1 year warranty
plug in base, Compact NSX 400/630, front/rear connected, 3 poles
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
trip unit Micrologic 6.3 E for Compact NSX 630 circuit breakers, electronic, rating 630A, 4 poles 4d
Specifications
Model |
PR-F51N1 |
|||
Type |
Thrubeam |
|||
Output |
NPN |
|||
Shape |
Flat |
|||
Cable connection |
1 m cable |
|||
Detection distance |
0.6 m |
|||
Number of control outputs |
2 outputs |
|||
Output operation |
Output 1 |
Dark-ON |
||
Output 2 |
Light-ON |
|||
Response time |
Output 1 |
0.5 ms |
||
Output 2 |
ON→OFF: 2.7 ms, OFF→ON: 0.5 ms |
|||
Sensitivity adjustment |
None |
|||
Spot diameter |
- |
|||
Light source |
4 element, point light source, red LED (650 nm) |
|||
Mutual interference prevention function |
- |
|||
Indicator lamp |
Output indicator (orange), stable operation indicator (green), thrubeam type transmitter: power supply indicator (green) |
|||
Control output |
30 VDC or lower, 50 mA or lower |
|||
Protection circuit |
Power supply reverse connection protection, output overcurrent protection, |
|||
Rating |
Power voltage |
10 to 30 VDC, including Ripple (P-P) 10 % |
||
Current consumption |
Transmitter: 11 mA, Receiver: 16 mA |
|||
Environmental resistance |
Enclosure rating |
IP67 (IEC60529), IP69K (DIN40050-9), 4X, 6P, 13 (NEMA250) |
||
Insulation resistance |
20 MΩ or higher (500 VDC) |
|||
Ambient light |
Incandescent lamp: 5,000 lux or lower, Sunlight: 20,000 lux or lower |
|||
Ambient temperature |
-25 to +55 °C -13 to 131 °F (No freezing) |
|||
Relative humidity |
35 to 85 % RH (No condensation) |
|||
Storage temperature |
-25 to +75 °C -13 to 167 °F |
|||
Withstand voltage |
1,000 VAC, 50/60 Hz, 1 min |
|||
Vibration resistance |
10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions |
|||
Shock resistance |
1,000 m/s2, 6 times in each of the X, Y, and Z directions |
|||
Material |
Case: SUS316L, indicator cover/lens cover: polysulfone, |
|||
Accessories |
Instruction manual |
|||
Weight |
Approx. 36 g |
|||
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
TeSys D control relay - 3 NO + 2 NC - <= 690 V - 24 V DC standard coil
ABB EcoSolutions
Technical
Type F APR
63 A
1 kA
0.25 kA
A
4P
Instantaneous (APR High Immunity)
Right
Yes
1 - Solid-Core 0...25 mm²
4 - Multi-Wired 0...25 mm²
1 - Solid-Core 0...25 mm²
4 - Multi-Wired 0...25 mm²
Electrical
0.03 A
230 / 400 V
230 ... 400 V AC
500 V
4 kV
AC
63 A
30 mA
50 ... 60 Hz
3.2 W
Material Compliance
Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019
20210225
True - contains substances > 0.1 mass percentage
20230417
5. Small Equipment (No External Dimension More Than 50 cm)
Business To Business
Environmental
Dimensions
4
72 mm
91 mm
75 mm
430 g
69 mm
Engineering
Ordering
carton 1 piece
490 g
1623579
531443205
Certificates and Declarations
Installation
Popular Downloads
External Classifications and Standards
EC000003 - Residual current circuit breaker (RCCB)
EC000003 - Residual current circuit breaker (RCCB)
V11.0 : 27142201
FB
IEC/EN 61008
CPU logic module and inputs / outputs. CL-LER.18DC2 Mod. Of expansion 24V c.c. with 12 digital inputs and 6 relay outputs expansion outputs / outputs
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Altivar |
| Product or Component Type | Variable speed drive |
| Product Specific Application | Simple machine |
| Component name | ATV31 |
| Assembly style | With heat sink |
| Variant | With drive order potentiometer |
| EMC filter | Integrated |
| [Us] rated supply voltage | 380...500 V - 5...5 % |
| Supply frequency | 50...60 Hz - 5...5 % |
| Phase | 3 phase |
| Motor power kW | 11 kW 4 kHz |
| Maximum Horse Power Rating | 15 hp 4 kHz |
| Line current | 28.4 A 500 V 37.2 A 380 V, Isc = 1 kA |
| Apparent power | 25 kVA |
| Prospective line Isc | 1 kA |
| Nominal output current | 27.7 A 4 kHz |
| Maximum transient current | 41.6 A 60 s |
| Power dissipation in W | 397 W at nominal load |
| Asynchronous motor control profile | Sensorless flux vector control with PWM type motor control signal Factory set : constant torque |
| Analogue input number | 4 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Product destination | Asynchronous motors |
| Supply voltage limits | 323â¦550 V |
| Network Frequency | 47.5...63 Hz |
| Output frequency | 0.0005â¦0.5 kHz |
| Nominal switching frequency | 4 kHz |
| Switching frequency | 2...16 kHz adjustable |
| Speed range | 1â¦50 |
| Transient overtorque | 150â¦170 % of nominal motor torque |
| Braking torque | <= 150 % 60 s with braking resistor 100 % with braking resistor continuously 150 % without braking resistor |
| Regulation loop | Frequency PI regulator |
| Motor slip compensation | Suppressable Adjustable Automatic whatever the load |
| Output voltage | <= power supply voltage |
| Electrical connection | Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 0.004 in² (2.5 mm²) AWG 14 L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 0.004 in² (2.5 mm²) AWG 14 |
| Tightening torque | Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 5.3 lbf.in (0.6 N.m) L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- 7.08 lbf.in (0.8 N.m) |
| Insulation | Electrical between power and control |
| Supply | Internal supply for logic inputs 19...30 V 100 mA overload and short-circuit protection Internal supply for reference potentiometer (2.2 to 10 kOhm) 10...10.8 V 10 mA overload and short-circuit protection |
| Analogue input type | AI3 configurable current 0...20 mA 250 Ohm AI1 configurable voltage 0...10 V 30 V max 30000 Ohm AI2 configurable voltage +/- 10 V 30 V max 30000 Ohm AIP potentiometer reference 8 ms 10 bits +/- 4.3 % +/- 0.2 % |
| Sampling duration | LI1...LI6 4 ms discrete AI1, AI2, AI3 8 ms analog |
| Response time | AOV, AOC 8 ms analog R1A, R1B, R1C, R2A, R2B 8 ms discrete |
| Linearity error | +/- 0.2 % output |
| Analogue output number | 2 |
| Analogue output type | AOC configurable current 0...20 mA 800 Ohm 8 bits AOV configurable voltage 0...10 V 470 Ohm 8 bits |
| Discrete input logic | Positive logic (source) LI1...LI6), < 5 V, > 11 V Logic input not wired LI1...LI4), < 13 V Negative logic (source) LI1...LI6), > 19 V |
| Discrete output number | 2 |
| Discrete output type | Configurable relay logic R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles Configurable relay logic R2A, R2B) NC - 100000 cycles |
| Minimum switching current | R1-R2 10 mA 5 V DC |
| Maximum switching current | R1-R2 2 A 250 V AC inductive, cos phi = 0.4 7 ms R1-R2 2 A 30 V DC inductive, cos phi = 0.4 7 ms R1-R2 5 A 250 V AC resistive, cos phi = 1 0 ms R1-R2 5 A 30 V DC resistive, cos phi = 1 0 ms |
| Discrete input number | 6 |
| Discrete input type | LI1...LI6) programmable 24 V, 0â¦100 mA PLC 3500 Ohm |
| Acceleration and deceleration ramps | S, U or customized Linear adjustable separately from 0.1 to 999.9 s |
| Braking to standstill | By DC injection |
| Protection type | Input phase breaks drive Line supply overvoltage and undervoltage safety circuits drive Line supply phase loss safety function, for three phases supply drive Motor phase breaks drive Overcurrent between output phases and earth (on power up only) drive Overheating protection drive Short-circuit between motor phases drive Thermal protection motor |
| Insulation resistance | >= 500 mOhm 500 V DC for 1 minute |
| Display type | 1 LED Red)drive voltage Four 7-segment display unitsCANopen bus status |
| Time constant | 5 ms for reference change |
| Frequency resolution | Display unit 0.1 Hz Analog input 0.1...100 Hz |
| Connector type | 1 RJ45 CANopen via VW3 CANTAP2 adaptor 1 RJ45 Modbus |
| Physical interface | RS485 multidrop serial link CANopen via VW3 CANTAP2 adaptor RS485 multidrop serial link Modbus |
| Transmission frame | RTU CANopen via VW3 CANTAP2 adaptor RTU Modbus |
| Transmission Rate | 10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen via VW3 CANTAP2 adaptor 4800, 9600 or 19200 bps Modbus |
| Number of addresses | 1â¦127 CANopen via VW3 CANTAP2 adaptor 1â¦247 Modbus |
| Number of drive | 127 CANopen via VW3 CANTAP2 adaptor 31 Modbus |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Product Weight | 24.3 lb(US) (11 kg) |
Ordering
1 piece
85365011
Smile
Reset button
Popular Downloads
Dimensions
36 mm
109 mm
40 mm
0.06 kg
Technical
Adam DYN-Reset M12-5
Adam OSSD-Reset M12-5
Adam DYN-Reset M12-5
Adam OSSD-Reset M12-5
Material Compliance
Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019
Business To Business
5. Small Equipment (No External Dimension More Than 50 cm)
Certificates and Declarations
Container Information
box 1 piece
150 mm
55 mm
78 mm
0.16 kg
7350024479584
External Classifications and Standards
V11.0 : 27371228
EC000225 - Control circuit devices combination in enclosure
EC000225 - Control circuit devices combination in enclosure
EC001028 - Push button, complete
4773 >> Emergency stop device
39121545
B
3705103
Soft Starter 230V/45kW, 400V/90kW, 500V/110kW, 171A
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Main
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Lexium 32i |
| Device short name | BMI |
| Product or Component Type | Servo motor with power stage |
Complementary
| Characteristic | Value(s) |
|---|---|
| Maximum mechanical speed | 6000 rpm |
| [Us] rated supply voltage | 208...480 V - 15...10 % |
| Supply voltage limits | 208â¦480 V |
| Phase | Three phase |
| Supply frequency | 50/60 Hz - 5...5 % |
| Network frequency limits | 47.5â¦63 Hz |
| EMC filter | Integrated |
| Continuous output current | 4 A 8 kHz |
| Output current 3s peak | 12 A 400 V 3 s |
| Continuous stall current | 4 A |
| Continuous stall torque | 75.2 lbf.in (8.5 N.m) 208...480 V three phase |
| Peak stall torque | 169.9 lbf.in (19.2 N.m) 400 V three phase 169.9 lbf.in (19.2 N.m) 480 V three phase 169.9 lbf.in (19.2 N.m) 208 V three phase |
| Nominal output power | 1000 W 208 V three phase 2000 W 400 V three phase 2100 W 480 V three phase |
| Nominal torque | 63.7 lbf.in (7.2 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 49.6 lbf.in (5.6 N.m) 480 V three phase |
| Nominal speed | 1500 rpm 208 V three phase 3000 rpm 400 V three phase 3700 rpm 480 V three phase |
| Maximum current Irms | 26.7 A 208 V, three phase 26.7 A 400 V, three phase 26.7 A 480 V, three phase |
| Product compatibility | Drive control unit LXM32i CANopen Drive control unit LXM32i EtherCAT |
| Shaft end | Keyed |
| Second shaft | Without second shaft end |
| Shaft diameter | 0.7 in (19 mm) |
| Shaft length | 1.6 in (40 mm) |
| key width | 0.2 in (6 mm) |
| Feedback type | Absolute single turn SinCos Hiperface |
| Speed feedback resolution | 32768 points/turn |
| Holding brake | Without |
| Mounting Support | International standard flange |
| Motor flange size | 3.9 in (100 mm) |
| Electrical Connection | Printed circuit board connector |
| Torque constant | 1.7 N.m/A 68 °F (20 °C) |
| Back emf constant | 112 V/krpm 68 °F (20 °C) |
| Number of motor poles | 10 |
| Rotor inertia | 9.37 kg.cm² |
| Stator resistance | 2.31 Ohm 68 °F (20 °C) |
| Stator inductance | 11.43 mH 68 °F (20 °C) |
| Stator electrical time constant | 4.95 ms 68 °F (20 °C) |
| Maximum radial force Fr | 1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm |
| Maximum axial force Fa | 0.2 x Fr |
| type of cooling | Natural convection |
| Length | 11.8 in (299 mm) |
| Number of motor stacks | 3 |
| Centring collar diameter | 3.7 in (95 mm) |
| centring collar depth | 0.1 in (3.5 mm) |
| Number of mounting holes | 4 |
| Mounting holes diameter | 0.4 in (9 mm) |
| Circle diameter of the mounting holes | 4.5 in (115 mm) |
| Distance shaft shoulder-flange | 0.1 in (3.5 mm) |