Measurement Sensors

Filters

In stock (386)
Out of stock (658)

Showing 457 - 480 of 719 products

$860.66

In stock, 12 units

Specifications

Model		GT2-PA12KL
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.1 µm 0.004 Mil
Indicated accuracy		1 µm0.04 Mil(P-P)^*1
Measuring force	Downward mounting	0.4 N^*2
	Side mounting	0.35 N^*2
	Upward mounting	0.3 N^*2
Sampling cycle		4 ms
Fluid used		Clean dry air
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	-
	Pressure resistance	0.5 MPa
	Applied pressure range	0.05 MPa to 0.07 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT
	Contact	SUS304, cemented tungsten carbide^*3
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 35 g (not including cable)^*4
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot. This is a representative value when using the GT2-PA12KL/PA12L with a pressure of 0.06 MPa. The measuring force varies depending on the air pressure used. For details, see table 1.No dust boots are used with the GT2-PA12KL/PA12L. ^3 Contacts are available as options sold separately. ^4 Including the relay connector.

Keyence GT2-PA12K Keyence

$1,053.66

In stock, 18 units

Specifications

Model		GT2-PA12K
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.1 µm 0.004 Mil
Indicated accuracy		1 µm 0.04 Mil (p-p)^*1
Measuring force	Downward mounting	1.2 N^*2
	Side mounting	1.15 N^*2
	Upward mounting	1.1 N^*2
Sampling cycle		4 ms
Fluid used		Clean dry air
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67 (IEC)
	Pressure resistance	0.5 MPa
	Applied pressure range	0.24 to 0.26 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT, Spindl: SUS430 (Fluorine coating)
	Contact	SUS304, cemented tungsten carbide^*3
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 35 g (excluding cable)^*4
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 This is a representative value at the center of the measuring range when using GT2 with a pressure of 0.25 MPa. The measuring force varies depending on the air pressure used. For details, please refer to the catalog or the user manual. ^3 The contact is included with the sensor. ^4 Including the relay connector.

Keyence GT2-PA12 Keyence

$1,005.41

In stock, 17 units

Specifications

Model		GT2-PA12
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.5 µm 0.02 Mil
Indicated accuracy		2 µm 0.08 Mil (p-p)^*1
Measuring force	Downward mounting	1.2 N^*2
	Side mounting	1.15 N^*2
	Upward mounting	1.1 N^*2
Sampling cycle		4 ms
Fluid used		Clean dry air
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67 (IEC)
	Pressure resistance	0.5 MPa
	Applied pressure range	0.24 to 0.26 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT, Spindl: SUS430 (Fluorine coating)
	Contact	TYPE304, 440C Stainless steel^*3
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 35 g (excluding cable)^*4
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 This is a representative value at the center of the measuring range when using GT2 with a pressure of 0.25 MPa. The measuring force varies depending on the air pressure used. For details, please refer to the catalog or the user manual. ^3 The contact is included with the sensor. ^4 Including the relay connector.

Keyence GT2-P12L Keyence

$1,228.44

In stock, 13 units

Specifications

Model		GT2-P12L^*1
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.5 μm 0.02 Mil
Indicated accuracy		2 µm 0.08 Mil (p-p)^*2
Measuring force	Downward mounting	0.2 N^*3
	Side mounting	0.15 N^*3
	Upward mounting	0.1 N^*3
Sampling cycle		4 ms
Mechanical response		4 Hz^*2
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	-
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT
	Dust boot	-
	Contact	SUS304, SUS440C^*4
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 35 g (excluding cable)^*5
^1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased. For details, contact your local sales office. ^2 Value when the ambient temperature is 20 °C 68 °F. ^3 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^4 The contact is included with the sensor. ^*5 Including the relay connector.

Keyence GT2-P12KL Keyence

$788.28

In stock, 12 units

Specifications

Model		GT2-P12KL^*1
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.1 μm 0.004 Mil
Indicated accuracy		1 µm 0.04 Mil (p-p)^*2
Measuring force	Downward mounting	0.2 N^*3
	Side mounting	0.15 N^*3
	Upward mounting	0.1 N^*3
Sampling cycle		4 ms
Mechanical response		4 Hz^*2
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	-
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT
	Dust boot	-
	Contact	SUS304, cemented tungsten carbide^*4
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 35 g (excluding cable)^*5
^1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased. For details, contact your local sales office. ^2 Value when the ambient temperature is 20 °C 68 °F. ^3 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^4 The contact is included with the sensor. ^*5 Including the relay connector.

Keyence GT2-P12KF Keyence

$1,101.92

In stock, 14 units

Specifications

Model		GT2-P12KF^*1
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.1 μm 0.004 Mil
Indicated accuracy		1 µm 0.04 Mil (p-p)^*2
Measuring force	Downward mounting	1.0 N^*3
	Side mounting	0.95 N^*3
	Upward mounting	0.9 N^*3
Sampling cycle		4 ms
Mechanical response		10 Hz^*2
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67G (JIS)^4, IP67 (IEC), NEMA Type 13^4
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT
	Dust boot	NBR
	Contact	SUS304, cemented tungsten carbide^*5
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 45 g (excluding cable)^*6
^1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased. For details, contact your local sales office. ^2 Value when the ambient temperature is 20 °C 68 °F. ^3 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^4 When an M8 oil-resistant cable (GT2-CHP2M/CHP5M/CHP10M) is used for the sensor head cable. ^5 The contact is included with the sensor. ^6 Including the relay connector.

Keyence GT2-P12F Keyence

$1,077.78

In stock, 14 units

Specifications

Model		GT2-P12F^*1
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.5 μm 0.02 Mil
Indicated accuracy		2 µm 0.08 Mil (p-p)^*2
Measuring force	Downward mounting	1.0 N^*3
	Side mounting	0.95 N^*3
	Upward mounting	0.9 N^*3
Sampling cycle		4 ms
Mechanical response		10 Hz^*2
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67G (JIS)^4, IP67 (IEC), NEMA Type 13^4
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT
	Dust boot	NBR
	Contact	SUS304, SUS440C^*5
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 45 g (excluding cable)^*6
^1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased. For details, contact your local sales office. ^2 Value when the ambient temperature is 20 °C 68 °F. ^3 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^4 When an M8 oil-resistant cable (GT2-CHP2M/CHP5M/CHP10M) is used for the sensor head cable. ^5 The contact is included with the sensor. ^6 Including the relay connector.

Keyence GT2-P12 Keyence

$740.03

In stock, 17 units

Specifications

Model		GT2-P12^*1
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm 0.47"
Resolution		0.5 μm 0.02 Mil
Indicated accuracy		2 µm 0.08 Mil (p-p)^*2
Measuring force	Downward mounting	1.0 N^*3
	Side mounting	0.95 N^*3
	Upward mounting	0.9 N^*3
Sampling cycle		4 ms
Mechanical response		10 Hz^*2
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67G (JIS)^4, IP67 (IEC), NEMA Type 13^4
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT
	Dust boot	NBR
	Contact	SUS304, SUS440C^*5
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 35 g (excluding cable)^*6
^1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased. For details, contact your local sales office. ^2 Value when the ambient temperature is 20 °C 68 °F. ^3 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^4 When an M8 oil-resistant cable (GT2-CHP2M/CHP5M/CHP10M) is used for the sensor head cable. ^5 The contact is included with the sensor. ^6 Including the relay connector.

Keyence OP-038 (OP-0038) Keyence

$0.00

Sold Out

Specifications

Model				OP-038
Overview				This is an interference-prevention adapter (C-1000) for preventing mutual interference. Use this product when you want to suppress mutual interference to enable multiple sensor heads to be installed in close proximity to each other.
Applicable product				ES-11AC, ES-21AC, TA-340

Keyence OP-037 (OP-0037) Keyence

$0.00

Sold Out

Specifications

Model				OP-037
Overview				This is an interference-prevention adapter (C-500) for preventing mutual interference. Use this product when you want to suppress mutual interference to enable multiple sensor heads to be installed in close proximity to each other.
Applicable product				ES-11AC, ES-21AC, TA-340

Keyence OP-42100 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SH-822 Keyence

$2,957.35

Only 6 units left

Specifications

Model		SH-822^*1
Type		Heat-resistant^*2 Non-shielded Cylindrical & Threaded
Shape		ø22×35 Cylindrical ＋ Threaded
Detectable object		Ferrous metal (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		30 x 30 mm 1.18" x 1.18"^*3
Stable detecting range		2 to 8 mm 0.08" to 0.31"
Maximum detecting distance		―
Repeatability		0.008 mm 0.0003"^*3
Hysteresis		0.04 mm 0.002"^*3
Temperature characteristics		0.2%/°C^*3
Environmental resistance	Enclosure rating	Heat-resistant
	Ambient temperature	-10 to +200 °C 14 to 392 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 170 g
^1 The EG-547(W) cannot be used in combination with SH-422, 430, 440, 290, 809, 816 and 822. ^2 Precautions when using heat-resistant sensor head： Use the sensor within the stable detecting range. The heat-resistant sensor head is not waterproof; do not use this sensor head in a location directly exposed to liquid or steam. ^*3 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.

Keyence SH-816 Keyence

$648.42

Only 5 units left

Specifications

Model		SH-816^*1
Type		Heat-resistant^*2 Shielded Threaded
Shape		M16×20 Threaded
Detectable object		Ferrous metal (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		20 x 20 mm 0.79" x 0.79"^*3
Stable detecting range		1 to 4 mm 0.04" to 0.16"
Maximum detecting distance		―
Repeatability		0.005 mm 0.0002"^*3
Hysteresis		0.04 mm 0.002"^*3
Temperature characteristics		0.2%/°C^*3
Environmental resistance	Enclosure rating	Heat-resistant
	Ambient temperature	-10 to +200 °C 14 to 392 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 83 g
^1 The EG-547(W) cannot be used in combination with SH-422, 430, 440, 290, 809, 816 and 822. ^2 Precautions when using heat-resistant sensor head： Use the sensor within the stable detecting range. The heat-resistant sensor head is not waterproof; do not use this sensor head in a location directly exposed to liquid or steam. ^*3 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.

Keyence SH-809 Keyence

$476.60

Only 2 units left

Specifications

Model		SH-809^*1
Type		Heat-resistant^*2 Shielded Cylindrical
Shape		ø9.4×18 Cylindrical
Detectable object		Ferrous metal (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		15 x 15 mm 0.59" x 0.59"^*3
Stable detecting range		0.5 to 2 mm 0.02" to 0.08"
Maximum detecting distance		―
Repeatability		0.002 mm 0.00008"^*3
Hysteresis		0.04 mm 0.002"^*3
Temperature characteristics		0.2%/°C^*3
Environmental resistance	Enclosure rating	Heat-resistant
	Ambient temperature	-10 to +200 °C 14 to 392 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 55 g
^1 The EG-547(W) cannot be used in combination with SH-422, 430, 440, 290, 809, 816 and 822. ^2 Precautions when using heat-resistant sensor head： Use the sensor within the stable detecting range. The heat-resistant sensor head is not waterproof; do not use this sensor head in a location directly exposed to liquid or steam. ^*3 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.

Keyence SH-614A Keyence

$955.41

Only 4 units left

Specifications

Model		SH-614A
Type		Standard Shielded Thin
Shape		14×30×4.8 Thin
Detectable object		Ferrous metal (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		15 x 15 mm 0.59" x 0.59"^*1
Stable detecting range		0 to 5 mm 0.20"
Maximum detecting distance		10 mm 0.39"
Repeatability		0.002 mm 0.00008"^*1
Hysteresis		0.015 mm 0.0006"^*1
Temperature characteristics		0.04%/°C^*1
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 60 g
^*1 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.

Keyence SH-440 Keyence

$0.00

Sold Out

Specifications

Model		SH-440^*1
Type		Standard Non-shielded Cylindrical & Threaded
Shape		ø40×55 Cylindrical ＋ Threaded
Detectable object		Ferrous metal (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		40 x 40 mm 1.57"^*2
Stable detecting range		0 to 18 mm 0.71"
Maximum detecting distance		40 mm 1.57"
Repeatability		0.015 mm 0.0006"^*2
Hysteresis		0.05 mm 0.0002"^*2
Temperature characteristics		0.08%/°C^*2
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 280 g
^1 The EG-547(W) cannot be used in combination with SH-422, 430, 440, 290, 809, 816 and 822. ^2 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.

Keyence SH-430 Keyence

$0.00

Sold Out

Specifications

Model		SH-430^*1
Type		Standard Non-shielded Cylindrical & Threaded
Shape		ø30×45 Cylindrical ＋ Threaded
Detectable object		Ferrous metal (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		30 x 30 mm 1.18" x 1.18"^*2
Stable detecting range		0 to 12 mm 0.47"
Maximum detecting distance		30 mm 1.18"
Repeatability		0.01 mm 0.0004"^*2
Hysteresis		0.03 mm 0.001"^*2
Temperature characteristics		0.08%/°C^*2
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 225 g
^1 The EG-547(W) cannot be used in combination with SH-422, 430, 440, 290, 809, 816 and 822. ^2 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.

Keyence SH-422 Keyence

$341.19

Only 1 unit left

Specifications

Model		SH-422^*1
Type		Standard Non-shielded Cylindrical & Threaded
Shape		ø22×35 Cylindrical ＋ Threaded
Detectable object		Ferrous metal (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		25 x 25 mm 0.98" x 0.98"^*2
Stable detecting range		0 to 9 mm 0.35"
Maximum detecting distance		22 mm 0.87"
Repeatability		0.008 mm 0.0003"^*2
Hysteresis		0.02 mm 0.0008"^*2
Temperature characteristics		0.08%/°C^*2
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 195 g
^1 The EG-547(W) cannot be used in combination with SH-422, 430, 440, 290, 809, 816 and 822. ^2 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.

Keyence SH-416 Keyence

$0.00

Sold Out

Specifications

Model		SH-416
Type		Standard Non-shielded Cylindrical & Threaded
Shape		ø14.5×20 Cylindrical ＋ Threaded
Detectable object		Ferrous metal (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		20 x 20 mm 0.79" x 0.79"^*1
Stable detecting range		0 to 6 mm 0.24"
Maximum detecting distance		15 mm 0.59"
Repeatability		0.005 mm 0.0002"^*1
Hysteresis		0.015 mm 0.0006"^*1
Temperature characteristics		0.08%/°C^*1
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 73 g
^*1 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.

Keyence SH-308 Keyence

$460.59

Only 3 units left

Specifications

Model		SH-308
Type		Standard Shielded Cylindrical
Shape		ø8×18 Cylindrical
Detectable object		Ferrous metal (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		10 x 10 mm 0.39" x 0.39"^*1
Stable detecting range		0 to 2 mm 0.08"
Maximum detecting distance		5 mm 0.20"
Repeatability		0.002 mm 0.00008"^*1
Hysteresis		0.01 mm 0.0004"^*1
Temperature characteristics		0.08%/°C^*1
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 55 g
^*1 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.

Keyence SH-305 Keyence

$428.09

Only 3 units left

Specifications

Model		SH-305
Type		Standard Shielded Cylindrical
Shape		ø5.4×18 Cylindrical
Detectable object		Ferrous metal (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		5 x 5 mm 0.20"^*1
Stable detecting range		0 to 1 mm 0.04"
Maximum detecting distance		3 mm 0.12"
Repeatability		0.001 mm 0.00004"^*1
Hysteresis		0.01 mm 0.0004"^*1
Temperature characteristics		0.08%/°C^*1
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 45 g
^*1 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.

Keyence SH-303A Keyence

$724.34

Only 3 units left

Specifications

Model		SH-303A
Type		Standard Shielded Cylindrical
Shape		ø3.8×18 Cylindrical
Detectable object		Ferrous metal (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		5 x 5 mm 0.20"^*1
Stable detecting range		0 to 0.8 mm 0.03"
Maximum detecting distance		2 mm 0.08"
Repeatability		0.001 mm 0.00004"^*1
Hysteresis		0.05 mm 0.002"^*1
Temperature characteristics		0.3%/°C^*1
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 35 g
^*1 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.

Keyence SH-302 Keyence

$546.59

Only 2 units left

Specifications

Model		SH-302^*1
Type		Standard Shielded Cylindrical
Shape		ø2.8×12 Cylindrical
Detectable object		Ferrous metal (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		5 x 5 mm 0.20"^*2
Stable detecting range		0 to 0.6 mm 0.02"
Maximum detecting distance		1.6 mm 0.06"
Repeatability		0.001 mm 0.00004"^*2
Hysteresis		0.03 mm 0.001"^*2
Temperature characteristics		0.3%/°C^*2
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 30 g
^1 The SH-302 cannot be used in combination with the EG-547. ^2 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.

Keyence SH-290 Keyence

$0.00

Sold Out

Specifications

Model		SH-290^*1
Type		Standard Non-shielded Cylindrical
Shape		ø90×30 Cylindrical
Detectable object		Ferrous metal (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		150 x 150 mm 5.91" x 5.91"^*2
Stable detecting range		0 to 35 mm 1.38"
Maximum detecting distance		70 mm 2.76"
Repeatability		0.03 mm 0.001"^*2
Hysteresis		0.1 mm 0.004"^*2
Temperature characteristics		0.08%/°C^*2
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 650 g
^1 The EG-547(W) cannot be used in combination with SH-422, 430, 440, 290, 809, 816 and 822. ^2 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.

Previous Page 20 / 30Next

Filters

In stock (386)
Out of stock (658)