Optical Metrology Systems

Filters

In stock (0)
Out of stock (74)

Showing 1 - 24 of 74 products

Keyence IM-H3C Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IM-G33 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IM-G23 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IM-DXW12NT Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IM-8030T Keyence

$0.00

Sold Out

Specifications

Model				IM-8030T
Type				Head
Image sensor				1" 20-megapixel monochrome CMOS
Display				12.1" LCD monitor (WXGA: 1280 × 800)
Receiver lens				Double telecentric lens
Image measurement	Field of view	Wide-field measurement mode		300 × 200 mm 11.81" × 7.87" (4× R50 R1.97")
		High-precision measurement mode		225 × 125 mm 8.86" × 4.92"
	Minimum display unit			0.1 μm
	Repeatability	Wide-field measurement mode	Without stage movement	±1 μm
			With stage movement	±2 μm
		High-precision measurement mode	Without stage movement	±0.5 μm
			With stage movement	±1.5 μm
	Measurement accuracy (±2σ)	Wide-field measurement mode	Without binding	±3.9 μm ^*1
			With binding	±(7 + 0.02 L) μm ^*2
		High-precision measurement mode	Without binding	±2 μm ^*3
			With binding	±(4 + 0.02 L) μm ^*4
	Outer diameter measurement	Measurement accuracy	Wide-field measurement mode	±(2.8 + 0.02 D) μm ^*5
			High-precision measurement mode	±(1.4 + 0.04 D) μm ^*6
Light probe measurement	Measurable area (XY)			190 × 90 mm 7.48" × 3.54"
	Maximum measurement depth			30 mm 1.18"
	Light probe diameter			ø3 mm ø0.12"
	Measuring force			0.015 N
	Repeatability			±2 μm ^*7
	Measurement accuracy			±(8 + 0.02 L) μm ^*8
Height Measurement Unit	Measurement range			0 to 75 mm 0 to 2.95"
	Measuring force			0.3 N
	Measurement accuracy (XY)			±0.2 mm 0.0079" ^*9
	Minimum display unit			1 μm
	Measurable area (XY)	Wide-field measurement mode		145 × 95 mm 5.71" × 3.74"
		High-precision measurement mode		107.5 × 95 mm 4.23" × 3.74"
	Repeatability			±2 μm ^*10
	Measurement accuracy			±7.5 μm ^*11
External remote input				Non-voltage input (with and without contact)
External output	OK/NG/FAIL/MEAS.			PhotoMos output Rated load: 24 VDC 0.5 A ON resistance: 50 mΩ or lower
Interface	LAN			RJ-45 (10BASE-T/100BASE-TX/1000BASE-T)
	USB 3.1			4 ports (rear: 4)
	USB 2.0 series A			4 ports (front: 2, rear: 2)
	Monitor output			DVI-D
Record	Hard disk drive			500 GB
Illumination system	Transparent			Telecentric transparent illumination
	Ring			Four division, multi-angle illumination (electric), Slit ring (directivity) illumination (electric)
XY stage	Moving range			200 × 100 mm 7.87" × 3.94" (electric)
	Withstand load			7.5 kg
Z stage	Moving range			75 mm 2.95" (electric)
Power supply	Power voltage			100 to 240 VAC ±10%, 50/60 Hz
	Power consumption			430 VA or lower
Environmental resistance	Ambient temperature			+10 to 35°C +50°F to 95°F
	Relative humidity			20 to 80% RH (no condensation)
	Overvoltage category			II
	Pollution degree			2
Weight				Approx. 35 kg
^1 In the range of ø80 mm ø3.15", within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position. ^2 In the range of 280 × 180 mm 11.02" × 7.09" (4× R40 R1.57"), within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position, and with a load weighing 3 kg or less on the stage. L is the amount of stage movement (in mm inch). ^3 In the range of ø20 mm 0.79", within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position. ^4 In the range of 220 × 120 mm 8.66" × 4.72", within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position, and with a load weighing 3 kg or less on the stage. L is the amount of stage movement (in mm inch). ^5 Within the range of L218 mm × ø60 mm L8.58" × ø2.36". At the focal point position, with the part positioned in the center of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F. D is the Y direction distance (in mm inch). ^6 Within the range of L206 mm × ø20 mm L8.11" × ø0.79". At the focal point position, with the part positioned in the center of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F. D is the Y direction distance (in mm inch). ^7 When the detection system is standard. If the detection system is at a deep position, ±3 μm. ^8 When the detection system is standard, within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F, and with a load weighing 3 kg or less on the stage. If the detection system is at a deep position, ±(10 + 0.02 L) μm with L as the measurement length (in mm inch). ^9 Operating ambient temperature: +23°C ±1°C +73.4°F ±1.8°F. ^10 With a maximum measurement height of 30 mm 1.18" or less. ±3 μm when maximum measurement height is between 30 1.18" and 75 mm 2.95". ^*11 Standard glass, with a maximum measurement height of 30 mm 1.18" or less. ±9.5 μm when maximum measurement height is between 30 1.18" and 75 mm 2.95".

Keyence IM-8030 Keyence

$0.00

Sold Out

Specifications

Model				IM-8030
Type				Head
Image sensor				1" 20-megapixel monochrome CMOS
Display				12.1" LCD monitor (WXGA: 1280 × 800)
Receiver lens				Double telecentric lens
Image measurement	Field of view	Wide-field measurement mode		300 × 200 mm 11.81" × 7.87" (4× R50 R1.97")
		High-precision measurement mode		225 × 125 mm 8.86" × 4.92"
	Minimum display unit			0.1 μm
	Repeatability	Wide-field measurement mode	Without stage movement	±1 μm
			With stage movement	±2 μm
		High-precision measurement mode	Without stage movement	±0.5 μm
			With stage movement	±1.5 μm
	Measurement accuracy (±2σ)	Wide-field measurement mode	Without binding	±3.9 μm ^*1
			With binding	±(7 + 0.02 L) μm ^*2
		High-precision measurement mode	Without binding	±2 μm ^*3
			With binding	±(4 + 0.02 L) μm ^*4
	Outer diameter measurement	Measurement accuracy	Wide-field measurement mode	±(2.8 + 0.02 D) μm ^*5
			High-precision measurement mode	±(1.4 + 0.04 D) μm ^*6
Light probe measurement	Measurable area (XY)			190 × 90 mm 7.48" × 3.54"
	Maximum measurement depth			30 mm 1.18"
	Light probe diameter			ø3 mm ø0.12"
	Measuring force			0.015 N
	Repeatability			±2 μm ^*7
	Measurement accuracy			±(8 + 0.02 L) μm ^*8
External remote input				Non-voltage input (with and without contact)
External output	OK/NG/FAIL/MEAS.			PhotoMos output Rated load: 24 VDC 0.5 A ON resistance: 50 mΩ or lower
Interface	LAN			RJ-45 (10BASE-T/100BASE-TX/1000BASE-T)
	USB 3.1			4 ports (rear: 4)
	USB 2.0 series A			4 ports (front: 2, rear: 2)
	Monitor output			DVI-D
Record	Hard disk drive			500 GB
Illumination system	Transparent			Telecentric transparent illumination
	Ring			Four division, multi-angle illumination (electric), Slit ring (directivity) illumination (electric)
XY stage	Moving range			200 × 100 mm 7.87" × 3.94" (electric)
	Withstand load			7.5 kg
Z stage	Moving range			75 mm 2.95" (electric)
Power supply	Power voltage			100 to 240 VAC ±10%, 50/60 Hz
	Power consumption			430 VA or lower
Environmental resistance	Ambient temperature			+10 to 35°C +50°F to 95°F
	Relative humidity			20 to 80% RH (no condensation)
	Overvoltage category			II
	Pollution degree			2
Weight				Approx. 33 kg
^1 In the range of ø80 mm ø3.15", within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position. ^2 In the range of 280 × 180 mm 11.02" × 7.09" (4× R40 R1.57"), within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position, and with a load weighing 3 kg or less on the stage. L is the amount of stage movement (in mm inch). ^3 In the range of ø20 mm 0.79", within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position. ^4 In the range of 220 × 120 mm 8.66" × 4.72", within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position, and with a load weighing 3 kg or less on the stage. L is the amount of stage movement (in mm inch). ^5 Within the range of L218 mm × ø60 mm L8.58" × ø2.36". At the focal point position, with the part positioned in the center of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F. D is the Y direction distance (in mm inch). ^6 Within the range of L206 mm × ø20 mm L8.11" × ø0.79". At the focal point position, with the part positioned in the center of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F. D is the Y direction distance (in mm inch). ^7 When the detection system is standard. If the detection system is at a deep position, ±3 μm. ^8 When the detection system is standard, within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F, and with a load weighing 3 kg or less on the stage. If the detection system is at a deep position, ±(10 + 0.02 L) μm with L as the measurement length (in mm inch).

Keyence IM-8020 Keyence

$0.00

Sold Out

Specifications

Model				IM-8020
Type				Head
Image sensor				1" 20-megapixel monochrome CMOS
Display				12.1" LCD monitor (WXGA: 1280 × 800)
Receiver lens				Double telecentric lens
Image measurement	Field of view	Wide-field measurement mode		200 × 200 mm 7.87" × 7.87" (4× R50 R1.97")
		High-precision measurement mode		125 × 125 mm 4.92" × 4.92"
	Minimum display unit			0.1 μm
	Repeatability	Wide-field measurement mode	Without stage movement	±1 μm
			With stage movement	±2 μm
		High-precision measurement mode	Without stage movement	±0.5 μm
			With stage movement	±1.5 μm
	Measurement accuracy (±2σ)	Wide-field measurement mode	Without binding	±3.9 μm ^*1
			With binding	±(7 + 0.02 L) μm ^*2
		High-precision measurement mode	Without binding	±2 μm ^*3
			With binding	±(4 + 0.02 L) μm ^*4
	Outer diameter measurement	Measurement accuracy	Wide-field measurement mode	±(2.8 + 0.02 D) μm ^*5
			High-precision measurement mode	±(1.4 + 0.04 D) μm ^*6
Light probe measurement	Measurable area (XY)			90 × 90 mm 3.54" × 3.54"
	Maximum measurement depth			30 mm 1.18"
	Light probe diameter			ø3 mm ø0.12"
	Measuring force			0.015 N
	Repeatability			±2 μm ^*7
	Measurement accuracy			±(8 + 0.02 L) μm ^*8
External remote input				Non-voltage input (with and without contact)
External output	OK/NG/FAIL/MEAS.			PhotoMos output Rated load: 24 VDC 0.5 A ON resistance: 50 mΩ or lower
Interface	LAN			RJ-45 (10BASE-T/100BASE-TX/1000BASE-T)
	USB 3.1			4 ports (rear: 4)
	USB 2.0 series A			4 ports (front: 2, rear: 2)
	Monitor output			DVI-D
Record	Hard disk drive			500 GB
Illumination system	Transparent			Telecentric transparent illumination
	Ring			Four division, multi-angle illumination (electric), Slit ring (directivity) illumination (electric)
XY stage	Moving range			100 × 100 mm 3.94" × 3.94" (electric)
	Withstand load			5 kg
Z stage	Moving range			75 mm 2.95" (electric)
Power supply	Power voltage			100 to 240 VAC ±10%, 50/60 Hz
	Power consumption			430 VA or lower
Environmental resistance	Ambient temperature			+10 to 35°C +50°F to 95°F
	Relative humidity			20 to 80% RH (no condensation)
	Overvoltage category			II
	Pollution degree			2
Weight				Approx. 30 kg
^1 In the range of ø80 mm ø3.15", within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position. ^2 In the range of 180 × 180 mm 7.09" × 7.09" (4× R40 R1.57"), within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position, and with a load weighing 2 kg or less on the stage. L is the amount of stage movement (in mm inch). ^3 In the range of ø20 mm 0.79", within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position. ^4 In the range of 120 × 120 mm 4.72" × 4.72", within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position, and with a load weighing 2 kg or less on the stage. L is the amount of stage movement (in mm inch). ^5 Within the range of L118 mm × ø60 mm L4.65" × ø2.36". At the focal point position, with the part positioned in the center of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F. D is the Y direction distance (in mm inch). ^6 Within the range of L106 mm × ø20 mm L4.17" × ø0.79". At the focal point position, with the part positioned in the center of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F. D is the Y direction distance (in mm inch). ^7 When the detection system is standard. If the detection system is at a deep position, ±3 μm. ^8 When the detection system is standard, within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F, and with a load weighing 2 kg or less on the stage. If the detection system is at a deep position, ±(10 + 0.02 L) μm with L as the measurement length (in mm inch).

Keyence IM-8010 Keyence

$0.00

Sold Out

Specifications

Model				IM-8010
Type				Head
Image sensor				1" 20 megapixel monochrome CMOS
Display				12.1" LCD monitor (WXGA: 1280 x 800)
Receiver lens				Double telecentric lens
Image measurement	Field of view	Wide-field measurement mode		200 mm × 200 mm (quadangle R50)
		High-precision measurement mode		125 mm×125 mm
	Minimum display unit			0.1 µm
	Repeatability	Wide-field measurement mode	Without stage movement	±1 µm
			With stage movement	±2 µm
		High-precision measurement mode	Without stage movement	±0.5 µm
			With stage movement	±1.5 µm
	Measurement accuracy (±2σ)	Wide-field measurement mode	Without binding	±3.9 µm^*1
			With binding	±(7+0.02L) µm^*2
		High-precision measurement mode	Without binding	±2µm^*3
			With binding	±(4+0.02L) µm^*4
	Outer diameter measurement	Measurement accuracy	Wide-field measurement mode	±(2.8+0.02D) µm^*5
			High-precision measurement mode	±(1.4+0.04D) µm^*6
External remote input				Non-voltage input (contact/solid-state)
External output	OK/NG/FAIL/MEAS.			PhotoMOS output Rated load: 24 VDC, 0.5 A ON resistance: 50 mΩ or less
External illumination control	Intensity control			PWM control 100 kHz
	Output voltage			DC12V
	Output current			1.6 A (max.)
Interface	LAN			RJ-45 (10BASE-T/100BASE-TX/1000BASE-T)
	USB 3.1			4 ports (Rear: 4)
	USB 2.0 series A			4 ports (Front: 2, Rear: 2)
	Monitor output			DVI-D
Record	Hard disk drive			500 GB
Illumination system	Transparent			Telecentric transmissive illumination
	Ring			Four division multi-angle illumination (motorized) Slit ring (directional) illumination (motorized)
XY stage	Moving range			100 mm × 100 mm (motorized)
	Withstand load			5 kg
Z stage	Moving range			75 mm (motorized)
Power supply	Power voltage			100 to 240 V ±10% 50/60Hz
	Power consumption			430 VA max.
Environmental resistance	Ambient temperature			+10 to 35°C^*7
	Relative humidity			20 to 80% RH (no condensation)
	Overvoltage category			II
	Pollution degree			2
Weight				Approx. 30 kg
^1 In the range of ø80 mm and the operating ambient temperature range of +23 ± 1°C at the focused focal point position ^2 In the range of 180 mm × 180 mm (quadangle R40), when the operating ambient temperature range of +23±1°C at the focused focal point position, and when the loading weight on the stage is 2 kg or less. L is a stage movement (mm). ^3 In the range of ø20 mm and the operating ambient temperature range of +23 ± 1°C at the focused focal point position. ^4 In the range of 120 mm × 120 mm, when the operating ambient temperature range of +23±1°C at the focused focal point position, and when the loading weight on the stage is 2 kg or less. L is a stage movement (mm). ^5 Range of L118 mm × ø60 mm. When the target is placed on the center of the lens field of view at the focal point and the target axis direction is facing the horizontal lens field of view. When the operating ambient temperature range is +23 ± 1°C and D is the Y direction distance (mm). ^6 Range of L106 mm × ø20 mm. When the target is placed on the center of the lens field of view at the focal point and the target axis direction is facing the horizontal lens field of view. When the operating ambient temperature range is +23 ± 1°C and D is the Y direction distance (mm). ^*7 +15 to 35 when the XY stage speed is 80 mm/s.

Keyence IM-8005 Keyence

$0.00

Sold Out

Specifications

Model				IM-8005
Type				Head
Image sensor				1" 20-megapixel monochrome CMOS
Display				12.1" LCD monitor (WXGA: 1280 × 800)
Receiver lens				Double telecentric lens
Image measurement	Field of view	Wide-field measurement mode		ø100 mm ø3.94"
		High-precision measurement mode		25 × 25 mm 0.98" × 0.98"
	Minimum display unit			0.1 μm
	Repeatability	Wide-field measurement mode	Without stage movement	±1 μm
			With stage movement	—
		High-precision measurement mode	Without stage movement	±0.5 μm
			With stage movement	—
	Measurement accuracy (±2σ)	Wide-field measurement mode	Without binding	±3.9 μm ^*1
			With binding	—
		High-precision measurement mode	Without binding	±2 μm ^*2
			With binding	—
	Outer diameter measurement	Measurement accuracy	Wide-field measurement mode	±(2.8 + 0.02 D) μm ^*3
			High-precision measurement mode	±(1.4 + 0.04 D) μm ^*4
Light probe measurement	Measurable area (XY)			—
	Maximum measurement depth
	Light probe diameter
	Measuring force
	Repeatability
	Measurement accuracy
External remote input				Non-voltage input (with and without contact)
External output	OK/NG/FAIL/MEAS.			PhotoMos output Rated load: 24 VDC 0.5 A ON resistance: 50 mΩ or lower
Interface	LAN			RJ-45 (10BASE-T/100BASE-TX/1000BASE-T)
	USB 3.1			4 ports (rear: 4)
	USB 2.0 series A			4 ports (front: 2, rear: 2)
	Monitor output			DVI-D
Record	Hard disk drive			500 GB
Illumination system	Transparent			Telecentric transparent illumination
	Ring			Four division ring illumination
XY stage	Moving range			—
	Withstand load			5 kg
Z stage	Moving range			75 mm 2.95" (electric)
Power supply	Power voltage			100 to 240 VAC ±10%, 50/60 Hz
	Power consumption			430 VA or lower
Environmental resistance	Ambient temperature			+10 to 35°C +50°F to 95°F
	Relative humidity			20 to 80% RH (no condensation)
	Overvoltage category			II
	Pollution degree			2
Weight				Approx. 24 kg
^1 In the range of ø80 mm ø3.15", within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position. ^2 In the range of ø20 mm 0.79", within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position. ^3 Within the range of L18 mm × ø60 mm L0.71" × ø2.36". At the focal point position, with the part positioned in the center of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F. D is the Y direction distance (in mm inch). ^4 Within the range of L6 mm × ø20 mm L0.24" × ø0.79". At the focal point position, with the part positioned in the center of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F. D is the Y direction distance (in mm inch).

Keyence IM-8001 Keyence

$0.00

Sold Out

Specifications

Model				IM-8001
Type				Controller
Image sensor				1" 20-megapixel monochrome CMOS
Display				12.1" LCD monitor (WXGA: 1280 × 800)
Receiver lens				Double telecentric lens
Image measurement	Field of view	Wide-field measurement mode		IM-8005: ø100 mm ø3.94" IM-8020: 200 × 200 mm 7.87" × 7.87" (4× R50 R1.97") IM-8030: 300 × 200 mm 11.81" × 7.87" (4× R50 R1.97")
		High-precision measurement mode		IM-8005: 25 × 25 mm 0.98" × 0.98" IM-8020: 125 × 125 mm 4.92" × 4.92" IM-8030: 225 × 125 mm 8.86" × 4.92"
	Minimum display unit			0.1 μm
	Repeatability	Wide-field measurement mode	Without stage movement	±1 μm
			With stage movement	IM-8005: — IM-8020: ±2 μm IM-8030: ±2 μm
		High-precision measurement mode	Without stage movement	±0.5 μm
			With stage movement	IM-8005: — IM-8020: ±1.5 μm IM-8030: ±1.5 μm
	Measurement accuracy (±2σ)	Wide-field measurement mode	Without binding	±3.9 μm ^*1
			With binding	IM-8005: — IM-8020: ±(7 + 0.02 L) μm ^2 IM-8030: ±(7 + 0.02 L) μm ^3
		High-precision measurement mode	Without binding	±2 μm ^*4
			With binding	IM-8005: — IM-8020: ±(4 + 0.02 L) μm ^5 IM-8030: ±(4 + 0.02 L) μm ^6
	Outer diameter measurement	Measurement accuracy	Wide-field measurement mode	IM-8005: ±(2.8 + 0.02 D) μm ^7 IM-8020: ±(2.8 + 0.02 D) μm ^8 IM-8030: ±(2.8 + 0.02 D) μm ^*9
			High-precision measurement mode	IM-8005: ±(1.4 + 0.04 D) μm ^10 IM-8020: ±(1.4 + 0.04 D) μm ^11 IM-8030: ±(1.4 + 0.04 D) μm ^*12
Light probe measurement	Measurable area (XY)			IM-8005: — IM-8020: 90 × 90 mm 3.54" × 3.54" IM-8030: 190 × 90 mm 7.48" × 3.54"
	Maximum measurement depth			IM-8005: — IM-8020: 30 mm 1.18" IM-8030: 30 mm 1.18"
	Light probe diameter			IM-8005: — IM-8020: ø3 mm ø0.12" IM-8030: ø3 mm ø0.12"
	Measuring force			IM-8005: — IM-8020: 0.015 N IM-8030: 0.015 N
	Repeatability			IM-8005: — IM-8020: ±2 μm ^13 IM-8030: ±2 μm ^13
	Measurement accuracy			IM-8005: — IM-8020: ±(8 + 0.02 L) μm ^14 IM-8030: ±(8 + 0.02 L) μm ^15
External remote input				Non-voltage input (with and without contact)
External output	OK/NG/FAIL/MEAS.			PhotoMos output Rated load: 24 VDC 0.5 A ON resistance: 50 mΩ or lower
Interface	LAN			RJ-45 (10BASE-T/100BASE-TX/1000BASE-T)
	USB 3.1			4 ports (rear: 4)
	USB 2.0 series A			4 ports (front: 2, rear: 2)
	Monitor output			DVI-D
Record	Hard disk drive			500 GB
Illumination system	Transparent			Telecentric transparent illumination
	Ring			IM-8005: Four division ring illumination IM-8020: Four division, multi-angle illumination (electric), Slit ring (directivity) illumination (electric) IM-8030: Four division, multi-angle illumination (electric), Slit ring (directivity) illumination (electric)
XY stage	Moving range			IM-8005: — IM-8020: 100 × 100 mm 3.94" × 3.94" (electric) IM-8030: 200 × 100 mm 7.87" × 3.94" (electric)
	Withstand load			IM-8005: 5 kg IM-8020: 5 kg IM-8030: 7.5 kg
Z stage	Moving range			75 mm 2.95" (electric)
Power supply	Power voltage			100 to 240 VAC ±10%, 50/60 Hz
	Power consumption			430 VA or lower
Environmental resistance	Ambient temperature			+10 to 35°C +50°F to 95°F
	Relative humidity			20 to 80% RH (no condensation)
	Overvoltage category			II
	Pollution degree			2
Weight				Approx. 8 kg
^1 In the range of ø80 mm ø3.15", within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position. ^2 In the range of 180 × 180 mm 7.09" × 7.09" (4× R40 R1.57"), within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position, and with a load weighing 2 kg or less on the stage. L is the amount of stage movement (in mm inch). ^3 In the range of 280 × 180 mm 11.02" × 7.09" (4× R40 R1.57"), within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position, and with a load weighing 3 kg or less on the stage. L is the amount of stage movement (in mm inch). ^4 In the range of ø20 mm 0.79", within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position. ^5 In the range of 120 × 120 mm 4.72" × 4.72", within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position, and with a load weighing 2 kg or less on the stage. L is the amount of stage movement (in mm inch). ^6 In the range of 220 × 120 mm 8.66" × 4.72", within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F at the focal point position, and with a load weighing 3 kg or less on the stage. L is the amount of stage movement (in mm inch). ^7 Within the range of L18 mm × ø60 mm L0.71" × ø2.36". At the focal point position, with the part positioned in the center of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F. D is the Y direction distance (in mm inch). ^8 Within the range of L118 mm × ø60 mm L4.65" × ø2.36". At the focal point position, with the part positioned in the center of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F. D is the Y direction distance (in mm inch). ^9 Within the range of L218 mm × ø60 mm L8.58" × ø2.36". At the focal point position, with the part positioned in the center of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F. D is the Y direction distance (in mm inch). ^10 Within the range of L6 mm × ø20 mm L0.24" × ø0.79". At the focal point position, with the part positioned in the center of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F. D is the Y direction distance (in mm inch). ^11 Within the range of L106 mm × ø20 mm L4.17" × ø0.79". At the focal point position, with the part positioned in the center of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F. D is the Y direction distance (in mm inch). ^12 Within the range of L206 mm × ø20 mm L8.11" × ø0.79". At the focal point position, with the part positioned in the center of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F. D is the Y direction distance (in mm inch). ^13 When the detection system is standard. If the detection system is at a deep position, ±3 μm. ^14 When the detection system is standard, within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F, and with a load weighing 2 kg or less on the stage. If the detection system is at a deep position, ±(10 + 0.02 L) μm with L as the measurement length (in mm inch). ^*15 When the detection system is standard, within the operating ambient temperature range of +23 ±1°C +73.4°F ±1.8°F, and with a load weighing 3 kg or less on the stage. If the detection system is at a deep position, ±(10 + 0.02 L) μm with L as the measurement length (in mm inch).

Keyence OP-89092 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89091 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89090 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89073 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89072 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89071 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89070 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89069 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89068 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89067 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89064 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89063 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89059 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89058 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Page 1 / 4Next

Filters

In stock (0)
Out of stock (74)