Vision Systems

$0.00

Sold Out

Specifications

Model				OP-87670
Type				Diameter slit for flat
Applicable product				PR-F Series
Number included				1 pcs.
Slit size				Diameter of 0.5 mm
Material				SUS304
Note				Detecting distance: 30 mm (when attached to both the transmitting and receiving sides) Dedicated for use with thrubeam models
Weight				Approx. 1 g

Keyence OP-88956 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-HF6400C Keyence

$8,724.02

Only 1 unit left

Specifications

Model		CA-HF6400C
Image element		Color CMOS Square pixel 88× high-speed reading
Unit cell size		2.5 μm × 2.5 μm 0.10 Mil × 0.10 Mil
Valid pixel count		64 megapixel mode: 8192 (H) × 7808 (V) 41 megapixel mode: 7168 (H) × 5768 (V) 21 megapixel mode: 5104 (H) × 4092 (V)
Image size		Equivalent to 2" (ø32 mm ø1.26")^*1
Scanning system		Progressive 64 megapixel mode: 59.2 ms (4 ch)/117.2 ms (2 ch)/244.1 ms (1 ch) 41 megapixel mode: 40.4 ms (4 ch)/74.7 ms (2 ch)/160.0 ms (1 ch) 21 megapixel mode: 28.9 (4 ch)/39.2 ms (2 ch)/83.3 ms (1 ch) ^*2
Pixel transfer frequency		1085 MHz
Transfer system		Digital serial transfer
Electronic shutter		Can be set to 0.05 to 9000 msec by specifying the following numerical inputs: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000
Lens mount		Special mount (M40 P0.75)^*3
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	85% RH or less
Weight		Approx. 350 g (not including lens)
^1 Equivalent to 4/3" (ø23 mm ø0.91") in 41 megapixel mode, and 1" (ø16 mm ø0.63") in 21 megapixel mode. ^2 Transfer time varies depending on the channel configuration. ^*3 C-mount lenses can be used by replacing the lens mount on the camera with a C-mount adapter (OP-88578; sold separately). Note that 64 megapixel mode will not be supported.

Keyence EM-005A Keyence

$345.00

Only 1 unit left

Specifications

Model		EM-005A^*1
Type		Shielded
Shape		M5 Threaded
Detecting distance		1.0 mm 0.04" ±15%
Detectable object		Ferrous metals (see Characteristics for non-ferrous metals)
Standard target (iron, t=1 mm 0.04")		5 x 5 mm 0.20"
Hysteresis		10% max. of detecting distance
Response frequency		1.2 kHz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at +23°C 73.4°F, within -10 to +70°C 14 to 158°F
Display indicator		Red LED
Control output		NPN: 200 mA (40 V) max., Residual voltage: 1 V max.
Housing		Stainless steel
Rating	Power voltage	10.8 to 30 VDC, Ripple (P-P) 10 % or less^*2
	Current consumption	12 mA or less
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
Weight		Approx. 40 g (including nuts and 2-m 6.6' cable)
^1 The alternate-frequency type of EM-005 ^2 Make sure that the power voltage stays within 10.8 V to 30 V even if it is affected by ripple effects.

Keyence OP-77680 Keyence

$0.00

Sold Out

Specifications

Model				OP-77680
Applicable product				GT Series/GT2 Series
Note				Roller type. (sold separately) This can be used when the detection target is moving.

Keyence OP-51428 Keyence

$0.00

Sold Out

Specifications

Model				OP-51428
Overview				Reflective tape used with polarized retro-reflective laser sensor (50x15mm).
Applicable product				LV-H64, LV-H65
Material				Polycarbonate, Acrylic adhesive

Keyence RT-13 Keyence

$1,801.70

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence XC-T20E2 Keyence

$0.00

Sold Out

Specifications

Model		XC-T20E2
Rated voltage		125 VAC/DC
Rated current		1 A/pin
Ambient operating temperature		−40 to +80°C −40 to +176°F
Screw torque		0.5 N·m (max.)
Applicable wire diameter		AWG24 to 12
Environmental resistance	Insulation resistance	500 VDC, 500 MΩ or greater
	Withstand voltage	500 VAC, 1 minute, 1 mA or less

Keyence FD-M50AYP Keyence

$2,769.50

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence BL-650HA Keyence

$1,121.31

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV2-B010AK Keyence

$0.00

Sold Out

Specifications

Model				SV2-B010AK
General specifications	Applicable servo amplifier			SV2-010L2
	Rated output			100 W
	Rated torque			0.318 N·m ^*1
	Instant maximum torque			1.11 N·m
	Rated current			0.85 Arms
	Instant maximum current			3.1 Arms
	Rated rotation speed			3000min^-1
	High rotation speed			6000 min^-1
	Torque constant			0.413 N·m/Arms
	Rotor moment of inertia			0.0739 ×10^-4kg·m²
	Rated power rating			15.3 kW/s
	Rated angle acceleration			48200 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (3 directions: up/down, left/right, forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			UL: phase A, CE: phase B
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			35 ×
	Approx. weight			0.7 kg
Electromagnetic brake specifications	Capacity			5.5 W
	Rated voltage			24 VDC ±10%
	Rated current (@20°C 68°F)			0.23 A
	Holding torque			0.318 N·m
	Release time			60 ms ^*2
	Operating time			100 ms ^*2
^1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink. ^2 The release time and operation time of the electromagnetic brake vary depending on the discharge circuit.

Keyence SV2-B040AK Keyence

$769.62

Only 1 unit left

Specifications

Model				SV2-B040AK
General specifications	Applicable servo amplifier			SV2-040L2
	Rated output			400 W
	Rated torque			1.27 N·m ^*1
	Instant maximum torque			4.46 N·m
	Rated current			2.5 Arms
	Instant maximum current			9.3 Arms
	Rated rotation speed			3000min^-1
	High rotation speed			6000 min^-1
	Torque constant			0.544 N·m/Arms
	Rotor moment of inertia			0.556 ×10^-4kg·m²
	Rated power rating			33.1 kW/s
	Rated angle acceleration			26100 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (3 directions: up/down, left/right, forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			UL: phase A, CE: phase B
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			10 ×
	Approx. weight			1.7 kg
Electromagnetic brake specifications	Capacity			6 W
	Rated voltage			24 VDC ±10%
	Rated current (@20°C 68°F)			0.25 A
	Holding torque			1.27 N·m
	Release time			60 ms ^*2
	Operating time			100 ms ^*2
^1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink. ^2 The release time and operation time of the electromagnetic brake vary depending on the discharge circuit.

Keyence OP-51580 Keyence

$130.04

Only 8 units left

Specifications

Model				OP-51580
Type				MiniB USB Cable
Length				2 m 6.56'
Note				Included with the NR-600/NR-500.

Keyence EX-V64E Keyence

$0.00

Sold Out

Specifications

Model		EX-V64E
Type		Controller
Shape		14 x 30 x 4.8 mm 0.55" x 1.18" x 0.19" Thin profile
Measuring range		0 to 4 mm 0.16"
Display range		-19,999 to +19,999
Linearity		±0.3% of F.S.
Resolution (No. of averaging measurements: 64)		1 µm
Sampling rate		40,000 samplings max./sec. ^*1
Display speed		20 times/sec. (2-color, 7-segment LED)
Display power		7-segment 2-color LED
Over-range alarm		±FFFF is displayed.
Control input	Timing input	NPN open-collector or non-voltage contact signal
	Reset input
	Auto-zero input
	Judgment output: Inhibit input
	Synchronization/external settings input
Control output	Setting method	Upper/lower 2-level setting x 4 patterns (selectable)
	Signal	NPN open-collector (HIGH, GO and LOW): 100 mA max. (40 V max.)
	Response time	0.075 ms (at maximum speed)
	OFF-delay time	60 ms (ON/OFF selectable)
Strobe output		NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.O.)
Alarm output		NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.C.)
Analog output voltage	Output voltage	±5V
	Impedance	100 Ω
	Response time	0.075 ms (at maximum speed)
Temperature characteristics		0.07% of F.S./°C ^*2
Major functions		FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc.
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption	240 mA or less
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 235 g
^1 When the digital filter function is used, the sampling rate is 20,000 sampling/sec. ^2 When the distance between the sensor head and the target is within 50% of the measuring range.

Keyence XR-AP1 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-21448 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence MD-C2BU Keyence

$0.00

Sold Out

Specifications

Model				MD-C2BU
Category				Cat.4 PLe
PFH_d				7.77 × 10^-8^*1
B10_d				20,000,000^*2
^1 This value is valid up to 5.6 million laser safety module operations per year. ^2 Replace the laser safety module before the laser safety module performs 20 million cycles.

Keyence XG-7701 Keyence

$1,790.75

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-S035CU (CV-S035C) Keyence

$0.00

Sold Out

Specifications

Model		CV-S035CU
Type		Camera^*1
Image element		1/3 -inch color CCD image receiving element, 2 x high-speed reading using square-pixel, 350,000 pixels Unit cell size: 7.4 x 7.4 µm 0.29 x 0.29 Mil
Valid pixel count		320,000 pixels 656 (H) x 492 (V) ^*2
Pixel transfer frequency		24.5 MHz
Scanning system		Progressive (16 ms)
Transfer system		Digital serial transfer
Electronic shutter		1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 msec to 9000 msec can be set with numeric values.
Lens mount		Special mount (M10.5 P0.5 male)
Environmental resistance	Ambient temperature	Head: 0 to +50 °C 32 to 122 °F, relay unit: 0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Head: Approx. 160 g (including the cable, not the lens) Relay unit: Approx. 70 g
^1 The CA-CN17 camera cable (17 m 55.8') and the CA-CN17R high-flex camera cable (17 m 55.8') cannot be used. ^2 In 310,000-pixel mode, 310,000 pixels (640 x 480) serve as the processing area. In 240,000-pixel mode, 240,000 pixels (512 x 480) serve as the processing area.

Keyence OP-51603 Keyence

$0.00

Sold Out

Specifications

Model				OP-51603
Type				Polarisation filter
Note				For the 25.5 mm filter size

Keyence AP-10S Keyence

$866.54

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88877 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-R12L Keyence

$2,662.20

Only 3 units left

Specifications

Model			GL-R12L
Detection capability			ø1.77" ø45 mm
Total length			18.90" 480mm
No. of beam			12
Detection height			17.32" 440mm
Protection height			20.67" 525mm
Beam axis spacing/Lens diameter			40 mm / ø5 1.57" / ø0.20"
Detecting distance			0.66 to 49.21' 0.2 to 15 m^*1
Effective aperture angle			Max. ±2.5° (When operating distance is 9.84' 3 m or more)
Light source			Infrared LED (870 nm)
Response time (OSSD) (ms)	Wire synchronization, One-line or Optical synchronization system (Channel 0)	ON→OFF	6.6
		OFF→ON	48.7^*2
		All blocked→ON	63.1^*3
	Optical synchronization system (Channel A or B)	ON→OFF	7.4
		OFF→ON	49.9^*2
		All blocked→ON	66.3^*3
Detection mode			Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver			Optical synchronization or Wire synchronization (Determined by wiring)
Light interference prevention function			Prevents mutual interference in up to two GL-R systems. Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output		2 transistor outputs. (PNP or NPN is determined by the cable type)
	Max. load current		500 mA^*4
	Residual voltage (during ON)		Max. 2.5 V (with a cable length of 16.40' 5 m)
	OFF state voltage		Max. 2.0 V (with a cable length of 16.40' 5 m)
	Leakage current		Max. 200 µA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
Supplemental output (Non-safety-related output)	AUX		transistor outputs. (PNP or NPN is determined by the cable type) Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m)
	Error output
	Muting lamp output		Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected.
External input	When using a PNP output cable	EDM input Wait input Reset input Muting input 1, 2 Override input	ON voltage: 10 to 30 V OFF voltage: Open or 0 to 3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
	When using an NPN output cable		ON voltage: 0 to 3 V OFF voltage: Open or 10 V or more Up to the power voltage Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
Power supply	Power voltage		24 VDC ±20%, ripple (P-P) 10% or less, Class 2
	Current consumption (Max.) (mA)	Transmitter	46
		Receiver	70
Protection circuit			Reverse current protection, short-circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety		IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1:2015 (Category 4, PLe) UL508 UL1998
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Overvoltage category		II
	Ambient light		Incandescent lamp: 3,000 lux or less., Sunlight: 20,000 lux or less
	Operating ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)
	Operating relative humidity		15 to 85 % RH (No condensation)
	Storage temperature		-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity		15 to 95 % RH
	Vibration resistance		10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance		100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case		Aluminum
	Upper case/lower case		Nylon (GF 30%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		660 g
	Receiver
^1 When the option front protection cover is installed on the one of transmitter or receiver, the Operating distance is shorten by 1.64' 0.5 m. When the front covers are installed on both of the transmitter and receiver, the Operating distance is shorten by 3.28' 1.0 m. ^2 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3 “All blocked” means the situation where the GL-R operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-R synchronizes the transmitter and receiver fi rst and then determines the clear or blocked. ^4 When the GL-R is used under surrounding air temperatures between 50 to 55°C 122°F to 131°F, the Maximum load current should not exceed 350 mA.

Keyence SI-F1003V Keyence

$0.00

Sold Out

Specifications

Model			SI-F1003V
Separate type			SI-F1003/SI-FD500
Type			Built-in main controller type
No. of connectable spectrum units			2
Display	Minimum display unit		0.001 µm
	Display range		±999.999 µm to ±9999.99 mm (7 settings selectable)
	Display cycle		10 times/sec.
Terminal block	Laser remote interlock input		Non-voltage input^*1
	TIMING1 input
	RESET1 input
	Auto-zero1 input
	Laser control input
	Analog voltage output		±10 V x 2 outputs, Output impedance: 100 Ω^*1
	Analog current output		4 to 20 mA x 2 outputs, Maximum load resistance: 350 Ω^*1
	Alarm output		NPN open-collector output (N.C.)^*1
	General comparator output		NPN open-collector output^*1
Expansion connector	TIMING2 input		Non-voltage input^*1
	RESET input
	Auto-zero input
	Program switch input		Non-voltage input x 3 inputs^*1
	Alarm output		NPN open-collector output (N.C.)^*1
	Comparator/ binary output	Binary output	Measured value data output (21 bits) OUT selectable NPN open-collector output^*1
		Strobe output	NPN open-collector output^*1
		Binary selection output
		Binary selection input	Non-voltage input^*1
RS-232C interface			Measured data output and control input/output (Baud rate selectable to 115,200 bps max.)
USB interface			USB 2.0 high speed compliant (USB 1.1 Full-SPEED compatible)
Ethernet interface			100Base-TX/10Base-T
Major functions			12 Out simultaneous measurement calculation, average, filter, scaling measurement, measured value alarm, tolerance setting, auto-zero, data storage, light monitor, 8-program memory, interferometer mode, mask, connection of setting support software, etc.
Rating	Power voltage		24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption		One head connected: 0.6 A or less. Six heads connected: 1.5 A or less.
Environmental resistance	Ambient temperature		0 to +50 °C 32 to 122 °F^*2
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 0.5 mm 0.02", 2 hours in each of the X, Y, and Z directions
Weight			Approx. 600 g
^1 • NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. • Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max. • Part of the input/output circuit of the SI Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to "Precautions on wiring". ^2 When two or more expansion controllers are connected, the ambient temperature is 0 to +40 °C 32 to 104 °F.