1 year warranty
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Specifications
Model |
LR-ZB250CP |
|||
Type |
Distance based laser sensor |
|||
Appearance |
Rectangular |
|||
Output |
PNP |
|||
Cable connection |
M8 connector, 4-pin |
|||
Detectable distance |
35 to 250 mm 1.38" to 9.84" (215 to 0)*1 |
|||
Standard detectable deviation |
35 to 180 mm 1.38" to 7.09": 9 mm 0.35" |
|||
Display resolution |
1 to 3 (1 to 3 mm 0.04" to 0.12") |
|||
Spot size |
Approx. 2.4 × 1.2 mm 0.09" × 0.05" at 250 mm 9.84" |
|||
Response time |
1.5 ms / 10 ms / 50 ms selectable |
|||
Light source |
Type |
Red laser (660 nm) |
||
Laser class |
Class 1 laser product |
|||
Function |
Indicator |
3-digit 7-segment display (red), |
||
Timer |
OFF/ON delay/OFF delay/One-shot |
|||
Specifications |
Power voltage |
10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS |
||
Power consumption |
450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V) |
|||
Control output |
PNP Open collector, |
|||
Protection circuit |
Protection against reverse power connection, output overcurrent, output surge, reverse output connection |
|||
Output operation |
Light-ON / Dark-ON selectable |
|||
External input |
Input time calibration: 35 ms or more ON, 35 ms or more OFF |
|||
Environmental resistance |
Enclosure rating |
IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*3, Diversey*3 |
||
Insulation resistance |
20 MΩ or more (500 VDC) |
|||
Ambient light |
Incandescent lamp: 2,000 lux or less |
|||
Ambient temperature |
-10 to +50 °C 14 to 122 °F (No freezing) |
|||
Relative humidity |
35 to 85 % RH (No condensation) |
|||
Storage temperature |
-25 to +75 °C -13 to 167 °F (No freezing) |
|||
Withstand voltage |
1,000 VAC, 50/60 Hz, 1 min |
|||
Vibration resistance |
10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions |
|||
Shock resistance |
1,000 m/s2, 6 times in each of the X, Y, and Z directions |
|||
Material |
Case: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, |
|||
Accompanying items |
Instruction Manual, |
|||
Weight |
Approx. 55 g |
|||
*1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed. | ||||
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Specifications
Model |
LR-ZH490CB*1 |
|||
Type |
U.C.D. Function |
|||
Appearance |
M18 Threaded mount |
|||
Output |
NPN/PNP selectable |
|||
Cable connection |
M12 connector, 4-pin |
|||
Detectable distance |
25 to 490 mm 0.98" to 19.29" (465 to 0)*2 |
|||
Standard detectable deviation |
25 to 170 mm 0.98" to 6.69": 9 mm 0.35" |
|||
Display resolution |
1 to 5 (1 to 5 mm 0.04" to 0.20") |
|||
Spot size |
Approx. ø3 mm ø0.12" |
|||
Response time |
1.5 ms / 10 ms / 50 ms selectable |
|||
Light source |
Type |
Red laser (660 nm) |
||
Laser class |
Class 2 laser product (IEC60825-1) |
|||
Function |
Indicator |
3-digit 7-segment display (white), |
||
Timer |
OFF/ON delay/OFF delay/One-shot |
|||
Specifications |
Power voltage |
10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS |
||
Power consumption |
450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V) |
|||
Control output |
NPN open collector/PNP Open collector selectable, |
|||
Protection circuit |
Protection against reverse power connection, output overcurrent, output surge, reverse output connection |
|||
Output operation |
Light-ON / Dark-ON selectable |
|||
External input |
Input time calibration: 35 ms or more ON, 35 ms or more OFF |
|||
Environmental resistance |
Enclosure rating |
IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*3, Diversey*3 |
||
Insulation resistance |
20 MΩ or more (500 VDC) |
|||
Ambient light |
Incandescent lamp: 10,000 lux or less |
|||
Ambient temperature |
-10 to +50 °C 14 to 122 °F (No freezing) |
|||
Relative humidity |
35 to 85 % RH (No condensation) |
|||
Storage temperature |
-25 to +75 °C -13 to 167 °F (No freezing) |
|||
Withstand voltage |
1,000 VAC, 50/60 Hz, 1 min |
|||
Vibration resistance |
10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions |
|||
Shock resistance |
1,000 m/s2, 6 times in each of the X, Y, and Z directions |
|||
Material |
Case: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, |
|||
Accompanying items |
Instruction Manual, |
|||
Weight |
Approx. 75 g |
|||
*1 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. (LR-ZH490CB : Only when PNP output is selected.) You can download a setup file from the KEYENCE website. If using the product in an environment in which downloading files over the internet is not possible, contact your nearest KEYENCE office. | ||||
Specifications
Model |
FU-13*1 |
|||
Fibre unit length |
2 m78.74" free-cut |
|||
Fibre unit diameter |
ø1.0×2 |
|||
Minimum bend radius |
R2 mm0.079" Tough-Flex |
|||
Environmental resistance |
Ambient temperature |
-40 to +50 °C -40 to 122 °F |
||
Weight |
Approx. 8 g |
|||
*1 For details on the detecting distance, see the fiber amplifier catalog. | ||||
Specifications
Model |
FD-Q32C |
|||
Supported pipe diameter |
1" (25 A), ø28 to ø37 (mm) |
|||
Supported pipe materials |
Metal pipe/Resin pipe*1 |
|||
Supported fluids |
Various liquid [i.e. water (including DI), oils, chemicals, etc.]*1 |
|||
Supported fluid temperature |
0 to 85°C 32 to 185°F (No freezing on the pipe surface)*2 |
|||
Maximum rated flow |
1" (25 A): 200 L/min, 52.8 G/min |
|||
Zero cut flow rate |
5 L/min (Default)*3 |
|||
Display method |
Status indicator, output indicator, dual row display with 4-digit, 7 segment LED, stability level indicator |
|||
Display update cycle |
Approx. 3 Hz |
|||
Display resolution |
0.1/ 1 (Default :1) (L/min) |
|||
Response time |
0.5 s / 1.0 s / 2.5 s / 5 s / 10 s / 30 s / 60 s |
|||
Protection circuit |
Power supply reverse connection protection, power supply surge protection, |
|||
Repeatability |
0.5 s : ±2.0%, 1 s:±1.5%, 2.5 s : ±1.0%, 5 s : ±0.5%, 10 s : ±0.35%, 30 s : ±0.2%, 60 s : ±0.15% (/F.S.*4(Specific to selected response time)) |
|||
Hysteresis |
Variable |
|||
Integrated flow unit display |
1/ 10/ 100/ 1000/ 10000 (Default : 1) (L) |
|||
Integrated flow data storage cycle |
Save to memory every 10 seconds |
|||
Memory backup |
EEPROM (Data storage length: 10 years or longer, Data read/write frequency: 1 million times or more) |
|||
Power I/O connector |
M12 4-pin connector |
|||
Input/Output (Selectable) |
Output (ch.1/ch.2) |
Control output/ Pulse output/ Error output (Selectable, Default : ch.1 control output/ ch.2 not used), |
||
Analog output (ch.2) |
4 to 20 mA / 0 to 20 mA (Selectable, Default: not used), load resistance 500 Ω or less*5 |
|||
External input (ch.2) |
Integrated flow reset input/ Flow rate zero input/ Origin adjustment input (Selectable, Default: not used), |
|||
Power supply |
Power voltage |
20 to 30 VDC , ripple (P-P) 10% max, Class2/LPS |
||
Current consumption |
130 mA or less (Load current excluded)*6 |
|||
Environmental resistance |
Enclosure rating |
IP65/IP67 (IEC60529) |
||
Ambient temperature |
-10 to +60 °C 14 to 140 °F (No freezing) |
|||
Relative humidity |
35 to 85 % RH (No condensation) |
|||
Vibration resistance |
10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions |
|||
Shock resistance |
100 m/s2, 16 ms pulse, 1,000 times in each of the X, Y, and Z directions |
|||
Material |
Sensor main unit |
PPS/PES/PBT/SUS303/SUS304/SUSXM7 |
||
Sensor surface |
Rubber |
|||
Mounting bracket |
SUS304/PA/POM/SUSXM7 |
|||
Weight |
Approx. 530 g (including mounting bracket) |
|||
*1 Liquid must allow for the passage of an ultrasonic pulse, as well as not contain large air pockets or excessive bubbles. Detection may be unstable on certain non-standard pipes (i.e. lined pipes) | ||||
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
| Product | |
| Article Number (Market Facing Number) | 7ML11061BA200A | 7ML11061BA200A |
| Product Description | EchoMax XRS-5 Ultrasonic level transducer: continuous, non-contact, 8 m (26 ft) range, for liquids and slurries. Mounting thread: 1" NPT (Taper), ANSI/ASME B1.20.1 Cable length: 10 m (32.81 ft) Facing: Standard (CSM rubber) Approvals: CSA Class I, Div. 2, Groups A, B, C, D; CSA Class II, Div. 1, Groups E, F, G; FM Class I, Zone 1, AEx m IIC, T6; FM Class II, III, Div. 1, Groups E, F, G T6; ATEX II 2GD Ex mb IIC T6 Gb, Ta = -20°C to +65°C; ATEX II 2GD Ex tb IIIC T85°C Db; UKEX II 2GD Ex mb IIC T6 Gb, Ta = -20°C to +65°C; UKEX II 2GD Ex tb IIIC T85°C Db; IECEx Ex mb IIC T6 Gb, Ta = -20°C to +65°C; IECEx Ex tb IIIC T85°C Db; INMETRO Ex mb IIC T6 Gb, IP66/IP68, -20°C ≤ Ta ≤ +65°C; INMETRO Ex tb IIIC T85°C Db, IP66/IP68; CE, UKCA, RCM, KC, EAC Ex . . Flange: Without mounting flange |
| Product family | EchoMax XRS-5 |
| Product Lifecycle (PLM) | PM300:Active Product |
| Additional Product Information | |
| EAN | 4019169849524 |
| UPC | Not available |
| Commodity Code | 9032900000 |
| LKZ_FDB/ CatalogID | FI01-4 |
| Product Group | 4710 |
| Group Code | R3P0 |
| Country of origin | Canada |
| SCIP number | Not available |
| Delivery information | |
| Net Weight (lb) | 3.307 lb |
| Package size unit of measure | Inch |
| Packaging Quantity | 1 |
| Product | |
| Article Number (Market Facing Number) | 6SX70100FF05 | 6SX70100FF05 |
| Product Description | ***SPARE PART*** SIMOVERT Master drives Motion Control/Vector Control Communication module PROFIBUS CBP2 Selivery and brief instructions Retrofit pack without connector |
| Product family | Not available |
| Product Lifecycle (PLM) | PM490:Start of final year of support |
| Additional Product Information | |
| EAN | Not available |
| UPC | 662643072815 |
| Commodity Code | 85049090 |
| LKZ_FDB/ CatalogID | DA65/MC |
| Product Group | 9610 |
| Group Code | R2S3 |
| Country of origin | Germany |
| SCIP number | Not available |
| Delivery information | |
| Net Weight (lb) | 0.220 lb |
| Package size unit of measure | Not available |
| Packaging Quantity | 1 |
| Product | |
| Article Number (Market Facing Number) | 6FC53480AA020AA0 | 6FC53480AA020AA0 |
| Product Description | *Spare part* SINUMERIK/SIMOTION double fan/battery module for NCU 7x0 or D445-1/D4x5-2 incl. battery duty to supply information according to article 33, REACH regulation: the product contains the following substance from the candidate list in concentrations exceeding 0.1% by weight: 1,2 dimethoxyethane; ethylene glycol dimethyl ether (EGDME) (CAS110-71-4) |
| Product family | Ordering Data Overview |
| Product Lifecycle (PLM) | PM400:Announcement of product phase-out |
| Additional Product Information | |
| EAN | Not available |
| UPC | 040892744774 |
| Commodity Code | 84145925 |
| LKZ_FDB/ CatalogID | NC62E |
| Product Group | 5706 |
| Group Code | R2S1 |
| Country of origin | Germany |
| SCIP number | Not available |
| Delivery information | |
| Net Weight (lb) | 0.551 lb |
| Package size unit of measure | Not available |
| Packaging Quantity | 1 |