 A, 400 V, three phase
265.5 lbf.in (30 N.m) LXM32MC10N4 40 A, 480 V, three phase
Peak stall torque 687.7 lbf.in (77.7 N.m) LXM32.D72N4 24 A, 400 V, three phase
687.7 lbf.in (77.7 N.m) LXM32.D72N4 24 A, 480 V, three phase
766.5 lbf.in (86.6 N.m) LXM32MD85N4 32 A, 400 V, three phase
766.5 lbf.in (86.6 N.m) LXM32MD85N4 32 A, 480 V, three phase
793.9 lbf.in (89.7 N.m) LXM32MC10N4 40 A, 400 V, three phase
793.9 lbf.in (89.7 N.m) LXM32MC10N4 40 A, 480 V, three phase
Nominal output power 4800 W LXM32.D72N4 24 A, 400 V, three phase
4800 W LXM32.D72N4 24 A, 480 V, three phase
5180 W LXM32MD85N4 32 A, 400 V, three phase
5180 W LXM32MD85N4 32 A, 480 V, three phase
5180 W LXM32MC10N4 40 A, 400 V, three phase
5180 W LXM32MC10N4 40 A, 480 V, three phase
Nominal torque 162.9 lbf.in (18.4 N.m) LXM32.D72N4 24 A, 400 V, three phase
162.9 lbf.in (18.4 N.m) LXM32.D72N4 24 A, 480 V, three phase
146.04 lbf.in (16.5 N.m) LXM32MD85N4 32 A, 400 V, three phase
146.04 lbf.in (16.5 N.m) LXM32MD85N4 32 A, 480 V, three phase
146.04 lbf.in (16.5 N.m) LXM32MC10N4 40 A, 400 V, three phase
146.04 lbf.in (16.5 N.m) LXM32MC10N4 40 A, 480 V, three phase
Nominal speed 2500 rpm LXM32.D72N4 24 A, 400 V, three phase
2500 rpm LXM32.D72N4 24 A, 480 V, three phase
3000 rpm LXM32MD85N4 32 A, 400 V, three phase
3000 rpm LXM32MD85N4 32 A, 480 V, three phase
3000 rpm LXM32MC10N4 40 A, 400 V, three phase
3000 rpm LXM32MC10N4 40 A, 480 V, three phase
Product compatibility LXM32.D72N4 400...480 V three phase
Shaft end Keyed
IP Degree of Protection IP65 standard
IP67 with IP67 kit
Speed feedback resolution 131072 points/turn x 4096 turns
Holding brake With
Mounting Support International standard flange
Electrical Connection Rotatable right-angled connectors

Complementary

Characteristic Value(s)
Range Compatibility Lexium 32
[Us] rated supply voltage 480 V
Phase Three phase
Continuous stall current 23.2 A
Continuous power 5.24 W
Maximum current Irms 89.61 A LXM32.D72N4
Maximum permanent current 89.6 A
Second shaft Without second shaft end
Shaft diameter 1.5 in (38 mm)
Shaft length 3.1 in (80 mm)
key width 2.8 in (70 mm)
Feedback type Multiturn SinCos Hiperface
Holding torque 708.06 lbf.in (80 N.m) holding brake
Motor flange size 7.5 in (190 mm)
Number of motor stacks 1
Torque constant 1.3 N.m/A 248 °F (120 °C)
Back emf constant 87.6 V/krpm 248 °F (120 °C)
Number of motor poles 5.0
Rotor inertia 71.7 kg.cm²
Stator resistance 0.24 Ohm 68 °F (20 °C)
Stator inductance 2.54 mH 68 °F (20 °C)
Stator electrical time constant 21.2 ms 68 °F (20 °C)
Maximum radial force Fr 3730 N 1000 rpm
Maximum axial force Fa 0.2 x Fr
Brake pull-in power 40 W
type of cooling Natural convection
Length 9.8 in (250 mm)
Centring collar diameter 7.09 in (180 mm)
centring collar depth 0.2 in (4 mm)
Number of mounting holes 4
Mounting holes diameter 0.6 in (14 mm)
Circle diameter of the mounting holes 8.5 in (215 mm)
Product Weight 45.2 lb(US) (20.5 kg)
Sizing reference BMH1901P
Network number of phases 3
Accuracy error [angular] 1.4 °
Temperature copper hot 275 °F (135 °C)
Temperature magnet hot 212 °F (100 °C)
Temperature magnet rt 68 °F (20 °C)
Est. delivery between and    
Estimated delivery dates are estimates only. Int'l customers allow a few more days. For more precise delivery estimates, please contact us at support@plc-direct.com. Contact us in advance for expedited shipping options.
$8,166.90
1-year warranty
FREE WORDWIDE SHIPPING
Condition:
$0.00
$8,166.90
$0.00
Need More?
Ach Direct Debit American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Main

Characteristic Value(s)
Device short name BMH
Product or Component Type Servo motor
Maximum mechanical speed 4000 rpm
Continuous stall torque 265.5 lbf.in (30 N.m) LXM32.D72N4 24 A, 400 V, three phase
265.5 lbf.in (30 N.m) LXM32.D72N4 24 A, 480 V, three phase
265.5 lbf.in (30 N.m) LXM32MD85N4 32 A, 400 V, three phase
265.5 lbf.in (30 N.m) LXM32MD85N4 32 A, 480 V, three phase
265.5 lbf.in (30 N.m) LXM32MC10N4 40 A, 400 V, three phase
265.5 lbf.in (30 N.m) LXM32MC10N4 40 A, 480 V, three phase
Peak stall torque 687.7 lbf.in (77.7 N.m) LXM32.D72N4 24 A, 400 V, three phase
687.7 lbf.in (77.7 N.m) LXM32.D72N4 24 A, 480 V, three phase
766.5 lbf.in (86.6 N.m) LXM32MD85N4 32 A, 400 V, three phase
766.5 lbf.in (86.6 N.m) LXM32MD85N4 32 A, 480 V, three phase
793.9 lbf.in (89.7 N.m) LXM32MC10N4 40 A, 400 V, three phase
793.9 lbf.in (89.7 N.m) LXM32MC10N4 40 A, 480 V, three phase
Nominal output power 4800 W LXM32.D72N4 24 A, 400 V, three phase
4800 W LXM32.D72N4 24 A, 480 V, three phase
5180 W LXM32MD85N4 32 A, 400 V, three phase
5180 W LXM32MD85N4 32 A, 480 V, three phase
5180 W LXM32MC10N4 40 A, 400 V, three phase
5180 W LXM32MC10N4 40 A, 480 V, three phase
Nominal torque 162.9 lbf.in (18.4 N.m) LXM32.D72N4 24 A, 400 V, three phase
162.9 lbf.in (18.4 N.m) LXM32.D72N4 24 A, 480 V, three phase
146.04 lbf.in (16.5 N.m) LXM32MD85N4 32 A, 400 V, three phase
146.04 lbf.in (16.5 N.m) LXM32MD85N4 32 A, 480 V, three phase
146.04 lbf.in (16.5 N.m) LXM32MC10N4 40 A, 400 V, three phase
146.04 lbf.in (16.5 N.m) LXM32MC10N4 40 A, 480 V, three phase
Nominal speed 2500 rpm LXM32.D72N4 24 A, 400 V, three phase
2500 rpm LXM32.D72N4 24 A, 480 V, three phase
3000 rpm LXM32MD85N4 32 A, 400 V, three phase
3000 rpm LXM32MD85N4 32 A, 480 V, three phase
3000 rpm LXM32MC10N4 40 A, 400 V, three phase
3000 rpm LXM32MC10N4 40 A, 480 V, three phase
Product compatibility LXM32.D72N4 400...480 V three phase
Shaft end Keyed
IP Degree of Protection IP65 standard
IP67 with IP67 kit
Speed feedback resolution 131072 points/turn x 4096 turns
Holding brake With
Mounting Support International standard flange
Electrical Connection Rotatable right-angled connectors

Complementary

Characteristic Value(s)
Range Compatibility Lexium 32
[Us] rated supply voltage 480 V
Phase Three phase
Continuous stall current 23.2 A
Continuous power 5.24 W
Maximum current Irms 89.61 A LXM32.D72N4
Maximum permanent current 89.6 A
Second shaft Without second shaft end
Shaft diameter 1.5 in (38 mm)
Shaft length 3.1 in (80 mm)
key width 2.8 in (70 mm)
Feedback type Multiturn SinCos Hiperface
Holding torque 708.06 lbf.in (80 N.m) holding brake
Motor flange size 7.5 in (190 mm)
Number of motor stacks 1
Torque constant 1.3 N.m/A 248 °F (120 °C)
Back emf constant 87.6 V/krpm 248 °F (120 °C)
Number of motor poles 5.0
Rotor inertia 71.7 kg.cm²
Stator resistance 0.24 Ohm 68 °F (20 °C)
Stator inductance 2.54 mH 68 °F (20 °C)
Stator electrical time constant 21.2 ms 68 °F (20 °C)
Maximum radial force Fr 3730 N 1000 rpm
Maximum axial force Fa 0.2 x Fr
Brake pull-in power 40 W
type of cooling Natural convection
Length 9.8 in (250 mm)
Centring collar diameter 7.09 in (180 mm)
centring collar depth 0.2 in (4 mm)
Number of mounting holes 4
Mounting holes diameter 0.6 in (14 mm)
Circle diameter of the mounting holes 8.5 in (215 mm)
Product Weight 45.2 lb(US) (20.5 kg)
Sizing reference BMH1901P
Network number of phases 3
Accuracy error [angular] 1.4 °
Temperature copper hot 275 °F (135 °C)
Temperature magnet hot 212 °F (100 °C)
Temperature magnet rt 68 °F (20 °C)
Characteristic Value(s)
Range Compatibility Lexium 32
[Us] rated supply voltage 480 V
Phase Three phase
Continuous stall current 23.2 A
Continuous power 5.24 W
Maximum current Irms 89.61 A LXM32.D72N4
Maximum permanent current 89.6 A
Second shaft Without second shaft end
Shaft diameter 1.5 in (38 mm)
Shaft length 3.1 in (80 mm)
key width 2.8 in (70 mm)
Feedback type Multiturn SinCos Hiperface
Holding torque 708.06 lbf.in (80 N.m) holding brake
Motor flange size 7.5 in (190 mm)
Number of motor stacks 1
Torque constant 1.3 N.m/A 248 °F (120 °C)
Back emf constant 87.6 V/krpm 248 °F (120 °C)
Number of motor poles 5.0
Rotor inertia 71.7 kg.cm²
Stator resistance 0.24 Ohm 68 °F (20 °C)
Stator inductance 2.54 mH 68 °F (20 °C)
Stator electrical time constant 21.2 ms 68 °F (20 °C)
Maximum radial force Fr 3730 N 1000 rpm
Maximum axial force Fa 0.2 x Fr
Brake pull-in power 40 W
type of cooling Natural convection
Length 9.8 in (250 mm)
Centring collar diameter 7.09 in (180 mm)
centring collar depth 0.2 in (4 mm)
Number of mounting holes 4
Mounting holes diameter 0.6 in (14 mm)
Circle diameter of the mounting holes 8.5 in (215 mm)
Product Weight 45.2 lb(US) (20.5 kg)
Sizing reference BMH1901P
Network number of phases 3
Accuracy error [angular] 1.4 °
Temperature copper hot 275 °F (135 °C)
Temperature magnet hot 212 °F (100 °C)
Temperature magnet rt 68 °F (20 °C)

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Trusted By

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator