keyence

$0.00

Sold Out

Specifications

Model		CG-LC20
Lighting output	Number of channels	1
	Connector	M12 A-coded 5-pin female connector
	Dimming method	Depends on the connected LED lighting
	Gradation	1024-level digital gradation
	Voltage	24 V DC
	Capacity	Maximum 30 W
	Synchronization	Synchronized with trigger or shutter speed to camera/continuous lighting
	Dimming response	Depends on the connected LED lighting
Control interface	Connector	Dedicated 12-pin circular connector
Power source		Supplies power via control interface
Environmental resistance	Enclosure rating	IP67(IEC 60529)
	Ambient temperature	0–50°C (65°C or under for the main device)
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	10–500 Hz Power spectral density: 0.05 G2/Hz, 0.5 hours in X/Y/Z directions (IEC 60068-2-64)
	Shock resistance	50 G in 6 directions, 3 times each (IEC 60068-2-27)
Size (H×W×D)		21 mm × 100 mm × 26 mm (excluding cable) Total length 400 mm (including cable)
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Main device: Polyamide
Weight		Approx. 110 g

Keyence CG-MP120T Keyence

$2,578.90

Only 4 units left

Specifications

Model			CG-MP120T
LCD panel	Display element		TFT LCD
	Display colors		Approximately 16 million
	Resolution		1024 (W) × 768 (H)
	Backlight	Life	Approximately 50,000 hours (at room temperature and normal humidity)
	Touch screen	Type	Analog resistive touch screen
		Life	Over one million activations
Interface	Ethernet	Number of ports	2 (separate networks)
		Connector type	RJ-45
		Standards	1000BASE-T/100BASE-TX/10BASE-T
	USB	Number of ports	1 front port, 2 rear ports
Power supply	Power voltage		DC24V +25%/–20%
	Power consumption		2.5A, 48W (at 19.2 V) / 2.0A, 48W (at 24 V)
Environmental resistance	Enclosure rating		Built-in panel; front controls only are dust- and drip-proof with a rating equivalent to IP65f ^*1
	Ambient temperature		0 to +50°C (in vertical installations) ^*2
	Relative humidity		85°C RH or less (no condensation)
Size (H×W×D)			312.3 mm × 245.3 mm × 60.1 mm
Standard certifications			CE, FCC, NRTL, KC, UKCA
Material			Main casing: Polycarbonate Front sheet: PET
Weight			Approximately 2,400 g
^1 Assumes front USB cover is closed. ^2 For information on the rating when the unit is installed in orientations other than the vertical, see “Installation Method” in this manual.

Keyence CG-MU100 Keyence

$0.00

Sold Out

Specifications

Model			CG-MU100
Interface	HDMI	Number of ports	1
		Resolution	Up to 1920 (W) × 1080 (H)
	Ethernet	Number of ports	2 (separate networks)
		Connector type	RJ-45
		Standards	1000BASE-T/100BASE-TX/10BASE-T
	USB	Number of ports	3 ^*1
Power supply	Power voltage		DC24V +25%/–20%
	Power consumption		2.3A, 44.2W (at 19.2 V) / 1.9A, 45.6W (at 24 V)
Environmental resistance	Ambient temperature		0 to +45°C (with DIN rail)/0 to +40°C (in vertical and horizontal installations)
	Relative humidity		85°C RH or less (no condensation)
Size (H×W×D)			56.5 mm × 180.0 mm × 161.4 mm
Standard certifications			CE, FCC, NRTL, KC, UKCA
Material			Main casing: Polycarbonate
Weight			Approximately 830 g
^*1 Can be used for touch panel control. Note, however, that operation is not guaranteed with all devices.

Keyence CG-SW100 Keyence

$0.00

Sold Out

Specifications

Model		CG-SW100
Ethernet	Number of ports (PoE)	4
	Number of ports (non-PoE)	2
	Connector	M12 X-coded 8-pin female connector
	Standard	1000BASE-T/100BASE-TX/10BASE-Te
	PoE standard	IEEE 802.3af/at (maximum 30 W/port output)
Power supply	Connector	M12 L-coded 5-pin male connector
	Power voltage	24 V DC +25%/-20%
	Rated current consumption (with PoE output)	10.8 A, 207.4 W (at 19.2 V) / 7.6 A, 182.4 W (at 24 V)
	Current consumption (without PoE output)	0.4 A, 8.5 W (at 19.2 V) / 0.4 A, 8.6 W (at 24 V)
Environmental resistance	Enclosure rating	IP67 (IEC 60529)
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	10–500 Hz Power spectral density: 0.05 G2/Hz, 0.5 hours in X/Y/Z directions (IEC 60068-2-64)
	Shock resistance	50 G in 6 directions, 3 times each (IEC 60068-2-27)
Size (H×W×D)		176.4 mm × 80.4 mm × 43.4 mm (excluding connector protrusions)
Case temperature		0–70°C ^*1
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Main device case: Aluminum die-casting
Weight		Approx. 750 g
^*1 (Reference value) For 90 W PoE output: 226 mm × 130 mm × 10 mm aluminum plate mounting, ambient temperature 45°C, case temperature 70°C For 120 W PoE output: 296 mm × 200 mm × 10 mm aluminum plate mounting, ambient temperature 45°C, case temperature 70°C

Keyence CL-3000 Keyence

$1,992.26

Only 6 units left

Specifications

Model		CL-3000
Type		Controller
Number of optical unit connections		Controller only: 2 units; using expansion units / relay units: 6 units
Interface	EtherNet/IP™	Supports cyclic communication and message communication; RPI: 1 to 10,000 ms (0.5 ms units) Maximum number of connections: 8, complies with Version CT14 conformance test Cannot be used when using PROFINET, PLC link or EtherCAT
	PROFINET	Compatible with conformance class A. Cannot be used when using EtherNet/IP™, PLC link or EtherCAT
	PLC-Link	The following PLCs are supported: Mitsubishi Electric: MELSEC iQ-R Series, iQ-F Series, Q Series, L Series, FX Series Cannot be used when using EtherNet/IP™, PROFINET or EtherCAT
	Ethernet	Allows for measurement data output and control I/O via no-protocol command communication with PCs and PLCs 100Base-TX, capable of communication with CL-NavigatorN^*1
	USB	Conforms to USB 2.0 HighSpeed, capable of communication with CL-NavigatorN^*1
	RS-232C	Allows for measurement data output and control I/O via no-protocol command communication with PCs and PLCs Baud rate: 9600 to 115,200 bps, data length: 8 bit, stop bit: 1 bit, parity: none / even numbers / odd numbers
	Terminal (IN)	13 (supports function switching via software)
	Terminal (OUT)	11 ^*2(supports function switching via software)
Ratings	Power voltage	24 VDC ±10%
	Maximum current consumption	With 1 optical unit connected: 0.86 A, with 4 optical units connected: 3.3 A, with 6 optical units connected: 4.5 A
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F
	Relative humidity	20% RH to 85% RH (no condensation)
	Vibration resistance	10 to 57 Hz, double amplitude 0.3 mm 0.01"; 2 hours each for X, Y, and Z axes
Monitor／Setting support software		CL-NavigatorN
Weight		Approx. 600 g
CL-NavigatorN OS environment	Supported OS	Windows^Ⓡ 11 Pro / Windows^Ⓡ 10 ^3 / Windows^Ⓡ 7 ^4
	CPU	Celeron Dualcore 1.7 GHz or higher
	Memory capacity	4 GB or more
	Required free space on hard disk	1 GB or more
	Display resolution	XGA (1024 x 768 pixels) or higher
^1 Sample DLL and LabVIEW programs are available. Contact your local sales office for details. ^2 Positive common connection is supported for NPN input devices, and negative common connection for PNP input devices. ^3 Home, Pro and Enterprise Editions are supported. ^4 Home Premium, Professional and Ultimate Editions are supported. • Windows^Ⓡ and Excel are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Keyence CL-3050 Keyence

$5,810.00

Only 2 units left

Specifications

Model		CL-3050
Type		Controller
Number of optical unit connections		Controller only: 2 units; using expansion units/relay units: 6 units
Interface	EtherNet/IP™	Supports cyclic communication and message communication; RPI: 1 to 10,000 ms (0.5 ms units) Maximum number of connections: 8, complies with Version CT14 conformance test Cannot be used when using PROFINET, PLC link or EtherCAT
	PROFINET	Compatible with conformance class A. Cannot be used when using EtherNet/IP™, PLC link or EtherCAT
	PLC-Link	The following PLCs are supported: Mitsubishi Electric: MELSEC iQ-R Series, iQ-F Series, Q Series, L Series, FX Series Cannot be used when using EtherNet/IP™, PROFINET or EtherCAT
	Ethernet	Allows for measurement data output and control I/O via no-protocol command communication with PCs and PLCs 100Base-TX, capable of communication with CL-NavigatorG^*1
	USB	Conforms to USB 2.0 HighSpeed, capable of communication with CL-NavigatorG^*1
	RS-232C	Allows for measurement data output and control I/O via no-protocol command communication with PCs and PLCs Baud rate: 9600 to 115200 bps, data length: 8 bit, stop bit: 1 bit, parity: none/even numbers/odd numbers
	Terminal (IN)	13 (supports function switching via software)
	Terminal (OUT)	11 ^*2 (supports function switching via software)
Ratings	Power voltage	24 VDC ±10 %
	Maximum current consumption	With 1 optical unit connected: 0.86 A, with 4 optical units connected: 3.3 A, with 6 optical units connected: 4.5 A
Environmental resistance	Ambient temperature	0 to 50 °C 32 to 122 °F
	Relative humidity	20 % RH to 85 % RH (no condensation)
	Vibration resistance	10 to 57 Hz, double amplitude 0.3 mm 0.01"; 2 hours each for X, Y, and Z axes
Monitor／Setting support software		CL-NavigatorG
Weight		Approx. 600 g
CL-NavigatorG OS environment	Supported OS	Windows^Ⓡ 11 Pro / Windows^Ⓡ 10 ^3 / Windows^Ⓡ 7 ^4
	CPU	Celeron Dualcore 1.7 GHz or higher
	Memory capacity	4 GB or more
	Required free space on hard disk	1 GB or more
	Display resolution	XGA (1,024 x 768 pixels) or higher
^1 Sample DLL and LabVIEW programs are available. Contact your local sales office for details. ^2 Positive common connection is supported for NPN input devices, and negative common connection for PNP input devices. ^3 Home, Pro and Enterprise Editions are supported. ^4 Home Premium, Professional and Ultimate Editions are supported. Windows^Ⓡ and Excel are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Keyence CL-AC1 Keyence

$0.00

Sold Out

Specifications

Model				CL-AC1
Length				1 m 3.3'
Weight				200 g

Keyence CL-AC2 Keyence

$0.00

Sold Out

Specifications

Model				CL-AC2
Length				2 m 6.6'
Weight				400 g

Keyence CL-C10 Keyence

$920.69

Only 1 unit left

Specifications

Model				CL-C10
Length				10 m 32.8'
Weight				850 g

Keyence CL-C30 Keyence

$0.00

Sold Out

Specifications

Model				CL-C30
Length				30 m 98.4'
Weight				2500 g

Keyence CL-C5 Keyence

$733.49

Only 5 units left

Specifications

Model				CL-C5
Length				5 m 16.4'
Weight				450 g

Keyence CL-C56H Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CL-CV15 Keyence

$0.00

Sold Out

Specifications

Model				CL-CV15
Type				Head extension cable (for CL-S/CL-V)
Length				15 m 49.2'
Weight				250 g 8.83 oz

Keyence CL-CV2 Keyence

$0.00

Sold Out

Specifications

Model				CL-CV2
Type				Head extension cable (for CL-S/CL-V)
Length				2 m 6.6'
Weight				100 g 3.53 oz

Keyence CL-CV5 Keyence

$0.00

Sold Out

Specifications

Model				CL-CV5
Type				Head extension cable (for CL-S/CL-V)
Length				5 m 16.4'
Weight				150 g 5.3 oz

Keyence CL-D500 Keyence

$0.00

Sold Out

Specifications

Model		CL-D500
Type		Display panel
Display cycle		Approximately 10 times/second
Minimum display unit		0.001 µm
Display range		± 999.999 µm to ± 9999.99 mm ± 0.0394" to ± 393.70"
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F
	Relative humidity	20% RH to 85% RH (no condensation)
Weight		Approx. 100 g

Keyence CL-E100 Keyence

$5,008.28

Only 1 unit left

Specifications

Model		CL-E100
Type		Encoder unit
Number of encoder axes		Incremental method (A/B/Z phase)
Minimum encoder input time		100 ns to 20 µs
Maximum current consumption		0.18 A
Service power supply		5 VDC ± 10%, maximum power supply 200 mA
Input terminal		Compatible with NPN/PNP open collector output (5 V/12 V/24 V). Compatible with line driver output
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F
	Relative humidity	20% RH to 85% RH (no condensation)
Weight		Approx. 300 g

Keyence CL-EC100 Keyence

$4,252.90

Only 2 units left

Specifications

Model		CL-EC100
EtherCAT communication specifications	Conforming standard	IEEE802.3u (100BASE-TX)^*1
	Communication speed	100 Mbps (100BASE-TX)^*1
	Communication period	Shortest 125 µs^*1
	Connection cable	STP/UTP cable, category 5e or above^*1
	Inter-node distance	100 m 328.1'^*1
	Communications port	RJ45 × 2^*1
	Supported functions	Process Data Object (PDO) communication (Cyclic communication: Process data communication) Service Data Object (SDO) communication (Non-cyclic communication: Mailbox communication) CoE Distributed Clock Explicit Device Identification^*1
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F
	Relative humidity	20% RH to 85% RH (no condensation)
Weight		Approx. 330 g
^*1 Cannot be used when using EtherNet/IP™, PROFINET or PLC Link. • Cannot be used simultaneously with an encoder unit.

Keyence CL-H100 Keyence

$2,441.25

Only 1 unit left

Specifications

Model		CL-H100
Type		Expansion Unit
Number of optical unit connections		Supports two CL-H200 expansion units
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F
	Relative humidity	20% RH to 85% RH (no condensation)
Weight		Approx. 300 g

Keyence CL-H150 Keyence

$0.00

Sold Out

Specifications

Model		CL-H150
Type		Expansion Unit
Number of optical unit connections		Supports two CL-H200 expansion units
Terminal block	Analog voltage output	±10 V ×4 outputs, output impedance: 100 Ω
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F
	Relative humidity	20% RH to 85% RH (no condensation)
Weight		Approx. 300 g

Keyence CL-H200 Keyence

$2,437.77

Only 4 units left

Specifications

Model		CL-H200
Type		Relay unit
Number of optical unit connections		Supports two optical unit connections
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F
	Relative humidity	20% RH to 85% RH (no condensation)
Weight		Approx. 300 g

Keyence CL-L007 Keyence

$0.00

Sold Out

Specifications

Model				CL-L007 ^*1
Type				Sensor head (Compact ø8 ・Quad type)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.

Keyence CL-L007G Keyence

$0.00

Sold Out

Specifications

Model			CL-L007G
Type			Optical unit
Head			CL-L007 ^*1
Reference distance			7 mm 0.28 "
Reference measurement range	Measurement range		±1.5 mm ±0.06"
	Linearity		±1.95 μm ±0.000077" ^*2
High precision measurement range	Measurement range		±0.5 mm ±0.02"
	Linearity		±0.78 μm ±0.000031" ^*2
Resolution			0.015 μm 0.000001" ^*3
Spot diameter			ø750 μm ø0.0295"
Laser class	Optical unit		Class I
Sampling cycle			100/200/500/1000 μs (Adjustable 4-stage)
Environmental resistance	Enclosure rating	Head	IP67 (IEC60529)
	Ambient light		Target surface illuminance: 30000 lux (Incandescent lamp)
	Ambient temperature		0 to 50°C 32 to 122°F
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance	Head	10 to 57 Hz, double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes
		Optical unit	10 to 57 Hz, double amplitude 0.3 mm 0.01"; 2 hours each for X, Y, and Z axes
	Shock resistance		15 G, 6 ms
Temperature characteristic	Head		0.005% of F.S./°C
	Optical unit		0.015% of F.S./°C
Material	Head		SUS
	Optical unit		Polycarbonate
Weight	Head		Approx. 140 g 4.94 oz
	Optical unit		Approx. 1600 g 3.53 lb
^1 Sensor head and optical unit are a matched pair. Not cross compatible. ^2 Value measured in displacement mode with KEYENCE reference workpiece (mirrored surface). ^*3 Value measured using 16,384 average cycles with KEYENCE reference workpiece (mirrored surface).

Keyence CL-L007N Keyence

$0.00

Sold Out

Specifications

Model			CL-L007N
Type			Optical unit
Head			CL-L007 ^*1
Reference distance			7 mm 0.28"
Reference measurement range	Measurement range		±1.5 mm ±0.06"
	Linearity		±2.1 μm ±0.000083" ^*2
High precision measurement range	Measurement range		±0.5 mm ±0.02"
	Linearity		±0.91 μm ±0.000036" ^*2
Resolution			0.25 μm 0.000010" ^*3
Spot diameter			ø750 μm ø0.0295"
Laser class	Optical unit		Class I
Sampling cycle			100/200/500/1000 μs (Adjustable 4-stage)
Environmental resistance	Enclosure rating	Head	IP67 (IEC60529)
	Ambient light		Target surface illuminance: 30000 lux (Incandescent lamp)
	Ambient temperature		0 to 50°C 32 to 122°F
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance	Head	10 to 57 Hz, double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes
		Optical unit	10 to 57 Hz, double amplitude 0.3 mm 0.01"; 2 hours each for X, Y, and Z axes
	Shock resistance		15 G, 6 ms
Temperature characteristic	Head		0.005% of F.S./°C
	Optical unit		0.015% of F.S./°C
Material	Head		SUS
	Optical unit		Polycarbonate
Weight	Head		Approx. 140 g 4.94 oz
	Optical unit		Approx. 1600 g 3.53 lb
^1 Sensor head and optical unit are a matched pair. Not cross compatible. ^2 Value measured in displacement mode with KEYENCE reference workpiece (mirrored surface). ^*3 Value measured using 16,384 average cycles with KEYENCE reference workpiece (mirrored surface).