1 year warranty
discrete I/O extension module - 14 I O - 24 V AC - for Zelio Logic
I/O distributed module OTB - CANopen bus - 0..1000 m
discrete I/O extension module - 6 I O - 100..240 V AC - for Zelio Logic
discrete I/O extension module - 6 I O - 24 V AC - for Zelio Logic
This Zelio Logic SR3 discrete I/O extension module smart relays uses a supply voltage of 24V direct current. It has 10 inputs / outputs contact with screw-clamp terminals. It enables simple ladder programming, adapted for non-specialists.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Zelio Logic |
| Product or Component Type | Discrete I/O extension module |
Complementary
| Characteristic | Value(s) |
|---|---|
| Number or control scheme lines | 120 ladder |
| Cycle time | 6â¦90 ms |
| Backup time | 10 years 77 °F (25 °C) |
| Clock drift | 12 min/year 32â¦131 °F (0â¦55 °C) |
| Checks | Program memory on each power up |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 19.2â¦30 V |
| Reverse polarity protection | With |
| Discrete input number | 6 IEC 61131-2 Type 1 |
| Discrete input type | Resistive |
| Discrete input voltage | 24 V DC |
| Discrete input current | 4 mA |
| Counting frequency | 1 kHz discrete input |
| Voltage state 1 guaranteed | >= 15 V I1...IA and IH...IR discrete input circuit >= 15 V IB...IG used as discrete input circuit |
| Voltage state 0 guaranteed | <= 5 V I1...IA and IH...IR discrete input circuit <= 5 V IB...IG used as discrete input circuit |
| Current state 1 guaranteed | >= 1.2 mA IB...IG used as discrete input circuit) >= 2.2 mA I1...IA and IH...IR discrete input circuit) |
| Current state 0 guaranteed | <= 0.5 mA IB...IG used as discrete input circuit) <= 0.75 mA I1...IA and IH...IR discrete input circuit) |
| Input compatibility | 3-wire proximity sensors PNP discrete input |
| Input impedance | 12 kOhm IB...IG used as discrete input circuit 7.4 kOhm I1...IA and IH...IR discrete input circuit |
| Number of Outputs | 4 relay |
| Output voltage limits | 24...250 V AC relay output) 5...30 V DC relay output) |
| Contacts type and composition | NO relay output |
| Output thermal current | 8 A for all 4 outputs relay output |
| Electrical durability | AC-15 500000 cycles 230 V, 0.9 A relay output IEC 60947-5-1 AC-12 500000 cycles 230 V, 1.5 A relay output IEC 60947-5-1 DC-13 500000 cycles 24 V, 0.6 A relay output IEC 60947-5-1 DC-12 500000 cycles 24 V, 1.5 A relay output IEC 60947-5-1 |
| Switching capacity in mA | >= 10 mA 12 V relay output) |
| Operating rate in Hz | 0.1 Hz at Ie)relay output 10 Hz no load)relay output |
| Mechanical durability | 10000000 cycles relay output |
| [Uimp] rated impulse withstand voltage | 4 kV EN/IEC 60947-1 and EN/IEC 60664-1 |
| Response time | 10 ms from state 0 to state 1)relay output 5 ms from state 1 to state 0)relay output |
| Connections - terminals | Screw terminals, 1 x 0.25...1 x 2.5 mm² AWG 24...AWG 14) flexible with cable end Screw terminals, 2 x 0.25...2 x 0.75 mm² AWG 24...AWG 18) flexible with cable end Screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 25...AWG 14) semi-solid Screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 25...AWG 14) solid Screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) solid |
| Tightening torque | 4.4 lbf.in (0.5 N.m) |
| Overvoltage category | III conforming to IEC 60664-1 |
| Product Weight | 0.4 lb(US) (0.2 kg) |
discrete I/O extension module - 10 I O - 100..240 V AC - for Zelio Logic
This Schneider Electric Zelio Logic SR3 Discrete I/O Extension Module Smart Relays uses a supply voltage of 24 volts alternating current, has 10 inputs / outputs contact with screw-clamp terminals. This Discrete I/O Extension Module Smart Relays provides Zelio Logic relays with additional inputs and outputs. It has a compact form-factor, allowing installation on DIN rail. Simple ladder programming, adapted for non-specialists. Discovery package, coming with Zelio Soft programming software, the simplest way to learn and use this relay. Built-in EEPROM flash memory for data backup up to 10 years, easy-to-recover after a power shortage or incident. More I/O than SR2 model, for larger applications. The main application of this module is industry and building/service sector. This product is certified by C-Tick, GL, UL, CSA and GOST. It meets EN/IEC 61000-4-2 L3, EN/IEC 61000-4-5, EN/IEC 61000-4-6 L3 and EN/IEC 60068-2-6 Fc standards. Easy to use, Zelio Logic provides a real alternative solutions based on cabled logic or specific cards.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Zelio Logic |
| Product or Component Type | Discrete I/O extension module |
Complementary
| Characteristic | Value(s) |
|---|---|
| Number or control scheme lines | 120 ladder |
| Cycle time | 6â¦90 ms |
| Backup time | 10 years 77 °F (25 °C) |
| Clock drift | 12 min/year 32â¦131 °F (0â¦55 °C) |
| Checks | Program memory on each power up |
| [Us] rated supply voltage | 24 V AC |
| Supply voltage limits | 20.4â¦28.8 V |
| Supply frequency | 50/60 Hz |
| Reverse polarity protection | With |
| Discrete input number | 6 |
| Discrete input voltage | 24 V AC |
| Discrete input current | 4.4 mA |
| Discrete input frequency | 47...53 Hz 57...63 Hz |
| Voltage state 1 guaranteed | >= 14 V discrete input |
| Voltage state 0 guaranteed | <= 5 V discrete input |
| Current state 1 guaranteed | >= 2 mA discrete input) |
| Current state 0 guaranteed | <= 0.5 mA discrete input) |
| Input impedance | 4.6 kOhm discrete input |
| Number of Outputs | 4 relay |
| Output voltage limits | 5...30 V DC relay output) 24...250 V AC |
| Contacts type and composition | NO relay output |
| Output thermal current | 8 A for all 4 outputs relay output |
| Electrical durability | AC-15 500000 cycles 230 V, 0.9 A relay output IEC 60947-5-1 AC-12 500000 cycles 230 V, 1.5 A relay output IEC 60947-5-1 DC-13 500000 cycles 24 V, 0.6 A relay output IEC 60947-5-1 DC-12 500000 cycles 24 V, 1.5 A relay output IEC 60947-5-1 |
| Switching capacity in mA | >= 10 mA 12 V relay output) |
| Operating rate in Hz | 0.1 Hz at Ie)relay output 10 Hz no load)relay output |
| Mechanical durability | 10000000 cycles relay output |
| [Uimp] rated impulse withstand voltage | 4 kV EN/IEC 60947-1 and EN/IEC 60664-1 |
| Response time | 50 ms ladder from state 0 to state 1)discrete input 50 ms ladder from state 1 to state 0)discrete input 50...255 ms FBD from state 0 to state 1)discrete input 50...255 ms FBD from state 1 to state 0)discrete input 10 ms from state 0 to state 1)relay output 5 ms from state 1 to state 0)relay output |
| Connections - terminals | Screw terminals, 1 x 0.25...1 x 2.5 mm² AWG 24...AWG 14) flexible with cable end Screw terminals, 2 x 0.25...2 x 0.75 mm² AWG 24...AWG 18) flexible with cable end Screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 25...AWG 14) semi-solid Screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 25...AWG 14) solid Screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) solid |
| Tightening torque | 4.4 lbf.in (0.5 N.m) |
| Overvoltage category | III conforming to IEC 60664-1 |
| Product Weight | 0.4 lb(US) (0.2 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon X80 |
| Accessory / Separate Part Type | Preformed cordset |
| Accessory / separate part designation | Preformed cordset with one end with flying leads |
| Accessory / separate part destination | For I/O module with 40-way connectors |
| Number of cables | 1 |
| Electrical connection | 1 connector 40 ways 1 end with color-coded flying leads DIN 47100 |
| Cable length | 9.8 ft (3 m) |
Complementary
| Characteristic | Value(s) |
|---|---|
| Total number of wires | 20 |
| Wire section | 0.0005 in² (0.324 mm²) |
| AWG Gauge | AWG 22 |
| Product Weight | 1.81 lb(US) (0.82 kg) |
This interface module for Ethernet Modbus/TCP network is part of the range Modicon TM2 I/O expansion modules. This interface module incorporates 20 inputs / outputs: 12 inputs and 8 outputs. Its supply voltage is 24V dc. It enables data exchange between a control source (PLC, variable speed drives, PC) and the inputs and outputs. It complies with Magelis HMI controller XBTGC and Drive controllers Altivar IMC (with Altivar 61 / Altivar 71). It is equipped with a removable screw terminal block, and can be mounted on a symmetrical DIN rail 35mm.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon OTB |
| Product or Component Type | I/O distributed module |
| Integrated connection type | Ethernet TCP/IP RJ45 1 twisted pair 10/100 Mbit/s transparent ready class A10 |
| Discrete input number | 12 EN/IEC 61131 type 1 |
| Discrete input logic | Sink or source |
| Discrete input current | 5 mA I0...I1 5 mA I6...I7 7 mA I2...I5 7 mA I8...I11 |
| Discrete output number | 2 solid state PNP Q0...Q1 source 6 relay Q2...Q7 |
| Discrete output current | 2000 mA relay 300 mA solid state |
Complementary
| Characteristic | Value(s) |
|---|---|
| Concept | Transparent Ready |
| Port Ethernet | 10BASE-T/10BASE-TX |
| Bus length | 0.0000000000â¦328.08 ft (0â¦100 m), copper |
| Number of devices per segment | 0â¦256 |
| Communication Service | Modbus messaging |
| Web services | No standard Web server |
| Discrete input voltage | 24 V |
| Discrete input voltage type | DC |
| Discrete input type | NPN or PNP |
| Input voltage limits | 20.4...26.4 V |
| Electronic filtering time | 0.035 ms I0...I1 at state 1 0.035 ms I6...I7 at state 1 0.04 ms I2...I5 at state 1 0.04 ms I8...I11 at state 1 0.045 ms I0...I1 at state 0 0.045 ms I6...I7 at state 0 0.15 ms I2...I5 at state 0 0.15 ms I8...I11 at state 0 |
| Configurable filtering time | 0 ms 3 ms 12 ms |
| Input impedance | 3.4 kOhm I2...I5 3.4 kOhm I8...I11 5.7 kOhm I0...I1 5.7 kOhm I6...I7 |
| Discrete output voltage | 24 V DC solid state 240 V AC relay 30 V DC relay |
| Output voltage limits | 20.4...28.8 V solid state |
| Maximum output current | 360 mA, solid state |
| Maximum current per output common | 8 A relay 0.72 A solid state |
| Current consumption | 30 mA 5 V DC at state 1) relay output 40 mA 24 V DC at state 1) relay output 5 mA 5 V DC at state 0) relay output |
| Output overvoltage protection | 38...40 V |
| Maximum tungsten load | <8 W solid state |
| Response time | 300 µs at state 0 relay 300 µs at state 1 relay 5 µs at state 0 solid state 5 µs at state 1 solid state |
| Minimum switchable load | 0.1 mA |
| Contact bounce time | <= 1 ms relay |
| Maximum leakage current | 0.1 mA at state 0 solid state |
| Drop-out voltage | 1 V at state 1 |
| Insulation between channel and internal logic | 1500 Vrms for 1 minute relay output 500 Vrms for 1 minute input circuit 500 Vrms for 1 minute solid state output |
| Insulation between channels | None |
| Contact resistance | 30 mOhm |
| Electrical durability | 500000 cycles AC-1 500 VA relay output 500000 cycles AC-14 250 VA relay output 500000 cycles AC-15 200 VA relay output 500000 cycles DC-1 60 W relay output 500000 cycles DC-13 30 W relay output |
| Supply circuit type | DC |
| [Us] rated supply voltage | 24 V |
| Supply voltage limits | 20.4â¦26.2 V |
| Input current | 700 mA 26.2 V supply circuit |
| Inrush current | 1 A solid state output 50 A supply circuit |
| Power Consumption in W | 19 W |
| Maximum Number of I/O Expansion Module | 7 |
| I/O expansion capacity | 132 screw terminal discrete I/O 188 spring terminal discrete I/O 244 HE10 connector discrete I/O 7 x 8I or 7 x 2I or 7 x (4I/2O) screw terminal analogue I/O |
| Insulation resistance | >= 10 MOhm between I/O and earth terminals >= 10 MOhm between power supply and earth |
| I/O connection | Removable screw terminal block |
| Number of common point | 1 relay output 1 NO) 1 relay output 2 NO) 1 relay output 3 NO) 1 input 1 solid state output |
| Counting input number | 2 |
| Counting capacity | 32 bits |
| Counting frequency | 5000 Hz 20000 Hz |
| Pulse generator number | 2 |
| Pulse generator frequency | 7 kHz |
| Pulse generator function | RPLS pulse generator output RPWM pulse width modulation |
| Marking | CE |
| Fixing mode | By clips (35 mm symmetrical DIN rail) By screws (panel with fixing kit) By screws (solid plate with fixing kit) |
| Status LED | 1 LED per channel (Green) I/O 1 LED (Green) 10T 1 LED (Green) PWR 1 LED (Yellow) 100T 1 LED (Yellow) STAT |
| Product Weight | 0.408 lb(US) (0.185 kg) |
I/O distributed module OTB - Modbus non isolated serial link - 0..10 m
ruggedized rack M340 - 6 slots - panel, plate or DIN rail mounting
LV429215 SCHNEIDER ELECTRIC DIFFERENTIAL MODULE COMPACT VIGI MH - 30..10000 MA- 440..550 V - 3 POLES FOR NSX100 / 160
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M340 automation platform |
| Accessory / separate part designation | Kit of 2 removable connectors |
| Accessory / Separate Part Type | Connector |
| Accessory / separate part category | Connection accessory |
| Accessory / separate part destination | M340 power supply modules |
| Connections - Terminals | Cage clamp |
Complementary
| Characteristic | Value(s) |
|---|---|
| Product Compatibility | BMXCPS3500 BMXCPS2000 BMXCPS2010 BMXCPS3020 |
| Kit composition | One 2-way terminal block One 5-way terminal block |
| Product Weight | 0.04 lb(US) (0.02 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon X80 |
| Accessory / Separate Part Type | Shielding connection kit |
| Product or Component Type | Connector kit |
| Product Compatibility | 8 slot backplane |
| Accessory / separate part destination | Backplane |
| Number of slots | 8 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Kit composition | Two sub-bases A metal bar |
| Product Weight | 0.75 lb(US) (0.34 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon X80 |
| Product or Component Type | Ruggedized backplane |
| Product Specific Application | For severe environments |
Complementary
| Characteristic | Value(s) |
|---|---|
| Number of slots | 4 bus X |
| Product Compatibility | BMXP34 processor BMXCPS power supply I/O module Specific application module |
| Power Consumption in W | 1.12 W |
| Electrical connection | 1 connector (XBE) expansion module |
| Fixing mode | By 4 M4/M5/M6 screws panel By 4 M4/M5/M6 screws mounting plate By clips 35 mm symmetrical DIN rail |
| Height | 4.08 in (103.7 mm) |
| Width | 9.5 in (242.4 mm) |
| Depth | 0.7 in (19 mm) |
| Product Weight | 1.39 lb(US) (0.63 kg) |
This product is part of the Modicon M340 range, an offer of Programmable Automation Controllers (PAC). This protective cover is for unoccupied slots on M340 rack. This product is robust, high quality and based on the latest innovative technology. It weighs 0.005kg. It is suitable for medium to large process applications. This protection cover is compatible with Modicon M340 BMXXBP1200, BMXXBP0400, BMXXBP0800 and BMXXBP0600 backplane. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M340 automation platform |
| Accessory / separate part category | Protection accessories |
| Accessory / Separate Part Type | Cover |
| Accessory / separate part designation | Protective cover |
| Product Compatibility | BMXXBP1200 BMXXBP0400 BMXXBP0800 BMXXBP0600 |
| Accessory / separate part destination | Unoccupied slots on rack |
| Quantity per Set | Set of 5 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Product Weight | 0.011 lb(US) (0.005 kg) |
backplane extension cable M340 - 0.8 m
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M340 automation platform |
| Accessory / separate part designation | Kit of 2 removable connectors |
| Accessory / Separate Part Type | Connector |
| Accessory / separate part category | Connection accessory |
| Accessory / separate part destination | M340 power supply modules |
| Connections - Terminals | Spring type terminals |
Complementary
| Characteristic | Value(s) |
|---|---|
| Product Compatibility | BMXCPS3500 BMXCPS2010 BMXCPS3020 BMXCPS2000 |
| Kit composition | One 2-way terminal block One 5-way terminal block |
| Product Weight | 0.033 lb(US) (0.015 kg) |
28-way removable spring terminal block
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon X80 |
| Accessory / Separate Part Type | Preformed cordset |
| Accessory / separate part designation | Preformed cordset with one end with flying leads |
| Accessory / separate part destination | For I/O module with 40-way connectors |
| Number of cables | 1 |
| Electrical connection | 1 connector 40 ways 1 end with color-coded flying leads DIN 47100 |
| Cable length | 16.4 ft (5 m) |
Complementary
| Characteristic | Value(s) |
|---|---|
| Total number of wires | 20 |
| Wire section | 0.0005 in² (0.324 mm²) |
| AWG Gauge | AWG 22 |
| Product Weight | 3.02 lb(US) (1.37 kg) |
This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This PTO module has 2 channels, 4 inputs with sink (positive) discrete logic. It is a PTO module with an input/output voltage 24V DC, an output current of 50mA and a maximum current consumption of 200mA at 3.3V DC. This product is robust, high quality and based on the latest innovative technology. It is furnished with two 28-way connectors for electrical connection. There is no insulation between channels. It is suitable for medium to large process applications. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. This output compatible with signal converter (USIC), RS422, 7mA input and source input, 5V to 24V. Input compatible with 2-wire/3-wire proximity sensor 19.2V to 30V conforming to IEC 947-5-2. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon X80 |
| Product or Component Type | PTO module |
| Number of channels | 2 |
| Number of inputs | 4 |
| Discrete input type | Current sink yes origin input IEC 61131-2 type 3 Current sink yes proximity input and limit switch input IEC 61131-2 type 3 Current sink or source counter in position input IEC 61131-2 type 3 Current sink or source drive ready, emergency input IEC 61131-2 type 3 |
| Input compatibility | 2-wire/3-wire proximity sensor 19.2â¦30 V IEC 947-5-2 |
| Output compatibility | Signal converter (USIC) RS422, 7 mA input Source input, 5 V to 24 V |
| Output frequency | 200 kHz <1.6 ft (0.5 m) with USIC and VW3M8210R05 100 kHz <16.4 ft (5 m) with the normal source input circuit 200 kHz <32.8 ft (10 m) with the RS422 compatible circuits |
Complementary
| Characteristic | Value(s) |
|---|---|
| Operating threshold | > 12 V no error supply voltage > 8 V error supply voltage |
| Input voltage | 24 V DC |
| Input current | 4.3 mA |
| Voltage state 1 guaranteed | >= 11 V |
| Current consumption | 35 mA 24 V DC preactuator 150 mA 3.3 V DC typical 200 mA 3.3 V DC maximum |
| Current state 1 guaranteed | >= 2 mA |
| Voltage state 0 guaranteed | 5 V |
| Current state 0 guaranteed | <= 1.5 mA |
| Response time | < 200 µs for position completed input and drive ready input < 60 µs for origin input and proximity input |
| Number of outputs | 1 pulse output 2 auxiliary output |
| Preactuator voltage detection threshold | < 8 V error preactuator voltage auxiliary output < 8 V no error preactuator voltage auxiliary output > 14 V error preactuator voltage pulse output > 14 V no error preactuator voltage pulse output |
| Output voltage | 24 V DC |
| Output voltage limits | 19...30 V |
| Discrete output current | 50 mA |
| Current per channel | 0.4 A |
| Maximum leakage current | 0.05 mA at state 0 |
| [Ures] residual voltage | 0.15 V at state 1 |
| Response time on output | 1.2...1.5 ms on appearance 1.2...1.5 ms on disappearance |
| Load impedance ohmic | 15000 Ohm |
| Output overload protection | By current limiter and electronic circuit breaker |
| Output short-circuit protection | By current limiter and electronic circuit breaker |
| Reverse polarity protection | By reverse mounting diode on output Integrated on input |
| Insulation between channels | No insulated |
| Insul btwn prim and second | 1500 Vrms |
| Insulation resistance | > 10 MOhm |
| Local signalling | 1 LED (green) for module operating (RUN) 1 LED (red) for external fault (I/O) 1 LED (red) for internal fault, module failure (ERR) 1 LED (green) for download (DL) 8 LEDs (green) for channel status (CH00) 8 LEDs (green) for channel status (CH01) |
| Electrical connection | 2 connectors 28 pins |
| Module format | Standard |
| Product certifications | CE UL CSA RCM EAC Merchant Navy ATEX zone 2/22 IECEx zone 2/22 |
This cord set is part of the Modicon X80 range, an offer of common modules and installation accessories for M580 and M340 automation platforms. This discrete output module offers 8 positive discrete output logic. It offers discrete output voltage ranges from 19V DC to 30V DC, 24V DC with solid state and not isolated discrete output. It is an IP20 rated product. It weighs 0.12kg. It is to be used with BMXFTB2010 screw clamp type terminal block. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock. The Modicon X80 range is one important part of EcoStruxure Plant, an open, flexible, reliable, sustainable, safe and secure architecture.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon X80 |
| Product or Component Type | Discrete output module |
| Discrete output number | 8 EN/IEC 61131-2 |
| Discrete output type | Solid state Not isolated |
| Discrete output logic | Positive |
| Discrete output voltage | 24 V 19...30 V DC |
| Discrete output current | 0.5 A |
| Output compatibility | Not IEC 61131-2 DC input IEC 61131-2 type 3 DC input |
Complementary
| Characteristic | Value(s) |
|---|---|
| Current per channel | 0.625 A |
| Maximum current per module | 10 A |
| Maximum leakage current | 0.5 mA at state 0 |
| Maximum voltage drop | <1.2 V at state 1 |
| Insulation resistance | > 10 MOhm 500 V DC |
| Power dissipation in W | 4.4 W |
| Response time on output | 1.2 ms |
| Paralleling of outputs | Yes : 2 maximum |
| Typical current consumption | 264 mA 3.3 V DC 15 mA 24 V |
| MTBF reliability | 383000 H |
| Protection type | reverse polarity protection overload protection overvoltage protection short-circuit protection |
| Output overload protection | With current limiter With electronic circuit breaker 1.5 In < Id < 2 In |
| Output overvoltage protection | With transil diode |
| Output short-circuit protection | With 2 A external fuse |
| Reverse polarity protection | Reverse mounted diode |
| Voltage detection threshold | < 14 V DC sensor fault > 18 V DC sensor OK |
| Maximum tungsten load | 6 W |
| Switching frequency | 0.5/LI² Hz |
| Load impedance ohmic | >= 48 Ohm |
| Status LED | 1 LED (Green) module operating (RUN) 1 LED per channel (Green) channel diagnostic 1 LED (Red) module error (ERR) 1 LED (Red) module I/O |
| Product Weight | 0.26 lb(US) (0.12 kg) |
ruggedized rack M340 - 8 slots - panel, plate or DIN rail mounting
cord set - 20 ways terminal - SUB-D 25 for M340 I/O - 3 m