Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Modicon STB distributed I/O solution |
| Product or component type | Auxiliary power supply |
| Product specific application | Supply for logic of I/O module |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Us] rated supply voltage | 24 V |
| Supply circuit type | DC |
| Supply voltage limits | 19.2â¦30 V |
| Input current | 400 mA |
| Output voltage | 5.25 V +/- 0.21 % logic bus |
| Output voltage type | DC |
| Power supply output current | 1.2 A |
| Electrical connection | 2 pins for removable connector for power supply |
| Marking | CE |
| Overvoltage category | II |
Modicon STB - auxiliary power supply kit - for logic of I/O module
KNX power supply REG-K/640 mA with emergency power input, light grey
KNX power supply REG-K/320 mA with emergency power input. For generating the bus voltage for a line with up to 64 bus devices. The emergency power supply REG can be connected in order to buffer the bus voltage. With integrated choke to decouple the power supply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal. a data rail is not necessary. Nominal voltage: AC 110-230 V ±10%. Operating voltage: min. AC 92 V - max. AC 253 V. Mains frequency: 50-60 Hz ±10%. Output voltage: DC 30 V. Output current: max. 320 mA, short-circuit-proof. Device width: 4 modules, approx. 72 mm. Contents: With bus connecting terminal and cable cover. Colour: light grey.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | KNX |
| Product or component type | Power supply |
| Bus type | KNX |
| Additional information | With integrated choke |
Complementary
| Characteristic | Value(s) |
|---|---|
| total number of 18 mm modules | 4 |
| Mounting support | DIN rail |
| Network frequency | 50...60 Hz |
| Local signalling | LED |
| Input type | Emergency input |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Harmony iPC |
| Product or Component Type | External power supply module |
| Accessory / separate part category | Adaptation accessory |
Complementary
| Characteristic | Value(s) |
|---|---|
| Accessory / separate part destination | HMIBM modular box PC HMIDAD Harmony iPC |
| Input voltage | 110...240 V AC 47...63 Hz |
| Output Voltage | 24 V DC |
| Line Rated Current | 6.25 A |
| Range Compatibility | Harmony iPC |
| Width | 7.4 in (189 mm) |
| Height | 3.5 in (89.5 mm) |
| Depth | 1.8 in (45.5 mm) |
voltage transformer - 230..400 V - 2 x 115 V - 160 VA
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Harmony iPC |
| Product or Component Type | Battery |
| Accessory / separate part category | Spare part |
Complementary
| Characteristic | Value(s) |
|---|---|
| Accessory / separate part destination | 12" Harmony Panel PC |
| Product Weight | 11.02 lb(US) (5 kg) |
Power Supply module X80 - 100..240 V AC - for severe environments
This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This power supply module has an isolated primary voltage of 24V to 48V DC. It is a power supply module with a secondary power of 31.2W at 24V DC, a current at secondary voltage of 4.5A at 3.3V DC and a maximum power dissipation of 8.5W. This ruggedized product can be used in more severe environments, and operate in an extended temperature range, from -25°C to +70°C. It is furnished with 2-pin connector for alarm relay, 5-pin connector for line supply, protective earth for electrical connection. It is an IP20 rated product. It weighs 0.34kg. It is suitable for medium to large process applications. This product is certified by ATEX, IEC-Ex, CE, RCM, Merchant Navy, CSA, EAC, UL. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon X80 |
| Product or Component Type | Power supply module |
| backplane compatibility | Not compatible with BMEXBP..02 |
| Product Specific Application | For severe environments |
| Primary Voltage | 24...48 V isolated |
| Supply circuit type | DC |
| Secondary power | 15 W 3.3 V DC 32â¦140 °F (0â¦60 °C) I/O module logic power supply 31.2 W 24 V DC 32â¦140 °F (0â¦60 °C) I/O module power supply and processor 11.3 W 3.3 V DC -13â¦158 °F (-25â¦70 °C) I/O module logic power supply 23.4 W 24 V DC -13â¦158 °F (-25â¦70 °C) I/O module power supply and processor |
Complementary
| Characteristic | Value(s) |
|---|---|
| Primary voltage limit | 18...62.4 V |
| Input current | 0.83 A 48 V 1.65 A 24 V |
| Inrush current | 30 A 24 V 60 A 48 V |
| I²t on activation | 1 A².s 24 V 3 A².s 48 V |
| It on activation | 0.2 A.s 24 V 0.3 A.s 48 V |
| MTBF reliability | 4600000 H |
| Protection type | Internal fuse not accessible primary circuit Overload protection secondary circuit, 24 V sensor power supply Overvoltage protection secondary circuit, 24 V sensor power supply Short-circuit protection secondary circuit, 24 V sensor power supply |
| Current at secondary voltage | 1.3 A 24 V DC I/O module power supply and processor 4.5 A 3.3 V DC I/O module logic power supply |
| Maximum power dissipation in W | 8.5 W |
| Status LED | 1 LED (Green) rack voltage OK |
| Control Type | RESET push-button cold restart |
| Electrical connection | 1 connector 2 alarm relay 1 connector 5 line supply, protective earth |
| Maximum cable distance between devices | 32.8 ft (10 m) power supply cable copper 0.002 in² (1.5 mm²) 49.2 ft (15 m) power supply cable copper 0.004 in² (2.5 mm²) |
| Insulation resistance | >= 10 MOhm primary/ground >= 10 MOhm primary/secondary |
| Product Weight | 0.75 lb(US) (0.34 kg) |
This ABT7 transformer supplies alternating current to control circuits while isolating them from mains power. It has a rated input voltage of 230V to 400V AC, a rated output voltage of 115/230V AC thanks to its double secondary winding, and a rated power of 320VA. It offers an economic way to supply each consuming load individually, or by groups of loads, in applications such as mining, refining. It is ideal for systems accepting low voltage AC power, such as motor protection relays, contactors.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Modicon Transformer Universal |
| Product or component type | Safety and isolation transformer |
| Rated power in VA | 320 VA |
| Input voltage | 230 V AC single phase, terminal(s): N-L1 400 V AC phase to phase, terminal(s): L1-L2 |
| Output voltage | 115/230 V AC |
| Secondary winding | Double |
| Protective cover | With |
| Ambient air temperature for operation | -20â¦60 °C |
Complementary
| Characteristic | Value(s) |
|---|---|
| Input voltage limits | 360...440 V 207...253 V |
| Network frequency limits | 47â¦63 Hz |
| Input voltage tolerance | +/- 15 V |
| Efficiency | 91 % |
| Power dissipation in W | 31.6 W |
| Voltage variation at nominal load | 0,0286 at 230 V 0,0313 at 400 V |
| Output sustained overvoltage | 0,014 (no load, hot state) |
| Maximum voltage drop at rated load | 3.63 % |
| No load losses | 15.68 W |
| Short-circuit voltage | 0,068 |
| Output protection type | Against overload, protection technology: with additional protection fuses or circuit-breakers in Selection of Protection Against overvoltage, protection technology: with additional protection fuses or circuit-breakers in Selection of Protection Against short-circuits, protection technology: with additional protection fuses or circuit-breakers in Selection of Protection |
| Connections - terminals | For input connection: screw type terminals, connection capacity: 5 x 4 mm² AWG 11 For input ground connection: screw type terminals, connection capacity: 1 x 4 mm² AWG 11 For output connection: screw type terminals, connection capacity: 4 x 4 mm² AWG 11 |
| Marking | CE |
| Fixing mode | By 4 screws diameter: 6.5 mm on vertical panel, operating position: horizontal By 4 screws diameter: 6.5 mm on vertical panel, operating position: vertical By 4 screws diameter: 6.5 mm on horizontal panel with derating to 90 % |
| Output coupling | Parallel Series by internal jumper Grounding of secondary |
| Operating altitude | 3000 m |
| Electrical insulation class | Class B |
| Status LED | 1 LED (orange) input voltage |
| Width | 123.0 mm |
| Height | 152.0 mm |
| Depth | 159.0 mm |
| Product weight | 7.14 kg |
AS-P810-000 AS P810 CPS POWER SUPPLIES 984-AS-P810-000
This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This power supply module has a voltage of 125V DC for extended temperature. It is a power supply module with a secondary power of 31.2W at 24V DC, a current at secondary voltage of 4.5A at 3.3V DC and a maximum power dissipation of 8.5W. This product is robust, high quality and based on the latest innovative technology. It is furnished with 2-pin connector for alarm relay, 5-pin connector for line supply, protective earth, 24V DC input sensor for electrical connection. It is an IP20 rated product. It weighs 0.36kg. It is suitable for medium to large process applications. This product is certified by ATEX, IEC-Ex, CE, RCM, Merchant Navy, CSA, EAC, UL. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon X80 |
| Product or Component Type | Power supply module |
| backplane compatibility | Not compatible with BMEXBP..02 |
| Product Specific Application | Extended temperature |
| Primary Voltage | 125 V |
| Supply circuit type | DC |
| Secondary power | 15 W 3.3 V DC I/O module logic power supply 31.2 W 24 V DC I/O module power supply and processor |
Complementary
| Characteristic | Value(s) |
|---|---|
| Primary voltage limit | 100...150 V |
| Input current | 350 mA 125 V |
| Inrush current | 30 A 125 V |
| I²t on activation | 2 A².s 125 V |
| It on activation | 0.05 A.s 125 V |
| MTBF reliability | 4400000 H |
| Protection type | Internal fuse not accessible primary circuit Overload protection secondary circuit, 24 V sensor power supply Overvoltage protection secondary circuit, 24 V sensor power supply Short-circuit protection secondary circuit, 24 V sensor power supply |
| Current at secondary voltage | 1.3 A 24 V DC I/O module power supply and processor 4.5 A 3.3 V DC I/O module logic power supply |
| Maximum power dissipation in W | 8.5 W |
| Status LED | 1 LED (Green) rack voltage OK 1 LED (Green) sensor voltage |
| Control Type | RESET push-button cold restart |
| Electrical connection | 1 connector 2 alarm relay 1 connector 5 line supply, protective earth, 24 V DC input sensor |
| Insulation resistance | >= 100 MOhm primary/ground >= 100 MOhm primary/secondary |
| Product Weight | 0.79 lb(US) (0.36 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon X80 |
| Product or Component Type | Power supply module |
| backplane compatibility | All backplane |
| advanced diagnostics available via network | Uptime duration Temperature sensing Remaining lifetime Redundancy information Redundancy test |
| Primary Voltage | 125 V |
| Supply circuit type | DC |
| Secondary power | 18 W 3.3 V DC 32â¦140 °F (0â¦60 °C) I/O module logic power supply 40 W 24 V DC 32â¦140 °F (0â¦60 °C) I/O module power supply and processor if 3.3 V not loaded |
Complementary
| Characteristic | Value(s) |
|---|---|
| Primary voltage limit | 100...150 V |
| Input current | 600 mA 125 V |
| Inrush current | 60 A 125 V |
| I²t on activation | 2.5 A².s 125 V |
| It on activation | 0.09 A.s 125 V |
| MTBF reliability | 830000 H |
| Protection type | Internal fuse not accessible primary circuit Overload protection secondary circuit Overvoltage protection secondary circuit Short-circuit protection secondary circuit |
| Current at secondary voltage | 1.67 A 24 V DC I/O module power supply and processor 5 A 3.3 V DC I/O module logic power supply |
| Maximum power dissipation in W | 8.5 W |
| Status LED | 1 LED (Green) presence of voltages (OK) 1 LED (Green) redundancy OK 1 LED (Green) power supply status |
| Control Type | RESET push-button cold restart |
| Electrical connection | 1 connector 2 alarm relay 1 connector 5 line supply, protective earth |
| Insulation resistance | >= 100 MOhm primary/ground >= 100 MOhm primary/secondary |
| Product Weight | 1.34 lb(US) (0.61 kg) |
This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This power supply module has a primary voltage of 100V to 240V AC for severe environments. It is a power supply module with a secondary power of 31.2W at 24V DC, a current at secondary voltage of 4.5A at 3.3V DC and a maximum power dissipation of 8.5W. This ruggedized product can be used in more severe environments, and operate in an extended temperature range, from -25°C to +70°C. It is furnished with 2-pin connector for alarm relay, 5-pin connector for line supply, protective earth, 24V DC input sensor for electrical connection. It is an IP20 rated product. It weighs 0.36kg. It is suitable for medium to large process applications. This product is certified by ATEX, IEC-Ex, CE, RCM, Merchant Navy, CSA, EAC, UL. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon X80 |
| Product or Component Type | Power supply module |
| backplane compatibility | Not compatible with BMEXBP..02 |
| Product Specific Application | For severe environments |
| Primary Voltage | 100...240 V |
| Supply circuit type | AC |
| Secondary power | 15 W 3.3 V DC 32â¦140 °F (0â¦60 °C) I/O module logic power supply 31.2 W 24 V DC 32â¦140 °F (0â¦60 °C) I/O module power supply and processor 11.3 W 3.3 V DC -13â¦158 °F (-25â¦70 °C) I/O module logic power supply 23.4 W 24 V DC -13â¦158 °F (-25â¦70 °C) I/O module power supply and processor 21.6 W 24 V DC 32â¦140 °F (0â¦60 °C) sensor power supply 16.2 W 24 V DC -13â¦158 °F (-25â¦70 °C) sensor power supply |
Complementary
| Characteristic | Value(s) |
|---|---|
| Primary voltage limit | 85...264 V |
| Network Frequency | 50/60 Hz |
| Network frequency limits | 47â¦63 Hz |
| Apparent power | 0.12 kVA |
| Input current | 0.52 A 240 V 1.04 A 115 V |
| Inrush current | 30 A 120 V 60 A 240 V |
| I²t on activation | 1 A².s 120 V 3 A².s 240 V |
| It on activation | 0.05 A.s 120 V 0.07 A.s 240 V |
| MTBF reliability | 4300000 H |
| Protection type | Internal fuse not accessible primary circuit Overload protection secondary circuit Overvoltage protection secondary circuit Short-circuit protection secondary circuit |
| Current at secondary voltage | 0.9 A 24 V DC sensor power supply 1.3 A 24 V DC I/O module power supply and processor 4.5 A 3.3 V DC I/O module logic power supply |
| Maximum power dissipation in W | 8.5 W |
| Status LED | 1 LED (Green) rack voltage OK 1 LED (Green) sensor voltage |
| Control Type | RESET push-button cold restart |
| Electrical connection | 1 connector 2 alarm relay 1 connector 5 line supply, protective earth, 24 V DC input sensor |
| Insulation resistance | >= 100 MOhm primary/ground >= 100 MOhm primary/secondary |
| Product Weight | 0.79 lb(US) (0.36 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Phaseo AS-Interface |
| Product or Component Type | Power supply |
| Power supply type | Regulated switch mode |
| Output voltage | 30 V DC AS-Interface line |
| Kw Rating | 144 W |
| Input voltage | 100...240 V AC phase to phase L1-L2 100...240 V AC single phase N-L1 |
| Power supply output current | 4.8 A |
| Operating position | Vertical |
Complementary
| Characteristic | Value(s) |
|---|---|
| Input voltage limits | 85...264 V |
| Network frequency limits | 47â¦63 Hz |
| Input voltage tolerance | - 15...10 % |
| Inrush current | 30 A |
| Cos phi | 0.65 |
| Efficiency | 83 % 30 V |
| Power dissipation in W | 29.5 W 30 V |
| Current Consumption | 1 A |
| Input protection type | Integrated fuse (not interchangeable) |
| Line and load regulation | 3 % |
| Residual ripple | 300 mV |
| Holding time | >= 10 ms |
| Output protection type | Against overload, protection technology: 1.1 x In Against overvoltage, protection technology: tripping if U > 1.2 x Un Against short-circuits, protection technology: automatic reset Against undervoltage, protection technology: tripping if U < 0.95 x Un |
| Connections - terminals | AS-Interface line screw type terminals 4 x 2.5 mm², 4 0.004 in² (2.5 mm²) AWG 14) Input connection screw type terminals 2 x 2.5 mm², 2 0.004 in² (2.5 mm²) AWG 14) Input ground connection screw type terminals 1 x 2.5 mm², 1 0.004 in² (2.5 mm²) AWG 14) Output ground connection screw type terminals 2 x 2.5 mm², 2 0.004 in² (2.5 mm²) AWG 14) |
| Mounting Support | 75 mm symmetrical DIN rail 35 mm symmetrical DIN rail |
| Operating altitude | 6561.68 ft (2000 m) |
| Name of test | Rapid transient conforming to IEC 61000-4-4 level 3 Conducted/radiated emissions conforming to EN 55022 Class B Electrostatic discharges conforming to EN/IEC 61000-4-2 Emission conforming to EN 61000-6-3 Induced electromagnetic field conforming to EN/IEC 61000-4-6 Primary outage conforming to IEC 61000-4-11 Vibration conforming to EN/IEC 61131-2 Radiated electromagnetic field conforming to EN/IEC 61000-4-3 |
| Meantime between failure [MTBF] | 100000 h at 104 °F (40 °C) |
| Status LED | 1 LED (Green) output voltage 1 LED (Orange) input voltage |
| Product Weight | 2.9 lb(US) (1.3 kg) |
This ABT7 transformer supplies alternating current to control circuits while isolating them from mains power. It has a rated input voltage of 230V AC, a rated output voltage of 24V AC and a rated power of 320VA. It offers an economic way to supply each consuming load individually, or by groups of loads, in applications such as mining, refining motor control centers (MCC). It is ideal for systems accepting low voltage AC power, such as motor protection relays, contactors.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Modicon Transformer Economic |
| Product or component type | Safety and isolation transformer |
| Rated power in VA | 320 VA |
| Input voltage | 230 V AC phase to phase, terminal(s): L1-L2 230 V AC single phase, terminal(s): N-L1 |
| Output voltage | 24 V AC |
| Secondary winding | Single |
| Protective cover | Without |
| Ambient air temperature for operation | -20â¦40 °C |
Complementary
| Characteristic | Value(s) |
|---|---|
| Input voltage limits | 207...253 V |
| Network frequency limits | 47â¦63 Hz |
| Input voltage tolerance | +/- 15 V |
| Efficiency | 89 % |
| Power dissipation in W | 39.6 W |
| Voltage variation at nominal load | 5.08 % at 230 V |
| Output sustained overvoltage | 0,061 (no load, hot state) |
| Maximum voltage drop at rated load | 6.5 % |
| No load losses | 16.7 W |
| Short-circuit voltage | 0,062 |
| Output protection type | Against overload, protection technology: with additional protection fuses or circuit-breakers in Selection of Protection Against overvoltage, protection technology: with additional protection fuses or circuit-breakers in Selection of Protection Against short-circuits, protection technology: with additional protection fuses or circuit-breakers in Selection of Protection |
| Connections - terminals | For input connection: screw type terminals, connection capacity: 4 x 2.5...4 x 4 mm² AWG 14...AWG 11 For input ground connection: screw type terminals, connection capacity: 1 x 2.5...1 x 4 mm² AWG 14...AWG 11 For output connection: screw type terminals, connection capacity: 2 x 2.5...2 x 4 mm² AWG 14...AWG 11 |
| Marking | CE |
| Fixing mode | By 4 screws diameter: 5 mm on vertical panel, operating position: horizontal By 4 screws diameter: 5 mm on vertical panel, operating position: vertical By 4 screws diameter: 5 mm on horizontal panel with derating to 90 % |
| Operating altitude | 3000 m |
| Electrical insulation class | Class B |
| Width | 120.0 mm |
| Height | 93.0 mm |
| Depth | 122.0 mm |
| Product weight | 4.10 kg |
This ABL8 backup battery (storage capacity 7 ampere hour) supplies direct current voltage. It has a rated output current of 40A at 24V DC. This backup battery (storage capacity 7Ah) is designed to provide continuous auxiliary power during significant and long network power shortages. It provides long term backup power for power blackouts lasting more than a few seconds. It weighs 6,030kg. It is a functionnal module for power supply for industrial use, rail mounting. It is certified by GOST, UL. This functional module is mainly compatible with Modicon ABL8RP and Modicon ABL8WP Universal power supplies. It has LED diagnostics indicator available in the front for troubleshooting instantly. It installs on DIN rail. It brings energy to your automated systems. Designed for simple machines and applications, modular power supplies are primarily appreciated for their extreme compactness.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Phaseo |
| Product or component type | Battery module |
| Battery capacity | 7 Ah |
Complementary
| Characteristic | Value(s) |
|---|---|
| Input voltage limits | 21...29 V |
| Charging time | 72 h |
| Load current | 0.7 A |
| Self-discharge rate | 9 %, 3 months 3 %, 1 month 15 %, 6 months |
| Output coupling | Parallel |
| Operating altitude | 2000 m |
| Marking | CE |
| Product weight | 6.5 kg |
This ABL8 buffer module supplies direct current voltage. It has a rated input of 24V to 28.8V DC, a rated output current of 40A at 24V DC. This buffer module is designed to provide power during consumption surges or during short network power losses. It provides temporary backup power in case of deep voltage sags and breaks, without the use of batteries. It weighs 1,200kg. It is a functionnal module for power supply for industrial use, rail mounting. It conforms to UL 508, CSA C22.2 No 60950-1 standards. It is certified by EAC, RCM. This functional module is mainly compatible with Modicon ABL8RP and Modicon ABL8WP Universal power supplies. It has LED diagnostics indicator available in the front for troubleshooting instantly. It installs on DIN rail. It brings energy to your automated systems. Designed for simple machines and applications, modular power supplies are primarily appreciated for their extreme compactness.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Phaseo |
| Product or Component Type | Buffer module |
| Input voltage | 24...28.8 V DC |
| Output voltage | (Uin-0.25) V nominal mode DC (Uin-1) V buffer mode DC |
| Maximum output current | 40 A |
| Holding time | 0.1 s 40 A 6 s 0.5 A |
Complementary
| Characteristic | Value(s) |
|---|---|
| Input voltage limits | 22...30 V |
| Maximum power dissipation in W | 15 W |
| Activation threshold | (Uin-1) V and 22 V min |
| Charging time | 25 s |
| Number of output channels | 1 |
| Current consumption | 0.6 A on load 0.1 mA no load <= 40.6 A |
| Output protection type | Against overload, protection technology: > 45 A Against short-circuits, protection technology: power-supplied mode, automatic reset Against undervoltage, protection technology: tripping if U < 19 V |
| Connections - terminals | For input connection: screw type terminals, connection capacity: 2 x 0.5...2 x 10 mm² AWG 20...AWG 8 For output connection: screw type terminals, connection capacity: 2 x 0.5...2 x 10 mm² AWG 20...AWG 8 For diagnostic relay: removable screw terminal block, connection capacity: 1 x 2.5 mm² AWG 14 |
| Fixing mode | By clips 35 mm symmetrical DIN rail horizontal By clips 35 mm symmetrical DIN rail vertical |
| Output coupling | Parallel |
| Operating altitude | 6561.68 ft (2000 m) |
| Marking | CE |
| Name of test | Electrostatic discharges IEC 61000-4-2 Emission IEC 61000-6-3 Induced electromagnetic field IEC 61000-4-6 level 3 Radiated electromagnetic field IEC 61000-4-3 level 3 Rapid transient IEC 61000-4-4 level 3 Surge IEC 61000-4-5 level 2 Conducted/radiated emissions EN 55022 Class B, 20 % |
| Local signalling | 1 LED (green) for buffer ready 1 relay for buffer ready |
| Product Weight | 2.6 lb(US) (1.2 kg) |
This ABLS regulated switch mode power supply (SMPS) supplies direct current voltage. It has a rated input of 100V to 240V AC and 140 V to 340 V DC, a rated output current of 10A at 12V DC and a rated power output of 120W. It is ideal for supplying DC voltage necessary for automation equipment designed for applications in industrial, commercial and residential applications such as conveying, packaging, control, food & beverage, mining, oil & gas and water. It installs on omega rail or fixing by screw. Its width is 40mm, its height is 123,6mm, its depth is 117,6mm. It ensures a protection against overloads and short-circuits with automatic restart after the source of overload/short-circuit has been corrected. It weighs 0.520kg. It is a power supply for industrial use, rail mounting. It conforms to EN62368-1, ENIEC61010-1/2-201, ENIEC61204-3, EN61000-6-1/2/3/4, EN61000-3-2-3, UL62368-1, UL61010-2-201/-1-201, CSAC22.2No62368-1/No61010-2-201/No61010-1 standards, and certified by CE, CUL listed/recognized, RCM, CBscheme. The Acti9 iC60 range of Miniature Circuit Breakers is recommanded for its protection. The type of protection is 13A, C-curve. It has in the front face a LED indicating presence of DC output voltage, and a QR code for access to the latest technical documentation. Thanks to its book housing, it can be installed either in enclosures or industrial panels by clipping on omega (DIN) rail. It brings energy to your automated systems. Designed for simple machines and applications, modular power supplies are primarily appreciated for their extreme compactness.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Power Supply |
| Product or Component Type | Power supply |
| Power supply type | Regulated switch mode |
| Variant option | Optimized |
| Enclosure Material | Aluminum |
| Nominal input voltage | 100...240 V AC single phase 100...240 V AC phase to phase 140...340 V DC |
| Kw Rating | 120 W |
| Output voltage | 12 V DC |
| Power supply output current | 10 A |
Complementary
| Characteristic | Value(s) |
|---|---|
| Efficiency at full load | 85...264 V AC without temperature derating 120...375 V DC without temperature derating |
| Nominal network frequency | 50â¦60 Hz |
| Network system compatibility | TN TT IT |
| Maximum leakage current | 1 mA 240 V AC |
| Input protection type | Integrated fuse (not interchangeable) 4 A External protection (recommended) 20 A Curve C External protection (recommended) 13 A Curve C |
| Inrush current | 30.0 A 115 V 60.0 A 230 V |
| Power factor | 0.55 at 115 V AC 0.45 at 230 V AC |
| Efficiency | 84 % 115 V AC 86 % 230 V AC |
| Output voltage adjustment | 11...14 V |
| Power dissipation in W | 25 W |
| Current consumption | < 2.5 A 115 V AC < 1.4 A 230 V AC < 1.3 A 140 V DC |
| Turn-on time | < 1 s |
| Holding time | > 20 ms 115 V AC > 40 ms 230 V AC |
| Startup with capacitive loads | 8000 µF |
| Residual ripple | < 120 mV |
| Meantime between failure [MTBF] | 700000 h at 77 °F (25 °C), full load conforming to SR 332 |
| Output protection type | Against overload and short-circuits, protection technology: automatic reset Against over temperature, protection technology: manual reset Against overvoltage, protection technology: manual reset |
| Connections - terminals | Screw connection 0.5...4 mm², AWG 20...AWG 12) without wire end ferrule output Screw connection 0.5...2.5 mm², AWG 20...AWG 14) with wire end ferrule output Screw connection 0.75...4 mm², AWG 18...AWG 12) without wire end ferrule input Screw connection 0.75...4 mm², AWG 18...AWG 12) with wire end ferrule input |
| Line and load regulation | < 0.5 % network 0 to 100 % load at 77 °F (25 °C) < 1 % network full voltage range in line at 77 °F (25 °C) |
| Status LED | 1 LED (Green) output voltage |
| Depth | 4.6 in (117.6 mm) |
| Height | 4.9 in (123.6 mm) |
| Width | 1.6 in (40 mm) |
| Product Weight | 1.15 lb(US) (0.52 kg) |
| Output coupling | Parallel Serial |
| Mounting support | Top hat type TH35-15 rail IEC 60715 Top hat type TH35-7.5 rail IEC 60715 Double-profile DIN rail |
| Supply | SELV IEC 60950-1 SELV IEC 60204-1 SELV IEC 60364-4-41 |
| Dielectric strength | 3000 V AC with input to output |
| Service life | 10 year(s) |
| Overvoltage category | II |
voltage transformer - 230..400 V - 2 x 24 V - 320 VA
Regulated Power Supply, 100-240V AC, 12V 6.2 A, single phase, Optimized
voltage transformer - 230..400 V - 2 x 24 V - 100 VA
This ABT7 transformer supplies alternating current to control circuits while isolating them from mains power. It has a rated input voltage of 230V to 400V AC, a rated output voltage of 115/230V AC thanks to its double secondary winding, and a rated power of 250VA. It offers an economic way to supply each consuming load individually, or by groups of loads, in applications such as mining, refining. It is ideal for systems accepting low voltage AC power, such as motor protection relays, contactors.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Modicon Transformer Universal |
| Product or component type | Safety and isolation transformer |
| Rated power in VA | 250 VA |
| Input voltage | 230 V AC single phase, terminal(s): N-L1 400 V AC phase to phase, terminal(s): L1-L2 |
| Output voltage | 115/230 V AC |
| Secondary winding | Double |
| Protective cover | With |
| Ambient air temperature for operation | -20â¦60 °C |
Complementary
| Characteristic | Value(s) |
|---|---|
| Input voltage limits | 207...253 V 360...440 V |
| Network frequency limits | 47â¦63 Hz |
| Input voltage tolerance | +/- 15 V |
| Efficiency | 90 % |
| Power dissipation in W | 27.8 W |
| Voltage variation at nominal load | 0,0313 at 230 V 0,0313 at 400 V |
| Output sustained overvoltage | 0,018 (no load, hot state) |
| Maximum voltage drop at rated load | 3.37 % |
| No load losses | 13.68 W |
| Short-circuit voltage | 0,066 |
| Output protection type | Against overload, protection technology: with additional protection fuses or circuit-breakers in Selection of Protection Against overvoltage, protection technology: with additional protection fuses or circuit-breakers in Selection of Protection Against short-circuits, protection technology: with additional protection fuses or circuit-breakers in Selection of Protection |
| Connections - terminals | For input connection: screw type terminals, connection capacity: 5 x 4 mm² AWG 11 For input ground connection: screw type terminals, connection capacity: 1 x 4 mm² AWG 11 For output connection: screw type terminals, connection capacity: 4 x 4 mm² AWG 11 |
| Marking | CE |
| Fixing mode | By 4 screws diameter: 6.5 mm on vertical panel, operating position: horizontal By 4 screws diameter: 6.5 mm on vertical panel, operating position: vertical By 4 screws diameter: 6.5 mm on horizontal panel with derating to 90 % |
| Output coupling | Parallel Grounding of secondary Series by internal jumper |
| Operating altitude | 3000 m |
| Electrical insulation class | Class B |
| Status LED | 1 LED (orange) input voltage |
| Width | 123.0 mm |
| Height | 152.0 mm |
| Depth | 141.0 mm |
| Product weight | 5.56 kg |
This ABT7 transformer supplies alternating current to control circuits while isolating them from mains power. It has a rated input voltage of 230V to 400V AC, a rated output voltage of 115/230V AC thanks to its double secondary winding, and a rated power of 400VA. It offers an economic way to supply each consuming load individually, or by groups of loads, in applications such as mining, refining. It is ideal for systems accepting low voltage AC power, such as motor protection relays, contactors.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Modicon Transformer Universal |
| Product or component type | Safety and isolation transformer |
| Rated power in VA | 400 VA |
| Input voltage | 230 V AC single phase, terminal(s): N-L1 400 V AC phase to phase, terminal(s): L1-L2 |
| Output voltage | 115/230 V AC |
| Secondary winding | Double |
| Protective cover | Without |
| Ambient air temperature for operation | -20â¦60 °C |
Complementary
| Characteristic | Value(s) |
|---|---|
| Input voltage limits | 207...253 V 360...440 V |
| Network frequency limits | 47â¦63 Hz |
| Input voltage tolerance | +/- 15 V |
| Efficiency | 90 % |
| Power dissipation in W | 44.4 W |
| Voltage variation at nominal load | 0,0375 at 230 V 0,039 at 400 V |
| Output sustained overvoltage | 0,033 (no load, hot state) |
| Maximum voltage drop at rated load | 4.17 % |
| No load losses | 21.28 W |
| Short-circuit voltage | 0,041 |
| Output protection type | Against overload, protection technology: with additional protection fuses or circuit-breakers in Selection of Protection Against overvoltage, protection technology: with additional protection fuses or circuit-breakers in Selection of Protection Against short-circuits, protection technology: with additional protection fuses or circuit-breakers in Selection of Protection |
| Connections - terminals | For input connection: screw type terminals, connection capacity: 5 x 4 mm² AWG 11 For input ground connection: screw type terminals, connection capacity: 1 x 4 mm² AWG 11 For output connection: screw type terminals, connection capacity: 6 x 4 mm² AWG 11 |
| Marking | CE |
| Fixing mode | By 4 screws diameter: 7 mm on vertical panel, operating position: horizontal By 4 screws diameter: 7 mm on vertical panel, operating position: vertical By 4 screws diameter: 7 mm on horizontal panel with derating to 90 % |
| Output coupling | Parallel Grounding of secondary Series by internal jumper |
| Operating altitude | 3000 m |
| Electrical insulation class | Class B |
| Width | 150.0 mm |
| Height | 113.0 mm |
| Depth | 145.0 mm |
| Product weight | 7.30 kg |