Protocol Gateway Modules

$0.00

Sold Out

The ProLinx Modbus TCP/IP to PROFIBUS DP Master Gateway creates a powerful connection between devices on a Modbus TCP/IP network and a PROFIBUS slave device. This stand-alone DIN-rail mounted protocol gateway provides one Ethernet port and PROFIBUS DP Master configurable DB-9F port. The Modbus TCP/IP protocol driver can interface many different protocols into Schneider Electric Quantum processors as well other solutions supporting the protocol. The MNET driver supports Client and Server connections, and when coupled with the Web option provides a web/ftp interface as well. The PROFIBUS DP Master protocol driver supports complete Master specifications according to IEC 61158 on either a Mono-Master or Multi-Master network. The module supports the DPV1 specification.

Prosoft 3170-MBS Prosoft

$1,537.00

Only 2 units left

The MVI94 Modbus Slave Network Interface Adapter can interface up to 8 Rockwell Automation FLEX and/or Integra I/O modules directly with any Modbus Master.

Prosoft C19M10-80-005 Prosoft

$0.00

Sold Out

ProSoft Technology supplies cables that provide the lowest attenuation and are pre-cut and assembled with connectors at the factory to ensure ultimate reliability and customer satisfaction. LMR 195 Cables are ideal for jumper assemblies in wireless communication systems and short antenna feed runs.

Prosoft ILX34-MBS232 Prosoft

$0.00

Sold Out

ProSoft Technology’s ILX34-MBS232 module is ideal for point to point applications with a maximum distance of 50 feet away (15.2 meters) your processor. These include SCADA and field device interface applications. The module can be used in CompactLogix L1 processors or Distributed 1734 Point I/O systems. In addition, the module can be configured as a Master or Slave.

Prosoft MVI56-DNPSNET Prosoft

$3,878.09

Only 6 units left

The DNP 3.0 Ethernet Server Network Interface Module allows ControlLogix processors to interface with the many field devices that support the DNP protocol over Ethernet. DNP (Distributed Network Protocol) is an open communication protocol developed to achieve interoperability among systems specifically in the electric utility, oil & gas and water/wastewater industries. This non-proprietary protocol, available worldwide, was designed to optimize the transmission of data acquisition information and control commands. It is a highly efficient and reliable communications protocol between substation computers, RTUs, IEDs and master stations. DNP is also a layered protocol, featuring time stamping and True Report by Exception (TRBE). These features allow the MVI56-DNPSNET module to send a report to the processor without being polled, providing real time data transmission in critical situations.

Prosoft MVI69-N2 Prosoft

$559.98

Only 4 units left

Buy the ProSoft Technology MVI69-N2 - a genuine ProSoft Technology industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The ProSoft Technology MVI69-N2 is a direct drop-in replacement for existing installations and ships ready for integration.

Prosoft RLX2-IHNF-E Prosoft

$0.00

Sold Out

The ProSoft Technology Fast Industrial Hotspot (RLX2-IHNF) provides secure wireless solutions for plant-floor, SCADA automation, process control systems and mobile worker Wi-Fi infrastructure. It operates in the 2.4 or 5 GHz bands, including DFS channels, and is good for applications up to 2 mi. / 3.2 km.The Hotspot supports Access Point, Repeater, and Client modes. 802.11n technology delivers fast data rates up to 300 Mbps. This provides excellent packet-per-second performance and robust communications in rugged industrial environments. The 802.11n MIMO & Channel bonding supports demanding wireless applications such as Ethernet I/O and high-resolution video.The included IH Browser configuration and monitoring software allows the user to view network topology, assign IP addresses, monitor network diagnostics, and update radio firmware. The optional OPC Diagnostic Server is ideal for managing long-range wireless SCADA networks.

Prosoft 3100-LTQ Prosoft

$4,133.17

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Prosoft PLX32-EIP-MBTCP-UA Prosoft

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Prosoft MVI71-DNP Prosoft

$0.00

Sold Out

The MVI71 DNP 3.0 Master/Slave Communication Module is a single slot, backplane compatible DNP 3.0 interface solution for the PLC platform. This module provides highly configurable support of both DNP 3.0 Master and Slave implementations (level 2 minimum), allowing the many SCADA and field devices supporting the DNP protocol to be integrated into the powerful PLC platform.

Prosoft MVI71-GSC Prosoft

$10,924.74

Only 4 units left

The Generic Serial ASCII Network Interface Module is a fast and easy way to add two fully configurable ASCII communication ports to the PLC platform without consuming the front port of the processor. This allows the PLC processor to interface with any generic ASCII device such as bar code scanners, weigh scale interfaces, legacy ASCII protocol connections, terminal port emulation and printer drivers. Each port supports the sending and receiving of large ASCII character strings and is individually configurable.

Prosoft MVI71-HART Prosoft

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Prosoft MVI46-GEC Prosoft

$2,463.74

Only 3 units left

The Generic ASCII Ethernet Network Interface Module (MVI46-GEC) allows SLC processors to connect to any generic ASCII device such as bar code scanners, weigh scale interfaces, legacy ASCII protocol connections, terminal port emulation and printer drivers. The use of the TCP/IP protocol at the device level on the plant floor has become widespread. The MVI46-GEC takes advantage of Ethernet’s speed while also allowing greater distances between networked devices.

Prosoft MVI46-MNET Prosoft

$5,950.00

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Prosoft MVI71-DFCM Prosoft

$3,417.80

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Prosoft MVI56E-DNPSNET Prosoft

$1,602.24

Only 4 units left

Buy the ProSoft Technology MVI56E-DNPSNET Communication Module - an industrial network interface providing controller-to-device connectivity. Supports standard industrial protocols for seamless automation integration. The ProSoft Technology MVI56E-DNPSNET is a direct replacement for existing communication installations.

Prosoft 5205-MNET-PDPS Prosoft

$760.00

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Prosoft MVI69-GSC Prosoft

$1,793.71

Only 1 unit left

The MVI69-GSC Generic ASCII Serial Interface Module is a fast and easy way to add two fully configurable ASCII communication ports to the CompactLogix / MicroLogix platform without consuming the front port of the processor, or using valuable processing time. The MVI69-GSC module is a single-slot, backplane-compatible solution for the CompactLogix / MicroLogix platform. This module has two powerful and fully configurable ASCII communication ports, each supporting the sending and receiving of large ASCII character strings. With the implementation of some supporting ladder logic in the processor, the many different devices supporting ASCII communications can be integrated into the CompactLogix / MicroLogix platform.

Prosoft MVI56E-AFC Prosoft

$4,910.36

Only 1 unit left

ProSoft Technology’s in-chassis flow computer solution allows you to monitor gas and liquid meters for flow rates, accumulator values, and other calculation results. All alarm data is displayed on our configuration screens. This solution eliminates the need for multiple RTUs and standalone flow computers for a multi-well pad application. This solution reduces support and maintenance costs as well as helping to decrease your capital spend. This simplified solution allows you to optimize your resources. In addition, our flow computer sits in a ControlLogix® system, allowing you to take advantage of Rockwell Automation’s distributed I/O capability and ProSoft’s wireless radios to greatly reduce wiring to your transmitters and I/O devices.

Prosoft MVI56E-GSC Prosoft

$6,144.60

Only 8 units left

The Generic ASCII Serial Enhanced Communication Modules allow Rockwell Automation ControlLogix Programmable Automation Controllers (PACs) to easily interface with serial devices using non-specific ASCII character text string or byte value serial communication protocols. MVI56E-GSC enhancements include local and remote diagnostics through the module's Ethernet port, CIPconnect technology for bridging through Rockwell Automation ControlNet and EtherNet/IP networks, and an on-board web server containing status information, module documentation, and sample program files. The MVI56E-GSC module is a fast and easy way to add two fully configurable serial communication ports to the ControlLogix platform, eliminating the need to use the front port of the processor or to consume valuable processing time sending and receiving serial messages. The module is a single-slot, backplane-compatible solution. Each port is capable of sending and receiving large ASCII character strings or byte streams of up to 4096 characters or bytes. Many different serial communication devices can be integrated into the ControlLogix platform by building upon the sample ladder logic provided for this module.

Prosoft ICX30-HWC Prosoft

$813.96

Only 5 units left

Buy the ProSoft Technology ICX30-HWC - a genuine ProSoft Technology industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The ProSoft Technology ICX30-HWC is a direct drop-in replacement for existing installations and ships ready for integration.

Prosoft MVI56-MCMR Prosoft

$2,303.33

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Prosoft MVI56E-MNETCR Prosoft

$5,801.59

Only 1 unit left

The MVI56E Modbus TCP/IP Multi Client Enhanced Communication Module for Remote Chassis allows Rockwell Automation ControlLogix Programmable Automation Controllers (PACs) to interface easily with multiple Modbus TCP/IP server-compatible instruments and devices. The Multi Client module improves performance when controlling multiple servers on a Modbus TCP/IP network, by supporting up to 30 clients. MVI56E enhancements include configuration and management through the module Ethernet port, CIPconnect technology for bridging through ControlNet and EtherNet/IP networks, and has a web server to access on-board documentation, Add-On Instructions, and sample program files. This module uses a small I/O data image for transfer of data between the module and the ControlLogix processor, making it ideal for ControlNet or Ethernet applications with the module in a remote rack.

Prosoft ICX35-HWC-E Prosoft

$3,479.00

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.