Distance & Measurement Sensors

Sick OD2-N30W04I2 DISPLAC. SENS, OPTICAL Sick

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Sick OD2-N30W04U0 DISPLAC. SENS, OPTICAL Sick

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Sick OD2-P120W60I2 DISPLAC. SENS, OPTICAL Sick

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Sick OD2-N85W20A2 DISPLAC. SENS, OPTICAL Sick

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Sick OD2-N85W20I2 DISPLAC. SENS, OPTICAL Sick

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Sick OD5-25W01 DISPLAC. SENS, OPTICAL Sick

$922.50

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Sick OD2-N50W10C0 DISPLAC. SENS, OPTICAL Sick

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Sick OD2-P85W20U0 DISPLAC. SENS, OPTICAL Sick

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Leuze ODS96BMC6-600-S12 Leuze

$0.00

Sold Out

Leuze Optical Distance Sensor (P/N: ODS 96B M/C6-600-S12). Laser or LED distance measurement sensor providing precise analog and switching outputs for position control, height measurement, and loop control. High accuracy with configurable measuring range and IO-Link communication for factory automation.

Leuze ODSL96BMC6-S12 Leuze

$0.00

Sold Out

Leuze Optical Distance Sensor (P/N: ODSL 96B M/C6-S12). Laser or LED distance measurement sensor providing precise analog and switching outputs for position control, height measurement, and loop control. High accuracy with configurable measuring range and IO-Link communication for factory automation.

Leuze ODSL96BMV6-2000-S12 Leuze

$0.00

Sold Out

Leuze Optical Distance Sensor (P/N: ODSL 96B M/V6-2000-S12). Laser or LED distance measurement sensor providing precise analog and switching outputs for position control, height measurement, and loop control. High accuracy with configurable measuring range and IO-Link communication for factory automation.

Leuze ODSL9C6-100-S12 Leuze

$0.00

Sold Out

Leuze Optical Distance Sensor (P/N: ODSL 9/C6-100-S12). Laser or LED distance measurement sensor providing precise analog and switching outputs for position control, height measurement, and loop control. High accuracy with configurable measuring range and IO-Link communication for factory automation.

Leuze ODSL8V66-500-S12 Leuze

$1,369.19

Only 6 units left

Leuze Optical Distance Sensor (P/N: ODSL 8/V66-500-S12). Laser or LED distance measurement sensor providing precise analog and switching outputs for position control, height measurement, and loop control. High accuracy with configurable measuring range and IO-Link communication for factory automation.

Leuze ODT22001-4111-X169NEWNO Leuze

$0.00

Sold Out

Leuze Industrial Sensor/Component (P/N: ODT 2/200.1-4111-X169 +NEW NO). Industrial automation sensor or accessory from Leuze electronic for detection, measurement, safety, or identification applications in factory and logistics automation.

Leuze ODSL96BMV6S-800-S12 Leuze

$0.00

Sold Out

Leuze Optical Distance Sensor (P/N: ODSL 96B M/V6.S-800-S12). Laser or LED distance measurement sensor providing precise analog and switching outputs for position control, height measurement, and loop control. High accuracy with configurable measuring range and IO-Link communication for factory automation.

Leuze ODSLR96BMC6-2000-S12 Leuze

$0.00

Sold Out

Leuze Optical Distance Sensor (P/N: ODSLR 96B M/C6-2000-S12). Laser or LED distance measurement sensor providing precise analog and switching outputs for position control, height measurement, and loop control. High accuracy with configurable measuring range and IO-Link communication for factory automation.

Leuze ODS9L2-8 Leuze

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Leuze ODS9L28L6X-200-M12 Leuze

$0.00

Sold Out

Leuze Optical Distance Sensor (P/N: ODS9L2.8/L6X-200-M12). Laser or LED distance measurement sensor providing precise analog and switching outputs for position control, height measurement, and loop control. High accuracy with configurable measuring range and IO-Link communication for factory automation.

Leuze ODSL96BMC605-2000-S12 Leuze

$0.00

Sold Out

Leuze Optical Distance Sensor (P/N: ODSL 96B M/C6.05-2000-S12). Laser or LED distance measurement sensor providing precise analog and switching outputs for position control, height measurement, and loop control. High accuracy with configurable measuring range and IO-Link communication for factory automation.

Keyence LR-W500 Keyence

$378.14

In stock, 14 units

Specifications

Model		LR-W500
Type		2 m 6.56' cable type
Detecting distance		30 to 500 mm 1.18" to 19.69"
Min. spot diameter		Adjustable spot Approx. ø3.5 mm at 100 mm ø0.14" at 3.94" Approx. ø9 mm at 250 mm ø0.35" at 9.84" Approx. ø18 mm at 500 mm ø0.71" at 19.69"
Light source		White LED
Mutual interference reduction function		Up to 2 units when alternate frequencies set
Timer		OFF/ON delay/OFF delay/One-shot
Response time		200 µs/1 ms/10 ms/100 ms/500 ms selectable ^*1
I/O	Control output	NPN open collector/PNP open collector selectable 30 VDC or less, 50 mA or less, remaining voltage: 2 V or less N.O./N.C. selectable ^*2
	External input	Tuning /Transmission OFF selectable Short circuit current: 1 mA or less for NPN/2 mA or less for PNP For the applied voltage, see the wiring diagrams in the instruction manual. For the input times, see the time charts in the instruction manual. ^*2
Protection circuit		Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection
Power supply	Power voltage	10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
	Current consumption	65 mA or less (without load) at 24 VDC; 120 mA or less (without load) at 12 VDC ^*3
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient light	Incandescent lamp: 10,000 lux or less, Sunlight: 20,000 lux or less
	Ambient temperature	-20 to +50 °C -4 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: Zinc die cast (Nickel chrome plating), Indicator cover: PPSU, Buttons: PES Lens cover and display: PMMA (scratch-resistant coating), Cable bushing: PBT, Cable: PVC, Spot adjustment dial: Iron (triiron tetraoxide coated)
Weight		Approx. 170 g (including cable)
^1 When alternate frequencies are set, the response time increases by approximately 20%. ^2 IO-Link: Specification v.1.1/COM2 (38.4 kbps) is supported. The setup file can be downloaded from KEYENCE website (http://www.keyence.com). If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office. ^*3 195 mA or less (at 10 V, with load)

Keyence LK-G87 Keyence

$1,999.36

Only 6 units left

Specifications

Model		LK-G87
Reference distance		Diffused reflection: 80 mm 3.15", Specular reflection: 75.2 mm 2.96"(Specular reflection)
Measuring range		Diffused reflection: ±15 mm ±0.59", Specular reflection: ±14 mm ±0.55"^1^2
Light source	Type	Red semiconductor laser
	Wavelength	655 nm (visible light)
	Laser Class	Class II (FDA CDRH 21CFR PART1040.10)
	Output	0.95 mW
Spot diameter (at reference distance)		Approx. 70 x 1,100 µm 0.0028" x 0.0433"
Linearity		±0.05 % of F.S. (F.S.= ±15 mm ±0.59")^*3
Repeatability		0.2 µm 0.000008"^*4
Sampling frequency		20 / 50 / 100 / 200 / 500 / 1,000 µs (Selectable from 6 levels)
LED display		Near the center of the measurement: Green lights Within the measurement area: Orange lights Outside the measurement area: Orange flashing
Temperature characteristics		0.01 % of F.S./°C (F.S.= ±15 mm ±0.59")
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient light	Incandescent lamp or Fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 380 g (including the cable)
^1 The range is obtained by measuring KEYENCE's standard target (ceramic). ^2 When the sampling rate is 20 µs, the range becomes -9 -0.35" (NEAR side) to -15 mm -0.59" (NEAR side) for Diffused reflection, and -8.7 -0.34" (NEAR side) to -14 mm -0.55" (NEAR side) for specular reflection. ^3 The range is obtained by measuring KEYENCE's standard target (ceramic) with the Standard mode. ^4 The range is obtained by measuring KEYENCE's standard (SUS) with 4,096 times of averaging at the reference distance.

Keyence LR-X50 Keyence

$354.02

Only 6 units left

Specifications

Model		LR-X50
Type		Cable Type
Detecting Distance		25.0 to 50.0 mm 0.98" to 1.97"
Standard Detectable Deviation		0.5 mm 0.02"
Display Resolution		0.1 mm 0.004"
Spot Size		Approx. 0.2 mm × 1.5 mm 0.008" × 0.06" (at a detecting distance of 50 mm 1.97")
Response Time		500 µs^*1/1 ms/3 ms/10 ms/200 ms Selectable
Light Source	Type	Green laser (505 nm)
	Laser Class	Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10^*2)
IO-Link		Specification v1.1/COM2 (38.4 kbps)
Functions	Timer Function	Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot
I/O	Control Output	NPN open collector/PNP open collector, N.O./N.C selectable.　　^*3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower
	External Input	External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable　　^*3 Short circuit current - NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only)
Protection Circuit		Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection
Power supply	Power voltage	16 to 30 VDC (including 10% ripple (P-P) or less), class 2
	Power consumption	During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current)
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient light	Incandescent lamp: 16000 lux or less Sunlight: 16000 lux or less
	Ambient temperature	-10°C to +50°C 14°F to + 122°F (no freezing)
	Relative humidity	35 to 85% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power Spectral Density: 0.816 G²/Hz for X, Y and Z axes
	Shock resistance	1000 m/s² (100G) 6 times each for X, Y, and Z axes
Material		Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM
Accessories		Instruction manual, laser warning label
Weight		Approx. 90 g
^1 If 500 µs is selected, the following limitations apply. · Only 2-point calibration can be performed. · The detection range masking is set during calibration. (Manual setting of the masking range is not supported.) · Output 2 is limited to an alarm output for errors and gyro issues, and standard/area cannot be used. ^2 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice. ^*3 The I/O can be selected from the following combinations. Control output × 2, Control output + External input

Keyence LR-X250C Keyence

$450.51

In stock, 15 units

Specifications

Model		LR-X250C
Type		M8 Connector Type^*1
Detecting Distance		30 to 250 mm 1.18" to 9.84"
Standard Detectable Deviation		30 to 180 mm: 9 mm 1.18" to 7.09": 0.35" 180 to 250 mm: 18 mm 7.09" to 9.84": 0.71"
Display Resolution		1 to 2 mm 0.04" to 0.08"
Spot Size		Approx. 0.8 mm × 1.2 mm 0.03" × 0.05" (at a detecting distance of 250 mm 9.84")
Response Time		500 µs^*2/1 ms/3 ms/10 ms/200 ms Selectable
Light Source	Type	Green laser (505 nm)
	Laser Class	Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10^*3)
IO-Link		Specification v1.1/COM2 (38.4 kbps)
Functions	Timer Function	Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot
I/O	Control Output	NPN open collector/PNP open collector, N.O./N.C selectable.　　^*4 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower
	External Input	External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable　　^*4 Short circuit current - NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only)
Protection Circuit		Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection
Power supply	Power voltage	16 to 30 VDC (including 10% ripple (P-P) or less), class 2
	Power consumption	During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current)
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient light	Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less
	Ambient temperature	-10°C to +50°C 14°F to + 122°F (no freezing)
	Relative humidity	35 to 85% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power Spectral Density: 0.816 G²/Hz for X, Y and Z axes
	Shock resistance	1000 m/s² (100G) 6 times each for X, Y, and Z axes
Material		Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM Amplifier M8 Connector: SUS303
Accessories		Instruction manual, laser warning label
Weight		Approx. 35 g
^1 Ensure the cable length is 30 m 98.4' or less for the M8 connector type. Ensure the cable length is 20 m 65.6' or less when connecting via IO-Link. ^2 If 500 µs is selected, the following limitations apply. · Only 2-point calibration can be performed. · The detection range masking is set during calibration. (Manual setting of the masking range is not supported.) · Output 2 is limited to an alarm output for errors and gyro issues, and standard/area cannot be used. ^3 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice. ^4 The I/O can be selected from the following combinations. Control output × 2, Control output + External input

Keyence LJ-V7060B Keyence

$3,209.20

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.