1 year warranty
Main
| Characteristic | Value(s) |
|---|---|
| Range | TeSys |
| product name | TeSys T |
| Device short name | LTMR |
| Product or Component Type | Motor controller |
| Device Application | Equipment monitoring and control |
| Measurement current | 1.35â¦27 A |
| [Us] rated supply voltage | 24 V DC |
| Current Consumption | 56...127 mA |
| Supply voltage limits | 20.4â¦26.24 V DC |
| Communication Port Protocol | CANopen |
| Bus type | CANopen ISO 1198 1...127 10...1000 kbit/s, SUB-D 9 4 twisted shielded pairs cable CANopen ISO 1198 1...127 10...1000 kbit/s, terminal block 4 twisted shielded pairs cable |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ui] rated insulation voltage | 690 V EN/IEC 60947-1 690 V CSA C22.2 No 14 690 V UL 508 |
| [Uimp] rated impulse withstand voltage | 6 kV current or voltage measurement circuit EN/IEC 60947-4-1 0.8 kV communication circuit EN/IEC 60947-4-1 0.8 kV supply, inputs and outputs EN/IEC 60947-4-1 |
| Short-circuit withstand | 100 kA conforming to EN/IEC 60947-4-1 |
| Associated fuse rating | 4 A gG output 0.5 A gG control circuit |
| Protection Type | Overload (long time) Thermal protection Load fluctuation Locked rotor Overload Thermal overload protection Power factor variation Phase unbalance Reverse polarity protection Earth-leakage protection Phase failure |
| Network and machine diagnosis type | Phase fault and earth fault trip counters Trip context information Waiting time after overload tripping Fault recording Remaining operating time before overload tripping Starting current and time Motor control command recording Event recording Running hours counter/operating time Trip history information |
| Logic input number | 6 |
| Input current | 7 mA |
| Current state 0 guaranteed | Logic input < 5 V <= 15 mA 5 ms |
| Current state 1 guaranteed | Logic input < 15 V 2...15 mA 15 ms |
| maximum output switching frequency | 2 Hz |
| Load current | 5 A 250 V AC logic output 5 A 30 V DC logic output |
| Permissible power | 480 VA AC-15), Ie = 2 A, 500000 cycles output) 30 W DC-13), Ie = 1.25 A, 500000 cycles output) |
| Maximum operating rate | 1800 cyc/h |
| Contacts type and composition | 1 NO + 1 NC fault signal 3 NO |
| Metering type | Temperature Imbalance current Phase current I1, I2, I3 RMS Earth-fault current Average current Iavg |
| Measurement accuracy | 5...15 % earth fault current internal measurement 1 % voltage 100...830 V) 3 % power factor 5 % earth fault current external measurement +/- 30 min/year internal clock 0,02 Temperature 1 % current 5 % active and reactive power |
| Overvoltage category | III |
| Connection pitch | 0.20 in (5.08 mm) |
| Connections - terminals | Control circuit connector 1 0.0004â¦0.004 in² (0.25â¦2.5 mm²) AWG 24...AWG 14)flexible with cable end Control circuit connector 1 0.0003â¦0.004 in² (0.2â¦2.5 mm²) AWG 24...AWG 14)flexible without cable end Control circuit connector 1 0.0004â¦0.004 in² (0.25â¦2.5 mm²) AWG 24...AWG 14)flexible without cable end Control circuit connector 1 0.0003â¦0.004 in² (0.2â¦2.5 mm²) AWG 24...AWG 14)solid without cable end Control circuit connector 2 0.0003â¦0.002 in² (0.2â¦1 mm²) AWG 24...AWG 14)flexible with cable end Control circuit connector 2 0.0003â¦0.002 in² (0.2â¦1.5 mm²) AWG 24...AWG 14)flexible without cable end Control circuit connector 2 0.0008â¦0.002 in² (0.5â¦1.5 mm²) AWG 24...AWG 14)flexible without cable end Control circuit connector 2 0.0003â¦0.002 in² (0.2â¦1 mm²) AWG 24...AWG 14)solid without cable end |
| Tightening torque | Control circuit: 4.4â¦5.3 lbf.in (0.5â¦0.6 N.m) flat screwdriver 0.1 in (3 mm) |
| pollution degree | 3 |
| Electromagnetic compatibility | Electrostatic discharge, 3, 8 kV air, 6 kV contact, conforming to EN/IEC 61000-4-2 Radiated RF fields, 3, 10 V/m, conforming to EN/IEC 61000-4-3 Fast transients immunity test (other circuits), level 3, 2 kV, conforming to EN/IEC 61000-4-4 Fast transients immunity test (on supply and relay outputs), level 4, 4 kV, conforming to EN/IEC 61000-4-4 Voltage dips and interruptions immunity test, 70 %, 500 ms, conforming to EN/IEC 61000-4-11 Conducted RF disturbances, 10 V, conforming to EN/IEC 61000-4-6 Temperature sensor: surges (serial mode), 0.5 kV, conforming to EN/IEC 61000-4-5 Temperature sensor: surges (common mode), 1 kV, conforming to EN/IEC 61000-4-5 Control circuit: surges (serial mode), 1 kV, conforming to EN/IEC 61000-4-5 Control circuit: surges (common mode), 1 kV, conforming to EN/IEC 61000-4-5 Communication: surges (common mode), 2 kV, conforming to EN/IEC 61000-4-5 Relay outputs and supply: surges (serial mode), 2 kV, conforming to EN/IEC 61000-4-5 Relay outputs and supply: surges (common mode), 4 kV, conforming to EN/IEC 61000-4-5 |
| Width | 3.6 in (91 mm) |
| Height | 2.4 in (61 mm) |
| Depth | 4.8 in (122.5 mm) |
| Product Weight | 1.17 lb(US) (0.53 kg) |
| Web services | Web server |
| Compatibility code | LTMR |
The SGMCS10C3B11, now phased out, serves as a high-efficiency AC servo motor tailored for direct drive mechanisms. With its operational speed capped at 200 RPM and drawing power of 209 W at 200 V and 2.0 A, it is engineered to fulfill the requirements of small to medium applications. This motor boasts a compact size with a 175 mm diameter and features a C face flange, delivering a dependable performance with a rated torque of 10 Nm and a peak torque of 30 Nm, complemented by a 20-bit absolute encoder for enhanced precision.
Motor circuit breaker, TeSys GV4, 3P, 80A, Icu 100kA, thermal magnetic, Everlink terminals
Specifications
Model |
XM-1500 |
|||
Type |
Controller |
|||
HDD |
320 GB |
|||
Interfaces |
Measuring unit |
Dedicated cable |
||
Communication (external communication) |
RS-232C |
|||
Display |
External output |
DVI-D |
||
Measuring mode |
Program mode/Run mode/Statistic analysis/Single measurement |
|||
No. of configurable elements |
500 (excluding comment elements) |
|||
Maximum measurement points |
200 points (per element) |
|||
Basic |
Measurement between elements |
Distance/Angle/Calculation |
||
Basic elements |
Plane/Line/Point/Circle/Cylinder/Cone/Sphere |
|||
Particular measurement element |
Point - no correction/Ellipse/Single point circle/Stepped cylinder/Oval/Round slot/Corner arc/Chamfer line/Torus |
|||
Virtual figures |
Point |
Midpoint/Contact point/Intersection/Perpendicular/Numerical input/Element specification |
||
Line |
Median line/Tangent line/Intersect line/Projection line/Rotation line/Numerical input/Element specification |
|||
Plane |
Median plane/Parallel plane/Numerical input/Element specification |
|||
Circle |
Intersect circle/Numerical input/Element specification |
|||
GD&T |
Form |
Flatness/Roundness/Straightness/Cylindricity |
||
Orientation |
Parallelism/Perpendicularity/Angularity |
|||
Location |
Position/Concentricity/Coaxiality/Symmetry |
|||
Coordination |
New |
Simple coordinate/Type A coordinate/Type B coordinate/Specified coordinate |
||
Change |
Base plane settings/Fit axis to point/Fit axis to line/Rotate axis/Fix axis to offset point/Set origin/Reset coordinate |
|||
Work adjust. |
Work adjust |
|||
Apps |
Distance |
Plane-to-point height/Plane-to-plane distance/Hole position |
||
Angle |
Dihedral angle/Edge to edge angle |
|||
Diameter |
Diameter/Pitch circle diameter/Lower diameter/Upper diameter |
|||
Position |
Hole position/V groove |
|||
Batch settings |
Batch tolerance settings/Batch settings for output/display Items/Guidance image batch settings/List edit |
|||
No. of measurement macro settings |
100 |
|||
No. of probe settings |
10 |
|||
Average times of measurement |
1/2/4/8/16 |
|||
Check measurement position |
Available |
|||
Print/file output |
Inspection specifications/Single object report/Single object report (with guidance image)/Screen image/Graphic display image/Probe camera image/CSV output |
|||
Import/Export |
Move/Copy/Delete |
|||
Other |
Comment/Other measurement results |
|||
Environmental resistance |
Ambient temperature |
+10 to +35 °C 50 to 95 °F |
||
Relative humidity |
20 to 80 % RH (No condensation) |
|||
Power supply |
Power supply voltage |
100 to 240 VAC 50/60 Hz |
||
Power consumption |
250 VA max. |
|||
Weight |
Approx. 7.7 kg |
|||
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Motor circuit breaker, TeSys GV2, 3P, 0.63-1 A, thermal magnetic, lugs terminals
circuit breaker Compact NSX100R, 200 kA at 415 VAC, Micrologic 2.2 trip unit 40 A, 3 poles 3d
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
