Machine Vision Systems

Keyence OP-88204 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-VA1760 Keyence

$0.00

Sold Out

Specifications

Model				GL-VA1760
Compatible with GL-V models				GL-VM175F, GL-VM88H, GL-VM44L (both PNP/NPN)
Total length				1760 mm 69.29"
Material				Polycarbonate ABS
Weight				190 g

Keyence IV4-L4C Keyence

$1,957.50

Only 1 unit left

Specifications

Model		IV4-L4C
Compatible sensor		IV4-400CA
Lights	Illumination	White LED
Power supply		Power supplied via connected sensor
Environmental resistance	Enclosure rating	IP67 ^*1
	Ambient temperature	0 to +50°C 32 to +122°F (no freezing)
	Relative humidity	85% RH or less (no condensation)
Material		Main unit case: Aluminum die-casting. Front cover: Acrylic ^*2
Weight		Approx. 195 g 6.88 oz
^1 Only when attached to applicable sensor. Except when polarizing filters (OP-88644/OP-88645/OP-88646/OP-88647) are installed. ^2 ESD safe, IEC61340-5-1 compliant.

Keyence SV2-200L2 Keyence

$1,721.85

Only 3 units left

Specifications

Model				SV2-200L2
General specifications	Capacity			2.0 kW
	Input power supply	Voltage/frequency	Main circuit	3-phase 200 to 240 VAC +10 to -15%, 50/60 Hz 270 to 324 VDC ^*1
			Control circuit	Single-phase 200 to 240 VAC +10 to -15%, 50/60 Hz 270 to 324 VDC ^*1
		Allowable frequency fluctuation	Main circuit/control circuit	No more than ±5%
		Overvoltage category		III
	Control mode			Three-phase full-wave rectification, IGBT, PWM control, sine-wave current driving method
	Feedback			22-bit serial encoder (absolute) communication, fully closed control serial communication, analog feedback
	Operating environment	Operating atmosphere	Enclosure rating	IP10
			Pollution degree	Pollution degree: 2 (in an IP54 or higher control panel) However, usage under the following requirements required: • No corrosive gas or flammable gas present • No exposure to water, oil, or chemicals • No dust present
		Operating ambient temperature		-5 to +60°C 23 to 140°F (no freezing; reduced ratings at +55°C 131°F or more)
		Storage ambient temperature		-20 to +85°C -4 to +185°F (no freezing)
		Operating/storage ambient temperature		95% RH or less (no condensation)
		Altitude		2000 m 6561.7' or less above sea level (usable at reduced ratings at 1000 m 3280.8' or more)
		Vibration resistance		4.9 m/s² 16.1'/s² (JIS C60068-2-6 compliant)
		Impact resistance		19.6 m/s² 64.3'/s² ( JIS C60068-2-27 compliant)
		Other		No static electricity noise, strong electric fields, magnetic fields, or radiation present
	Min. insulation resistance			500 VDC, 1 MΩ or more with insulation resistance tester
	Applied standard	UL/CSA standards		UL61800-5-1, CSA22.2 No.274
		CE marking	Low-voltage directive	EN61800-5-1, EN50178
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Structure	Type		Attached to base mount
	Safety function			STO function (STO/EN61800-5-2)
	Safety function	Safety parameters		SIL3/EN61508, SIL CL 3/EN62061, PLe (Category3) / EN ISO13849-1: 2008
		Response time		8 ms (max.)
		Input		STO1, STO2: Base block signal for power module Internal impedance: 4.7 kΩ Operable voltage range: +24 V ±20% Max. delay time: 8 ms (Time from turning STO1, STO2 off until motor current cutoff)
		Output		EDM: Built-in safety circuit status monitoring (fixed output) Max. allowable voltage: 30 VDC Max. allowable current: 50 mA DC Max. voltage drop at ON: 1.5 V Max. delay time: 8 ms (Time from changing STO1, STO2 until EDM change)
		Applied standard		EN61800-5-2, EN ISO13849-1: 2008, EN61508, EN62061, EN60204-1, EN61326-3-1
	Protection function			Overcurrent, overvoltage, undervoltage, overload, regenerative abnormalities, etc.
	Insulation withstand voltage			1500 VAC or more (between primary side and ground) 3000 VAC or more (between primary side and secondary side) 350 VAC: Between secondary circuit and ground
	Weight			Approx. 2.7 kg
Power supply/current capacity and power loss	Main circuit power supply			Three-phase 200 V
	Max. applicable motor capacity			2.0 kW
	Power supply capacity for 1 amplifier			Three-phase 200 V: 4 kVA
	Output current	Continuous		18.5 Arms
		Max.		42 Arms
	Main circuit power loss			111.9 W
	Regenerative resistor power loss			16 W
	Control circuit power loss			22 W
	Total power loss			149.9 W
	Rated input current	Main circuit		Three-phase 200 V: 10 Arms
		Control circuit		0.25 Arms
	Rush current	Main circuit		34 A
		Control circuit
Performance specifications	Performance	Speed control range		1:5000 (load torque ≤ rated torque conditions)
		Speed fluctuation rate	At load fluctuation	±0.01% or less with load fluctuations of 0 to 100% (at rated rotation speed)
			At main circuit voltage change	0% with ±10% of rated voltage (at rated rotation speed)
			At ambient temperature change	±0.1% or less with ambient temperatures of 0 to +50°C 32 to 122°F (at rated rotation speed)
		Torque control accuracy (reproducibility)		±1%
		Speed frequency response frequency		2.6 kHz
	Dynamic brake			Operated at main circuit power supply OFF, servo alarm, limit switch detection (LSP/LSN), forced stop detection (FSTOP)
	Regenerative resistor			Built-in regenerative resistor: 50 W to 400 W ... not installed 750 W to 5.0 kW ... installed External regenerative resistor: OP-84399 (50 W to 1.0 kW) OP-87073 (1.5 kW ^*2)
	Display Function	Panel function		7-segment LED Rotary switch ×2 (16 ch) Slide switch ×1 (4 ch)
		Status display LED		CHARGE: For notification of main circuit power supply input (orange) POWER: For notification of control circuit power supply input (green) CONNECT: For notification of connection (green) LINK1, LINK2: For notification of MECHATROLINK communication (green)
	Auxiliary function			Gain control, alarm history, Z-phase search, etc.
I/O specifications	Sequence input signal	Number of inputs		7 (3 high-speed input, 4 general input)
		Max. input voltage		28.8 VDC
		Rated input voltage		24 VDC
		Min. ON voltage		19 VDC
		Min. OFF current/voltage		High-speed input: 0.6 mA, general input: 0.3 mA
		Common point mode		7 points/1 common point (1 terminal) (bidirectional)
		Input time constant		250 μs, 500 μs, 1 ms, 2.5 ms, 5 ms, 10 ms
		Input current		High-speed input: 4.5 mA, general input: 3.7 mA
		Input impedance		Approx. 4.7 kΩ
		Assignable input signals		Full signal assignment, logic-settable forced stop (FSTOP), external latch signals 1 to 3 (EXT1, EXT2, EXT3), origin return deceleration switch (DEC), forward limit switch (LSP), reverse limit switch (LSN), forward torque limit selection (PTL), reverse torque limit selection (NTL)
	Sequence output signal	Number of outputs		4
		Output mode		Transistor NPN output
		Rated load		30 VDC / 50 mA
		Leakage current when OFF		0.1 mA
		Residual voltage when ON		1.5 VDC or less
		Common point mode		Independent common
		Assignable output signals		Individual signal assignment excluding ALARM signal, logic-settable alarm (ALARM), in position (INPOS), speed matching (VCMP), zero speed detection (ZSP), operation preparation complete (RDY), torque limiting (TLM), speed limiting (VLM), electromagnetic brake timing (BRAKE), warning (WARN), Positioning proximity (NEAR)
	Analog Feedback Input signal monitor	Max. input voltage		±12 V
		Accuracy		±1% of F.S.
		Resolution		±10 bits
		Input impedance		30 kΩ
	Encoder division pulse output signal	Output mode		Phase A (A+/A−), phase B(B+/B−), phase Z (Z+/Z−): Differential line-driver output
		Line driver		SN75ALS174 (T.I.) or equivalent
		Output frequency		1.6 Mbps (with 2-phase, 4 times multiplication, 6.4 MHz or equivalent) ^*3
	Analog monitor output	No. of channels		2 ch
		Output range		±10 V (linearity valid range ±8 V)
		Resolution		16 bits
		Conversion precision		±20 mV (typ.)
		Max. allowable load current		±10 mA
		Conversion speed		1.2 ms (typ.)
Communication specifications	MECHATROLINK-III communication	Communication protocol		MECHATROLINK-III
		Station address		03H to EFH (Max. number of connectable slaves: 62)
		Transmission speed		100 Mbps
		Transmission frequency		125 μs, 250 μs, 500 μs, 750 μs, 1 to 4 ms (in multiples of 0.5 ms)
		Communication cycle		Support for values starting at transmission frequency × 1
		Number of transmitted bytes		32 bytes/station, 48 bytes/station (selectable with slide switch)
		Transmission media/cable		Category 5e-compliant, STP cross cable
		Operating specifications		Position control / speed control / torque control
		Command input		MECHATROLINK-III command (sequence, motion, monitor, adjustment, etc.)
		Max. transmission distance		50 m 164.0' ^*4
	USB communication	Connected device		PC
		Communication standard		USB 2.0-compliant
		Function		Status display, parameter setting, tuning, etc.
^1 When using a DC power supply input, set “AC/DC power supply” to “DC”. ^2 Use of 2 kW, 3 kW, and 5 kW servo amplifiers is possible depending on the operating conditions. ^3 The division ratio can be set arbitrarily with a parameter. ^*4 For instances with 30 m 98.4' or more, use ferrite cores (OP-84409) with 2 turn-winding.

Keyence CA-LH25 Keyence

$276.87

Only 6 units left

Specifications

Model				CA-LH25
Focal point				25 mm 0.98"
F-stop range (aperture)				F1.4 to F16
Minimum WD				0.2 m 0.7'
Mount				C-mount
Filter size				27.0 mm 1.06" P0.5
Compatible image sensor size				2/3"
TV distortion				-0.04 % (-0.02 %)^*1
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 89 g
^*1 Indicates specification for compatible image sensor size. Value in parenthesis applies to 1/3" image sensor size.

Keyence SV3-B040AK Keyence

$0.00

Sold Out

Specifications

Model				SV3-B040AK ^*1
General specifications	Applicable servo amplifier			SV3-040L2
	Rated output			400 W
	Rated torque			1.27 N·m ^*2
	Instant maximum torque			4.46 N·m
	Rated current			2.5 Arms
	Instant maximum current			9.3 Arms
	Rated rotation speed			3,000 min^-1
	High rotation speed			7,000 min^-1
	Torque constant			0.544 N·m/Arms
	Rotor moment of inertia			0.550 ×10^-4 kg·m²
	Rated power rating			29.3 kW/s
	Rated angle acceleration			23,000 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		26 bit
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or higher)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20% to 80% RH (No condensation)
		Operating atmosphere		Indoors (No corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2,000 m 6,561.7' or less (reduced ratings at 1,000 m 3,280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8 ft/s² with servo motor flange surface as reference (3 directions: up/down, left/right, forward/backward)
		Impact resistance		490 m/s² 1,607.6 ft/s² with servo motor flange surface as reference, 2 times
	Isolation rank			UL: Class A, CE: Class B
	Min. insulation resistance			500 VDC 10 MΩ or more with insulation resistance meter
	Isolation voltage tolerance			1,500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part 15 B, ICES-003. Class A
	Allowable load inertia moment			10×^*3
	Approx. weight			1.7 kg 3.75 lb
Electromagnetic brake specifications	Capacity			6 W
	Rated voltage			24 VDC ±10%
	Rated current (@20°C 68°F)			0.25 A
	Holding torque			1.27 N·m
	Release time			60 ms
	Operating time			100 ms
^1 The open and operation times of the electromagnetic brake depend on the discharge circuit. ^2 50 W to 750 W rated torque is continuously allowable with an ambient temperature of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W/100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with an ambient temperature of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink. ^*3 This is the value at 6,000 min-1. At 7,000 min-1, 200 W becomes 10×, 400 W becomes 5×, and 750 W becomes 8×.

Keyence PR-B04 Keyence

$0.00

Sold Out

Specifications

Model				PR-B04
Type				Mini-slim bracket, rear type
Applicable product				PR-M Series
Number included				1 pcs.
Material				SUS316L
Note				M3 screw × 2, plate nut included
Weight				Approx. 10 g

Keyence XG-HL04M Keyence

$3,123.99

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87034 Keyence

$0.00

Sold Out

Specifications

Model				OP-87034
Type				Transmitter-receiver cable
Length				3 m
Weight				Approx. 130 g 4.59 oz

Keyence OP-M1906 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CZ-V21A Keyence

$317.82

Only 1 unit left

Specifications

Model		CZ-V21A^*1
Output		NPN output
Main unit/expansion unit		Main unit
Response time		200 µs (HIGH SPEED) /1 ms (FINE) /4 ms (TURBO) /8 ms (SUPER)
Control output		NPN open-collector x 4 channels, 40 VDC max., Up to 100 mA for one output, Up to 200 mA in total of 4 outputs, Residual voltage: 1.0 V max.^*2
Protection circuit		Reverse-polarity protection, overcurrent protection, surge absorber
External tuning input, external bank switch input (C/C + I-mode), external shift input (super I-mode)		Input time: 20 ms min.
Timer function		Timer OFF/OFF-delay/ON-delay/One-shot, Timer time: 1 to 1000 ms adjustable (for each bank respectively)
Unit expansion		Up to 3 units (4 units total including the main unit)
Number of interference prevention units		0 for HIGH SPEED; 2 for FINE/TURBO/SUPER
Rating	Power voltage	24 VDC, Ripple (P-P) 10 % or less
	Power consumption	Normal mode: 1.5 W (62.5 mA or less), Eco-mode: 1 W (42.0 mA or less)
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)^*3
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material		Housing, cover: Polycarbonate
Accessories		Mounting Fittings
Weight		Approx. 110 g
^1 The expansion unit of the FS-V20 Series cannot be connected to the main unit of the CZ-V20 Series. To connect the FS and CZ Series units, connect the expansion unit of the CZ-V20 Series to the main unit of the FS-V20 Series. To connect two or more expansion units, connect the CZ-V20 Series units on the right of the FS-V20 Series units. ^2 20 mA max. when several units are connected. ^*3 When several units are connected, the acceptable ambient temperature varies depending on the conditions given below. To connect several units, be sure to mount them to a DIN rail and to limit the output current to a maximum of 20 mA. When 1 or 2 units are connected: -10 to +50 °C 14 to 122 °F When 3 units are connected: -10 to +45 °C 14 to 113 °F

Keyence GV-H45 Keyence

$412.91

Only 6 units left

Specifications

Model			GV-H45
Type			Short-range
Light source			Visible semiconductor laser, Wavelength: 655 nm
Laser class	FDA (CDRH) Part 1040.10		Class 2 (560 µW)
	IEC 60825-1
	JIS C6802
Detection distance (Amplifier display )			20 to 45 mm 0.79" to 1.77" (250 to 0)^*1)
Possible display range			259 to -34
Standard detection deviation			0.5 mm 0.02"
Spot diameter			Approx. ø0.1 mm ø0.004" (Detection distance 45 mm 1.77")
Operation status indicators			Control output: Red LED/Laser radiation emission indicator: Green LED/1 spot indicator: Green LED
Environmental resistance	Enclosure rating		IP67
	Operating ambientluminance	Incandescent lamp	10000ℓx
		Sunlight	20000ℓx
	Ambient temperature		-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material			Housing material: PBT, Display: Polyarylate, Metal: SUS304, Lens cover: Glass, Cable: PVC
Weight			Approx. 120 g^*2
^1 General guideline for amplifier display values relative to detection distance (when distance display mode is set to normal). ^2 Including 2 m 6.6' connector cable (3 m 9.8' cable for GV-H1000)

Keyence MD-F3000W Keyence

$9,425.00

Only 4 units left

Buy the Keyence MD-F3000W - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence MD-F3000W is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence CV-5002 Keyence

$9,573.17

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LHE25 Keyence

$544.13

Only 7 units left

Specifications

Model				CA-LHE25
Focal point				25 mm 0.98"
F-stop range (aperture)				F2.0 to F16
Minimum WD				0.15 m 0.5'
Mount				C-mount
Filter size				40.5 mm 1.59" P0.5
Compatible image sensor size				ø23 mm ø0.91"(full-size C-mount)
TV distortion				-0.57 %
Resolving power				160 cycles/mm at center, 80 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Lens coating				WIDE BAND MULTI COATING
Weight				Approx. 260 g

Keyence CA-CN7RE Keyence

$336.80

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LM-XC100TL2 Keyence

$0.00

Sold Out

Specifications

Model				LM-XC100TL2
Type				Head
Image measurement	Field of view	Wide-field mode [mm inch]		25 0.98" × 25 0.98"
		High-precision mode [mm inch]		6 0.24" × 6 0.24"
	Minimum display unit			0.1 μm
	Repeatability	Within field of view (2σ)	Wide-field mode	0.5 μm
			High-precision mode	0.1 μm
	Measurement accuracy		Wide-field mode	1.8 µm^*1
			High-precision mode	0.7 µm^*2
Laser height	Reference distance			15 mm 0.59"
	Repeatability			σ ≦ 0.45 µm
	Spot diameter			ø10 µm
	Linearity			±0.35 μm^*3
	Laser class			Class 1
Touch probe	Repeatability			±1 μm
	Measuring force			0.015 N^*4
AF height	Repeatability			±2 μm
Illumination system	Transparent			Green LED, telecentric transparent illumination
	Coaxial			Color LED, white LED, four-division multi-angle illumination (electric)
				Green LED, slit ring (directivity) lateral illumination (electric)
				White LED, telecentric coaxial illumination
Environmental resistance	Ambient temperature			+10 to 35°C +50°F to 95°F
Weight				11 kg 24.25 lb
^1 In the range of 20 × 20 mm 0.79" × 0.79", within the operating ambient temperature range of +23±1°C +73.4±1.8°F at the focal point position. ^2 In the range of 5 × 5 mm 0.20" × 0.20", within the operating ambient temperature range of +23±1°C +73.4±1.8°F at the focal point position. ^3 Value measured with KEYENCE reference workpiece, laser stand-alone performance. ^4 Reference value

Keyence SJ-FB01 Keyence

$0.00

Sold Out

Specifications

Model		SJ-FB01
Ion balance measurement	Measurement range	±50 V
	Measurement accuracy	±0.5 V ^*1
	Minimum display unit	0.1 V
	Sampling cycle	0.1 s
	Installation distance	50 mm 1.97" or more from SJ-F700
Temperature measurement	Measurement range	0 to +50°C 32 to 122°F
	Measurement accuracy	±2°C ±3.6°F ^*2
	Minimum display unit	0.1°C 32.18°F
	Sampling cycle	0.5 s
Humidity measurement	Measurement range	10 to 85% RH
	Measurement accuracy	±5% RH ^*2
	Minimum display unit	1% RH
	Sampling cycle	0.5 s
Environmental resistance	Ambient temperature	0 to +50°C 32 to +122°F
	Relative humidity	10 to 85% RH (no condensation)
Material		Case: PBT Ion-sensing plate: SUS Display sheet: PET Cable jacket: PVC Connector resin: Polyester elastomer Connector metal: Brass (nickel plated)
Weight		Approx. 30 g 1.05 oz
^1 At ±15 V or less; ±10% (indicated) for other ranges ^2 At 25°C 77°F with a relative humidity of 50%

Keyence OP-88516 Keyence

$0.00

Sold Out

Specifications

Model				OP-88516
Length				5 m 16.4'

Keyence OP-87889 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-N60AR Keyence

$1,689.03

Only 8 units left

Specifications

Model				KV-N60AR
General specifications	Power voltage			100 to 240 VAC (+10%/-15%)
	Operating ambient temperature			0 to 55°C 32 to 131°F (no freezing)^1 ^2
	Operating ambient humidity			5 to 95% RH (no condensation)^*1
	Operating environment			As little dust and corrosive gas as possible
	Noise immunity			1500 V peak-to-peak or more, pulse duration 1 μs, 50 ns (based on noise simulator), IEC standard compliant (IEC61000-4-2/3/4/6)
	Withstand voltage			1500 VAC for 1 minute, between power supply terminal and I/O terminals and between all external terminals and case
	Insulation resistance			50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, and between all external terminals and case)
	Output power supply voltage			24 VDC (±10%; output capacity: 0.6 A)
	Storage temperature			−25 to +75°C −13 to +167°F
	Vibration resistance	Intermittent vibration	Frequency: 5 to 9 Hz	Amplitude: 3.5 mm 0.14"^3^4
			Frequency: 9 to 150 Hz	Acceleration: 9.8 m/s² 32.2'/s²^3^4
		Continuous vibration	Frequency: 5 to 9 Hz	Amplitude: 1.75 mm 0.07"^3^4
			Frequency: 9 to 150 Hz	Acceleration: 4.9 m/s² 16.1'/s²^3^4
	Shock resistance			Acceleration: 150 m/s² 492.1'/s², application time: 11 ms, three times in each of the X, Y, and Z directions
	Operating altitude			2000 m 6561.7' or less
	Overvoltage category			AC: II, DC: I
	Pollution degree			2
Performance specifications	Calculation control method			Program storage method
	I/O control method			Refresh method
	Program language			Expanded ladder, KV Script, mnemonic
	Number of instructions			Basic instruction: 81 types and 182 instructions, Application instruction: 39 types and 56 instructions, Calculation instruction: 123 types and 311 instructions, Expansion instruction: 92 types and 141 instructions, Total: 335 types and 690 instructions
	Instruction execution speed			Basic instruction: 50 ns minimum, Application instruction: 170 ns minimum
	Program capacity			16k steps
	Maximum number of attachable I/O units			8
	Maximum number of I/O points			256 (excluding the base unit I/O)
	Input relay/Output relay/Internal auxiliary relay	R		Total of 9600 points 1 bit (R000 to R59915)
	Link relay	B		8192 points 1 bit (B0 to B1FFF)
	Internal auxiliary relay	MR		9600 points 1 bit (MR000 to MR59915)
	Latch relay	LR		3200 points 1 bit (LR000 to LR19915)
	Control relay	CR		1440 points 1 bit (CR000 to CR8915)
	Timer	T		512 points 32 bit (T0 to T511)
	Counter	C		256 points 32 bit (C0 to C255)
	Data memory	DM		32768 points 16 bit (DM0 to DM32767)
	Link register	W		16384 points 16 bit (W0 to W3FFF)
	Temporary memory	TM		512 points 16 bit (TM0 to TM511)
	High-speed counter	CTH		4 points (CTH0 to CTH3), 32-bit automatic reset counter^5 (Input response: 100 kHz per single phase, 50 kHz per phase difference)^6
	High-speed counter comparator	CTC		8 points (CTC0 to CTC7), 32 bits, two points per high-speed counter
	Index register	Z		12 points 32 bit (Z01 to Z12)
	Control memory	CM		9000 points 16 bit (CM0 to CM8999)
	Base unit I/O			Input: 36 points, output: 24 points, Input common: 1 point, Output common: 8 points
	Number of comments and labels that can be stored in the main unit	Device comment		20000 When a maximum-length ladder program is written with no labels.
		Label		28000 When a maximum-length ladder program is written with no device comments.
	Power off hold function	Program memory		Flash ROM can be rewritten 10000 times
		Device		Nonvolatile RAM^*7
	Self-diagnosis function			CPU error, RAM error, and other problems
Input specifications	Relay number			General input: R000 to R007, R100 to R203 (28 points)^*8, High-speed A-phase and B-phase input: R008 to R015 (4 channels, 8 points in total)
	Input mode			24 VDC input (open collector)
	Maximum input voltage			26.4 VDC
	Rated input voltage			24 VDC (General input: 5.3 mA, High-speed A-phase and B-phase input: 6.5 mA^*9)
	Minimum ON voltage			19 VDC
	Maximum OFF current			1.5 mA
	Common method			General input: All points/1 common (1 terminal), High-speed A-phase and B-phase input: Shared common for all points (shared with general input)
	Circuit delay time			General input (R108 to R203): OFF to ON: Max. 50 µs (Typ. 7 µs), ON to OFF: Max. 150 µs (Typ. 70 µs) High-speed A-phase and B-phase input: OFF to ON: Max. 2 μs (Typ. 1.1 μs), ON to OFF: Max. 2 μs (Typ. 0.3 μs) ^*10
	Input time constant			Normal: 10 ms, When the HSP instruction is used: 10 μs When CR2305 is turned ON: 10 μs to 10 ms, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.^*10
				Input time constant setting 10 µs: Digital filter 1.6 to 2 µs Input time constant setting 20 µs: Digital filter 9 to 12 µs Input time constant setting 110 µs: Digital filter 90 to 93 µs Input time constant setting 500 µs: Digital filter 300 to 400 µs Input time constant setting 1 ms: Digital filter 800 to 900 µs Input time constant setting 2.5 ms: Digital filter 2.3 to 2.4 ms Input time constant setting 5 ms: Digital filter 4.0 to 4.5 ms Input time constant setting 10 ms: Digital filter 9 to 9.5 ms
	Response frequency			(High-speed A-phase and B-phase input) Single phase: 100 kHz, phase difference: 50 kHz, 24 V ±10%, Duty 50%
Output specifications	Relay number			R500 to R607 (24 points)
	Output mode			Relay
	Rated load			250 VAC/30 VDC, 2 A
	Common method			2 to 4 points/1 common
	ON/OFF response time			10 ms or less
	ON resistance			50 mΩ or less
	Minimum applicable load			100 μA/100 mVDC
	Relay life			Electrical: 100000 cycles or more (20 cycles/minute), Mechanical: 20000000 cycles or more
	Relay replacement			Impossible
Built-in serial port	Interface	Communication standard		RS-232C
		Connection		Modular connector
	Transmission specifications RS-232C	Baud rate		1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
		Transmission method		Full duplex
		Data format	Start bit	1 bit
			Data bits	7 bits, 8 bits
			Stop bits	1 bit, 2 bits
		Error detection	Parity	Even, odd, none
		Transmission distance		15 m 49.2'
		Number of transmission units		1
	Indication			SD (green), RD (red)
Internal current consumption				91 VA
Weight				Approx. 820 g
^1 The range guaranteed as a system (excluding items specially noted for the units and cassettes). ^2 The temperature below the unit center (30 mm 1.18") inside a control panel. ^3 These specifications correspond to situations in which the unit is mounted on a DIN rail and in which the unit is mounted on the panel directly. ^4 Conforms to JIS B 3502 and IEC61131-2, Scan times: 10 times (100 minutes) in each of the X, Y, and Z directions ^5 You can also configure the settings so that automatic reset is not used. ^6 Only open collectors are supported. Line drivers are not supported. ^7 You can set the target device by clicking “CPU system setting” and then “Power off holding” in KV STUDIO. ^8 The response time increases for R108 to R203. ^9 Reference value of input current. ^10 The input response time corresponding to the input time constant can be calculated as shown below. (Response time) = (Circuit delay of the input circuit) + (Delay by the digital filter) Example: Maximum response time when the input time constant is set to 500 μs OFF to ON: 30 μs (circuit delay) + 400 μs (digital filter) = 430 μs ON to OFF: 50 μs (circuit delay) + 400 μs (digital filter) = 450 μs

Keyence DX-BS6 Keyence

$0.00

Sold Out

Specifications

Model		DX-BS6
Display	Charging Confirmation LED	2-color LED
Power Source	Type	Dedicated lithium-ion battery pack
	Capacity	6060 mAh
	Charging Time	Approx. 7 hours
Interfaces	Magnet Connector	Supported (Charging and Communication) * Used with DX-UC4, DX-UC4E, DX-UC1UL, DX-UC1M, or OP-88604 (Magnetic charging cable)
	USB	—
	Non-contact Charging
Dimensions		122.3 × 66.1 × 27.2 mm 4.81" × 2.60" × 1.07"
Weight		Approx. 155 g 5.47 oz
Accessory		Hand strap

Keyence LM-XC100L Keyence

$0.00

Sold Out

Specifications

Model				LM-XC100L
Type				Head
Image measurement	Field of view	Wide-field mode [mm inch]		25 0.98" × 25 0.98"
		High-precision mode [mm inch]		6 0.24" × 6 0.24"
	Minimum display unit			0.1 μm
	Repeatability	Within field of view (2σ)	Wide-field mode	0.5 μm
			High-precision mode	0.1 μm
	Measurement accuracy		Wide-field mode	1.8 µm^*1
			High-precision mode	0.7 µm^*2
Laser height	Reference distance			70 mm 2.76"
	Repeatability			σ ≦ 0.6 µm
	Spot diameter			ø50 µm
	Linearity			±2 μm^*3
	Laser class			Class 1
Touch probe	Repeatability			—
	Measuring force
AF height	Repeatability			±2 μm
Illumination system	Transparent			Green LED, telecentric transparent illumination
	Coaxial			Color LED, white LED, four-division multi-angle illumination (electric)
				Green LED, slit ring (directivity) lateral illumination (electric)
				White LED, telecentric coaxial illumination
Environmental resistance	Ambient temperature			+10 to 35°C +50°F to 95°F
Weight				11 kg 24.25 lb
^1 In the range of 20 × 20 mm 0.79" × 0.79", within the operating ambient temperature range of +23±1°C +73.4±1.8°F at the focal point position. ^2 In the range of 5 × 5 mm 0.20" × 0.20", within the operating ambient temperature range of +23±1°C +73.4±1.8°F at the focal point position. ^*3 Value measured with KEYENCE reference workpiece, laser stand-alone performance.

Keyence ER-GL08TPC Keyence

$0.00

Sold Out

Specifications

Model		ER-GL08TPC ^1 ^2
Type		General-purpose all-metal shielded type Screw type M8 Connector (M8 3-pin) PNP output Long-Range
Power supply cable length		― ^*3
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		None
Button	Function	―
Detecting distance		3 mm 0.12" ±10% ^*4
Response frequency		80 Hz ^5 ^6
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*7
Standard detectable object (Iron, t = 1 mm 0.04")		9 × 9 mm 0.35" × 0.35"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*8
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V) ^*9
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*10
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, Mounting screw: SUS303 (M30: SUS304), Case resin: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 20 g 0.71 oz
^1 Supports IO-Link specification v1.1/COM2 (38.4 kbps). ^2 Long-body type. See “Dimensions” for details. ^3 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^4 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^5 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^6 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^7 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^8 Residual voltage is for when a 2 m 6.6' cable is used. ^9 For IO-Linkcompatible devices listed under 1, power consumption is as follows. M8 type: 840 mW or less (35 mA or less at 24 V, 53 mA or less at 16 V) M12 type: 1090 mW or less (46 mA or less at 24 V, 69 mA or less at 16 V) M18, M30 type: 1250 mW or less (53 mA or less at 24 V, 79 mA or less at 16 V) ^*10 The upper limit of the UL temperature rating is +55℃ +131℉.