Laser Displacement Sensors

$276.87

Only 9 units left

Specifications

Model		LR-XN10
Type		—
Cable/Connector
Main Unit/Expansion Unit		Expansion Unit
No. of Control Outputs		None^*1
No. of External Inputs		—
Response Time		500 µs^*2/1 ms/3 ms/10 ms/200 ms Selectable
IO-Link		—
Functions	Timer Function	Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot
I/O	Control Output	—
	External Input
Unit Expansion		Up to 8 expansion units possible (including main unit, a total of 9 units connected) However, up to 16-unit expansion is possible when the LR-XN10 is used for expansion with the NU Series.
Protection Circuit		Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection
Number of Interference Prevention Devices		OFF/4 units/8 units selectable^*3
Power supply	Power voltage	16 to 30 VDC^*4 (including 10% ripple (P-P) or less), class 2
	Power consumption	During normal operation: 1060 mW (44 mA or lower at 24 V, 61 mA or lower at 16 V), ECO ON/ALL: 895 mW (37 mA or lower at 24 V, 50 mA or lower at 16 V)
Environmental resistance	Ambient temperature	−20 to +55°C -4°F to 131°F (no freezing)^*5
	Relative humidity	35 to 85% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power Spectral Density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² (50G); 3 times each for X, Y, and Z axes
Case Material		Main Unit and Cover: Polycarbonate
Accessories		Instruction manual
Weight		Approx. 21 g
^1 This counts as 1 output when expanding with multiple units to the FS-MC8N/MC8P and NU Series. ^2 If 500 µs is selected, the following limitations apply. · Only 2-point calibration can be performed. · The detection range masking is set during calibration. (Manual setting of the masking range is not supported.) · Output 2 is limited to an alarm output for errors and gyro issues, and standard/area cannot be used. · The interference prevention function is not supported ^3 Selecting four or eight interference prevention units causes the response time to change as follows: 4 Units selected: 6 ms/18 ms/60 ms/1.2 s selectable; 8 Units selected: 12 ms/36 ms/120 ms/2.4 s selectable. ^4 When expanding the system with 4 or more expansion units, use a power voltage of 20 V or higher. ^*5 Expansion by 1 or 2 units: −20 to +55°C -4°F to 131°F; Expansion by 3 to 10 units: -20 to +50°C -4°F to 122°F, Expansion by 11 to 16 units: -20 to +45°C -4°F to 113°F

Keyence LJ-V7080 Keyence

$740.03

Only 8 units left

Specifications

Model			LJ-V7080
Mounting conditions			Diffuse reflection
Reference distance			80 mm 3.15"
Measurement range	Z-axis (height)		±23 mm 0.91" (F.S.=46 mm 1.81")
	X-axis (width)	NEAR side	25 mm 0.98"
		Reference distance	32 mm 1.26"
		Far side	39 mm 1.54"
Light source	Type		Blue semiconductor laser
	Wavelength		405 nm (visible beam)
	Laser class		Class 2 Laser Product (IEC60825-1, FDA(CDRH) Part 1040.10^*1)
	Output		4.8 mW
Spot size (reference distance)			Approx. 48 mm × 48 µm 1.89" × 0.001890"
Repeatability	Z-axis (height)		0.5 µm 0.000020"^2^3
	X-axis (width)		10 µm 0.000394"^2^4
Linearity	Z-axis (height)		±0.1% of F.S.^*5
Profile data interval	X-axis (width)		50 µm 0.002"
Sampling cycle (trigger interval)			Top speed: 16 µs (high-speed mode), Top speed: 32 µs (advanced function mode)^*6
Temperature characteristics			0.01% of F.S./°C
Environmental resistance	Enclosure rating		IP67 (IEC60529)^*7
	Ambient light		Incandescent lamp: 10,000 lux max.^*8
	Ambient temperature		0 to +45 °C 32 to 113 °F^*9
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance		10 to 57 Hz, Double amplitude 1.5 mm 0.06", 3 hours in each of the X, Y, and Z directions
	Shock resistance		15 G/6 ms
Material			Aluminum
Weight			Approx. 400 g
^1 The laser classification for FDA(CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 This value is from a case in which measurement has been performed with a reference distance with 4,096 times of averaging. ^3 The measurement targets are KEYENCE standard targets. This value is from a case in which the average height of the default setting area has been measured in height mode. All other settings are default. ^4 The measurement target is a pin gauge. This value is from a case in which the position of the intersection between the rounded surface of the pin gauge and the edge level has been measured in position mode. All other settings are default. ^5 The measurement targets are KEYENCE standard targets. The profile data is from a case in which measurement has been performed with 64 times of smoothing and 8 times of averaging. All other settings are default. ^6 For high-speed mode, when the measurement area is at its minimum, binning is ON, image capture mode is set to standard, and parallel image capture is ON. All other settings are default. For advanced function mode, when the measurement area is at its minimum, binning is ON and image capture mode is set to standard. All other settings are default. ^7 This value is from a case in which the sensor head cable (CB-B) or extension cable (CB-BE) has been connected. ^8 This is the illuminance for the light-receiving surface of the sensor head during white paper measurement when light has been shined onto the white paper. ^*9 The sensor head must be mounted on a metal plate for use.

Keyence LB-1201 Keyence

$1,775.76

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LJ-V7300 Keyence

$5,085.67

In stock, 11 units

Specifications

Model			LJ-V7300
Mounting conditions			Diffuse reflection
Reference distance			300 mm 11.81"
Measurement range	Z-axis (height)		±145 mm 5.71" (F.S.=290 mm 11.42")
	X-axis (width)	NEAR side	110 mm 4.33"
		Reference distance	180 mm 7.09"
		Far side	240 mm 9.45"
Light source	Type		Blue semiconductor laser
	Wavelength		405 nm (visible beam)
	Laser class		Class 2 Laser Product (IEC60825-1, FDA(CDRH) Part 1040.10^*1)
	Output		4.8 mW
Spot size (reference distance)			Approx. 240 mm × 610 µm 9.45" × 0.024016"
Repeatability	Z-axis (height)		5 µm 0.000197"^2^3
	X-axis (width)		60 µm 0.002363"^2^4
Linearity	Z-axis (height)		±0.05 to ±0.15% of F.S.^5^6
Profile data interval	X-axis (width)		300 µm 0.012"
Sampling cycle (trigger interval)			Top speed: 16 µs (high-speed mode), Top speed: 32 µs (advanced function mode)^*7
Temperature characteristics			0.01% of F.S./°C
Environmental resistance	Enclosure rating		IP67 (IEC60529)^*8
	Ambient light		Incandescent lamp: 10,000 lux max.^*9
	Ambient temperature		0 to +45 °C 32 to 113 °F^*10
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance		10 to 57 Hz, Double amplitude 1.5 mm 0.06", 3 hours in each of the X, Y, and Z directions
	Shock resistance		15 G/6 ms
Material			Aluminum
Weight			Approx. 1,000 g
^1 The laser classification for FDA(CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 This value is from a case in which measurement has been performed with a reference distance with 4,096 times of averaging. ^3 The measurement targets are KEYENCE standard targets. This value is from a case in which the average height of the default setting area has been measured in height mode. All other settings are default. ^4 The measurement target is a pin gauge. This value is from a case in which the position of the intersection between the rounded surface of the pin gauge and the edge level has been measured in position mode. All other settings are default. ^5 The measurement targets are KEYENCE standard targets. The profile data is from a case in which measurement has been performed with 64 times of smoothing and 8 times of averaging. All other settings are default. ^6 The linearity will differ depending on the measurement area. ^7 For high-speed mode, when the measurement area is at its minimum, binning is ON, image capture mode is set to standard, and parallel image capture is ON. All other settings are default. For advanced function mode, when the measurement area is at its minimum, binning is ON and image capture mode is set to standard. All other settings are default. ^8 This value is from a case in which the sensor head cable (CB-B) or extension cable (CB-BE) has been connected. ^9 This is the illuminance for the light-receiving surface of the sensor head during white paper measurement when light has been shined onto the white paper. ^10 The sensor head must be mounted on a metal plate for use.

Keyence LK-2111 Keyence

$4,792.49

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LK-G3001P Keyence

$1,364.32

In stock, 54 units

Specifications

Model			LK-G3001P^*1
Type			Separate monitor model^*2
Display	Head compatibility		All LK-G sensor heads are compatible
	Number of connectable sensors		Maximum of 2 units
	Minimum display unit		0.01 µm
	Display range		±9,999.99 mm to ±9,999.99 µm (Selectable from six levels)
	Refresh rate		10 times/sec
Terminal block	Analog voltage output		±10 V x 2 outputs, output impedance: 100 Ω
	Analog current output		4 to 20 mA x 2 outputs, maximum load resistance: 350 Ω
	Timing input		For OUT1, voltage input
	Reset input
	Auto-zero input
	Laser remote interlock input		Non-voltage input
	Comparator output		For OUT1, PNP open-collector output
	Alarm output		For OUT1, PNP open-collector output (N.C.)
Expansion connector	Timing input		For OUT2, voltage input
	Reset input
	Auto-zero input
	Program switching input		Voltage input x 3 inputs
	Laser-Off input		For Head A/Head B, voltage input
	Comparator output		For OUT2, PNP open-collector output
	Alarm output		For OUT2, PNP open-collector output (N.C.)
	Binary	Binary output	Measured data output (21 bits), OUT1/OUT2 selectable, PNP open-collector output
		Strobe output	PNP open-collector output
		Binary selector output
		Binary selector input	Voltage input
RS-232C interface			Measured data output and control input/output (Maximum baud rate: 115,200 bps, selectable)
USB interface			In conformity with USB Revision 2.0 Full speed (USB1.1 compatible)
Major functions			2 OUT simultaneous measurement, Operation, Averaging, Filter, Calibration, Measurement, AUTO ZERO, Sampling frequency setting, Mutual interference prevention, Data storage, 8-program memory, ECO mode, ABLE setting, Target setting, ABLE tuning, Selection of measurement surface of transparent target, Statistics processing, Connection of setting support software, Selectable head-mounting, etc.
Rating	Power voltage		24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption		500 mA or less with 1 head/600 mA or less with 2 heads
Environmental resistance	Ambient temperature		0 to +50 °C 32 to 122 °F
	Relative humidity		35 to 85 % RH (No condensation)
Weight			Approx. 370 g
^1 The rating of the PNP open collector: 50 mA max. (30 V max.), residual voltage of 1 V max. The rating of voltage input: 10.2 V or more ON voltage (26.4 V max.) 0.6 mA or less OFF current. ^2 LK-G3001P can be operated singly. The measured value display and setting modifications can be performed on the display panel (LK-GD500) or via the setting support software (LK-H1W).

Keyence LK-G3000V Keyence

$1,613.59

Only 5 units left

Buy the Keyence LK-G3000V - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence LK-G3000V is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence LJ-G080 Keyence

$967.65

In stock, 15 units

Specifications

Model			LJ-G080
Mounting			Diffuse reflective
Reference distance			80 mm 3.15"
Measuring range	Z-axis (Height)		±23 mm ±0.91"
	X-axis (Width)	Near	25 mm 0.98"
		Reference distance	32 mm 1.26"
		Far	39 mm 1.54"
Light source	Type		Red semiconductor laser
	Wavelength		655nm (Visible light), Class 2 laser product (JIS C6802)
	Output		0.95 mW
	Laser Class		Class II Laser Product (FDA (CDRH) 21CFR PART1040.10), Class 2 Laser Product (IEC 60825-1)
Spot shape (at reference distance)			Approx 80 µm x 46 mm 0.003150" x 1.81"
Repeatability	Z-axis (Height)		1 µm 0.000040"^*1
	X-axis (Width)		10 µm 0.000394"^*2
Linearity Z-axis (Height)			±0.1% of F.S.^*3
Sampling cycle (trigger interval)			3.8 ms^*4
Temperature characteristics			0.02% of F.S./°C
Environmental resistance	Enclosure rating		IP67 (IEC60529)
	Ambient light		Incandescent lamp or fluorescent lamp: 5,000 lux max.^*5
	Ambient temperature		0 to +50 °C 32 to 122 °F
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material			Aluminum
Weight			Approx. 350 g
^1 The value obtained after 64 times averaging at the reference distance.The target is KEYENCE standard object. The value is the average of the widths in the Height mode. ^2 The value obtained after 64 times averaging at the reference distance.The target is ø10 mm ø0.39" pin gauge. The value is the edge in the Position mode after 16 times of the Smoothing. ^3 The target is KEYENCE standard object. The value is the average of the widths in the Height mode. ^4 With initial setting, minimum measuring range, and single smoothing processing ^*5 The illumination on the receiver of the sensor head when targeting an illuminated white paper.

Keyence LR-ZB250AN Keyence

$257.51

Only 8 units left

Specifications

Model		LR-ZB250AN
Type		Distance based laser sensor
Appearance		Rectangular
Output		NPN
Cable connection		2 m cable
Detectable distance		35 to 250 mm 1.38" to 9.84" (215 to 0)^*1
Standard detectable deviation		35 to 180 mm 1.38" to 7.09": 9 mm 0.35" 180 to 250 mm 7.09" to 9.84": 25 mm 0.98"
Display resolution		1 to 3 (1 to 3 mm 0.04" to 0.12")
Spot size		Approx. 2.4 × 1.2 mm 0.09" × 0.05" at 250 mm 9.84"
Response time		1.5 ms / 10 ms / 50 ms selectable
Light source	Type	Red laser (660 nm)
	Laser class	Class 1 laser product (IEC60825-1, FDA (CDRH) Part1040.10^*2)
Function	Indicator	3-digit 7-segment display (red), output indicator (yellow), DATUM indicator (orange), 1 spot indicator (green)
	Timer	OFF/ON delay/OFF delay/One-shot
Specifications	Power voltage	10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
	Power consumption	450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)
	Control output	NPN Open collector, Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mA
	Protection circuit	Protection against reverse power connection, output overcurrent, output surge, reverse output connection
	Output operation	Light-ON / Dark-ON selectable
	External input	Input time calibration: 35 ms or more ON, 35 ms or more OFF Laser emission stop: 2 ms or more ON, 20 ms or more OFF Short-circuit current NPN: 1 mA or less/PNP: 2 mA or less
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB^3, Diversey^3
	Insulation resistance	20 MΩ or more (500 VDC)
	Ambient light	Incandescent lamp: 2,000 lux or less Sunlight: 4,000 lux or less^*4
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F (No freezing)
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKM
Accompanying items		Instruction Manual, Certification/Identification label (FDA)
Weight		Approx. 110 g (Including cable)
^1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed. ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 Have passed resistance tests with cleaning agents from multiple manufactures. ^4 When the response time is 10 ms

Keyence LR-ZH500CN Keyence

$402.26

Only 10 units left

Specifications

Model		LR-ZH500CN
Type		U.C.D. Function Distance based laser sensor
Appearance		Rectangular
Output		NPN
Cable connection		M8 connector, 4-pin
Detectable distance		35 to 500 mm 1.38" to 19.69"(465 to 0)^*1
Standard detectable deviation		35 to 180 mm 1.38" to 7.09": 9 mm 0.35" 180 to 300 mm 7.09" to 11.81": 25 mm 0.98" 300 to 400 mm 11.81" to 15.75": 40 mm 1.57" 400 to 500 mm 15.75" to 19.69": 50 mm 1.97"
Display resolution		1 to 5 (1 to 5 mm 0.04" to 0.20")
Spot size		Approx. ø3 mm ø0.12"
Response time		1.5 ms / 10 ms / 50 ms selectable
Light source	Type	Red laser (660 nm)
	Laser class	Class 2 laser product (IEC60825-1) Class II Laser product (FDA(CDRH) Part1040.10)
Function	Indicator	3-digit 7-segment display (white), output indicator (yellow), DATUM indicator (orange), 1 spot indicator (green)
	Timer	OFF/ON delay/OFF delay/One-shot
Specifications	Power voltage	10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
	Power consumption	450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)
	Control output	NPN Open collector, Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mA
	Protection circuit	Protection against reverse power connection, output overcurrent, output surge, reverse output connection
	Output operation	Light-ON / Dark-ON selectable
	External input	Input time calibration: 35 ms or more ON, 35 ms or more OFF Laser emission stop: 2 ms or more ON, 20 ms or more OFF Short-circuit current NPN: 1 mA or less/PNP: 2 mA or less
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB^2, Diversey^2
	Insulation resistance	20 MΩ or more (500 VDC)
	Ambient light	Incandescent lamp: 10,000 lux or less Sunlight: 20,000 lux or less at 250 mm 9.84"^3 Incandescent lamp: 2,000 lux or less Sunlight: 4,000 lux or less at 500 mm 19.69"^3
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F (No freezing)
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKM
Accompanying items		Instruction Manual, FDA warning/certification/identification label, Laser warning/explanation labels
Weight		Approx. 55 g
^1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed. ^2 Have passed resistance tests with cleaning agents from multiple manufactures. ^*3 When the response time is 10 ms

Keyence LB-1101W Keyence

$704.40

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LK-H027K Keyence

$2,507.38

Only 8 units left

Specifications

Model		LK-H027K
Mounting mode		Specular reflective
Reference distance		16.1mm0.634"
Measuring range		±2.8 mm ±0.11"^*1
Light source	Type	Red semiconductor laser
	Wavelength	655nm
	Laser class	IEC 60825-1: Class 2 FDA(CDRH)21CFR Part 1040.10: Class II
	Output	0.95mW
Spot diameter (at standard distance)		25 µm x 1,400 µm
Linearity		±0.02% of F.S. (F.S.= 6 mm 0.24")^*2
Repeatability		0.02 µm (0.01 µm)^*3
Sampling cycle		2.55/5/10/20/50/100/200/500/1000 µs (9 steps selectable)
Temperature characteristics		0.01% of F.S./°C (F.S.= 6 mm 0.24")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 230 g
^1 Measurement range when the sampling cycle is 20 µs or more. ^2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode. ^*3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical e x ample of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 µs.

Keyence LJ-X8000E Keyence

$9,070.49

Only 4 units left

Specifications

Model		LJ-X8000E^*1
Head input		Up to 2 head units Compatible with LJ-X8000 Series heads and LJ-V7000 Series heads *When using 2 units, heads A and B are the same model.
Sampling cycle (trigger interval)		[2D mode] Maximum speed of 1 kHz (1 ms) ^*2 [3D mode] -
Number of registered inspection settings		Up to 1000 (depending on SD card capacity and setting contents) for each of SD cards 1 and 2. External switching is possible
Master profile / number of reference images		Maximum 200 per setting per head (depends on SD card capacity)
Memory card		• SD card slot × 2 • Supports OP-87133 (512 MB), CA-SD1G (1 GB), CA-SD4G (4 GB), CA-SD16G (16 GB) *In the SD1 slot, CA-SD4G is equipped as standard for 8000, and CA-SD1G is equipped as standard for 8000E
Number of tools		100/setting (of those, 20 are for misalignment correction)
Interface	Control input	20 points (input terminal block: 5 points, parallel I/O: 15 points)
	Control output	28 points (output terminal block: 6 points, parallel I/O: 22 points) Photo MOSFET^*3
	RS-232C	• Value output and control I/O (exclusive use with PLC link using an RS-232C port) • Supports baud rates up to 230,400 bps
	PLC link	• Value output using Ethernet port or RS-232C port, and control I/O (Exclusive use with EtherNet/IP™ and PROFINET. When using an RS-232C port, exclusive use with RS-232C no-procedure communication)
	Ethernet	• Value output and control I/O • In addition to the above functions, can upload/download inspection settings, perform various simulations, send/receive various data including profile and image data, and be used with remote connection programs via KEYENCE PC application software • Supports FTP client and FTP server functions • Supports VNC server functions (for non-PC clients, only displaying the monitor screen is supported) • Supports BOOTP functions • 1000BASE-T/100BASE-TX/10BASE-T • Supports jumbo frames (when connected to any of CB-NEC20E/NEP20E/NPN20E)
	USB	• Can output values (3D mode only), upload/download inspection settings, perform various simulations, send/receive various data including profile and image data, and be used with remote connection programs via KEYENCE PC application software • Dedicated USB 2.0
	EtherNet/IP™	• Can input/output numerical values and perform control I/O using the Ethernet port or the optional EtherNet/IP™ unit CB-NEP20E (Cannot be used with PLC Link, PROFINET, and EtherCAT®) • Supports cyclic communication (max. 1436 bytes) and message communication • Maximum number of connections: 32 (Ethernet port)/1: Exclusive Owner, 4: Input Only (CB-NEP20E) • Complies with Version.CT15 (Ethernet port)/CT17 (CB-NEP20E) conformance test
	PROFINET	• Can input/output numerical values and perform control I/O using the Ethernet port or the optional PROFINET unit CB-NPN20EA (Cannot be used with PLC Link, EtherNet/IP, and EtherCAT®) • Supports cyclic communication (max. 1408 bytes) (Ethernet port) / 1252 bytes (CB-NPN20EA) • Supports acyclic communication (recorded data) • Complies with Conformance Class A (Ethernet port) / C (CB-NPN20EA)
	EtherCAT^®	• Can output numerical values and perform control I/O by connecting the optional EtherCAT® unit CB-NEC20E (Cannot be used with PLC link, EtherNet/IP™, and PROFINET) • Supports cyclic communication (process data object communication) (Input: Max. 536 bytes/Output: Max. 532 bytes) • Supports acyclic communication (mailbox communication) • Supports CoE • Explicit Device Identification • Complies with V2.2.10 and V2.2.1.0 conformance test
	Mouse	Various menus can be controlled via the dedicated mouse (included with the controller)
	SNTP	Automatic correction of date and time for this unit is possible by connecting to an SNTP server
	USB HDD	By connecting an HDD (max. 2 TB) to the dedicated USB port (supports USB 3.0, bus-powered, rated output: 900 mA), profile, image and other data can be output
	Monitor output	Analog RGB output, XGA 1024 × 768 (24-bit color, 60 Hz)
Encoder input		1 port: combination RS-422 line-driver output (with 5 V output: maximum 150 mA) open collector output (compatible with 5 V, 12 V, 24 V)
Response frequency	RS-422	Single phase / Z phase: 1.6 MHz, 2 phase / 1x: 1.6 MHz, 2 phase / 2x: 3.2 MHz, 2 phase / 4x: 6.4 MHz
	Open collector (OC)	Single phase / Z phase: 100 kHz, 2 phase / 1x: 100 kHz, 2 phase / 2x: 200 kHz, 2 phase / 4x: 400 kHz
Laser ON input		Non-voltage input (Shorted with short pin when shipped from factory)
Cooling fan		Provided
Minimum display unit		0.1 µm 0.000004", 0.01°, 0.00001 mm²
Language		Switchable between English, Japanese, Simplified Chinese, Traditional Chinese, Korean, German, French, Italian, Thai, Czech, Hungarian, and Polish
Ratings	Power voltage	24 V DC ±10%
	Maximum current consumption	3.3 A
Environmental resistance	Ambient temperature	0 to +45°C 32 to +113°F (DIN rail mounting) / 0 to +40°C 32 to +104°F (base surface mounting)
	Relative humidity	85% RH or less (no condensation)
Weight		Approx. 2500 g
^1 3D mode cannot be used with the LJ-X8000E. ^2 When the measurement range is narrowed in accordance with the binning settings. ^*3 Positive common connection is supported for NPN input devices, and negative common connection for PNP input devices.

Keyence LR-XH50 Keyence

$498.77

In stock, 11 units

Specifications

Model		LR-XH50
Type		Cable Length: 2 m 6.6'
Detecting Distance		25.0 to 50.0 mm 0.98" to 1.97"
Standard Detectable Deviation		0.5 mm 0.02"
Display Resolution		0.1 mm 0.004"
Spot Size		Approx. 0.2 mm × 1.5 mm 0.008" × 0.06" (at a detecting distance of 50 mm 1.97")
Light Source	Type	Green laser (505 nm)
	Laser Class	Class 1 laser product (IEC60825-1, FDA (CDRH), Part1040.10^*1)
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient light	Incandescent lamp: 16,000 lux or less, Sunlight: 16000 lux or less
	Ambient temperature	-10°C to +50°C 14°F to 122°F (no freezing)
	Relative humidity	35 to 85% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power Spectral Density: 0.816 G²/Hz for X, Y and Z axes
	Shock resistance	1000 m/s² (100G); 6 times each for X, Y, and Z axes
Material		Case: SUS316L; Lens Cover: PSU; Gasket: FKM (lens cover), EVM (cable)
Accessories		Laser warning label
Weight		approx. 75 g
^*1 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice.

Keyence LK-GC10 Keyence

$654.42

Only 8 units left

Specifications

Model				LK-GC10
Cable length				10 m 32.8'
Weight				Approx. 750 g (including the cable)

Keyence LK-031 Keyence

$2,315.07

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LR-X250 Keyence

$450.51

In stock, 12 units

Specifications

Model		LR-X250
Type		Cable Type
Detecting Distance		30 to 250 mm 1.18" to 9.84"
Standard Detectable Deviation		30 to 180 mm: 9 mm 1.18" to 7.09": 0.35" 180 to 250 mm: 18 mm 7.09" to 9.84": 0.71"
Display Resolution		1 to 2 mm 0.04" to 0.08"
Spot Size		Approx. 0.8 mm × 1.2 mm 0.03" × 0.05" (at a detecting distance of 250 mm 9.84")
Response Time		500 µs^*1/1 ms/3 ms/10 ms/200 ms Selectable
Light Source	Type	Green laser (505 nm)
	Laser Class	Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10^*2)
IO-Link		Specification v1.1/COM2 (38.4 kbps)
Functions	Timer Function	Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot
I/O	Control Output	NPN open collector/PNP open collector, N.O./N.C selectable.　　^*3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower
	External Input	External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable　　^*3 Short circuit current - NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only)
Protection Circuit		Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection
Power supply	Power voltage	16 to 30 VDC (including 10% ripple (P-P) or less), class 2
	Power consumption	During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current)
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient light	Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less
	Ambient temperature	-10°C to +50°C 14°F to + 122°F (no freezing)
	Relative humidity	35 to 85% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power Spectral Density: 0.816 G²/Hz for X, Y and Z axes
	Shock resistance	1000 m/s² (100G) 6 times each for X, Y, and Z axes
Material		Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM
Accessories		Instruction manual, laser warning label
Weight		Approx. 90 g
^1 If 500 µs is selected, the following limitations apply. · Only 2-point calibration can be performed. · The detection range masking is set during calibration. (Manual setting of the masking range is not supported.) · Output 2 is limited to an alarm output for errors and gyro issues, and standard/area cannot be used. ^2 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice. ^*3 The I/O can be selected from the following combinations. Control output × 2, Control output + External input

Keyence LK-2100 Keyence

$3,938.92

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LR-X100C Keyence

$522.89

In stock, 11 units

Specifications

Model		LR-X100C
Type		M8 Connector Type^*1
Detecting Distance		25.0 to 100.0 mm 0.98" to 3.94"
Standard Detectable Deviation		1.0 mm 0.04"
Display Resolution		0.1 mm 0.004"
Spot Size		Approx. 0.3 mm × 2 mm 0.012" × 0.08" (at a detecting distance of 100 mm 3.94")
Response Time		500 µs^*2/1 ms/3 ms/10 ms/200 ms Selectable
Light Source	Type	Green laser (505 nm)
	Laser Class	Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10^*3)
IO-Link		Specification v1.1/COM2 (38.4 kbps)
Functions	Timer Function	Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot
I/O	Control Output	NPN open collector/PNP open collector, N.O./N.C selectable.　　^*4 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower
	External Input	External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable　　^*4 Short circuit current - NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only)
Protection Circuit		Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection
Power supply	Power voltage	16 to 30 VDC (including 10% ripple (P-P) or less), class 2
	Power consumption	During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current)
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient light	Incandescent lamp: 16000 lux or less Sunlight: 16000 lux or less
	Ambient temperature	-10°C to +50°C 14°F to + 122°F (no freezing)
	Relative humidity	35 to 85% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power Spectral Density: 0.816 G²/Hz for X, Y and Z axes
	Shock resistance	1000 m/s² (100G) 6 times each for X, Y, and Z axes
Material		Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM Amplifier M8 Connector: SUS303
Accessories		Instruction manual, laser warning label
Weight		Approx. 35 g
^1 Ensure the cable length is 30 m 98.4' or less for the M8 connector type. Ensure the cable length is 20 m 65.6' or less when connecting via IO-Link. ^2 If 500 µs is selected, the following limitations apply. · Only 2-point calibration can be performed. · The detection range masking is set during calibration. (Manual setting of the masking range is not supported.) · Output 2 is limited to an alarm output for errors and gyro issues, and standard/area cannot be used. ^3 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice. ^4 The I/O can be selected from the following combinations. Control output × 2, Control output + External input

Keyence LK-G10 Keyence

$1,017.21

In stock, 47 units

Specifications

Model		LK-G10
Reference distance		10 mm 0.39"
Measuring range		±1 mm ±0.04"^1^2
Light source	Type	Red semiconductor laser
	Wavelength	655 nm (visible light)
	Laser Class	Class II (FDA CDRH 21CFR PART1040.10)
	Output	0.3 mW
Spot diameter (at reference distance)		Approx. ø20 µm ø0.0008"
Linearity		±0.03 % of F.S. (F.S.= ±1 mm ±0.04")^*3
Repeatability		0.02 µm (0.01 µm)^*4
Sampling frequency		20 / 50 / 100 / 200 / 500 / 1,000 µs (Selectable from 6 levels)
LED display		Near the center of the measurement: Green lights Within the measurement area: Orange lights Outside the measurement area: Orange flashing
Temperature characteristics		0.01 % of F.S./°C (F.S.= ±1 mm ±0.04")
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient light	Incandescent lamp or Fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 190 g (including the cable)
^1 The range is obtained by measuring KEYENCE's standard target (ceramic). ^2 When the sampling rate is 20 µs, the range becomes +0.37 mm +0.01" (FAR side) to -1 mm -0.04" (NEAR side). ^3 The range is obtained by measuring KEYENCE's standard target (ceramic) with the Standard mode. ^4 The range is obtained by measuring KEYENCE's standard (SUS) with 4,096 times of averaging at the reference distance. The range in parenthesis is the typical linearity obtained by measuring the target with 16, 384.

Keyence LJ-S320 Keyence

$0.00

Sold Out

Specifications

Model			LJ-S320
Reference distance			470.5 mm 18.52"^*1
Measurement range	Z-axis (height)		+100/−120 mm +3.94"/−4.72" (F.S.=220 mm 8.66")
	X-axis (width)	NEAR side	243 mm 9.57"
		Reference distance	295 mm 11.61"
		FAR side	320 mm 12.60"
	Y-axis	Reference distance
XY data interval			100 μm 0.0039"
Number of XY data points			3200×3200
Light source	Laser light source		405 nm (visible light) wavelength blue semiconductor laser
	Laser class		Class 2M laser product^2 (IEC 60825-1, FDA (CDRH) Part 1040.10^3)
	Output		10 mW
Repeatability	Z-axis (height)		5 μm 0.000197"^*4
	XY (distance)		10 μm 0.0004"^*5
Linearity	Standard area		±0.027% of F.S.^*6
	High-accuracy area		—
Imaging time			Min. 0.3 sec ^*7
I/F	Ethernet		1000BASE-T, 100BASE-TX
	Input		LASER_ON, TRG, MEM_CLEAR ^*8
	Output		READY, EXPOSURE_BUSY, ERROR ^*8
Ratings	Power voltage		24 VDC +25%, -20%
	Current consumption / Power		Max. 5.5 A (at 19.2 V), 4.4 A (at 24 V)^*9 / Typ. 17 W
Environmental resistance	Enclosure rating		IP65 (IEC60529) ^*10
	Ambient light		Incandescent lamp: 10000 lux or less ^*11
	Ambient temperature		0 to +45°C 32.0°F to +113.0°F ^*12
	Relative humidity		85% RH or below (no condensation)
	Vibration resistance		10 to 500 Hz; Power spectral density: 0.033 G2/Hz; X, Y, and Z directions (IEC 60068-2-64)
	Shock resistance		15 G (IEC 60068-2-27)
Material			Aluminum
Weight			Approx. 3700 g 8.16 lb
^1 The reference distance is the distance from the bottom edge of the head to the measurement center of the Z-axis (height). See the Dimensions section for the installation reference plane. ^2 Do not view the beam directly using optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Observing the laser output using optical instruments is dangerous and may damage the eyes. ^3 Laser classification performed based on IEC60825-1 in accordance with FDA (CDRH) Laser Notice. ^4 The measured target is a KEYENCE standard target. Sigma value when the average height of 200 × 200 points in the center of the field of view is measured using the height tool with reciprocating imaging OFF. ^5 The measured target is a KEYENCE standard target. Sigma value when the distance between two circles of 500 points in diameter set 1000 points apart at the center of the field of view on a grayscale image is measured using the circle and circle distance tool with reciprocating imaging OFF. ^6 The measured target is a KEYENCE standard target. Value when the average height of 200 × 200 points is measured using the height tool with reciprocating imaging OFF. See the Dimensions section for the high-accuracy area reference plane. ^7 With YZ range minimum and Y skipping maximum. ^8 Laser ON input is enabled only when connected to a controller. ^9 The maximum value may be exceeded when extreme acceleration is applied. ^10 With an OP cable connected. ^11 When measuring white paper, illuminance on the sensor head receiving surface when light is applied to white paper. ^12 The head needs to be mounted to a metal plate to be used.

Keyence LR-ZB250CN Keyence

$366.08

Only 10 units left

Specifications

Model		LR-ZB250CN
Type		Distance based laser sensor
Appearance		Rectangular
Output		NPN
Cable connection		M8 connector, 4-pin
Detectable distance		35 to 250 mm 1.38" to 9.84" (215 to 0)^*1
Standard detectable deviation		35 to 180 mm 1.38" to 7.09": 9 mm 0.35" 180 to 250 mm 7.09" to 9.84": 25 mm 0.98"
Display resolution		1 to 3 (1 to 3 mm 0.04" to 0.12")
Spot size		Approx. 2.4 × 1.2 mm 0.09" × 0.05" at 250 mm 9.84"
Response time		1.5 ms / 10 ms / 50 ms selectable
Light source	Type	Red laser (660 nm)
	Laser class	Class 1 laser product (IEC60825-1, FDA (CDRH) Part1040.10^*2)
Function	Indicator	3-digit 7-segment display (red), output indicator (yellow), DATUM indicator (orange), 1 spot indicator (green)
	Timer	OFF/ON delay/OFF delay/One-shot
Specifications	Power voltage	10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
	Power consumption	450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)
	Control output	NPN Open collector, Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mA
	Protection circuit	Protection against reverse power connection, output overcurrent, output surge, reverse output connection
	Output operation	Light-ON / Dark-ON selectable
	External input	Input time calibration: 35 ms or more ON, 35 ms or more OFF Laser emission stop: 2 ms or more ON, 20 ms or more OFF Short-circuit current NPN: 1 mA or less/PNP: 2 mA or less
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB^3, Diversey^3
	Insulation resistance	20 MΩ or more (500 VDC)
	Ambient light	Incandescent lamp: 2,000 lux or less Sunlight: 4,000 lux or less^*4
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F (No freezing)
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKM
Accompanying items		Instruction Manual, Certification/Identification label (FDA)
Weight		Approx. 55 g
^1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed. ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 Have passed resistance tests with cleaning agents from multiple manufactures. ^4 When the response time is 10 ms

Keyence LK-G3001V Keyence

$1,237.31

In stock, 49 units

Specifications

Model			LK-G3001V^*1
Separate type			LK-G3001/LK-GD500^*2
Type			All-in-one model
Display	Head compatibility		All LK-G sensor heads are compatible
	Number of connectable sensors		Maximum of 2 units
	Minimum display unit		0.01 µm
	Display range		±9,999.99 mm to ±9,999.99 µm (Selectable from six levels)
	Refresh rate		10 times/sec
Terminal block	Analog voltage output		±10 V x 2 outputs, output impedance: 100 Ω
	Analog current output		4 to 20 mA x 2 outputs, maximum load resistance: 350 Ω
	Timing input		For OUT1, non-voltage input
	Reset input
	Auto-zero input
	Laser remote interlock input		Non-voltage input
	Comparator output		For OUT1, NPN open-collector output
	Alarm output		For OUT1, NPN open-collector output (N.C.)
Expansion connector	Timing input		For OUT2, non-voltage input
	Reset input
	Auto-zero input
	Program switching input		Non-voltage input x 3 inputs
	Laser-Off input		For Head A/Head B, non-voltage input
	Comparator output		For OUT2, NPN open-collector output
	Alarm output		For OUT2, NPN open-collector output (N.C.)
	Binary	Binary output	Measured data output (21 bits), OUT1/OUT2 selectable, NPN open-collector output
		Strobe output	NPN open-collector output
		Binary selector output
		Binary selector input	Non-voltage input
RS-232C interface			Measured data output and control input/output (Maximum baud rate: 115,200 bps, selectable)
USB interface			In conformity with USB Revision 2.0 Full speed (USB1.1 compatible)
Major functions			2 OUT simultaneous measurement, Operation, Averaging, Filter, Calibration, Measurement, AUTO ZERO, Sampling frequency setting, Mutual interference prevention, Data storage, 8-program memory, ECO mode, ABLE setting, Target setting, ABLE tuning, Selection of measurement surface of transparent target, Statistics processing, Connection of setting support software, Selectable head-mounting, etc.
Rating	Power voltage		24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption		500 mA or less with 1 head/600 mA or less with 2 heads
Environmental resistance	Ambient temperature		0 to +50 °C 32 to 122 °F
	Relative humidity		35 to 85 % RH (No condensation)
Weight			Approx. 480 g
^1 The rating of the NPN open-collector: 50 mA max. (40 V max.), residual voltage of 1 V max. The rating of non-voltage input: 1 V or less ON voltage, 0.6 mA or less OFF current. ^2 LK-G3001(P) can be operated singly. The measured value display and setting modifications can be performed on the display panel (LK-GD500) or via the setting support software (LK-H1W).

Keyence LJ-S080 Keyence

$0.00

Sold Out

Specifications

Model			LJ-S080
Reference distance			160 mm 6.30" ^*1
Measurement range	Z-axis (height)		±23 mm ±0.91" (F.S.=46 mm 1.81")
	X-axis (width)	NEAR side	66 mm 2.60"
		Reference distance	72 mm 2.83"
		FAR side	78 mm 3.07"
	Y-axis	Reference distance	160 mm 6.30"
XY data interval			25 μm 0.0010"
Number of XY data points			3200 × 6400
Light source	Laser light source		405 nm (visible light) wavelength blue semiconductor laser
	Laser class		Class 2M laser product^2 (IEC 60825-1, FDA (CDRH) Part 1040.10^3)
	Output		10 mW
Repeatability	Z-axis (height)		1 μm 0.000039" ^*4
	XY (distance)		3 μm 0.000118" ^*5
Linearity	Standard area		±0.055% of F.S. ^*6
	High-accuracy area		±0.03% of F.S. ^*6
Imaging time			Min. 0.2 sec ^*7
I/F	Ethernet		1000BASE-T, 100BASE-TX
	Input		LASER_ON, TRG, MEM_CLEAR ^*8
	Output		READY, EXPOSURE_BUSY, ERROR ^*8
Ratings	Power voltage		24 VDC +25%, -20%
	Current consumption / Power		Max. 4.0 A (at 19.2 V), 3.2 A (at 24 V) ^*9 / Typ. 17 W
Environmental resistance	Enclosure rating		IP65 (IEC60529) ^*10
	Ambient light		Incandescent lamp: 10000 lux or less ^*11
	Ambient temperature		0 to +45°C 32.0°F to +113.0°F ^*12
	Relative humidity		85% RH or below (no condensation)
	Vibration resistance		10 to 500 Hz; Power spectral density: 0.033 G2/Hz; X, Y, and Z directions (IEC 60068-2-64)
	Shock resistance		15 G (IEC 60068-2-27)
Material			Aluminum
Weight			Approx. 2600 g 5.73 lb
^1 The reference distance is the distance from the bottom edge of the head to the measurement center of the Z-axis (height). See the Dimensions section for the installation reference plane. ^2 Do not view the beam directly using optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Observing the laser output using optical instruments is dangerous and may damage the eyes. ^3 Laser classification performed based on IEC60825-1 in accordance with FDA (CDRH) Laser Notice. ^4 The measured target is a KEYENCE standard target. Sigma value when the average height of 200 × 200 points in the center of the field of view is measured using the height tool with reciprocating imaging OFF. ^5 The measured target is a KEYENCE standard target. Sigma value when the distance between two circles of 500 points in diameter set 1000 points apart at the center of the field of view on a grayscale image is measured using the circle and circle distance tool with reciprocating imaging OFF. ^6 The measured target is a KEYENCE standard target. Value when the average height of 200 × 200 points is measured using the height tool with reciprocating imaging OFF. See the Dimensions section for the high-accuracy area reference plane. ^7 With YZ range minimum and Y skipping maximum. ^8 Laser ON input is enabled only when connected to a controller. ^9 The maximum value may be exceeded when extreme acceleration is applied. ^10 With an OP cable connected. ^11 When measuring white paper, illuminance on the sensor head receiving surface when light is applied to white paper. ^12 The head needs to be mounted to a metal plate to be used.