1 year warranty
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Altistart 48 |
| Product or component type | Soft starter |
| Product destination | Asynchronous motors |
| Product specific application | Heavy duty industry and pumps |
| Device short name | ATS48 |
| Utilisation category | AC-53A |
| Ue power supply voltage | 208...690 V - 15...10 % |
| power supply frequency | 50...60 Hz - 5...5 % |
| Motor power kW | 22 kW at 230 V for standard applications 37 kW at 400 V for severe applications 37 kW at 440 V for severe applications 45 kW at 400 V for standard applications 45 kW at 440 V for standard applications 45 kW at 500 V for severe applications 45 kW at 525 V for severe applications 55 kW at 500 V for standard applications 55 kW at 525 V for standard applications 55 kW at 660 V for severe applications 55 kW at 690 V for severe applications 75 kW at 660 V for standard applications 75 kW at 690 V for standard applications 18.5 kW at 230 V for severe applications |
| Motor power hp | 20 hp at 208 V for severe applications 25 hp at 208 V for standard applications 25 hp at 230 V for severe applications 30 hp at 230 V for standard applications 50 hp at 460 V for severe applications 60 hp at 460 V for standard applications 60 hp at 575 V for severe applications 75 hp at 575 V for standard applications |
Complementary
| Characteristic | Value(s) |
|---|---|
| Device connection | To the motor delta terminals In the motor supply line |
| Protection type | Phase failure: line Thermal protection: motor Thermal protection: starter |
| Standards | IEC 60947-4-2 |
| Product certifications | DNV UL CCC CSA GOST C-Tick SEPRO TCF NOM 117 |
| Marking | CE |
| Discrete input number | 5 |
| Discrete input type | PTC, 750 Ohm at 25 °C (Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm |
| Discrete input logic | Positive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA |
| Minimum switching current | 10 mA at 6 V DC for relay outputs |
| Discrete output number | 2 |
| Discrete output type | (LO1) logic output 0 V common configurable (LO2) logic output 0 V common configurable (R1) relay outputs fault relay NO (R2) relay outputs end of starting relay NO (R3) relay outputs motor powered NO |
| Analogue output type | Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm |
| Communication port protocol | Modbus |
| Connector type | 1 RJ45 |
| Communication data link | Serial |
| Physical interface | RS485 multidrop |
| Transmission rate | 4800, 9600 or 19200 bps |
| Function available | External bypass (optional) |
| Operating position | Vertical +/- 10 degree |
| Height | 290 mm |
| Width | 190 mm |
| Depth | 235 mm |
| Product weight | 8.3 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Altistart 01 |
| Product or Component Type | Soft starter |
| Product destination | Asynchronous motors |
| Product Specific Application | Simple machine |
| Device short name | ATS01 |
| Phase | 3 phase |
| [Us] rated supply voltage | 400 V - 15...10 % |
| Motor power kW | 22 kW, 3 phase 400 V |
| Maximum Horse Power Rating | 25 hp, 3 phase 400 V |
| IcL starter rating | 44 A |
| Utilisation category | AC-53B EN/IEC 60947-4-2 |
| Current consumption | 132 A at nominal load |
| Type of start | Start with voltage ramp |
| Power dissipation in W | 22 W at full load and at end of starting 268 W in transient state |
Complementary
| Characteristic | Value(s) |
|---|---|
| Assembly style | With heat sink |
| Function Available | Integrated bypass |
| Supply voltage limits | 340â¦440 V |
| Supply frequency | 50...60 Hz - 5...5 % |
| Network Frequency | 47.5...63 Hz |
| Output voltage | <= power supply voltage |
| [Uc] control circuit voltage | Built into the starter |
| Starting time | 1 s / 360 12 s / 30 Adjustable from 1 to 25 s |
| Deceleration time symb | Adjustable from 1 to 25 s |
| Starting torque | 30...80 % of starting torque of motor connected directly on the line supply |
| Discrete input type | Internal LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA |
| Discrete input voltage | 24 V |
| Discrete input logic | Positive logic LI1, LI2, BOOST <= 3 V >= 10 V |
| Discrete output current | 2 A DC-13 3 A AC-15 |
| Discrete output type | Relay outputs R1A, R1C |
| Discrete output voltage | 24 V DCrelay outputs 250 V ACrelay outputs |
| Minimum switching current | 10 mA 17 V DC relay outputs |
| Display type | 1 LED Green)starter powered up 1 LED Yellow)nominal voltage reached |
| Tightening torque | 44.3 lbf.in (5 N.m) 6.2 lbf.in (0.7 N.m) |
| Electrical connection | Earth connection: tinned connector fixed using à 6 mm screws 4 mm screw clamp terminal - rigid with cable end 1 6...35 mm² power circuit Screw connector - rigid with cable end 1 0.75...1.5 mm² control circuit 4 mm screw clamp terminal - rigid without cable end 2 6...25 mm² power circuit Screw connector - rigid without cable end 2 0.75...1.5 mm² control circuit 4 mm screw clamp terminal - flexible with cable end 1 4...25 mm² power circuit Screw connector - flexible with cable end 1 0.75...1.5 mm² control circuit 4 mm screw clamp terminal - flexible without cable end 1 6...25 mm² power circuit Screw connector - flexible without cable end 1 0.75...1.5 mm² control circuit 4 mm screw clamp terminal - flexible with cable end 2 4...16 mm² power circuit Screw connector - flexible with cable end 2 0.75...1.5 mm² control circuit 4 mm screw clamp terminal - flexible without cable end 2 6...25 mm² power circuit Screw connector - flexible without cable end 2 0.75...1.5 mm² control circuit |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Height | 5.7 in (146 mm) |
| Width | 7.09 in (180 mm) |
| Depth | 5.0 in (126 mm) |
| Product Weight | 5.3 lb(US) (2.4 kg) |
| Compatibility code | ATS01N2 |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Altistart 01 |
| Product or Component Type | Soft starter |
| Product destination | Asynchronous motors |
| Product Specific Application | Simple machine |
| Device short name | ATS01 |
| Phase | 3 phase |
| [Us] rated supply voltage | 230...690 V - 15...10 % |
| Motor power kW | 11 kW, 3 phase 230 V 22 kW, 3 phase 400 V 37 kW, 3 phase 690 V |
| Maximum Horse Power Rating | 15 hp, 3 phase 230 V 25 hp, 3 phase 400 V 30 hp, 3 phase 460 V 40 hp, 3 phase 575 V |
| IcL starter rating | 44 A |
| Utilisation category | AC-53B EN/IEC 60947-4-2 |
| Current consumption | 132 A at nominal load |
| Type of start | Start with voltage ramp |
| Power dissipation in W | 22 W at full load and at end of starting 268 W in transient state |
Complementary
| Characteristic | Value(s) |
|---|---|
| Assembly style | With heat sink |
| Function Available | Integrated bypass |
| Supply voltage limits | 195â¦759 V |
| Supply frequency | 50...60 Hz - 5...5 % |
| Network Frequency | 47.5...63 Hz |
| Output voltage | <= power supply voltage |
| [Uc] control circuit voltage | 110 V AC +/- 10 % |
| Starting time | 1 s / 360 12 s / 30 Adjustable from 1 to 25 s |
| Deceleration time symb | Adjustable from 1 to 25 s |
| Starting torque | 30...80 % of starting torque of motor connected directly on the line supply |
| Discrete input type | Internal LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA |
| Discrete input voltage | 24 V |
| Discrete input logic | Positive logic LI1, LI2, BOOST <= 3 V >= 10 V |
| Discrete output current | 2 A DC-13 3 A AC-15 |
| Discrete output type | Relay outputs R1A, R1C |
| Discrete output voltage | 24 V DCrelay outputs 250 V ACrelay outputs |
| Minimum switching current | 10 mA 17 V DC relay outputs |
| Display type | 1 LED Green)starter powered up 1 LED Yellow)nominal voltage reached |
| Tightening torque | 6.2 lbf.in (0.7 N.m) 44.3 lbf.in (5 N.m) |
| Electrical connection | Earth connection: tinned connector fixed using à 6 mm screws 4 mm screw clamp terminal - rigid with cable end 1 6...35 mm² power circuit Screw connector - rigid with cable end 1 0.75...1.5 mm² control circuit 4 mm screw clamp terminal - rigid without cable end 2 6...25 mm² power circuit Screw connector - rigid without cable end 2 0.75...1.5 mm² control circuit 4 mm screw clamp terminal - flexible with cable end 1 4...25 mm² power circuit Screw connector - flexible with cable end 1 0.75...1.5 mm² control circuit 4 mm screw clamp terminal - flexible without cable end 1 6...25 mm² power circuit Screw connector - flexible without cable end 1 0.75...1.5 mm² control circuit 4 mm screw clamp terminal - flexible with cable end 2 4...16 mm² power circuit Screw connector - flexible with cable end 2 0.75...1.5 mm² control circuit 4 mm screw clamp terminal - flexible without cable end 2 6...25 mm² power circuit Screw connector - flexible without cable end 2 0.75...1.5 mm² control circuit |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Height | 5.7 in (146 mm) |
| Width | 7.09 in (180 mm) |
| Depth | 5.0 in (126 mm) |
| Product Weight | 5.3 lb(US) (2.4 kg) |
| Compatibility code | ATS01N2 |
This ABLS regulated switch mode power supply (SMPS) supplies direct current voltage. It has a rated input of 100V to 240V AC and 140 V to 340 V DC, a rated output current of 20A at 24V DC and a rated power output of 480W. It is ideal for supplying DC voltage necessary for automation equipment designed for applications in industrial, commercial and residential applications such as conveying, packaging, control, food & beverage, mining, oil & gas and water. It installs on omega rail or fixing by screw. Its width is 85,5mm, its height is 123,6mm, its depth is 128,5mm. It ensures a protection against overloads and short-circuits with automatic restart after the source of overload/short-circuit has been corrected. It weighs 1.250kg. It is a power supply for industrial use, rail mounting. It conforms to EN62368-1, ENIEC61010-1/2-201, ENIEC61204-3, EN61000-6-1/2/3/4, EN61000-3-2-3, UL62368-1, UL61010-2-201/-1-201, CSAC22.2No62368-1/No61010-2-201/No61010-1 standards, and certified by CE, CUL listed/recognized, RCM, CBscheme. The Acti9 iC60 range of Miniature Circuit Breakers is recommanded for its protection. The type of protection is 13A, C curve or 16A, B-curve. It has in the front face a LED indicating presence of DC output voltage, and a QR code for access to the latest technical documentation. Thanks to its book housing, it can be installed either in enclosures or industrial panels by clipping on omega (DIN) rail. It brings energy to your automated systems. Designed for simple machines and applications, modular power supplies are primarily appreciated for their extreme compactness.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Power Supply |
| Product or Component Type | Power supply |
| Power supply type | Regulated switch mode |
| Variant option | Optimized |
| Enclosure Material | Aluminum |
| Nominal input voltage | 100...240 V AC single phase 100...240 V AC phase to phase 140...340 V DC |
| Kw Rating | 480 W |
| Output voltage | 24 V DC |
| Power supply output current | 20 A |
Complementary
| Characteristic | Value(s) |
|---|---|
| Efficiency at full load | 85...264 V AC without temperature derating 120...375 V DC without temperature derating |
| Nominal network frequency | 50â¦60 Hz |
| Network system compatibility | TN TT IT |
| Maximum leakage current | 1 mA 240 V AC |
| Input protection type | Integrated fuse (not interchangeable) 10 A External protection (recommended) 20 A Curve C External protection (recommended) 16 A Curve B External protection (recommended) 13 A Curve C |
| Inrush current | 45.0 A 115 V 90.0 A 230 V |
| Power factor | 0.95 at 115 V AC 0.95 at 230 V AC |
| Efficiency | 85 % 115 V AC 88 % 230 V AC |
| Output voltage adjustment | 22...28 V |
| Power dissipation in W | 60 W |
| Current consumption | < 5.4 A 115 V AC < 2.7 A 230 V AC < 5 A 140 V DC |
| Turn-on time | < 1.5 s |
| Holding time | > 20 ms 115 V AC > 20 ms 230 V AC |
| Startup with capacitive loads | 8000 µF |
| Residual ripple | < 120 mV |
| Meantime between failure [MTBF] | 700000 h at 77 °F (25 °C), full load conforming to SR 332 |
| Output protection type | Against overload and short-circuits, protection technology: automatic reset Against over temperature, protection technology: manual reset Against overvoltage, protection technology: manual reset |
| Connections - terminals | Screw connection 0.75...4 mm², AWG 20...AWG 12) without wire end ferrule output Screw connection 0.75...4 mm², AWG 20...AWG 14) with wire end ferrule output Screw connection 0.75...4 mm², AWG 18...AWG 12) without wire end ferrule input Screw connection 0.75...4 mm², AWG 18...AWG 12) with wire end ferrule input |
| Line and load regulation | < 0.5 % network 0 to 100 % load at 77 °F (25 °C) < 1 % network full voltage range in line at 77 °F (25 °C) |
| Status LED | 1 LED (Green) output voltage |
| Depth | 5.06 in (128.5 mm) |
| Height | 4.9 in (123.6 mm) |
| Width | 3.4 in (85.5 mm) |
| Product Weight | 2.76 lb(US) (1.25 kg) |
| Output coupling | Parallel Serial |
| Mounting support | Top hat type TH35-15 rail IEC 60715 Top hat type TH35-7.5 rail IEC 60715 Double-profile DIN rail |
| Supply | SELV IEC 60950-1 SELV IEC 60204-1 SELV IEC 60364-4-41 |
| Dielectric strength | 3000 V AC with input to output |
| Service life | 10 year(s) |
| Overvoltage category | II |
