Modules

634 products

Showing 169 - 192 of 634 products

Showing 169 - 192 of 634 products
View
TM5SDC1FS Schneider Electric
Schneider TM5SDC1FS Schneider Electric
$1,425.21
Only 2 units left

This product is part of the Modicon TM5 range, an High-Performance and Safe IP20 Modular I/O System. This safety counter module provides 1 input, 24V DC, sink, A-A, A-B, A-A’-B-B’ wiring modes, 7kHz maximum. There is an isolation between channel and bus at 500V AC. This safety module, associated with TM5CSLC safety logic controller provides distributed safety solutions on Sercos bus up to SIL 3, Cat. 4, PL e, SIL CL3. It features 2 LEDs for power supply, 2 LEDs for safety status and 20 LEDs for input status signaling. It is furnished with 2 wires for electrical connection. Its housing colour is red. It weighs 0.052kg. It measure 75mm deep, 25mm wide, 99mm high. The Modicon TM5 meets the typical requirements of production and packaging machinery, as well as material handling and assembly systems. This product is certified by GOST-R, C-Tick, cULus and CSA. It meets IEC 61131-2, UL 508, CSA C22.2 No 213 and CSA C22.2 No 142 standards. It is compatible with Modicon TM5CSLC safety logic controller. It is installed by mounting on a 35mm DIN rail. This modular IO system provides a flexible and scalable configuration of remote or distributed IO islands by connection with Modicon and PacDrive 3 controllers. Flexible and scalable, designed for complex machines.

Main

Characteristic Value(s)
Range of Product Modicon TM5
Product or Component Type Counter module
Function of module Safety-related counter channel
24 V DC encoder power supply
Discrete input number 1
Counting frequency 7 kHz

Complementary

Characteristic Value(s)
Range Compatibility Modicon M258
Modicon LMC058
Product Compatibility Logic controller
Motion controller
Maximum cycle time 2 ms
Isolation 500 Vrms AC insulation between channel and bus
Discrete input logic Sink
Discrete input voltage 24 V DC
Discrete input current 2.48 mA 24 V
Input resistance 9.68 kOhm
Input filtering <= 0.01 ms hardware
<= 100 ms configurable by software
Current consumption 50 mA 5 V DC bus
32 mA 24 V DC input/output
Maximum power dissipation in W 0.25 W
0.75 W
Marking CE
Product Weight 0.115 lb(US) (0.052 kg)
TSXISPY101C Schneider Electric
Schneider TSXISPY101C Schneider Electric
$0.00
Sold Out

Main

Characteristic Value(s)
Range of Product Modicon Premium Automation platform
Product or Component Type ISP Plus weighing module

Complementary

Characteristic Value(s)
Number of measurement input 1
Resolution 1048576 points
Analogue input resolution 20 bits
Measuring rate 50 measurements per second
Input impedance > 1 MOhm
Input compatibility Load cell 1…8 350 Ohm yes <984.3 ft (300 m)
Sensor power supply 10 V DC
Output compatibility Discrete reflex 2 positive
Discrete output voltage 24 V DC
Discrete output current 500 mA
Response time on output 1 ms
Transmission rate 9.6 kbit/s RS485 non isolated <= 30 m discrete reflex weight indicator
Voltage division 1 µV
Electrical connection 1 connector screw terminal block for connecting 2 discrete reflex
1 female connector SUB-D 15 for the indicator input
1 female connector SUB-D 9 for RS485 serial link to the weight indicator
Marking CE
Current consumption 145 mA 24 V rack
150 mA 5 V DC
Module format Standard
Product Weight 0.93 lb(US) (0.42 kg)
TSXDMZ64DTK Schneider Electric
Schneider TSXDMZ64DTK Schneider Electric
$481.70
In stock, 11 units

TSX Micro Discrete solid state I/O base DC - 64 I/O solid state
TSXDSY16S4C Schneider Electric
Schneider TSXDSY16S4C Schneider Electric
$0.00
Sold Out

Main

Characteristic Value(s)
Range of Product Modicon Premium Automation platform
Product or Component Type Discrete output module
Discrete output number 16
Discrete output type Triac not protected
Discrete output voltage 24...120 V AC EN/IEC 61131-2 20...132 V

Complementary

Characteristic Value(s)
Current per channel 1 A
Maximum current per module 12 A
Response time < 10 ms (activation)
< 10 ms (deactivation)
Output overvoltage protection Ge-Mov
Output overload protection 10 A, non interchangeable fireproof protection fast blow
isalotion resistance > 10 MOhm 500 V
Power dissipation (0.85 W + 1 W x No of outputs x current per module)
Marking CE
Electrical connection Screw terminal block
Current consumption 220 mA 5 V DC
Module format Standard
Product Weight 0.84 lb(US) (0.38 kg)
TSXDSY08T2C Schneider Electric
Schneider TSXDSY08T2C Schneider Electric
$0.00
Sold Out

Main

Characteristic Value(s)
Range of Product Modicon Premium Automation platform
Product or Component Type Discrete output module
Discrete output number 8
Discrete output type Solid state protected
Discrete output voltage 24 V DC positive EN/IEC 61131-2 19...30 V
Discrete output current 500 mA

Complementary

Characteristic Value(s)
Current per channel 0.625 A
Maximum current per module 4 A
Maximum leakage current 0.5 mA at state 0
[Ures] residual voltage 1.2 V
Response time 1.2 ms
Switching frequency 0.5/LI² Hz
Output overvoltage protection By transil diode
Reverse polarity protection Reverse mounted diode
Output overload protection Electronic tripping on reactivation
Short-circuit protection Electronic tripping on reactivation
Preactuator voltage detection threshold 16 V
Minimum load impedance 48 W
isalotion resistance > 10 MOhm 500 V
Power dissipation (1 W + 0.75 W x No of outputs x current per module)
Marking CE
Electrical connection Screw terminal block
Current consumption 55 mA 5 V DC
Module format Standard
Product Weight 0.71 lb(US) (0.32 kg)
TSXAEY414C Schneider Electric
Schneider TSXAEY414C Schneider Electric
$0.00
Sold Out

Main

Characteristic Value(s)
Range of Product Modicon Premium Automation platform
Product or Component Type Analog input module
Input level Low level
Analogue input number 4
Analogue input type Current 4...20 mA
Voltage +/- 10 V
Voltage 0...10 V
Voltage 0...5 V
Voltage 1...5 V
Thermocouple thermocouple B
Thermocouple thermocouple E
Thermocouple thermocouple J
Thermocouple thermocouple K
Thermocouple thermocouple L
Thermocouple thermocouple N
Thermocouple thermocouple R
Thermocouple thermocouple S
Thermocouple thermocouple T
Thermocouple thermocouple U
Resistor 0...3850 Ohm
Resistor 0...400 Ohm
Temperature probe Ni 1000 2 wires
Temperature probe Ni 1000 4 wires
Temperature probe Pt 100 2 wires
Temperature probe Pt 100 4 wires
Temperature probe Pt 1000 2 wires
Temperature probe Pt 1000 4 wires
Voltage - 13...63 mV
Voltage +/- 5 V
Analog/digital conversion 16 bits

Complementary

Characteristic Value(s)
Nominal read cycle time 550 ms
Measurement error 0.13 % of full scale 0...400 Ohm 25 °C
0.16 % of full scale 0...10 V 25 °C
0.19 % of full scale - 13...63 mV 25 °C
0.22 % of full scale 0...3850 Ohm 25 °C
0.22 % of full scale 0...5 V 25 °C
0.27 % of full scale +/- 10 V 25 °C
0.27 % of full scale +/- 5 V 25 °C
0.27 % of full scale 0...400 Ohm 0...60 °C
0.27 % of full scale 1...5 V 25 °C
0.39 % of full scale 0...10 V 0...60 °C
0.44 % of full scale - 13...63 mV 0...60 °C
0.45 % of full scale 0...5 V 0...60 °C
0.45 % of full scale 4...20 mA 25 °C
0.48 % of full scale 0...3850 Ohm 0...60 °C
0.5 % of full scale +/- 10 V 0...60 °C
0.5 % of full scale +/- 5 V 0...60 °C
0.56 % of full scale 1...5 V 0...60 °C
0.86 % of full scale 4...20 mA 0...60 °C
1.5 °C thermocouple B external 25 °C
1.5 °C thermocouple E external 25 °C
1.5 °C thermocouple T external 25 °C
1.5 °C thermocouple U external 25 °C
1.8 °C thermocouple J external 25 °C
10.5 °C thermocouple K internal 0...60 °C
11 °C thermocouple R internal 0...60 °C
12 °C thermocouple S internal 0...60 °C
2 °C thermocouple L external 25 °C
2 °C thermocouple N external 25 °C
2.3 °C thermocouple K external 25 °C
3.1 °C thermocouple U external 0...60 °C
3.2 °C thermocouple E external 0...60 °C
3.2 °C thermocouple R external 25 °C
3.2 °C thermocouple T external 0...60 °C
3.4 °C thermocouple S external 25 °C
3.5 °C thermocouple B external 0...60 °C
3.5 °C thermocouple B internal 25 °C
3.8 °C thermocouple J external 0...60 °C
4.1 °C thermocouple L external 0...60 °C
4.3 °C thermocouple N external 0...60 °C
4.7 °C thermocouple K external 0...60 °C
5.4 °C thermocouple U internal 25 °C
6 °C thermocouple N internal 25 °C
6 °C thermocouple R internal 25 °C
6.1 °C thermocouple E internal 25 °C
6.6 °C thermocouple S internal 25 °C
6.6 °C thermocouple T internal 25 °C
7.3 °C thermocouple J internal 25 °C
7.3 °C thermocouple U internal 0...60 °C
7.5 °C thermocouple L internal 25 °C
7.7 °C thermocouple R external 0...60 °C
7.8 °C thermocouple K internal 25 °C
8.1 °C thermocouple B internal 0...60 °C
8.1 °C thermocouple E internal 0...60 °C
8.5 °C thermocouple S external 0...60 °C
8.7 °C thermocouple N internal 0...60 °C
8.8 °C thermocouple T internal 0...60 °C
9.5 °C thermocouple J internal 0...60 °C
9.8 °C thermocouple L internal 0...60 °C
1 °C Ni 1000 25 °C
1.2 °C Pt 100 25 °C
2 °C Ni 1000 0...60 °C
2.4 °C Pt 100 0...60 °C
2.5 °C Pt 1000 25 °C
5 °C Pt 1000 0...60 °C
Isolation between channels and bus 1780 Vrms
Isolation between channels and ground 1780 Vrms
Isolation between channels 2830 Vrms
Common mode between channels 415 V AC or 200 V DC
Common mode between channels and earth 240 V AC or 110 V DC
Input overvoltage protection -15…15 V at state 0 250 Ohm
-30…30 V at state 1 250 Ohm
Electrical connection Screw terminal block
Overcurrent -25…25 mA at state 1 250 kOhm
Marking CE
Current consumption 660 mA 5 V DC
Module format Standard
Product Weight 0.71 lb(US) (0.32 kg)
TSXCTZ1B Schneider
Schneider TSXCTZ1B Schneider
$0.00
Sold Out

Modicon TSX Micro 1 CH.SSI ABSOL. ENCODER
TM7BDI16A Schneider Electric
Schneider TM7BDI16A Schneider Electric
$0.00
Sold Out

Main

Characteristic Value(s)
Range of Product Modicon TM7
Product or Component Type Discrete I/O expansion block
Range Compatibility Modicon LMC058
Modicon M258
Enclosure Material Plastic
Bus type TM7 bus
[Ue] rated operational voltage 24 V DC
Input/output number 16
input/output number of block 16 I

Complementary

Characteristic Value(s)
Discrete input number 16
Discrete input voltage 24 V
Discrete input voltage type DC
Discrete input current 7 mA
Discrete input logic Positive
Sensor power supply 24 V, 500 mA for all channels overload, short-circuit and reverse polarity protection
Electrical connection 1 male connector M12 - B coding - 4 ways bus IN
1 female connector M12 - B coding - 4 ways bus OUT
1 male connector M8 - 4 ways power IN
1 female connector M8 - 4 ways power OUT
8 female connectors M12 - 5 ways sensor
Local signalling 2 LEDs for bus diagnostic
2 LEDs for sensor power supply diagnostics
Operating position Any position
Fixing Mode By 2 screws
Product Weight 0.71 lb(US) (0.32 kg)
TSXCTZ1A Schneider Electric
Schneider TSXCTZ1A Schneider Electric
$0.00
Sold Out

Main

Characteristic Value(s)
Range of product Modicon TSX Micro automation platform
Product or component type Counter modules
Counting input number 1
Counting frequency 40 Hz
Network frequency 100 Hz
Input voltage 5 V DC
24 V DC
Input current 18 mA
Input voltage limits >= 2.4 V at state 1 5 V DC
<= 1.2 V at state 0 5 V DC
>= 11 V at state 1 24 V DC
<= 5 V at state 0 24 V DC
5.5 V 5 V DC
19...30 V 24 V DC
Current state 0 guaranteed <= 1 mA 5 V DC
<= 2 mA 24 V DC
Current state 1 guaranteed >= 6 mA 24 V DC
>= 3.7 mA 5 V DC

Complementary

Characteristic Value(s)
Response time 1.5 ms event processing
8 ms master task
Sensor power supply 2.5 V
Current consumption 15 mA
Logic input Positive
Input impedance 0.27 Ohm at 5 V DC at Un
1.4 Ohm at 24 V DC at Un
>= 0.44 Ohm at 5 V DC at U = 2.4 V
Response time 3 ms
Input type Resistive 24 V DC
Input compatibility 2-wire/3-wire proximity sensor 24 V DC
Product weight 0.2 kg
TSXDEZ12D2K Schneider Electric
Schneider TSXDEZ12D2K Schneider Electric
$926.43
Only 1 unit left

Main

Characteristic Value(s)
Range of product Modicon TSX Micro automation platform
Product or component type Discrete input module
Discrete input number 12 1 HE-10 connector
Discrete input voltage 24 V DC, discrete input logic: positive
19...30 V
Discrete input current 7 mA
Input voltage limits >= 11 V at state 1
< 5 V at state 0
Current state 0 guaranteed <= 2 mA
Current state 1 guaranteed >= 6 mA
Input impedance 3.4 Ohm
Response time 0.1...7.5 ms at state 0 to state 1
0.1...7.5 ms at state 1 to state 0

Complementary

Characteristic Value(s)
Standards IEC 1131-2 Type 2
Input compatibility 2/3-wire proximity sensors PNP/NPN
Discrete input type Current sink
Current consumption 104 mA positive
Isolation voltage 1500 V AC 1 s
TSXCTZ2A Schneider Electric
Schneider TSXCTZ2A Schneider Electric
$412.50
Only 5 units left

Main

Characteristic Value(s)
Range of product Modicon TSX Micro automation platform
Product or component type Counter modules
Counting input number 2
Counting frequency 40 Hz
Network frequency 100 Hz
Input voltage 5 V DC
24 V DC
Input current 18 mA
Input voltage limits >= 2.4 V at state 1 5 V DC
<= 1.2 V at state 0 5 V DC
>= 11 V at state 1 24 V DC
<= 5 V at state 0 24 V DC
5.5 V 5 V DC
19...30 V 24 V DC
Current state 0 guaranteed <= 1 mA 5 V DC
<= 2 mA 24 V DC
Current state 1 guaranteed >= 6 mA 24 V DC
>= 3.7 mA 5 V DC

Complementary

Characteristic Value(s)
Response time 1.5 ms event processing
8 ms master task
Sensor power supply 2.5 V
Current consumption 15 mA
Logic input Positive
Input impedance 0.27 Ohm at 5 V DC at Un
1.4 Ohm at 24 V DC at Un
>= 0.44 Ohm at 5 V DC at U = 2.4 V
Response time 3 ms
Input type Resistive 24 V DC
Input compatibility 2-wire/3-wire proximity sensor 24 V DC
Product weight 0.21 kg
TSXCTY2CC Schneider Electric
Schneider TSXCTY2CC Schneider Electric
$0.00
Sold Out

Main

Characteristic Value(s)
Range of Product Modicon Premium Automation platform
Product or Component Type Measurement and counter module
I/O modularity 2 channels
Electrical circuit type Auxiliary output

Complementary

Characteristic Value(s)
Counting frequency 1000000 Hz
Incremental encoder frequency x1 500 kHz
Incremental encoder frequency x 4 250 kHz
Power dissipation in W 7…10 W
Cycle time 1 ms
Discrete input logic Current sink auxiliary input (preset, enable and read) IEC 1131 Type 2
Resistive 2/3-wire proximity sensors PNP/NPN IEC 1131 Type 2
Resistive encoder input
Input logic Positive
Input compatibility Absolute encoder parallel output ABE7CPA11
Incremental encoder 10...30 V totem pole
Incremental encoder 5 V DC RS422
Absolute encoder SSI serial output
Input voltage 24 V 16 mA 2/3-wire proximity sensors PNP/NPN
24 V 8 mA auxiliary input (preset, enable and read)
5 V 18 mA encoder input
Input voltage limits <= 5.5 V encoder input
19...30 V 2/3-wire proximity sensors PNP/NPN
19...30 V auxiliary input (preset, enable and read)
Voltage state 1 guaranteed >= 11 V 2/3-wire proximity sensors PNP/NPN
>= 11 V auxiliary input (preset, enable and read)
>= 2.4 V encoder input
Current state 1 guaranteed >= 6 mA 2/3-wire proximity sensors PNP/NPN)
>= 6 mA auxiliary input (preset, enable and read))
>= 3.6 mA encoder input)
Voltage state 0 guaranteed <= 1.2 V encoder input
<= 5 V 2/3-wire proximity sensors PNP/NPN
<= 5 V auxiliary input (preset, enable and read)
Current state 0 guaranteed <= 1 mA encoder input)
<= 2 mA 2/3-wire proximity sensors PNP/NPN)
<= 2 mA auxiliary input (preset, enable and read))
Response time < 10 ms sensor voltage at return of 24 V auxiliary input (preset, enable and read)
< 2.5 ms sensor voltage at loss of 24 V auxiliary input (preset, enable and read)
Input impedance Encoder input > 270 Ohm at U = 2.4 V
2/3-wire proximity sensors PNP/NPN 1500 Ohm at Un
Auxiliary input (preset, enable and read) 3400 Ohm at Un
Encoder input 400 Ohm at Un
Output voltage 24 V DC
nominal output current 0.5 A
Output voltage limits 19...30 V
Maximum voltage drop <0.5 V at state 1
Output compatibility Positive logic DC inputs (resistance <= 15 kOhm) auxiliary output
Maximum leakage current 0.1 mA
Switching time < 0.250 ms
Switching frequency < 0.6/LI² Hz on inductive load
Output overload protection Thermal tripping via program or automatically
Current limiter
Output short-circuit protection Thermal tripping via program or automatically
Current limiter
Output overvoltage protection Zener diode
Reverse polarity protection Reverse diode on supply
Checks Sensor power supply
Current consumption 15 mA 24 V DC
850 mA 5 V DC
Module format Standard
Local signalling 1 LED (green) for module operating (RUN)
1 LED (red) for external fault (I/O)
1 LED (red) for internal fault, module failure (ERR)
2 LEDs (green) for axis diagnostics available (CH.)
Electrical connection 1 connector HE-10, 20 pins
2 connectors SUB-D 15
Product Weight 0.75 lb(US) (0.34 kg)
TSXDEZ12D2 Schneider
Schneider TSXDEZ12D2 Schneider
$533.34
In stock, 16 units

TSX Micro - 12 Discret Input DC
TSXDEY64D2KC Schneider Electric
Schneider TSXDEY64D2KC Schneider Electric
$0.00
Sold Out

Main

Characteristic Value(s)
Range of Product Modicon Premium Automation platform
Product or Component Type Discrete input module
Discrete input number 64 current sink isolated EN/IEC 61131-2 type 1
Discrete input voltage 24 V DC positive
Sensor power supply 19…30 V
Discrete input current 3.5 mA

Complementary

Characteristic Value(s)
Voltage state 1 guaranteed >= 11 V
Current state 1 guaranteed >= 3 mA
Voltage state 0 guaranteed <= 5 V
Current state 0 guaranteed <= 1.5 mA
Input impedance 6300 Ohm at state 1
Response Time <= 7 ms
4 ms
isalotion resistance < 10 MOhm 500 V DC
Power dissipation (1.5 W + 0.1 W x No of channels used)
Electrical Connection HE-10 connector
Marking CE
Current consumption 155 mA 5 V DC
315 mA 24 V DC
Module format Standard
Product Weight 0.82 lb(US) (0.37 kg)
TSXDEY16A5C Schneider Electric
Schneider TSXDEY16A5C Schneider Electric
$0.00
Sold Out

Main

Characteristic Value(s)
Range of Product Modicon Premium Automation platform
Product or Component Type Discrete input module
Discrete input number 16 current sink isolated EN/IEC 61131-2 type 2
Discrete input voltage 24 V DC positive
Sensor power supply 19…30 V
Input compatibility With 2-wire/3-wire proximity sensors EN/IEC 60947-5-2
Discrete input current 7 mA

Complementary

Characteristic Value(s)
Voltage state 1 guaranteed >= 11 V
Current state 1 guaranteed >= 6.5 mA
Voltage state 0 guaranteed <= 5 V
Current state 0 guaranteed <= 2 mA
Input impedance 4000 Ohm at state 1
Response Time 4 ms
<= 7 ms
isalotion resistance < 10 MOhm 500 V DC
Power dissipation (1 W + 0.15 W x No of channels used)
Electrical Connection Screw terminal
Marking CE
Current consumption 80 mA 5 V DC
Module format Standard
Product Weight 0.7 lb(US) (0.3 kg)
TSXCFY21 Schneider Electric
Schneider TSXCFY21 Schneider Electric
$3,180.80
Only 6 units left

Main

Characteristic Value(s)
Range of Product Modicon Premium Automation platform
Product or Component Type Motion control module
Product Specific Application For stepper motors
Software Designation Unity Pro

Complementary

Characteristic Value(s)
I/O modularity 2 axes
Maximum pulse frequency 187 kHz
Power dissipation in W 5.6 W
Input type Current sink auxiliary input EN/IEC 61131 type 2
Resistive amplifier input
Discrete input logic Negative amplifier input
Positive auxiliary input
Input voltage 24 V 7 mA auxiliary input
5 V 4.5 mA amplifier input
Input voltage limits 19...30 V auxiliary input
Voltage state 1 guaranteed < 2 V amplifier input
>= 11 V auxiliary input
Current state 1 guaranteed >= 6 mA auxiliary input)
Voltage state 0 guaranteed <= 5 V auxiliary input
> 3.6 V amplifier input
Current state 0 guaranteed <= 2 mA auxiliary input)
Input impedance 3400 Ohm auxiliary input
Input immunity < 250 µs auxiliary input for homing cam and event inputs
15...30 µs amplifier input for loss of step input
3000...10000 µs auxiliary input for limit switch, emergency stop and external stop inputs
3000...16000 µs amplifier input for amplifier fault input
Power supply monitoring 0…14 V auxiliary input at fault state
18…24 V auxiliary input at OK state
Maximum detection time < 30 ms auxiliary input from fault to OK state
> 1 ms auxiliary input from OK to fault state
Input compatibility With 2-wire/3-wire sensor auxiliary input
Output type Open collector PNP brake output EN/IEC 61131-2
RS422, TTL 5 V open collector NPN compatible amplifier output
Output differential voltage +/- 2 V <= 100 Ohm amplifier output
Maximum output short-circuit current 150 mA amplifier output
Permissible common mode voltage 7 V amplifier output
Maximum permissible differential voltage 12 V amplifier output
Output voltage 24 V DC 19...30 V brake output
Nominal output current 0.5 A <0.3 mA 0.625 A brake output
Maximum voltage drop <1 V at state on brake output
Switching time < 0.25 ms brake output
Output compatibility Positive logic DC inputs (resistance <= 15 kOhm) brake output
Short-circuit protection Thermal tripping via program or automatically brake output
Output overload protection Current limiter brake output
Output overvoltage protection Zener diode brake output
Reverse polarity protection Brake output reverse mounted diode on supply
Speed profile path Trapezoidal
Operating Mode Manually
AUTO
OFF
Direct drive mode
Checks Sensor power supply
Consistency of commands
Validity of parameters
Short circuit (one signalling bit per channel)
Correct execution by software position limits, loss of step
Amplifier, limits switches, emergency stop
Optional commands Brake
Boost
Local signalling 1 LED (green) for module operating (RUN)
1 LED (red) for external fault (I/O)
1 LED (red) for internal fault, module failure (ERR)
2 LEDs (green) for axis diagnostics available (CH.)
Electrical connection 1 connector HE-10, 20 pins
2 connectors SUB-D 15
Current consumption 100 mA 24 V DC
650 mA 5 V DC
Module format Standard
Product Weight 1.06 lb(US) (0.48 kg)
TSXCTZ2AA Schneider
Schneider TSXCTZ2AA Schneider
$0.00
Sold Out

Main

Characteristic Value(s)
Range of product Modicon TSX Micro automation platform
Product or component type Counter modules
Counting input number 2
Counting frequency 500 Hz
Network frequency 100 Hz
Input voltage 5 V DC
24 V DC
Input current 18 mA
Input voltage limits >= 2.4 V at state 1 5 V DC
<= 1.2 V at state 0 5 V DC
>= 11 V at state 1 24 V DC
<= 5 V at state 0 24 V DC
5.5 V 5 V DC
19...30 V 24 V DC
Current state 0 guaranteed <= 1 mA 5 V DC
<= 2 mA 24 V DC
Current state 1 guaranteed >= 6 mA 24 V DC
>= 3.7 mA 5 V DC

Complementary

Characteristic Value(s)
Response time 1.5 ms event processing
8 ms master task
Sensor power supply 2.5 V
Current consumption 15 mA
Logic input Positive
Input impedance 0.27 Ohm at 5 V DC at Un
1.4 Ohm at 24 V DC at Un
>= 0.44 Ohm at 5 V DC at U = 2.4 V
Response time 3 ms
Input type Resistive 24 V DC
Input compatibility 2-wire/3-wire proximity sensor 24 V DC
Product weight 0.22 kg
TSXAEY420C Schneider Electric
Schneider TSXAEY420C Schneider Electric
$0.00
Sold Out

analog input module - 4 high level input - current, voltage - 16 bits
TSXCTY2AC Schneider Electric
Schneider TSXCTY2AC Schneider Electric
$0.00
Sold Out

Main

Characteristic Value(s)
Range of Product Modicon Premium Automation platform
Product or Component Type Counter modules
I/O modularity 2 channels
Electrical circuit type Auxiliary output

Complementary

Characteristic Value(s)
Counting frequency 40000 Hz
Power dissipation in W 4.5…6 W
Cycle time 5 ms
Discrete input logic Current sink auxiliary input (preset, enable and read) IEC 1131 Type 2
Resistive 2/3-wire proximity sensors PNP/NPN IEC 1131 Type 2
Resistive encoder input
Input logic Positive
Input compatibility Incremental encoder 10...30 V totem pole
Incremental encoder 5 V DC RS422
Input voltage 24 V 18 mA 2/3-wire proximity sensors PNP/NPN
24 V 7 mA auxiliary input (preset, enable and read)
5 V 18 mA encoder input
Input voltage limits <= 5.5 V encoder input
19...30 V 2/3-wire proximity sensors PNP/NPN
19...30 V auxiliary input (preset, enable and read)
Voltage state 1 guaranteed >= 11 V 2/3-wire proximity sensors PNP/NPN
>= 11 V auxiliary input (preset, enable and read)
>= 2.4 V encoder input
Current state 1 guaranteed >= 3.7 mA encoder input)
>= 6 mA 2/3-wire proximity sensors PNP/NPN)
>= 6 mA auxiliary input (preset, enable and read))
Voltage state 0 guaranteed <= 1.2 V encoder input
<= 5 V 2/3-wire proximity sensors PNP/NPN
<= 5 V auxiliary input (preset, enable and read)
Current state 0 guaranteed <= 1 mA encoder input)
<= 2 mA 2/3-wire proximity sensors PNP/NPN)
<= 2 mA auxiliary input (preset, enable and read))
Response time < 2.5 ms sensor voltage at loss of 24 V auxiliary input (preset, enable and read)
Input impedance Encoder input > 270 Ohm at U = 2.4 V
2/3-wire proximity sensors PNP/NPN 1400 Ohm at Un
Auxiliary input (preset, enable and read) 3400 Ohm at Un
Encoder input 400 Ohm at Un
Output voltage 24 V DC
nominal output current 0.5 A
Output voltage limits 19...30 V
Maximum voltage drop <0.5 V at state 1
Output compatibility Positive logic DC inputs (resistance <= 15 kOhm) auxiliary output
Maximum leakage current 0.1 mA
Switching time < 0.25 ms
Switching frequency < 0.6/LI² Hz on inductive load
Output overload protection Thermal tripping via program or automatically
Current limiter
Output short-circuit protection Thermal tripping via program or automatically
Current limiter
Output overvoltage protection Zener diode
Reverse polarity protection Reverse diode on supply
Checks Sensor power supply
Current consumption 280 mA 5 V DC
30 mA 24 V DC
Module format Standard
Local signalling 1 LED (green) for module operating (RUN)
1 LED (red) for external fault (I/O)
1 LED (red) for internal fault, module failure (ERR)
2 LEDs (green) for axis diagnostics available (CH.)
Electrical connection 1 connector HE-10, 20 pins
2 connectors SUB-D 15
Product Weight 0.71 lb(US) (0.32 kg)
TM5SPDG12F Schneider
Schneider TM5SPDG12F Schneider
$0.00
Sold Out

common distribution module - 12 x 24 V DC
TSXASY800C Schneider Electric
Schneider TSXASY800C Schneider Electric
$0.00
Sold Out

Main

Characteristic Value(s)
Range of Product Modicon Premium Automation platform
Product or Component Type Analog output module
Analogue output number 8
Analogue output type Current 0...20 mA
Current 4...20 mA
Voltage +/- 10 V
Analog/digital conversion 13 bits + sign +/- 10 V
13 bits 0...20 mA
13 bits 4...20 mA

Complementary

Characteristic Value(s)
Conversion time 5 ms
Measurement resolution 1.28 mV +/- 10 V
2.56 µA 0...20 mA
2.56 µA 4...20 mA
Electrical Connection 1 SUB-D 25 connector
Measurement error 0.14 % of full scale +/- 10 V 25 °C
0.21 % of full scale 0...20 mA 25 °C
0.21 % of full scale 4...20 mA 25 °C
0.28 % of full scale +/- 10 V 0...60 °C
0.52 % of full scale 0...20 mA 0...60 °C
0.52 % of full scale 4...20 mA 0...60 °C
Isolation between channels Common point
Isolation between channels and bus 1000 Vrms
Isolation between channels and ground 1000 Vrms
Protection Type Overload protection
Short-circuit protection
Output voltage limits <= 30 V
Load impedance ohmic < 600 Ohm 0...20 mA
< 600 Ohm 4...20 mA
> 1000 Ohm +/- 10 V
Maximum load inductance 0.3 mH
Maximum load capacitance 0.1 µF
Marking CE
Current consumption 200 mA 5 V DC
300 mA 24 V DC
Module format Standard
Terminals description PLC n°1 (20)OUT_ANA_COM#4
PW_POS#
(6)OUT_ANA_COM#3
(16)OUT_ANA_CUR#1
(13)IN_ANA_STD#
(2)OUT_ANA_CUR#0
(9)OUT_ANA_COM#5
(25)OUT_ANA_CUR#7
(4)OUT_ANA_VOLT#2
(21)OUT_ANA_VOLT#5
(1)OUT_ANA_VOLT#0
(11)OUT_ANA_CUR#6
(3)OUT_ANA_COM#1
(22)OUT_ANA_CUR#5
(8)OUT_ANA_CUR#4
(10)OUT_ANA_VOLT#6
(15)OUT_ANA_VOLT#1
(12)OUT_ANA_COM#7
(19)OUT_ANA_CUR#3
(17)OUT_ANA_COM#2
(14)OUT_ANA_COM#0
(24)OUT_ANA_VOLT#7
PW_NEG#
(5)OUT_ANA_CUR#2
(7)OUT_ANA_VOLT#4
(23)OUT_ANA_COM#6
(18)OUT_ANA_VOLT#3
TM7SDI8DFS Schneider
Schneider TM7SDI8DFS Schneider
$0.00
Sold Out

Main

Characteristic Value(s)
Range of Product Modicon TM7
Product or Component Type Safety discrete I/O expansion block
Range Compatibility Modicon LMC058
Modicon M258
Enclosure Material Plastic
Bus type TM7 bus
[Ue] rated operational voltage 24 V DC
Input/output number 8
input/output number of block 8 I

Complementary

Characteristic Value(s)
Discrete input number 0…8 configurable by software
Discrete input voltage 24 V
Discrete input voltage type DC
Discrete input current 6 mA
Discrete input logic Positive logic (sink)
Discrete output number 0 <= 2 A configurable by software)
8 clock push-pull <= 80 mA short-circuit and thermal limit
Discrete output voltage 24 V
Discrete output voltage type DC
Electrical connection 1 male connector M12 - B coding - 4 ways bus IN
1 female connector M12 - B coding - 4 ways bus OUT
1 male connector M8 - 4 ways power IN
1 female connector M8 - 4 ways power OUT
2 female connectors M12 - A coding - 5 ways digital I/O
2 female connectors M12 - A coding - 8 ways digital I/O
Local signalling for power supply status 2 LEDs
for safety status 2 LEDs
for input/output status 12 LEDs
Operating position Any position
Fixing Mode By 2 screws
Product Weight 0.437 lb(US) (0.198 kg)
Safety level SIL 3 IEC 61508
SIL 3 IEC 62061
PL = e EN 13849-1
Safety reliability data PFD < 1E-5
MTTFd = 2500 years
PFH < 1E-10
TSXCFY11C Schneider Electric
Schneider TSXCFY11C Schneider Electric
$0.00
Sold Out

Main

Characteristic Value(s)
Range of Product Modicon Premium Automation platform
Product or Component Type Motion control module
Product Specific Application For stepper motors
Software Designation Unity Pro

Complementary

Characteristic Value(s)
I/O modularity 1 axis
Maximum pulse frequency 187 kHz
Power dissipation in W 3.8 W
Input type Current sink auxiliary input EN/IEC 61131 type 2
Resistive amplifier input
Discrete input logic Negative amplifier input
Positive auxiliary input
Input voltage 24 V 7 mA auxiliary input
5 V 4.5 mA amplifier input
Input voltage limits 19...30 V auxiliary input
Voltage state 1 guaranteed < 2 V amplifier input
>= 11 V auxiliary input
Current state 1 guaranteed >= 6 mA auxiliary input)
Voltage state 0 guaranteed <= 5 V auxiliary input
> 3.6 V amplifier input
Current state 0 guaranteed <= 2 mA auxiliary input)
Input impedance 3400 Ohm auxiliary input
Input immunity < 250 µs auxiliary input for homing cam and event inputs
15...30 µs amplifier input for loss of step input
3000...10000 µs auxiliary input for limit switch, emergency stop and external stop inputs
3000...16000 µs amplifier input for amplifier fault input
Power supply monitoring 0…14 V auxiliary input at fault state
18…24 V auxiliary input at OK state
Maximum detection time < 30 ms auxiliary input from fault to OK state
> 1 ms auxiliary input from OK to fault state
Input compatibility With 2-wire/3-wire sensor auxiliary input
Output type Open collector PNP brake output EN/IEC 61131-2
RS422, TTL 5 V open collector NPN compatible amplifier output
Output differential voltage +/- 2 V <= 100 Ohm amplifier output
Maximum output short-circuit current 150 mA amplifier output
Permissible common mode voltage 7 V amplifier output
Maximum permissible differential voltage 12 V amplifier output
Output voltage 24 V DC 19...30 V brake output
Nominal output current 0.5 A <0.3 mA 0.625 A brake output
Maximum voltage drop <1 V at state on brake output
Switching time < 0.25 ms brake output
Output compatibility Positive logic DC inputs (resistance <= 15 kOhm) brake output
Short-circuit protection Thermal tripping via program or automatically brake output
Output overload protection Current limiter brake output
Output overvoltage protection Zener diode brake output
Reverse polarity protection Brake output reverse mounted diode on supply
Speed profile path Trapezoidal
Operating Mode Direct drive mode
AUTO
OFF
Manually
Checks Amplifier, limits switches, emergency stop
Consistency of commands
Correct execution by software position limits, loss of step
Sensor power supply
Validity of parameters
Short circuit (one signalling bit per channel)
Optional commands Boost
Brake
Local signalling 1 LED (green) for module operating (RUN)
1 LED (red) for external fault (I/O)
1 LED (red) for internal fault, module failure (ERR)
2 LEDs (green) for axis diagnostics available (CH.)
Electrical connection 1 connector HE-10, 20 pins
1 connector SUB-D 15
Current consumption 510 mA 5 V DC
50 mA DC
Module format Standard
Product Weight 0.97 lb(US) (0.44 kg)
Protective treatment Conformal coating Humiseal 1A33
TSXCTY4AC Schneider Electric
Schneider TSXCTY4AC Schneider Electric
$0.00
Sold Out

Main

Characteristic Value(s)
Range of Product Modicon Premium Automation platform
Product or Component Type Counter modules
I/O modularity 4 channels
Electrical circuit type Auxiliary output

Complementary

Characteristic Value(s)
Counting frequency 40000 Hz
Power dissipation in W 8…11.5 W
Cycle time 10 ms
Discrete input logic Current sink auxiliary input (preset, enable and read) IEC 1131 Type 2
Resistive 2/3-wire proximity sensors PNP/NPN IEC 1131 Type 2
Resistive encoder input
Input logic Positive
Input compatibility Incremental encoder 10...30 V totem pole
Incremental encoder 5 V DC RS422
Input voltage 24 V 18 mA 2/3-wire proximity sensors PNP/NPN
24 V 7 mA auxiliary input (preset, enable and read)
5 V 18 mA encoder input
Input voltage limits <= 5.5 V encoder input
19...30 V 2/3-wire proximity sensors PNP/NPN
19...30 V auxiliary input (preset, enable and read)
Voltage state 1 guaranteed >= 11 V 2/3-wire proximity sensors PNP/NPN
>= 11 V auxiliary input (preset, enable and read)
>= 2.4 V encoder input
Current state 1 guaranteed >= 3.7 mA encoder input)
>= 6 mA 2/3-wire proximity sensors PNP/NPN)
>= 6 mA auxiliary input (preset, enable and read))
Voltage state 0 guaranteed <= 1.2 V encoder input
<= 5 V 2/3-wire proximity sensors PNP/NPN
<= 5 V auxiliary input (preset, enable and read)
Current state 0 guaranteed <= 1 mA encoder input)
<= 2 mA 2/3-wire proximity sensors PNP/NPN)
<= 2 mA auxiliary input (preset, enable and read))
Response time < 2.5 ms sensor voltage at loss of 24 V auxiliary input (preset, enable and read)
Input impedance Encoder input > 270 Ohm at U = 2.4 V
2/3-wire proximity sensors PNP/NPN 1400 Ohm at Un
Auxiliary input (preset, enable and read) 3400 Ohm at Un
Encoder input 400 Ohm at Un
Output voltage 24 V DC
nominal output current 0.5 A
Output voltage limits 19...30 V
Maximum voltage drop <0.5 V at state 1
Output compatibility Positive logic DC inputs (resistance <= 15 kOhm) auxiliary output
Maximum leakage current 0.1 mA
Switching time < 0.25 ms
Switching frequency < 0.6/LI² Hz on inductive load
Output overload protection Thermal tripping via program or automatically
Current limiter
Output short-circuit protection Thermal tripping via program or automatically
Current limiter
Output overvoltage protection Zener diode
Reverse polarity protection Reverse diode on supply
Checks Sensor power supply
Current consumption 330 µA 5 V DC
36 mA 24 V DC
Module format Standard
Local signalling 1 LED (green) for module operating (RUN)
1 LED (red) for external fault (I/O)
1 LED (red) for internal fault, module failure (ERR)
4 LEDs (green) for axis diagnostics available (CH.)
Electrical connection 2 connectors HE-10, 20 pins
4 connectors SUB-D 15
Product Weight 0.95 lb(US) (0.43 kg)

Recently viewed