keyence

$0.00

Sold Out

Specifications

Model		SJ-Q228
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method / Applied voltage		Pulse AC method/±8000 Vmax
Ion balance control method		Hi-Power I.C.C. method
Ion balance		±3 V ^*1
Clean rating		ISO14644-1 Class 3 ^*2
Installation distance		10 mm 0.39" or more
Control input	Static elimination stop input	NPN open collector or non-voltage contact signal
Control output	Ion level warning, condition warning, alarm output	NPN open collector Maximum 100 mA (40 VDC or less)
	Condition alarm output
	Alarm output
Communication functions		Remote control
Average power consumption		Normal operation: 8.4 W, LPC mode: 4.1 W ^*3
Major functions		Condition alarm, ion level alarm, alarm output
Air connection port		Rc1/8
Air supply pressure		0.1 to 0.5 MPa 14.50 to 72.52 PSI (recommended air pressure: 0.2 MPa 29.01 PSI)^*4
Effective length		2360 mm 92.91" ^*5
Total length		2240 mm 88.19"
No. ofelectrodes		37
Rating	Power voltage	24 to 36 VDC±10%
	Current consumption	Normal operation: 700 mA or less, LPC mode: 170 mA (typical) ^*3
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	85% RH or less (no condensation)
Material	Electrode probe	Tungsten
	Main body	ABS/PBT/PP/LCP/PPS/SPS/SUS
Weight		2440 g 86.13 oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81", Air supply pressure: 0.2 MPa 29.01 PSI, Frequency: Highest device driving frequency, Operating ambient temperature: 0 to +40°C 32 to 104°F, Operating ambient humidity: 35 to 65% RH, Measurement position: Bar Center ^2 Contact us for detailed conditions. ^3 24 VDC ^4 If you wish to use the air purge function with intermittent air supply, contact us. ^*5 Effective length is for static elimination range when installation distance is 100 mm 3.94".

Keyence SJ-Q252 Keyence

$0.00

Sold Out

Specifications

Model		SJ-Q252
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method / Applied voltage		Pulse AC method/±8000 Vmax
Ion balance control method		Hi-Power I.C.C. method
Ion balance		±3 V ^*1
Clean rating		ISO14644-1 Class 3 ^*2
Installation distance		10 mm 0.39" or more
Control input	Static elimination stop input	NPN open collector or non-voltage contact signal
Control output	Ion level warning, condition warning, alarm output	NPN open collector Maximum 100 mA (40 VDC or less)
	Condition alarm output
	Alarm output
Communication functions		Remote control
Average power consumption		Normal operation: 8.4 W, LPC mode: 4.1 W ^*3
Major functions		Condition alarm, ion level alarm, alarm output
Air connection port		Rc1/8
Air supply pressure		0.1 to 0.5 MPa 14.50 to 72.52 PSI (recommended air pressure: 0.2 MPa 29.01 PSI)^*4
Effective length		2600 mm 102.36" ^*5
Total length		2480 mm 97.64"
No. ofelectrodes		41
Rating	Power voltage	24 to 36 VDC±10%
	Current consumption	Normal operation: 700 mA or less, LPC mode: 170 mA (typical) ^*3
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	85% RH or less (no condensation)
Material	Electrode probe	Tungsten
	Main body	ABS/PBT/PP/LCP/PPS/SPS/SUS
Weight		2660 g 93.89 oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81", Air supply pressure: 0.2 MPa 29.01 PSI, Frequency: Highest device driving frequency, Operating ambient temperature: 0 to +40°C 32 to 104°F, Operating ambient humidity: 35 to 65% RH, Measurement position: Bar Center ^2 Contact us for detailed conditions. ^3 24 VDC ^4 If you wish to use the air purge function with intermittent air supply, contact us. ^*5 Effective length is for static elimination range when installation distance is 100 mm 3.94".

Keyence SJ-Q300 Keyence

$0.00

Sold Out

Specifications

Model		SJ-Q300
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method / Applied voltage		Pulse AC method/±8000 Vmax
Ion balance control method		Hi-Power I.C.C. method
Ion balance		±3 V ^*1
Clean rating		ISO14644-1 Class 3 ^*2
Installation distance		10 mm 0.39" or more
Control input	Static elimination stop input	NPN open collector or non-voltage contact signal
Control output	Ion level warning, condition warning, alarm output	NPN open collector Maximum 100 mA (40 VDC or less)
	Condition alarm output
	Alarm output
Communication functions		Remote control
Average power consumption		Normal operation: 8.4 W, LPC mode: 4.1 W ^*3
Major functions		Condition alarm, ion level alarm, alarm output
Air connection port		Rc1/8
Air supply pressure		0.1 to 0.5 MPa 14.50 to 72.52 PSI (recommended air pressure: 0.2 MPa 29.01 PSI)^*4
Effective length		3080 mm 121.26" ^*5
Total length		2960 mm 116.54"
No. ofelectrodes		49
Rating	Power voltage	24 to 36 VDC±10%
	Current consumption	Normal operation: 700 mA or less, LPC mode: 170 mA (typical) ^*3
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	85% RH or less (no condensation)
Material	Electrode probe	Tungsten
	Main body	ABS/PBT/PP/LCP/PPS/SPS/SUS
Weight		3090 g 109.07 oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81", Air supply pressure: 0.2 MPa 29.01 PSI, Frequency: Highest device driving frequency, Operating ambient temperature: 0 to +40°C 32 to 104°F, Operating ambient humidity: 35 to 65% RH, Measurement position: Bar Center ^2 Contact us for detailed conditions. ^3 24 VDC ^4 If you wish to use the air purge function with intermittent air supply, contact us. ^*5 Effective length is for static elimination range when installation distance is 100 mm 3.94".

Keyence SJ-R036A Keyence

$2,160.70

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-R036C Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-R060 Keyence

$2,756.55

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-R180A Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-S020 Keyence

$1,731.14

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-U1 Keyence

$543.14

Only 4 units left

Specifications

Model		SJ-U1
Rating	Rating input	100 to 240 VAC (50/60Hz) 96VA^*1
	Rated output	24 VDC 1.67A
^*1 The included AC cable has power rating of 125 V for use in Japan.

Keyence SJ-U3 Keyence

$477.23

Only 2 units left

Specifications

Model		SJ-U3
Rating	Rating input	100 to 240 VAC (50/60Hz)
	Rated output	24VDC 2.7A
Environmental resistance	Ambient temperature	0 to +35°C 32 to +95°F
	Relative humidity	20 to 80% (no condensation)
Weight		Approx. 260g

Keyence SK-050 Keyence

$1,111.74

Only 6 units left

Specifications

Model			SK-050
Charge potential measurement	Measurement mode		High-accuracy mode, Wide-range mode
	Reference distance	High-precision mode	25 mm 0.98"
		Wide-range mode	100 mm 3.94"
	Measuring distance	High-precision mode	5 to 50 mm 0.20" to 1.97"
		Wide-range mode	60 to 120 mm 2.36" to 4.72"
	Measuring range	High-precision mode	±2 kV ^*1
		Wide-range mode	±50 kV ^1 ^2
	Measuring accuracy	High-precision mode	±10 V ^*3
		Wide-range mode	±100 V ^*3
	Sampling cycle		Approx. 1.4 ms
Temperature measurement	Measuring range		0 to 50°C 32 to 122°F
	Measuring accuracy		±1°C ±1.8°F ^*4
	Display resolution		0.1°C 0.18°F
	Sampling cycle		1 s
Humidity measurement	Measuring range		10 to 85% RH
	Measuring accuracy		±5% RH ^*4
	Display resolution		0.1% RH
	Sampling cycle		1 s
Ion balance measuring mode	Ion balance measuring range		±1 kV ^*5
	Measuring accuracy		±10 V ^5 ^6
	Display resolution		1 V ^*5
Environmental resistance	Ambient temperature		0 to 50°C 32 to 122°F (No freezing or condensation)
	Relative humidity		10 to 85% RH (no condensation)
	Pollution degree		-
Material			Body case: PC, Metal parts: SUS, Cable: PVC
Weight			Approx. 35 g 1.24 oz
^1 If the distance to the sensing target is shorter than the reference distance, even if the conditions are within the measurable range, measurement cannot be performed up to the upper limit of the measuring range. ^2 Measurement accuracy is satisfied in the range of ±30 kV. ^3 Within ±100 V when using high-precision mode; within ±1 kV when using wide-range mode. In other ranges, display value has an accuracy of ±10% (display value). Values are obtained from a mean of 256 measurements. ^4 At 25°C 77°F with 50% RH. ^5 OP-87934 is required. ^6 Within ±100 V. In other ranges, display value has an accuracy of ±10% (display value).

Keyence SK-1000 Keyence

$1,030.71

Only 4 units left

Specifications

Model		SK-1000
Type		DIN rail mounting
Main unit/expansion unit		Main unit
Display	Display resolution	0.001 kV
	Display range	±99.999 kV to 99 kV (4-level selection available)
Analog voltage output		±5 V, 1 to 5 V, 0 to 5 V, Output impedance: 100 Ω ^*1
Analog current output		4 to 20 mA, Max. load resistance: 350 Ω ^*1
Control input	Zero-shift input	Non-voltage input ^*2
	Timing input
	Reset input
	Bank input
Control output	Judgment output	Open collector output (NPN/PNP switching, N.O./N.C. switching) ^*3
	Alarm output	Open collector output (NPN/PNP switching, N.C.) ^*3
Power supply	Power supply voltage	10 to 30 VDC (including ripple (P-P) 10% or less) ^*4
	Power consumption	1650 mW or less (55 mA or less at 30 V) (excluding load current of each output) ^*5
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F (No freezing or condensation)
	Relative humidity	10 to 85% RH (no condensation)
	Pollution degree	-
Material		Body case and front cover: PC, Key top: POM, Cable: PVC
Weight		Approx. 150 g 5.30 oz (including accessories)
^1 Select ±5 V, 1 to 5 V, 0 to 5 V, or 4 to 20 mA for use. ^2 Inputs are assigned to the four external input lines. Non-voltage input rating: ON voltage 2 V or lower, OFF current 0.02 mA or lower. Voltage input rating: maximum input rating is 30 V, ON voltage 7.5 V or higher, OFF current 0.05 mA or below. ^3 NPN open collector output rating: maximum 50 mA/ch (20 mA/ch when expansion units are added), 30 V or less, residual voltage: 1 V or less (1.5 V or less when adding 6 or more expansion units, including main unit); PNP open collector output rating: maximum 50 mA/ch (20 mA/ch when expansion units are added), below power supply voltage, residual voltage: 2 V or less (2.5 V or less when adding 6 or more expansion units, including main unit) ^4 Use 20 to 30 V as the power supply voltage when using 6 or more expansion units, including the main unit. ^*5 When connecting 8 units for DL connection, the maximum power consumption is 11.3 W.

Keyence SK-1050 Keyence

$548.34

Only 1 unit left

Specifications

Model		SK-1050
Type		DIN rail mounting
Main unit/expansion unit		Expansion unit
Display	Display resolution	0.001 kV
	Display range	±99.999 kV to 99 kV (4-level selection available)
Analog voltage output		None
Analog current output
Control input	Zero-shift input	Non-voltage input ^*1
	Timing input
	Reset input
	Bank input
Control output	Judgment output	Open collector output (NPN/PNP switching, N.O./N.C. switching) ^*2
	Alarm output	Open collector output (NPN/PNP switching, N.C.) ^*2
Power supply	Power supply voltage	Supplied from main unit ^*3
	Power consumption	1170 mW or less (39 mA or less at 30 V) (excluding load current of each output) ^*4
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F (No freezing or condensation)
	Relative humidity	10 to 85% RH (no condensation)
	Pollution degree	-
Material		Body case and front cover: PC, Key top: POM, Cable: PVC
Weight		Approx. 140 g 4.94 oz (including accessories)
^1 Inputs are assigned to the four external input lines. Non-voltage input rating: ON voltage 2 V or lower, OFF current 0.02 mA or lower. Voltage input rating: maximum input rating is 30 V, ON voltage 7.5 V or higher, OFF current 0.05 mA or below. ^2 NPN open collector output rating: maximum 50 mA/ch (20 mA/ch when expansion units are added), 30 V or less, residual voltage: 1 V or less (1.5 V or less when adding 6 or more expansion units, including main unit); PNP open collector output rating: maximum 50 mA/ch (20 mA/ch when expansion units are added), below power supply voltage, residual voltage: 2 V or less (2.5 V or less when adding 6 or more expansion units, including main unit) ^3 Use 20 to 30 V as the power supply voltage when using 6 or more expansion units, including the main unit. ^4 When connecting 8 units for DL connection, the maximum power consumption is 11.3 W.

Keyence SK-3000 Keyence

$0.00

Sold Out

Specifications

Model		SK-3000
Type		DIN rail mounting
Main unit/expansion unit		Main unit
Display	Display resolution	0.1 V
	Display range	-
Analog voltage output		±5 V, 1 to 5 V, 0 to 5 V, Output impedance: 100 Ω ^*1
Analog current output		4 to 20 mA, Max. load resistance: 350 Ω ^*1
Control input	Zero-shift input	Switchable between non-voltage input and voltage input [Non-voltage input] ON voltage: 2 V or less, OFF current: 0.02 mA or less [Voltage input] Maximum input rating: 30 V or less, ON voltage: 7.5 V or more, OFF current: 0.05 mA or less ^*2
	Timing input
	Reset input
	Bank input
Control output	Judgment output	Open collector output (NPN/PNP switching, N.O./N.C. switching) ^*3
	Alarm output	Open collector output (NPN/PNP switching, N.C.) ^*3
Power supply	Power supply voltage	10 to 30 VDC (including ripple (P-P) 10% or less) ^*4
	Power consumption	1650 mW or less (55 mA or less at 30 V) (excluding load current of each output) ^*5
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F (No freezing or condensation)
	Relative humidity	85% RH or less (No condensation)
	Pollution degree	2
Material		Body case and front cover: PC, Key top: POM, Cable: PVC
Weight		Approx. 150 g 5.30 oz (including accessories)
^1 Select ±5 V, 1 to 5 V, 0 to 5 V, or 4 to 20 mA for use. ^2 Inputs are assigned to the four external input lines. ^3 NPN open collector output rating: maximum 50 mA/ch (20 mA/ch when expansion units are added), 30 V or less, residual voltage: 1 V or less (1.5 V or less when adding 6 or more expansion units, including main unit); PNP open collector output rating: maximum 50 mA/ch (20 mA/ch when expansion units are added), below power supply voltage, residual voltage: 2 V or less (2.5 V or less when adding 6 or more expansion units, including main unit) ^4 Use 20 to 30 V as the power supply voltage when using 6 or more expansion units, including the main unit. ^*5 When connecting 8 units for DL connection, the maximum power consumption is 11.3 W.

Keyence SK-3050 Keyence

$0.00

Sold Out

Specifications

Model		SK-3050
Type		DIN rail mounting
Main unit/expansion unit		Expansion unit
Display	Display resolution	0.1 V
	Display range	-
Analog voltage output		None
Analog current output
Control input	Zero-shift input	Switchable between non-voltage input and voltage input [Non-voltage input] ON voltage: 2 V or less, OFF current: 0.02 mA or less [Voltage input] Maximum input rating: 30 V or less, ON voltage: 7.5 V or more, OFF current: 0.05 mA or less ^*1
	Timing input
	Reset input
	Bank input
Control output	Judgment output	Open collector output (NPN/PNP switching, N.O./N.C. switching) ^*2
	Alarm output	Open collector output (NPN/PNP switching, N.C.) ^*2
Power supply	Power supply voltage	Supplied from main unit ^*3
	Power consumption	1170 mW or less (39 mA or less at 30 V) (excluding load current of each output) ^*4
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F (No freezing or condensation)
	Relative humidity	85% RH or less (No condensation)
	Pollution degree	2
Material		Body case and front cover: PC, Key top: POM, Cable: PVC
Weight		Approx. 140 g 4.94 oz (including accessories)
^1 Inputs are assigned to the four external input lines. ^2 NPN open collector output rating: maximum 50 mA/ch (20 mA/ch when expansion units are added), 30 V or less, residual voltage: 1 V or less (1.5 V or less when adding 6 or more expansion units, including main unit); PNP open collector output rating: maximum 50 mA/ch (20 mA/ch when expansion units are added), below power supply voltage, residual voltage: 2 V or less (2.5 V or less when adding 6 or more expansion units, including main unit) ^3 Use 20 to 30 V as the power supply voltage when using 6 or more expansion units, including the main unit. ^4 When connecting 8 units for DL connection, the maximum power consumption is 11.3 W.

Keyence SK-C3 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SK-H050 Keyence

$1,874.84

Only 8 units left

Specifications

Model			SK-H050
Charge potential measurement	Measurement mode		High-precision mode, Wide-range mode
	Measuring distance	High-precision mode	25 mm 0.98"
		Wide-range mode	100 mm 3.94"
	Measuring range	High-precision mode	±2 kV
		Wide-range mode	±50 kV
	Measuring accuracy	High-precision mode	±10 V^*1
		Wide-range mode	±100 V^1^2
	Display resolution		0 to 999 V : 1 V, 1.00 to 9.99 kV : 0.01 kV. 10.0 kV and higher : 0.1 kV
	Sampling cycle		Approx 1.4 ms
Temperature measurement	Measuring range		0 to +40℃ 32°F to 104°F
	Measuring accuracy		±1°C 30.2 to 33.8°F^*3
	Display resolution		0.1°C 32.2°F
	Sampling cycle		1 s
Humidity measurement	Measuring range		10 to 85% RH
	Measuring accuracy		±5% RH^*3
	Display resolution		1% RH
	Sampling cycle		1 s
Charge monitor function	Ion balance measuring mode	Ion balance measuring range	±1 kV^*4
		Measured voltage display resolution	±10 V^4^5
			1 V^*4
	Static elimination time measuring mode	Charge voltage	±1400 V^*4
		Static elimination time display resolution	0.1 s^*4
		Measuring time	0 to 99 s^*4
Laser class			Class 1 Laser Product (IEC60825-1 : 2014, FDA (CDRH) Part 1040.10^*6)
PC interface			USB 2.0 Full Speed
Power supply			2 AA alkaline dry-cell batteries
Power supply	Operating time		8 hours (in charge potential measuring mode)
Environmental resistance	Ambient temperature		0 to +40 °C 32 to 104 °F (No freezing or condensation)
	Relative humidity		10 to 85 % RH (No condensation)^*7
Material			SK-H050 : PC-ABS, PC, SUS/SK-H055 : PC, SUS, PTFE, PVC
Weight			SK-H050: Approx. 240 g, SK-H055: Approx. 220 g
^1 Within ±100 V when using high-precision mode; within ±1 kV when using wide-range mode. In other ranges, display value has an accuracy of ±10% (display value). Values are obtained from measurements with a response time of 0.8 seconds. ^2 Measuring accuracy is satisfied in the range of ±30 kV. ^3 25°C 77°F, 50% RH. ^4 SK-H055 is required. ^5 Within ±100 V. In other ranges, display value has an accuracy of ±10% (display value). ^6 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^*7 10 to 60 % RH when using SK-H055.

Keyence SK-H055 Keyence

$4,868.46

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SL-452HS Keyence

$0.00

Sold Out

Buy the Keyence SL-452HS - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence SL-452HS is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence SL-C08H Keyence

$1,102.05

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SL-C112F Keyence

$1,667.50

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SL-C12H Keyence

$509.99

Only 5 units left

Buy the Keyence SL-C12H - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence SL-C12H is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence SL-C12H-R Keyence

$1,231.28

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SL-C16F Keyence

$1,364.97

Only 5 units left

Buy the Keyence SL-C16F - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence SL-C16F is a direct drop-in replacement for existing installations and ships ready for integration.