Machine Vision Systems

Keyence CU-21T Keyence

$1,378.89

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence EX-V05P Keyence

$2,652.04

Only 5 units left

Specifications

Model		EX-V05P^*1
Type		Amplifier Unit PNP
Shape		ø14.5 x 20 mm ø0.57" x 0.79" Cylindrical, threaded
Measuring range		0 to 5 mm 0.20"
Display range		-19,999 to +19,999
Linearity		±0.3% of F.S.
Resolution (No. of averaging measurements: 64)		1 µm
Sampling rate		40,000 samplings max./sec. ^*2
Display speed		20 times/sec.
Display power		7-segment 2-color LED
Over-range alarm		±FFFF is displayed.
Control input		PNP: Applied voltage; 10 to 30 V
Control output	Setting method	Upper/lower 2-level setting x 4 patterns (selectable)
	Signal	PNP open-collector (HIGH, GO and LOW): 100 mA max. (30 V max.)
	Response time	0.075 ms (at maximum speed)
	OFF-delay time	60 ms
Strobe output		PNP: 100 mA max. (30 V max.), Residual voltage: 1 V max. (N.O.)
Alarm output		PNP: 100 mA max. (30 V max.), Residual voltage: 1 V max. (N.C.)
Analog output voltage	Output voltage	±5V
	Impedance	100 Ω
	Response time	0.075 ms (at maximum speed)
Temperature characteristics		0.07% of F.S./°C ^*3
Major functions		FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc.
Rating	Power voltage	24 VDC ±10%, Ripple (P-P): 10% max.
	Current consumption	240 mA max.
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122 °F
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 235 g
^1 The above data was obtained using an iron target (S45C, SS400, t=1 mm 0.04"). When measuring aluminum, copper, or stainless steel targets, refer to the linear characteristics for these materials. ^2 When the digital filter function is used, the sampling rate is 20,000 sampling/sec. ^*3 When the distance between the sensor head and the target is within 50% of the measuring range.

Keyence GL-VA960 Keyence

$0.00

Sold Out

Specifications

Model				GL-VA960
Compatible with GL-V models				GL-VM95F, GL-VM48H, GL-VM24L (both PNP/NPN)
Total length				960 mm 37.80"
Material				Polycarbonate ABS
Weight				100 g

Keyence CB-A07 Keyence

$0.00

Sold Out

Specifications

Model				CB-A07
Length				0.7 m 2.30'
Weight				Approx. 100 g

Keyence MP-F10ADP Keyence

$0.00

Sold Out

Specifications

Model				MP-F10ADP
Type				Auto drain cup
Connection diameter				NPT3/8 (10A)
Material				Polycarbonate

Keyence FS-V22G Keyence

$376.25

Only 3 units left

Buy the Keyence FS-V22G Cable/Accessory - a factory-specified component for Keyence industrial automation systems providing reliable signal, power, or communication connections. The Keyence FS-V22G is a direct replacement for existing installations.

Keyence FU-A40 Keyence

$264.72

Only 8 units left

Specifications

Model		FU-A40^*1
Type		Array thrubeam 40 mm 1.57" type
Optical axis area (Standard detection target) (mm inch)		40 × 0.25 mm1.575" × 0.01"
Fibre unit length		2 m 6.6' ^*2 (Free-cut) ø2.2 mm ø0.09" Spiral parts cannot be cut
Minimum bend radius		R10 mm0.394"
Minimum detectable object		ø2.5 mm ø0.10" opaque object^*3
Tightening torque		0.75 N∙m
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-20 to +50 °C -4 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Material		Case : Die-cast zinc, Detecting surface : PBT, Core fiber : Acrylic, Fiber sheath : Polyethylene
Accessories		Fiber cutter, Mounting screws (M4 X L8, 4 units)
Weight		Approx. 70 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 A 5 m 16.4' type is also available. Contact your nearest KEYENCE sales office. ^*3 The minimum detectable object was determined at the optimal detecting distance and sensitivity setting.

Keyence OP-88355 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CL-S015EX Keyence

$0.00

Sold Out

Specifications

Model				CL-S015EX ^*1
Type				Sensor head (Explosion-proof 15 mm model)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.

Keyence KV-16AT Keyence

$591.02

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-51627 Keyence

$0.00

Sold Out

Specifications

Model				OP-51627
Overview				Front-mounting bracket MS2-H75/H100. This is used when directly fastening the main unit with screws.
Applicable product				MS2-H75/H100
Weight				Approx. 106 g

Keyence OP-88876 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence EM-080A Keyence

$376.50

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-D5R Keyence

$320.37

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LA8 Keyence

$0.00

Sold Out

Specifications

Model				CA-LA8
Focal point				8 mm 0.31"
F-stop range (aperture)				F1.4 to F16
Minimum WD				0.05 m 0.16'
Mount				C-mount
Filter size				M40.5 × P0.5
Compatible image sensor size				2/3"
TV distortion				0.39%
Resolving power				120 cycles/mm at center, 100 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 100 g 3.53 oz

Keyence GL-RA960 Keyence

$0.00

Sold Out

Specifications

Model				GL-RA960
Type				Front Protection Cover
Overview				Plastic cover that is used to protect the detecting surface.
Applicable product				GL-R95F, GL-R48H, GL-R24L
Number included				1 unit
Material				Frame: ABS, Transparent parts: Polycarbonate
Weight				Approx. 90 g

Keyence OP-96436 (R-3) Keyence

$0.00

Sold Out

Specifications

Model				OP-96436
Overview				Compact reflector (R-3) used with polarized retro-reflective photoelectric sensor.
Applicable product				PZ2-61, PZ2-62, PZ-G61, PZ-G62
Number included				1 pcs.
Material				Reflector: Acrylic, Base: ABS

Keyence GL-R64H-R Keyence

$4,196.95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence WM-EX1 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence PJ-F20 Keyence

$2,385.25

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SZ-VB11 Keyence

$1,219.12

Only 4 units left

Specifications

Model				SZ-VB11
Type				Mounting bracket
Applicable product				SZ-V Series
Number included				1
Material				SPCC
Note				Accessories: M4 screw x 2, M5 screw x 6
Weight				Approx. 700 g

Keyence FU-95 Keyence

$168.06

Only 6 units left

Specifications

Model		FU-95
Type		Liquid-level detection fiber unit
Detecting method		Pipe mounting type
No. of beam axes		1 mm0.039"
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø1.0×2
Minimum bend radius		R10 mm0.394"
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Accessories		Binding band × 2, nonslip rubber × 2, spacer × 2, screw × 2, nut × 2, Fiber cutter × 1, Adaptor B × 1
Weight		Approx. 7 g

Keyence OP-89229 Keyence

$0.00

Sold Out

Specifications

Model				OP-89229
Overview				It converts NPN type I/O of the SJ-E/H/Q Series to PNP type. It cannot be used in conjunction with OP-87422.
Note				PNP Conversion Box

Keyence CV-L25 Keyence

$0.00

Sold Out

Specifications

Model				CV-L25
Focal point				25 mm 0.98"
F-stop range (aperture)				F1.6 to F16
Minimum WD				0.2 m 0.7'
Mount				C-mount
Filter size				27.0 mm 1.06" P0.5
Compatible image sensor size				2/3"
TV distortion				-0.6 % (-0.1 %)^*1
Resolving power				100 cycles/mm at center, 40 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50 °C 32 to 122°F, 35 to 80 % RH (No condensation)
Polarizing filter				OP-54029
Protective filter				CA-LF27
Weight				Approx. 58 g
^*1 Indicates specification for compatible image sensor size. Value in parenthesis applies to 1/3" image sensor size.