Measurement Sensors

Filters

In stock (381)
Out of stock (662)

Showing 25 - 48 of 719 products

$479.46

In stock, 11 units

Specifications

Model		GT2-71CP
Mounting method		DIN-rail mount
Output		PNP output
Main unit/expansion unit		Main unit
Power supply voltage		10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal	2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)	1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	PNP open collector, 30 V 50 mA or less, residual voltage 1 V or less^1^2
Analog output		-
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight		Approx. 70 g
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence GT2-100P Keyence

$908.91

In stock, 13 units

Specifications

Model		GT2-100P
Mounting method		Panel mount/Screw mounting using optional mounting bracket
Output		PNP output
Main unit/expansion unit		-
Power supply voltage		20 to 30 VDC, including 10 % ripple (P-P), Class 2
Power consumption	Normal	4,500 mW max. (30 V, 150 mA max.)
	Power saving (Eco)	3,600 mW max. (30 V, 120 mA max.)^*1
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
	Other displays	2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range		-199.999.9 to 199.999.9
Display resolution		0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	PNP open collector, 30 V 50 mA or less^*2, residual voltage 1 V or less
Response time		hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 0.15 mm 0.006", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET
Power supply/I/O cable		Power supply: Terminal block, I/O: 20-pin connector (MIL standard)
Weight		Approx. 380 g
^1 For GT2-100 Series, when the maximum number of sensor heads are connected and all units are set to power saving mode. ^2 When 2 or more sensor heads are connected, 20 mA or less.

Keyence GT2-A32 Keyence

$884.78

In stock, 19 units

Specifications

Model		GT2-A32
Detection system		Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range		32 mm 1.26"
Resolution		0.5 μm 0.02 Mil
Indicated accuracy		3 µm 0.12 Mil (p-p)^*1
Measuring force	Downward mounting	2.1 N^*2
	Side mounting	1.8 N^*2
	Upward mounting	1.5 N^*2
Sampling cycle		1 ms
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67^*3
	Pressure resistance	1 MPa
	Applied pressure range	0.25 to 0.5 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions^*4
Materials	Main body	Main body case: Zinc die-casting; Cylinder part: Aluminium alloy; Air joint resin part: Polyacetal; Air joint metal part: Brass nickel plating; Indicator: Polyarylate
	Dust boot	NBR
	Contact	TYPE304, 440C Stainless steel^*5
Sensor head cable		Optional (connect to the M8 connector)
Weight		Approx. 340 g (excluding cable)
^1 Value when the ambient temperature is 20 °C 68 °F. ^2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots. ^3 Make sure the air tube is connected to the air exhaust joint and that no foreign materials enter inside from the joint. ^4 In the case where a mounting bracket D is used with GT2-A32 and GT2-A50, the double amplitude becomes 0.75 mm 0.03". ^*5 The contact is included with the sensor.

Keyence GT2-S5 Keyence

$1,135.15

In stock, 16 units

Specifications

Model		GT2-S5^*1
Detection system		Differential transformer
Measuring range		5 mm 0.20"^*2
Operating range		7 mm 0.28"^*2
Resolution		0.1 µm
Indicated accuracy		1 µm (P-P)^3^4
Measuring force	Downward mounting	1.0 N^*5
	Side mounting	0.95 N^*5
	Upward mounting	0.9 N^*5
Sampling cycle		1 ms
Mechanical response		20 Hz^*4
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	IP67G (JIS)^*6, IP67 (IEC)
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	10 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS430F, Sensor head-relay connector cable: PUR, Relay amplifier: PPSU
	Dust boot	NBR
	Contact	SUS304, cemented tungsten carbide^*7
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 40 g (not including cable)^*8
^1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased. For details, contact your local sales office. ^2 The measuring range represents the range at which measured values can be displayed. The operating range is the actual movable range of the spindle. ^3 Within ±0.3 mm 0.012" from the center of the measuring range, the width for any 0.2 mm 0.008" is 1 µm. The entire area is 2 µm. The linearity for the entire measuring range is ±0.15 % of F.S. (F.S.: 5 mm 0.20") ^4 Value when the ambient temperature is 20 °C 68 °F. ^5 Representative value at the center of the measuring range. Please note that the measuring force varies depending on the installation orientation of the dust boot. ^6 When an M8 oil-resistant cable (GT2-CHP2M/CHP5M/CHP10M) is used for the sensor head cable. ^7 Contacts are available as options sold separately. ^8 Including the relay connector.

Keyence EX-110V Keyence

$228.35

In stock, 44 units

Specifications

Model		EX-110V^*1
Type		Sensor head
Amplifier unit		NPN: EX-V02 PNP: EX-V02P
Shape		M10 x 18 mm 0.71" Threaded
Measuring range		0 to 2 mm 0 to 0.08"
Display range		-19,999 to +19,999
Linearity		±0.3% of F.S.
Resolution (No. of averaging measurements: 64)		0.4 μm
Sampling rate		40,000 samplings max./sec. ^*2
Display speed		20 times/sec.
Display power		7-segment 2-color LED
Over-range alarm		±FFFF is displayed.
Control input		NPN open-collector or non-voltage contact (Timing input, Reset input, Auto-zero input, Comparator output disable input, Synchronous input, External setting input)/PNP: Applied voltage; 10 to 30 V
Control output	Setting method	Upper/lower 2-level setting x 4 patterns (selectable)
	Signal	NPN open-collector (HIGH, GO and LOW): 100 mA max. (40 V max.) PNP open-collector (HIGH, GO and LOW): 100 mA max. (30 V max.)
	Response time	0.075 ms (at maximum speed)
	OFF-delay time	60 ms
Strobe output		NPN: 100 mA max. (40 V max.)/PNP: 100 mA max. (30 V max.), Residual voltage: 1 V max. (N.O.)
Alarm output		NPN: 100 mA max. (40 V max.)/PNP: 100 mA max. (30 V max.), Residual voltage: 1 V max. (N.C.)
Analog output voltage	Output voltage	±5V
	Impedance	100 Ω
	Response time	0.075 ms (at maximum speed)
Temperature characteristics		0.07% of F.S./°C ^*3
Major functions		FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc.
Rating	Power voltage	24 VDC ±10%, Ripple (P-P): 10% max.
	Current consumption	240 mA max.
Environmental resistance	Ambient temperature	-10 to +60 °C 14 to 140 °F, No freezing
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 55 g (including 3 m 9.8' cable)
^1 The above data was obtained using an iron target (S45C, SS400, t=1 mm 0.04"). When measuring aluminum, copper, or stainless steel targets, refer to the linear characteristics for these materials. ^2 When the digital filter function is used, the sampling rate is 20,000 sampling/sec. ^*3 When the distance between the sensor head and the target is within 50% of the measuring range.

Keyence OP-87057 Keyence

$191.84

Only 8 units left

Specifications

Model				OP-87057
Type				Sensor head cable
Applicable product				IL,IG,GV-T Series head
Cable end				M8 straight - e-con
Length				5 m 16.40'
Material				Cable: Polyvinyl chloride (PVC)
Note				The cable is common to the transmitter and receiver sides, and can be used on either of them.
Weight				Approx. 190 g

Keyence CB-B3 Keyence

$216.12

In stock, 12 units

Specifications

Model		CB-B3^*1
Type		Head cable
Cable min. bending R		22 mm 0.87"
Cable length		3 m 9.84'
Environmental resistance	Enclosure rating	IP67 (IEC60529)^*2
Material		PVC
Weight		Approx. 250 g
^1 Regarding cable extension between the head and controller: Up to 2 cables can be connected with the CB-BxxE, and these cables should be kept to a total length of 30 m 98.4' or less. ^2 This value is from a case in which the sensor head has been connected. However, the controller side connector is not included.

Keyence CB-B10 Keyence

$446.94

Only 10 units left

Specifications

Model		CB-B10^*1
Type		Head cable
Cable min. bending R		22 mm 0.87"
Cable length		10 m 32.8'
Environmental resistance	Enclosure rating	IP67 (IEC60529)^*2
Material		PVC
Weight		Approx. 750 g
^1 Regarding cable extension between the head and controller: Up to 2 cables can be connected with the CB-BxxE, and these cables should be kept to a total length of 30 m 98.4' or less. ^2 This value is from a case in which the sensor head has been connected. However, the controller side connector is not included.

Keyence TM-X5006 Keyence

$0.00

Sold Out

Specifications

Model			TM-X5006
Transmitter/receiver distance			60 mm 2.36"
Measuring range	Field of view	High-accuracy measurement area	ø4 mm ø0.16"
		Measurement area	ø6 mm ø0.24"
	Depth of field	High-accuracy measurement area	2 mm 0.08"
		Measurement area	4 mm 0.16"
Exposure time			25/50/100 μs (Adjustable 3-stage)
Imaging time (Trigger interval)			Approx. 24 ms (at “Full” vertical/horizontal measurement range sizes) Approx. 3 ms (at “4/16” vertical/horizontal measurement range sizes)
Light source			InGaN green LED
Measurement position accuracy	High-accuracy measurement area		±0.2 μm ±0.000008" ^*1
	Measurement area		±0.3 μm ±0.000012" ^*1
Repeatability			±0.03 μm ±0.000001" ^*2
Pixel resolution			Approx. 3.5 μm 0.000138"
Environmental resistance	Enclosure rating		IP64 ^*3
	Ambient temperature		0 to +45°C 32 to 113°F
	Relative humidity		85% RH or less (No condensation)
Material			Aluminum
Weight			Transmitter: Approx. 160 g 5.65 oz Receiver: Approx. 480 g 16.94 oz Base: Approx. 210 g 7.41 oz
^1 Error when measuring width of KEYENCE standard object (glass calibration scale). ^2 Average value of ±2σ measuring the width of a KEYENCE standard object (glass calibration scale) 16 times in the center of the measurement area. ^*3 Excluding connectors and cable boxes.

Keyence TM-X5000 Keyence

$24,975.00

Only 4 units left

Specifications

Model		TM-X5000
Number of connectable sensor heads		2
Number of setting registrations		Up to 1000 settings (depending on SD card capacity and setting contents) for SD card 1 and SD card 2 individually. External switching is possible.
Memory cards		• SD card slot × 2 • Supports OP-87133 (512 MB), CA-SD1G (1 GB: Equipped as standard for SD1 slot), CA-SD4G (4 GB), CA-SD16G (16 GB)
Number of configurable tools		Up to 100 measurement tools and 100 element tools per head ^*1
Interface	Control inputs	20 (Terminal block: 5, Parallel I/O: 15)
	Control outputs	• 28 (Terminal block: 6, Parallel I/O: 22) • Photo MOSFET ^*2
	RS-232C	Numerical value output and control input/output
	PLC link	Numerical value output and control input/output using Ethernet port (Cannot be used in conjunction with EtherNet/IP™, PROFINET, and EtherCAT®) Compatible models: Mitsubishi Electric PLCs (MELSEC Q Series, L Series, iQ-R Series, iQ-F Series)
	Ethernet	• Numerical value output and control input/output • Connection to KEYENCE dedicated monitor (TM-MP120) • Connection to KEYENCE PC application software • Support for FTP client/server functions, SFTP client functions, and BOOTP functions • 1000BASE-T/100BASE-TX/10BASE-T • Support for jumbo frames (Ethernet port on main unit only)
	USB	• Connection to KEYENCE dedicated monitor (TM-MP120) • Connection to KEYENCE PC application software • USB 2.0 only
	EtherNet/IP™	• Numerical value output and control input/output using Ethernet port or optional EtherNet/IP™ unit CB-NEP20E (Cannot be used in conjunction with PLC link, PROFINET, and EtherCAT®) • Supports cyclic communication (max. 1436 bytes) and message communication • Maximum connections: 32 (Ethernet port) / 1: Exclusive Owner, 4: Input only (CB-NEP20E) • Conforms to conformance test Version CT17 (Ethernet port) / CT17 (CB-NEP20E)
	PROFINET	• Numerical value output and control input/output using Ethernet port or optional PROFINET unit CB-NPN20EA (Cannot be used in conjunction with PLC link, EtherNet/IP™, and EtherCAT®) • Supports cyclic communication (max. 1408 bytes (Ethernet port) / 1212 bytes (CB-NPN20EA)) • Supports non-cyclic communication (recorded data) • Conforms to Conformance Class A (Ethernet port) / C (CB-NPN20EA)
	EtherCAT^®	• Numerical value output and control input/output using optional EtherCAT® unit CB-NEC20E (Cannot be used in conjunction with PLC link, EtherNet/IP™, and PROFINET) • Supports cyclic communication (process data object communication) (Input: max. 530 bytes / Output: max. 534 bytes) • Supports non-cyclic communication (mailbox communication) • Supports CoE • Conforms to conformance test V2.2.1.0
	SNTP	Automatic date and time correction when connected to SNTP server
	USB HDD	Various data output, including image data, when connecting an HDD (2 TB max.) to dedicated USB port (USB 3.0 support, bus-powered, rated output: 900 mA)
	Simple monitor output	Analog RGB output, XGA (1024 × 768 (24-bit color, 60 Hz))
Minimum display unit		0.01 μm, 0.0001°, 0.0001 mm²
Display language (Simple monitor output)		Switchable between English, Japanese, Simplified Chinese, Traditional Chinese, Korean, Thai, German, French, Italian, Spanish (Mexico), Czech, Hungarian, and Polish
Ratings	Power voltage	24 VDC ±10%
	Current consumption	3.5 A
Environmental resistance	Ambient temperature	0 to +45°C 32 to 113°F (when installed on a DIN rail) / 0 to +40°C 32 to 104°F (when installed on a surface)
	Relative humidity	35 to 85% RH (No condensation)
Weight		Approx. 1600 g 3.53 lb
^1 Up to 7 master comparison tools (area/contour), 19 pitch measurement tools (distance/angle), 13 foreign particle distance tools (rotating rectangle), 8 foreign particle distance tools (circle/arc), and 7 profile extraction tools (depending on SD card capacity and settings). ^2 Positive common connection for NPN input devices and negative common connection for PNP input devices supported.

Keyence OP-87928 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87606 Keyence

$0.00

Sold Out

Specifications

Model				OP-87606
Type				Mounting brackets
Applicable product				IL-2000
Material				SUS304
Weight				Approx. 338 g

Keyence OP-87663 Keyence

$442.89

Only 1 unit left

Specifications

Model				OP-87663
Applicable product				IL Series
Number included				1 cable
Cable end				M8 L-shaped type - e-con
Length				20 m 65.62'
Note				If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit).
Weight				Approx. 680 g

Keyence OP-87662 Keyence

$375.00

Only 1 unit left

Specifications

Model				OP-87662
Applicable product				IL Series
Number included				1 cable
Cable end				M8 L-shaped type - e-con
Length				10 m 32.81'
Note				If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit).
Weight				Approx. 360 g

Keyence OP-87661 Keyence

$0.00

Sold Out

Specifications

Model				OP-87661
Applicable product				IL Series
Number included				1 cable
Cable end				M8 L-shaped type - e-con
Length				5 m 16.40'
Note				If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit).
Weight				Approx. 190 g

Keyence OP-87660 Keyence

$0.00

Sold Out

Specifications

Model				OP-87660
Applicable product				IL Series
Number included				1 cable
Cable end				M8 L-shaped type - e-con
Length				2 m 6.56'
Note				If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit).
Weight				Approx. 80 g

Keyence IL-S600 Keyence

$0.00

Sold Out

Specifications

Model		IL-S600^*1
Mounting distance		600 mm
Measurement range		200 to 1000 mm
Light source	Amplifier type	Red semiconductor laser; wavelength 655 nm (visible light)
	Laser Class	Class 2 Laser Product (FDA (CDRH) Part1040.10^*2, IEC 60825-1): 2014
	Output	560 μW
Spot diameter		Approx. 600 × 7500 μm (at the reference distance)
Linearity		±0.1% of F.S. (When used under 200 to 600 mm) ±0.3% of F.S. (When used under 200 to 1000 mm) ^3^4
Repeatability		50 μm^*5
Sampling rate		0.33/1/2/5 ms (Variable to 4 levels)
Operating indicators		Laser emission warning indicator: green LED, Analog range indicator: orange LED, Reference distance indicator: red/green LED
Temperature characteristic		0.02% of F.S./°C^*4
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp: 10000 lx^*6
	Ambient temperature	-10 to +50°C (No condensation and freezing)
	Relative humidity	35 to 85% RH (No condensation)
	Pollution degree	3
	Vibration resistance	10 to 55 Hz, 1.5 mm double amplitude, 2 hours each for X, Y, and Z axes
Material		Housing material: PBT, Metal: SUS304, Packing: NBR, Lens cover: Glass, Cable: PVC
Weight		Approx. 135 g
^1 Amplifiers purchased before August 16th, 2011 cannot be used. ^2 The classification is implemented based on IEC60825-1 following the requirement of Laser Notice of FDA (CDRH). ^3 Value when measuring the KEYENCE standard target (white diffuse object). ^4 The F.S. is as shown to the right. IL-S600: ±400 mm ^5 Is the value for when our standard object (white diffuse object) is measured at an average of 128 times and with a sampling rate of 2 ms from a standard distance ^6 Value when the sampling rate is set to 2 ms or 5 ms.

Keyence IL-S300 Keyence

$0.00

Sold Out

Specifications

Model		IL-S300^*1
Mounting distance		300 mm
Measurement range		160 to 450 mm
Light source	Amplifier type	Red semiconductor laser; wavelength 655 nm (visible light)
	Laser Class	Class 2 Laser Product (FDA (CDRH) Part1040.10^*2, IEC 60825-1): 2014
	Output	560 μW
Spot diameter		Approx. 300 × 5000 μm (at the reference distance)
Linearity		±0.05% of F.S. (When used under 160 to 300 mm) ±0.125% of F.S. (When used under 160 to 440 mm) ^3^4
Repeatability		30 μm^*5
Sampling rate		0.33/1/2/5 ms (Variable to 4 levels)
Operating indicators		Laser emission warning indicator: green LED, Analog range indicator: orange LED, Reference distance indicator: red/green LED
Temperature characteristic		0.02% of F.S./°C^*4
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp: 10000 lx^*6
	Ambient temperature	-10 to +50°C (No condensation and freezing)
	Relative humidity	35 to 85% RH (No condensation)
	Pollution degree	3
	Vibration resistance	10 to 55 Hz, 1.5 mm double amplitude, 2 hours each for X, Y, and Z axes
Material		Housing material: PBT, Metal: SUS304, Packing: NBR, Lens cover: Glass, Cable: PVC
Weight		Approx. 135 g
^1 Amplifiers purchased before August 16th, 2011 cannot be used. ^2 The classification is implemented based on IEC60825-1 following the requirement of Laser Notice of FDA (CDRH). ^3 Value when measuring the KEYENCE standard target (white diffuse object). ^4 The F.S. is as shown to the right. IL-S300: ±140 mm ^5 Is the value for when our standard object (white diffuse object) is measured at an average of 128 times and with a sampling rate of 2 ms from a standard distance. ^6 Value when the sampling rate is set to 2 ms or 5 ms.

Keyence IL-1550 Keyence

$1,774.05

Only 6 units left

Specifications

Model		IL-1550
Type		Panel mount
Main unit/Expansion unit		Expansion unit
Head compatibility		Compatible
Display	Minimum displayable unit	IL-030: 1 µm, IL-065/IL-100: 2 µm, IL-300: 10 µm, IL-600: 50 µm, IL-2000: 100 µm
	Display range	IL-030/IL-065/IL-100: ±99.999 mm to ±99 mm (4 levels selectable), IL-300/IL-600: ±999.99 mm to ±999 mm (3 levels selectable), IL-2000: ±9999.9 mm to ±9999 mm (2 levels selectable)
	Display rate	Approx. 10 times/sec.
Analog voltage output		None
Analog current output
Control input	Bank switch input	Non-voltage input^*1
	Zero-shift input
	Stop emission input
	Timing input
	Reset input
Control output	Judgement output	Open collector output (NPN, PNP changeover possible/N.O., N.C. changeover possible)^*2
	Alarm output	Open collector output (NPN, PNP changeover possible/N.C.)^*2
Current	Power voltage	Supplied by main unit^*3
	Power consumption	2200 mW or less (at 30 V: 74 mA or less)
Environmental resistance	Pollution degree	2
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No condensation or freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Case / Front sheet: Polycarbonate; Key tops: Polyacetel; Cable: PVC
Weight		Approx. 160 g (including attachments)
^1 Assign an input of your choice to the 4 external input lines before using. ^2 The NPN open collector rated output is: 50 mA max./ch (20 mA when adding an expansion unit) less than 30 V, residual voltage less than 1 V (less than 1.5 V when adding over 6 units including the main unit) The PNP open collector rated output is: 50 mA max./ch (20 mA/ch when adding expansion units), less than power voltage, and less than 2 V residual voltage (less than 2.5 V when adding over 6 units including the main unit) ^*3 If there are over 6 additional expansion units, please use a power voltage of 20 to 30 V.

Keyence IL-1500 Keyence

$908.91

In stock, 16 units

Specifications

Model		IL-1500
Type		Panel mount
Main unit/Expansion unit		Main unit
Head compatibility		Compatible
Display	Minimum displayable unit	IL-030: 1 µm, IL-065/IL-100: 2 µm, IL-300: 10 µm, IL-600: 50 µm, IL-2000: 100 µm
	Display range	IL-030/IL-065/IL-100: ±99.999 mm to ±99 mm (4 levels selectable), IL-300/IL-600: ±999.99 mm to ±999 mm (3 levels selectable), IL-2000: ±9999.9 mm to ±9999 mm (2 levels selectable)
	Display rate	Approx. 10 times/sec.
Analog voltage output		±5 V, 1 to 5 V, 0 to 5 V Output impedance 100 Ω^*1
Analog current output		4 to 20 mA Maximum load resistance of 350 Ω^*1
Control input	Bank switch input	Non-voltage input^*2
	Zero-shift input
	Stop emission input
	Timing input
	Reset input
Control output	Judgement output	Open collector output (NPN, PNP changeover possible/N.O., N.C. changeover possible)^*3
	Alarm output	Open collector output (NPN, PNP changeover possible/N.C.)^*3
Current	Power voltage	10 to 30 VDC ripple (P-P) 10% included, Class 2^*4
	Power consumption	2500 mW or less (at 30 V: 84 mA or less)
Environmental resistance	Pollution degree	2
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No condensation or freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Case / Front sheet: Polycarbonate; Key tops: Polyacetel; Cable: PVC
Weight		Approx. 170 g (including attachments)
^1 Select and use one of ±5 V, 1 to 5 V, 0 to 5 V or 4 to 20 mA. ^2 Assign an input of your choice to the 4 external input lines before using. ^3 The NPN open collector rated output is: 50 mA max./ch (20 mA when adding an expansion unit) less than 30 V, residual voltage less than 1 V (less than 1.5 V when adding over 6 units including the main unit) The PNP open collector rated output is: 50 mA max./ch (20 mA/ch when adding expansion units), less than power voltage, and less than 2 V residual voltage (less than 2.5 V when adding over 6 units including the main unit) ^4 If there are over 6 additional expansion units, please use a power voltage of 20 to 30 V.

Keyence IL-1050 Keyence

$378.14

In stock, 13 units

Specifications

Model		IL-1050
Type		DIN-rail mount
Main unit/Expansion unit		Expansion unit
Head compatibility		Compatible
Display	Minimum displayable unit	IL-030: 1 µm, IL-065/IL-100: 2 µm, IL-300: 10 µm, IL-600: 50 µm, IL-2000: 100 µm
	Display range	IL-030/IL-065/IL-100: ±99.999 mm to ±99 mm (4 levels selectable), IL-300/IL-600: ±999.99 mm to ±999 mm (3 levels selectable), IL-2000: ±9999.9 mm to ±9999 mm (2 levels selectable)
	Display rate	Approx. 10 times/sec.
Analog voltage output		None
Analog current output
Control input	Bank switch input	Non-voltage input^*1
	Zero-shift input
	Stop emission input
	Timing input
	Reset input
Control output	Judgement output	Open collector output (NPN, PNP changeover possible/N.O., N.C. changeover possible)^*2
	Alarm output	Open collector output (NPN, PNP changeover possible/N.C.)^*2
Current	Power voltage	Supplied by main unit^*3
	Power consumption	2000 mW or less (at 30 V: 67 mA or less)
Environmental resistance	Pollution degree	2
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No condensation or freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Case / Front sheet: Polycarbonate; Key tops: Polyacetel; Cable: PVC
Weight		Approx. 140 g (including attachments)
^1 Assign an input of your choice to the 4 external input lines before using. ^2 The NPN open collector rated output is: 50 mA max./ch (20 mA when adding an expansion unit) less than 30 V, residual voltage less than 1 V (less than 1.5 V when adding over 6 units including the main unit) The PNP open collector rated output is: 50 mA max./ch (20 mA/ch when adding expansion units), less than power voltage, and less than 2 V residual voltage (less than 2.5 V when adding over 6 units including the main unit) ^*3 If there are over 6 additional expansion units, please use a power voltage of 20 to 30 V.

Keyence IL-1000 Keyence

$378.14

In stock, 14 units

Specifications

Model		IL-1000
Type		DIN-rail mount
Main unit/Expansion unit		Main unit
Head compatibility		Compatible
Display	Minimum displayable unit	IL-030: 1 µm, IL-065/IL-100: 2 µm, IL-300: 10 µm, IL-600: 50 µm, IL-2000: 100 µm
	Display range	IL-030/IL-065/IL-100: ±99.999 mm to ±99 mm (4 levels selectable), IL-300/IL-600: ±999.99 mm to ±999 mm (3 levels selectable), IL-2000: ±9999.9 mm to ±9999 mm (2 levels selectable)
	Display rate	Approx. 10 times/sec.
Analog voltage output		±5 V, 1 to 5 V, 0 to 5 V Output impedance 100 Ω^*1
Analog current output		4 to 20 mA Maximum load resistance of 350 Ω^*1
Control input	Bank switch input	Non-voltage input^*2
	Zero-shift input
	Stop emission input
	Timing input
	Reset input
Control output	Judgement output	Open collector output (NPN, PNP changeover possible/N.O., N.C. changeover possible)^*3
	Alarm output	Open collector output (NPN, PNP changeover possible/N.C.)^*3
Current	Power voltage	10 to 30 VDC ripple (P-P) 10% included, Class 2^*4
	Power consumption	2300 mW or less (at 30 V: 77 mA or less)
Environmental resistance	Pollution degree	2
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No condensation or freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Case / Front sheet: Polycarbonate; Key tops: Polyacetel; Cable: PVC
Weight		Approx. 150 g (including attachments)
^1 Select and use one of ±5 V, 1 to 5 V, 0 to 5 V or 4 to 20 mA. ^2 Assign an input of your choice to the 4 external input lines before using. ^3 The NPN open collector rated output is: 50 mA max./ch (20 mA when adding an expansion unit) less than 30 V, residual voltage less than 1 V (less than 1.5 V when adding over 6 units including the main unit) The PNP open collector rated output is: 50 mA max./ch (20 mA/ch when adding expansion units), less than power voltage, and less than 2 V residual voltage (less than 2.5 V when adding over 6 units including the main unit) ^4 If there are over 6 additional expansion units, please use a power voltage of 20 to 30 V.

Keyence IL-S100 Keyence

$676.10

In stock, 18 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IL-300 Keyence

$691.77

In stock, 19 units

Specifications

Model		IL-300
Reference distance		300 mm 11.81"
Measurement range		160 to 450 mm 6.30" to 17.72"
Light source	Type	Red semiconductor laser, wavelength: 655 nm (visible light)
	Laser class	Class 2 (FDA (CDRH) Part1040.10)^*1 Class 2 (IEC 60825-1)
	Output	560 µW
Spot diameter (at standard distance)		Approx. ø0.5 mm ø0.02"
Linearity		±0.25% of F.S. (160 to 440 mm 6.30" to 17.32")^2^3
Repeatability		30 µm^*4
Sampling rate		0.33/1/2/5 ms (4 levels available)
Operation status indicators		Laser emission warning indicator: Green LED, Analog range indicator: Orange LED, Reference distance indicator: Red/Green LED
Temperature characteristics		0.08% of F.S./°C^*5
Environmental resistance	Enclosure rating	IP67
	Pollution degree	3
	Ambient light	Incandescent lamp: 5,000 lux^*6
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No condensation or freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Housing material: PBT, Metal parts: SUS304, Packing: NBR, Lens cover: Glass, Cable: PVC
Weight		Approx. 135 g
^1 The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice. ^2 Value when measuring the KEYENCE standard target (white diffuse object). ^3 F.S. of each model is as follows. IL-030: ±5 mm ±0.20" IL-065: ±10 mm ±0.39" IL-100: ±20 mm ±0.79" IL-300: ±140 mm ±5.51" IL-600: ±400 mm ±15.75" IL-2000: +1000 to -1500 mm 39.37" to -59.05" ^4 Value when measuring the KEYENCE standard target (white diffuse object) at the reference distance, sampling rate: 1 ms, and average number of times: 128. For the IL-300/IL-600, the sampling rate is 2 ms. For the IL-2000, the sampling rate is set to 5ms. ^5 F.S. of each model is as follows. IL-030: ±5 mm ±0.20" IL-065: ±10 mm ±0.39" IL-100: ±20 mm ±0.79" IL-300: ±140 mm ±5.51" IL-600: ±400 mm ±15.75" ^6 Value when the sampling rate is set to 2 ms or 5 ms.

Previous Page 2 / 30Next

Filters

In stock (381)
Out of stock (662)