Machine Vision Systems

$777.29

Only 1 unit left

Specifications

Model		EX-V01P^*1
Type		Amplifier Unit PNP
Shape		ø5.4 x 18 mm ø0.21" x 0.71" Cylindrical
Measuring range		0 to 1 mm 0.04"
Display range		-19,999 to +19,999
Linearity		±0.3% of F.S.
Resolution (No. of averaging measurements: 64)		0.4 μm
Sampling rate		40,000 samplings max./sec. ^*2
Display speed		20 times/sec.
Display power		7-segment 2-color LED
Over-range alarm		±FFFF is displayed.
Control input		PNP: Applied voltage; 10 to 30 V
Control output	Setting method	Upper/lower 2-level setting x 4 patterns (selectable)
	Signal	PNP open-collector (HIGH, GO and LOW): 100 mA max. (30 V max.)
	Response time	0.075 ms (at maximum speed)
	OFF-delay time	60 ms
Strobe output		PNP: 100 mA max. (30 V max.), Residual voltage: 1 V max. (N.O.)
Alarm output		PNP: 100 mA max. (30 V max.), Residual voltage: 1 V max. (N.C.)
Analog output voltage	Output voltage	±5V
	Impedance	100 Ω
	Response time	0.075 ms (at maximum speed)
Temperature characteristics		0.07% of F.S./°C ^*3
Major functions		FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc.
Rating	Power voltage	24 VDC ±10%, Ripple (P-P): 10% max.
	Current consumption	240 mA max.
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122 °F
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 235 g
^1 The above data was obtained using an iron target (S45C, SS400, t=1 mm 0.04"). When measuring aluminum, copper, or stainless steel targets, refer to the linear characteristics for these materials. ^2 When the digital filter function is used, the sampling rate is 20,000 sampling/sec. ^*3 When the distance between the sensor head and the target is within 50% of the measuring range.

Keyence OP-88640 Keyence

$228.27

Only 10 units left

Specifications

Model				OP-88640
Type				Polarizing filter (Color)
Weight				Approx. 4 g

Keyence SJ-ML Keyence

$0.00

Sold Out

Specifications

Model				SJ-ML
Applicable product				SJ-M Series

Keyence BC-H1F Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-CN10L Keyence

$2,232.09

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-84484 Keyence

$7,033.28

Only 4 units left

Buy the Keyence OP-84484 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence OP-84484 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence OP-42342 Keyence

$931.35

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IV4-L6C Keyence

$1,267.30

Only 1 unit left

Specifications

Model		IV4-L6C
Compatible sensor		IV4-600CA
Lights	Illumination	White LED
Power supply		Power supplied via connected sensor
Environmental resistance	Enclosure rating	IP67 ^*1
	Ambient temperature	0 to +50°C 32 to +122°F (no freezing)
	Relative humidity	85% RH or less (no condensation)
Material		Main unit case: Aluminum die-casting. Front cover: Acrylic ^*2
Weight		Approx. 195 g 6.88 oz
^1 Only when attached to applicable sensor. Except when polarizing filters (OP-88644/OP-88645/OP-88646/OP-88647) are installed. ^2 ESD safe, IEC61340-5-1 compliant.

Keyence OP-89152 Keyence

$0.00

Sold Out

Specifications

Model				OP-89152
Type				Sensor head connector, small (×1)
Material				PA66, polycarbonate
Weight				Approx. 5 g 0.18 oz

Keyence GS-M50P Keyence

$240.42

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-81283 Keyence

$402.00

Only 1 unit left

Specifications

Model				OP-81283
Applicable product				DL-RS1A
Length				5 m 16.40'
Note				Connection with external devices that have D-sub 9-pin connectors

Keyence GV-H130L Keyence

$561.15

Only 6 units left

Specifications

Model			GV-H130L
Type			Mid-range
Light source			Visible semiconductor laser, Wavelength: 655 nm
Laser class	FDA (CDRH) Part 1040.10		Class 1^*1 (220 µW)
	IEC 60825-1		Class 1 (220 µW)
	JIS C6802
Detection distance (Amplifier display )			55 to 130 mm 2.17" to 5.12" (750 to 0)^*2)
Possible display range			768 to -98
Standard detection deviation			1 mm 0.04"
Spot diameter			Approx. ø0.3 mm ø0.012" (Detection distance 130 mm 5.12")
Operation status indicators			Control output: Red LED/Laser radiation emission indicator: Green LED/1 spot indicator: Green LED
Environmental resistance	Enclosure rating		IP67
	Operating ambientluminance	Incandescent lamp	5000ℓx
		Sunlight	10000ℓx
	Ambient temperature		-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material			Housing material: PBT, Display: Polyarylate, Metal: SUS304, Lens cover: Glass, Cable: PVC
Weight			Approx. 130 g^*3
^1 The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice. ^2 General guideline for amplifier display values relative to detection distance (when distance display mode is set to normal). ^*3 Including 2 m 6.6' connector cable (3 m 9.8' cable for GV-H1000)

Keyence OP-87587 Keyence

$334.98

Only 1 unit left

Specifications

Model				OP-87587
Cable end				M12 L-shaped type - Loose wires
Length				5 m 16.40'
Material				Covering: PUR, Nut: Nickel plating over zinc die-cast

Keyence CA-DRW13M Keyence

$398.34

Only 5 units left

Specifications

Model				CA-DRW13M
Type				Multi-angle Light (Ring)
LED color				White
Power consumption				19.8 W
Input voltage				12 VDC
Weight				Approx. 260 g

Keyence OP-84260 Keyence

$0.00

Sold Out

Specifications

Model				OP-84260
Type				Space-saving Fittings
Applicable product				SL-VHM
Number included				2 pcs.
Material				SPHC
Note				Holding sensor main body from the side.

Keyence CA-DRB5 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-M021 Keyence

$3,562.62

Only 6 units left

Specifications

Model		SJ-M021
Type		Static Elimination Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Static elimination time		0.5 sec max.^*1
Ion balance		±15 V or less^*2
Supply pressure range		0.001 to 0.5 MPa^*3
Min. air pressure	With SJ-ML	0.02 MPa (20 Nl/min)
	With SJ-MS/ML1	0.03 MPa (20 Nl/min)
	With SJ-MS/ML2	0.02 MPa (20 Nl/min)
	With SJ-MS/ML3	0.08 MPa (50 Nl/min)
	With SJ-MS/ML4
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open collector 100 mA (40 V or less)
	Ion level alarm output
	Condition alarm output
Rating	Power voltage	24 VDC ±10 %
	Current consumption	450 mA or less
Environmental resistance	Ambient temperature	0 to +80 °C 32 to 176 °F^4^5
	Relative humidity	35 to 65 % RH
Weight		Approx. 600 g
^1 At installation distance 50 mm 1.97", air flow 60 Nl/min (ambient temperature 20 to 30 °C 68 to 86 °F, relative humidity 40 to 60 %) ^2 Values obtained at an installation distance of 50 mm 1.97" and air flow rate of 20 Nl/min [ambient operating temperature +20 to +30 °C +68 to +86 °F, ambient operating humidity 40 to 60 % RH] (without nozzle) ^3 Inquire for derating of humidity/pressure in environments exceeding +35 °C 95 °F. Use clean or dry air at a temperature of -20 °C -4 °F or less. Min. air pressure varies by nozzle used. ^4 Use a supplied fluid with a temperature of 40 °C 104 °F or less. ^*5 Only for the pressure cable. Other parts should be used with an ambient temperature of 0 to 40 °C 104 °F.

Keyence OP-84252 Keyence

$0.00

Sold Out

Specifications

Model				OP-84252
Overview				Front protective cover protecting detection side of light curtain.
Applicable product				SL-V72HM, SL-V36LM
Number included				1 pcs.
Length				1,444 mm 56.85"
Material				Translucent plastic: Polycarbonate Black plastic: ABS

Keyence SZ-VU32 Keyence

$7,923.72

Only 3 units left

Specifications

Model				SZ-VU32
Type				Multi-bank type
Weight				Approx. 420 g

Keyence CA-DC20E Keyence

$874.83

Only 9 units left

Specifications

Model		CA-DC20E
Type		Light control expansion unit
Output	Light control method	(1) Constant voltage control method (direct current lighting) (2) Pulse width modulation method (light emitting frequency: 100 kHz) [the controller can be used to switch the setting]
	Intensity range	255-level digital [the controller can be used to switch the setting]
	Connection points	2 CH (LED connector connections and terminal block connections can be made)
	Voltage	12 VDC, 24 VDC [DIP switches can be used to switch the setting]
	Capacity	Max. 40 W (30 W/1 ch maximum)
	Synchronization	FLASH output synchronization, continuous lighting [the controller can be used to switch the setting]
	Response speed	(1) Constant voltage control: less than 10 ms during 12 V output, less than 20 ms during 24 V output (2) Pulse width modulation control: less than 1 ms during 12 or 24 V output
Display	LED display	Lighting knob display: green, orange (128 or higher); error display: red (all lit)
Input voltage		24 VDC ±10%
Rating	Current consumption	3.0 A (12 V output at maximum load)6.5 A (24 V output at maximum load)
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)^*1
Weight		Approx 590 g
^*1 Environment for illumination unit: Ambient temperature of 0 to +40 °C 32 to 104 °F and relative humidity of 35 to 65 % RH (No condensation).