Machine Vision Systems

Keyence OP-88411 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FS-N12CN Keyence

$193.64

In stock, 53 units

Specifications

Model		FS-N12CN
Type		Standard 1 output M8 connector^*1
Output		NPN
Main unit/expansion unit		Expansion unit
Control output		1 NPN open collector 24 V; 1 output max: 100 mA or less; 2 output total: 100 mA or less (used stand-alone)/20 mA or less (multiple connections); residual voltage 1 V or less
Monitor output (1-5 V)		-
External input		1 Input time 2 ms (ON)/20 ms (OFF) or more (25 ms or more (ON/OFF) when external calibration is selected.)
Light source LED		Red, 4-element LED
APC		ON/OFF switchable (Factory setting: OFF)
Response time		50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)
Number of interference prevention units		0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA (When set to double, the number of interference-prevention units will be doubled.)
Unit expansion		Up to 16 units can be connected total (two output type is treated as two units)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current Consumption	Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V)^2 Eco on mode: 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V)^2 Eco Full mode: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V)
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less
	Ambient temperature	-20 to +55 °C -4 to +131 °F (No freezing)^*3
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Case material		Both main unit and expansion unit housing material: Polycarbonate
Weight		Approx. 22 g
^1 Use a cable length of 30 m 98.43' or less for M8 connector and e-CON connector types. ^2 Increases 100 mW (4.0 mA) for High Speed mode ^*3 One or two more units connected: -20 to +55 °C (-4 to +131 °F); 3 to 10 more units connected: -20 to +50 °C (-4 to +122 °F); 11 to 16 more units connected: -20 to +45 °C (-4 to +113 °F). When using 2-outputs, one unit is counted as two units. All temperature regulations are for when the unit is mounted on a DIN rail and installed on metal sheeting.

Keyence OP-86939 Keyence

$0.00

Sold Out

Specifications

Model				OP-86939
Type				Dedicated L-shaped mounting bracket with angle alignment
Applicable product				SZ
Material				SPHC
Weight				Approx. 960 g

Keyence MP-FG20 Keyence

$3,108.24

Only 1 unit left

Specifications

Model		MP-FG20
Type		Single model
Connection bore diameter		G1/2" (15A)
Supported gases		Air and non-corrosive gases
Supported gas temperature		-5 to +50°C, 23 to 122°F
Operating pressure range		0.2 to 1 MPa, 2 to 10 bar, 29 to 145 psi ^*1
Pressure resistance		1.5 MPa, 15 bar, 217.5 psi
Flow rate	Detection principle	Heat based (mass flow rate)
	Rated flow range (normal)	4 to 2000 L/min 0.2 to 120.0 m³/h 7.06 to 4237.76 ft³/h 0.1 to 70.6 CFM
	Zero cut flow rate	4 L/min, 0.2 m³/h 7.06 ft³/h, 0.1 CFM
	Measurement accuracy	±(1.5% of RD + 0.5% of F.S.) ^2 ^3
	Repeatability	±1.0% of F.S. (with an averaging time of 1.0 s)
	Display resolution	1 L/min, 0.1 m³/h 3.53 ft³/h, 0.1 CFM
	Response time	150 ms (63% response) ^*4
	Averaging time	OFF/100 ms/200 ms/500 ms/1.0 s/3.0 s/5.0 s/10 s/30 s (selectable)
Pressure (Digital value, gauge pressure)	Rated pressure range	0.000 to 1.000 MPa, 0.00 to 10.00bar, 0.0 to 145.0 psi
	Measurement accuracy	±2.0% of F.S.
	Repeatability	±0.2% of F.S. (with a response time of 50 ms)
	Display resolution	0.001 MPa, 0.01 bar, 0.1 psi
	Response time	Selectable from 10 ms, 50 ms, 100 ms, 500 ms, 1.0 s, and 5.0 s ^*4
Humidity (Dew point)	Rated relative humidity range/ dew point range	15 to 100%RH (no condensation)/Corresponds to the relative humidity range ^5 ^6
	Measurement accuracy	±4°C, ±7°F ^5 ^6
	Display resolution	5%RH/1°C, 1°F ^5 ^6
Temperature	Measurement accuracy	±2.0°C, ±3.6°F ^*7
	Display resolution	0.1°C, 0.1°F ^*7
Shut-off valve	Response time	1 s or less (closed → open)
	Leakage amount	50 mL/min 0.002 CFM (N) or less
Filter/regulator (Standard model only)	Pressure adjustment range	─
	Filtration degree
	Drainage cup capacity
Check valve		Available
Display		Color LCD, status indicator
Data accumulation	Accumulation period	Accumulated data: approx. 2 years/Instantaneous data: approx. 2 weeks
	Data reading	USB 2.0/Ethernet
I/O	Control output (Ch.1/2/3/4/5)	NPN/PNP setting switchable, open collector output 30 VDC or less, N.O./N.C. setting switchable, max. 100 mA/Ch., residual voltage: 2.5 V or less
	Analog output (Ch.1/2)	4 to 20 mA, load resistance: 260 Ω or less ^*4
	External input (Ch.2/3/6)	Short-circuit current: 1.5 mA or less, input time: 20 ms or more
Protection circuit		Power supply reverse connection protection, power supply surge protection, reverse connection protection for each I/O, surge protection for each I/O, overcurrent protection for each output
Power supply	Power voltage	24 VDC +25%/-20% (including ripple), Class 2 or LPS
	Power consumption	1.2 A (300 ms) when opening/closing valve, 100 mA at all other times ^*8 (standalone usage; excluding load current)
Communication interface		USB2.0
Network compatibility		When using only this unit: IO-Link (Specification v1.1/COM3) ^*9 When connecting MP-FEN1 : EtherNet/IP™, PROFINET, Modbus/TCP, MC protocol/SLMP
Environmental resistance	Enclosure rating	IP67 (IEC60529) ^*10
	Ambient temperature	−5°C to +50°C 23°F to 122°F (no freezing) ^*11
	Relative humidity	35%RH to 85%RH (no condensation)
	Vibration resistance	10 to 500 Hz; power spectral density: 0.204 G²/Hz; X, Y, and Z directions
	Shock resistance	300 m/s², XYZ axes, 10 times for each axis
Material		Sensor part : PET/PPS/PBT/POM/aluminum/SPHC Filter/regulator : Aluminum/POM/HDPE/NBR/Nylon ^*12
Weight		Approx. 1020 g 35.98 oz
^1 An upstream side pressure of 0.2 MPa or less (a filter/regulator adjustment pressure of 0.2 MPa or less for the standard model) worsens the flow rate characteristic of the shut-off valve. ^2 This value is guaranteed by KEYENCE inspection facilities while testing with air. Errors will be introduced by factors such as the gas type, gas temperature, and ambient temperature. ^3 Value in an environment with a constant temperature of 25°C 77°F and compressed air evaluated as purity class 11 (ISO 8573-1 (2010)/JIS B 8392-1 (2012)).±(5.5% of RD + 0.5% of F.S.) when equivalent to purity class 34. ^4 15 ms is added to the analog output response time. ^5 Measurable when at least 2% of F.S. worth of gas is flowing. ^6 The prescribed accuracy may not be met or the unit may be damaged if the compressed air contains a large amount of oil mist, organic solvent, or other gas. (For details, see “Gas Being Measured” on page 4.) ^7 When the flow is 5% of F.S. or higher. Errors due to heat generated by the main unit occur when the flow is too small. ^8 When connecting MP-FEA1 and/or MP-FEN1, add each device’s current consumption (2.1 A or less including load current). ^9 Use an IO-Link master that can supply 1.2 A or more. (1.6 A or less when connecting an MP-FEA1 and an MP-FEN1.) IO-Link is a registered trademark or trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^10 When protection is provided to prevent dust and liquid from intruding through the exhaust port. The IP67 enclosure rating is lost when a USB connection is established. ^11 If this product is used with a power supply voltage of 26.4 V or more, the upper limit on the ambient temperature is 45°C 113°F. ^12 Nylon is only used on the MP-Fx20R.

Keyence OP-88666 Keyence

$337.49

Only 2 units left

Specifications

Model				OP-88666
Type				Ethernet cable (M12 X-coded 8-pin) NFPA79-compatible
Length				10 m 32.8'
Weight				Approx. 650 g

Keyence CA-DC30E Keyence

$675.00

Only 7 units left

Specifications

Model		CA-DC30E
Type		Illumination Controller Only for XG/CV-X200/CV-X100 Series Compatible with CA-DRWxX lights only
Input		-
Output	Light control method	Constant current control method
	Intensity range	255 level digital [Program setting]
	Connection points	2 ch (dedicated 6-pole circular connector)
	Voltage	LumiTrax^TM light dedicated power supply
	Capacity	Max. 81 W
	Synchronization	Camera trigger/shutter speed synchronization
	Response speed	Under 1 ms
Display	LED display	Power indication, light status indication (2 ch individually)
Rating	Power voltage	24 VDC ±10 %
	Current consumption	5 A (at maximum load)^*1
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F^2^3
	Relative humidity	85%RH or less (No condensation)^*4
Weight		Approx. 430 g
^1 Out of which the current consumption of controller is 1.6 A. ^2 Environmental resistance of the light emitting part is 0 to +40 °C 32 to 104 °F ambient temperature and 35 to 65 % RH ambient humidity (no condensation). ^3 Limited by the ambient temperature of connected controllers. ^4 Environmental resistance of the light emitting part is 0 to +40 °C 32 to 104 °F ambient temperature and 65%RH or less ambient humidity (No condensation).

Keyence SV2-300L2 Keyence

$2,060.86

Only 2 units left

Specifications

Model				SV2-300L2
General specifications	Capacity			3.0 kW
	Input power supply	Voltage/frequency	Main circuit	3-phase 200 to 240 VAC +10 to -15%, 50/60 Hz 270 to 324 VDC ^*1
			Control circuit	Single-phase 200 to 240 VAC +10 to -15%, 50/60 Hz 270 to 324 VDC ^*1
		Allowable frequency fluctuation	Main circuit/control circuit	No more than ±5%
		Overvoltage category		III
	Control mode			Three-phase full-wave rectification, IGBT, PWM control, sine-wave current driving method
	Feedback			22-bit serial encoder (absolute) communication, fully closed control serial communication, analog feedback
	Operating environment	Operating atmosphere	Enclosure rating	IP10
			Pollution degree	Pollution degree: 2 (in an IP54 or higher control panel) However, usage under the following requirements required: • No corrosive gas or flammable gas present • No exposure to water, oil, or chemicals • No dust present
		Operating ambient temperature		-5 to +60°C 23 to 140°F (no freezing; reduced ratings at +55°C 131°F or more)
		Storage ambient temperature		-20 to +85°C -4 to +185°F (no freezing)
		Operating/storage ambient temperature		95% RH or less (no condensation)
		Altitude		2000 m 6561.7' or less above sea level (usable at reduced ratings at 1000 m 3280.8' or more)
		Vibration resistance		4.9 m/s² 16.1'/s² (JIS C60068-2-6 compliant)
		Impact resistance		19.6 m/s² 64.3'/s² ( JIS C60068-2-27 compliant)
		Other		No static electricity noise, strong electric fields, magnetic fields, or radiation present
	Min. insulation resistance			500 VDC, 1 MΩ or more with insulation resistance tester
	Applied standard	UL/CSA standards		UL61800-5-1, CSA22.2 No.274
		CE marking	Low-voltage directive	EN61800-5-1, EN50178
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Structure	Type		Attached to base mount
	Safety function			STO function (STO/EN61800-5-2)
	Safety function	Safety parameters		SIL3/EN61508, SIL CL 3/EN62061, PLe (Category3) / EN ISO13849-1: 2008
		Response time		8 ms (max.)
		Input		STO1, STO2: Base block signal for power module Internal impedance: 4.7 kΩ Operable voltage range: +24 V ±20% Max. delay time: 8 ms (Time from turning STO1, STO2 off until motor current cutoff)
		Output		EDM: Built-in safety circuit status monitoring (fixed output) Max. allowable voltage: 30 VDC Max. allowable current: 50 mA DC Max. voltage drop at ON: 1.5 V Max. delay time: 8 ms (Time from changing STO1, STO2 until EDM change)
		Applied standard		EN61800-5-2, EN ISO13849-1: 2008, EN61508, EN62061, EN60204-1, EN61326-3-1
	Protection function			Overcurrent, overvoltage, undervoltage, overload, regenerative abnormalities, etc.
	Insulation withstand voltage			1500 VAC or more (between primary side and ground) 3000 VAC or more (between primary side and secondary side) 350 VAC: Between secondary circuit and ground
	Weight			Approx. 2.7 kg
Power supply/current capacity and power loss	Main circuit power supply			Three-phase 200 V
	Max. applicable motor capacity			3.0 kW
	Power supply capacity for 1 amplifier			Three-phase 200 V: 5.9 kVA
	Output current	Continuous		19.6 Arms
		Max.		56 Arms
	Main circuit power loss			113.8 W
	Regenerative resistor power loss			16 W
	Control circuit power loss			22 W
	Total power loss			151.8 W
	Rated input current	Main circuit		Three-phase 200 V: 15 Arms
		Control circuit		0.25 Arms
	Rush current	Main circuit		34 A
		Control circuit
Performance specifications	Performance	Speed control range		1:5000 (load torque ≤ rated torque conditions)
		Speed fluctuation rate	At load fluctuation	±0.01% or less with load fluctuations of 0 to 100% (at rated rotation speed)
			At main circuit voltage change	0% with ±10% of rated voltage (at rated rotation speed)
			At ambient temperature change	±0.1% or less with ambient temperatures of 0 to +50°C 32 to 122°F (at rated rotation speed)
		Torque control accuracy (reproducibility)		±1%
		Speed frequency response frequency		2.6 kHz
	Dynamic brake			Operated at main circuit power supply OFF, servo alarm, limit switch detection (LSP/LSN), forced stop detection (FSTOP)
	Regenerative resistor			Built-in regenerative resistor: 50 W to 400 W ... not installed 750 W to 5.0 kW ... installed External regenerative resistor: OP-84399 (50 W to 1.0 kW) OP-87073 (1.5 kW ^*2)
	Display Function	Panel function		7-segment LED Rotary switch ×2 (16 ch) Slide switch ×1 (4 ch)
		Status display LED		CHARGE: For notification of main circuit power supply input (orange) POWER: For notification of control circuit power supply input (green) CONNECT: For notification of connection (green) LINK1, LINK2: For notification of MECHATROLINK communication (green)
	Auxiliary function			Gain control, alarm history, Z-phase search, etc.
I/O specifications	Sequence input signal	Number of inputs		7 (3 high-speed input, 4 general input)
		Max. input voltage		28.8 VDC
		Rated input voltage		24 VDC
		Min. ON voltage		19 VDC
		Min. OFF current/voltage		High-speed input: 0.6 mA, general input: 0.3 mA
		Common point mode		7 points/1 common point (1 terminal) (bidirectional)
		Input time constant		250 μs, 500 μs, 1 ms, 2.5 ms, 5 ms, 10 ms
		Input current		High-speed input: 4.5 mA, general input: 3.7 mA
		Input impedance		Approx. 4.7 kΩ
		Assignable input signals		Full signal assignment, logic-settable forced stop (FSTOP), external latch signals 1 to 3 (EXT1, EXT2, EXT3), origin return deceleration switch (DEC), forward limit switch (LSP), reverse limit switch (LSN), forward torque limit selection (PTL), reverse torque limit selection (NTL)
	Sequence output signal	Number of outputs		4
		Output mode		Transistor NPN output
		Rated load		30 VDC / 50 mA
		Leakage current when OFF		0.1 mA
		Residual voltage when ON		1.5 VDC or less
		Common point mode		Independent common
		Assignable output signals		Individual signal assignment excluding ALARM signal, logic-settable alarm (ALARM), in position (INPOS), speed matching (VCMP), zero speed detection (ZSP), operation preparation complete (RDY), torque limiting (TLM), speed limiting (VLM), electromagnetic brake timing (BRAKE), warning (WARN), Positioning proximity (NEAR)
	Analog Feedback Input signal monitor	Max. input voltage		±12 V
		Accuracy		±1% of F.S.
		Resolution		±10 bits
		Input impedance		30 kΩ
	Encoder division pulse output signal	Output mode		Phase A (A+/A−), phase B(B+/B−), phase Z (Z+/Z−): Differential line-driver output
		Line driver		SN75ALS174 (T.I.) or equivalent
		Output frequency		1.6 Mbps (with 2-phase, 4 times multiplication, 6.4 MHz or equivalent) ^*3
	Analog monitor output	No. of channels		2 ch
		Output range		±10 V (linearity valid range ±8 V)
		Resolution		16 bits
		Conversion precision		±20 mV (typ.)
		Max. allowable load current		±10 mA
		Conversion speed		1.2 ms (typ.)
Communication specifications	MECHATROLINK-III communication	Communication protocol		MECHATROLINK-III
		Station address		03H to EFH (Max. number of connectable slaves: 62)
		Transmission speed		100 Mbps
		Transmission frequency		125 μs, 250 μs, 500 μs, 750 μs, 1 to 4 ms (in multiples of 0.5 ms)
		Communication cycle		Support for values starting at transmission frequency × 1
		Number of transmitted bytes		32 bytes/station, 48 bytes/station (selectable with slide switch)
		Transmission media/cable		Category 5e-compliant, STP cross cable
		Operating specifications		Position control / speed control / torque control
		Command input		MECHATROLINK-III command (sequence, motion, monitor, adjustment, etc.)
		Max. transmission distance		50 m 164.0' ^*4
	USB communication	Connected device		PC
		Communication standard		USB 2.0-compliant
		Function		Status display, parameter setting, tuning, etc.
^1 When using a DC power supply input, set “AC/DC power supply” to “DC”. ^2 Use of 2 kW, 3 kW, and 5 kW servo amplifiers is possible depending on the operating conditions. ^3 The division ratio can be set arbitrarily with a parameter. ^*4 For instances with 30 m 98.4' or more, use ferrite cores (OP-84409) with 2 turn-winding.

Keyence F-V2 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-R77G Keyence

$0.00

Sold Out

Specifications

Model		FU-R77G^*1
Type		Threaded and Hex-Shaped Active Receiver Fibers
Optical axis diameter		Transmitter: ø 1ø 0.04" Receiver: ø 3.2ø 0.13"
Size		M4
Fibre unit length		1 m3.3'Cut not allowed
Shape		Threaded
Minimum bend radius		R10 mmR0.39"Stainless Steel
Environmental resistance	Ambient temperature	−40 to +60 ˚C -40 to +140 °F
Weight		Approx. 41 g
^*1 For details on the detecting distance, see the fiber amplifier catalog.

Keyence LS-7030T Keyence

$2,176.18

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CL-S015 Keyence

$0.00

Sold Out

Specifications

Model				CL-S015 ^*1
Type				Sensor head (Ultra-high-accuracy 15 mm model)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.

Keyence SJ-Q132 Keyence

$0.00

Sold Out

Specifications

Model		SJ-Q132
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method / Applied voltage		Pulse AC method/±8000 Vmax
Ion balance control method		Hi-Power I.C.C. method
Ion balance		±3 V ^*1
Clean rating		ISO14644-1 Class 3 ^*2
Installation distance		10 mm 0.39" or more
Control input	Static elimination stop input	NPN open collector or non-voltage contact signal
Control output	Ion level warning, condition warning, alarm output	NPN open collector Maximum 100 mA (40 VDC or less)
	Condition alarm output
	Alarm output
Communication functions		Remote control
Average power consumption		Normal operation: 8.4 W, LPC mode: 4.1 W ^*3
Major functions		Condition alarm, ion level alarm, alarm output
Air connection port		Rc1/8
Air supply pressure		0.1 to 0.5 MPa 14.50 to 72.52 PSI (recommended air pressure: 0.2 MPa 29.01 PSI)^*4
Effective length		1400 mm 55.12" ^*5
Total length		1280 mm 50.39"
No. ofelectrodes		21
Rating	Power voltage	24 to 36 VDC±10%
	Current consumption	Normal operation: 700 mA or less, LPC mode: 170 mA (typical) ^*3
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	85% RH or less (no condensation)
Material	Electrode probe	Tungsten
	Main body	ABS/PBT/PP/LCP/PPS/SPS/SUS
Weight		1580 g 55.77 oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81", Air supply pressure: 0.2 MPa 29.01 PSI, Frequency: Highest device driving frequency, Operating ambient temperature: 0 to +40°C 32 to 104°F, Operating ambient humidity: 35 to 65% RH, Measurement position: Bar Center ^2 Contact us for detailed conditions. ^3 24 VDC ^4 If you wish to use the air purge function with intermittent air supply, contact us. ^*5 Effective length is for static elimination range when installation distance is 100 mm 3.94".

Keyence GL-R72H-T Keyence

$2,537.50

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-26500 Keyence

$0.00

Sold Out

Specifications

Model				OP-26500
Type				Adapter A for f1.3 Fiber Unit
Applicable product				ø1.3 fiber unit
Number included				1 pcs.
Note				Necessary when small diameter fiber unit is used with FS-N/V/T/M Series. Adapter is attachment of the fiber unit.

Keyence TM-X5040 Keyence

$0.00

Sold Out

Specifications

Model			TM-X5040
Transmitter/receiver distance			180 mm 7.09"
Measuring range	Field of view	High-accuracy measurement area	ø26 mm ø1.02"
		Measurement area	ø40 mm ø1.57"
	Depth of field	High-accuracy measurement area	10 mm 0.39"
		Measurement area	20 mm 0.79"
Exposure time			25/50/100 μs (Adjustable 3-stage)
Imaging time (Trigger interval)			Approx. 24 ms (at “Full” vertical/horizontal measurement range sizes) Approx. 3 ms (at “4/16” vertical/horizontal measurement range sizes)
Light source			InGaN green LED
Measurement position accuracy	High-accuracy measurement area		±1 μm ±0.000039" ^*1
	Measurement area		±2 μm ±0.000079" ^*1
Repeatability			±0.08 μm ±0.000003" ^*2
Pixel resolution			Approx. 21 μm 0.000827"
Environmental resistance	Enclosure rating		IP64 ^*3
	Ambient temperature		0 to +45°C 32 to 113°F
	Relative humidity		85% RH or less (No condensation)
Material			Aluminum
Weight			Transmitter: Approx. 620 g 21.89 oz Receiver: Approx. 890 g 31.42 oz Base: Approx. 670 g 23.65 oz
^1 Error when measuring width of KEYENCE standard object (glass calibration scale). ^2 Average value of ±2σ measuring the width of a KEYENCE standard object (glass calibration scale) 16 times in the center of the measurement area. ^*3 Excluding connectors and cable boxes.

Keyence CA-LS4 Keyence

$0.00

Sold Out

Specifications

Model				CA-LS4
Type				Lens
Overview				Specialised lens for the compact camera (ø12 ø0.47").

Keyence KV-U5 Keyence

$301.50

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence BL-601 Keyence

$465.75

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-E300A Keyence

$0.00

Sold Out

Specifications

Model		SJ-E300A
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method / Applied voltage		Pulse AC method/±8000 V
Ion balance control method		Hi-Power I.C.C. method
Ion balance		±30 V^*1
Installation distance		50 to 2000 mm 1.97" to 78.74"
Control input	Static elimination stop input	NPN open collector or contact point signal without voltage
Control output	Ion level warning, condition warning, alarm output	NPN open collector, Maximum 100 mA (40 VDC or less)
	Condition alarm output
	Alarm output
Major functions		Condition alarm, ion level alarm, alarm output
Air connection port		Rc 1/8
Air supply pressure		0.1 MPa to 0.5 MPa^*2 (recommended air pressure of 0.2 MPa)
Effective length		3060 mm 120.47"^*3
Total length		2960 mm 116.54"
No. ofelectrodes		49
Rating	Power voltage	24 VDC to 36 VDC ±10%
	Current consumption	700 mA (at 24 V), 500 mA (at 36 V)
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	35 to 85% RH (no condensation)
Material	Electrode probe	Tungsten
	Main body	ABS/PBT/PP/LCP/PPS/SPS/SUS
Weight		2900 g 102.29oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81" or more, Air supply pressure: 0.2 Mpa, Frequency: The highest device driving frequency, Operating ambient temperature: 0 to +40°C 32 to 104°F, Operating ambient humidity: 35 to 65% RH ^2 Contact KEYENCE when using the air purge function with intermittent air supply. ^*3 Effective length is for static elimination range when installation distance is 50 mm 1.97".

Keyence KV-D30 Keyence

$1,277.36

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87555 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence BL-651HA Keyence

$1,406.50

Only 8 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87586 Keyence

$0.00

Sold Out

Specifications

Model				OP-87586
Cable end				M12 L-shaped type - Loose wires
Length				2 m 6.56'
Material				Covering: PUR, Nut: Nickel plating over zinc die-cast

Keyence EM-054 Keyence

$442.80

Only 5 units left

Specifications

Model		EM-054
Type		Shielded
Shape		5.4 mm 0.21" dia Cylindrical.
Detecting distance		1.2 mm 0.05" ±10%
Detectable object		Ferrous metals (see Characteristics for non-ferrous metals)
Standard target (iron, t=1 mm 0.04")		6 x 6 mm 0.24"
Hysteresis		10% max. of detecting distance
Response frequency		1.2 kHz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at +23°C 73.4°F, within -10 to +70°C 14 to 158°F
Display indicator		Red LED
Output		NPN
Control output		NPN: 200 mA (40 V) max., Residual voltage: 1 V max.
Housing		Stainless steel
Rating	Power voltage	10.8 to 30 VDC, Ripple (P-P) 10 % or less^*1
	Current consumption	12 mA or less
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
Weight		Approx. 40 g (including nuts and 2-m 6.6' cable)
^*1 Make sure that the power voltage stays within 10.8 V to 30 V even if it is affected by ripple effects.