Machine Vision Systems

Keyence FU-67MG Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence VL-A4 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-8154 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FS-V21RM Keyence

$548.07

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-R39F-R Keyence

$1,869.05

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88895 Keyence

$531.06

Only 1 unit left

Specifications

Model				OP-88895
Female				M12 8-pin Straight
Male				Strand wire
Length				10 m 32.8'
Material				cable: PVC connector: SUS316L

Keyence LV-H37 Keyence

$1,050.21

Only 7 units left

Specifications

Model		LV-H37
Type		Ultra-small beam spot
FDA (CDRH) Part 1040.10		Class II
Light source		Visible red semiconductor laser
Wavelength		660 nm
Detecting distance	FINE	70 ±15 mm 2.76" ±0.59"
	TURBO
	SUPER
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Material	Case	Glass reinforced plastic ^*1
	Lens cover	Glass ^*2
Weight		Approx. 45 g
^1 Norbornene plastic or acrylic ^2 The LV-H32 and the LV-H37 receivers are polyarylate.

Keyence GL-RS3 Keyence

$0.00

Sold Out

Specifications

Model				GL-RS3
Type				Joint Cable
Number included				1 cable
Cable end				Both ends of the connector (Black) are the same shape. The connector can be connected in either direction.
Length				3 m 9.84'
Material				Main unit connection connector: PBT, Cable: PVC
Note				Use this when using the product in a one-line system or when connecting the product in series.
Weight				Approx. 165 g

Keyence AP-13SK Keyence

$0.00

Sold Out

Specifications

Model		AP-13SK
Type		Positive Sensor Head
Rated pressure		0 to 145 PSI
Fluid type		Gases and liquids compatible with 304 and 630 stainless steel
Type of pressure		Gauge pressure
Repeatability		0.5 % of F.S. max.
Connection port		1/8 NPT
Environmental resistance	Enclosure rating	IP67
	Pressure resistance	290 PSI
	Ambient temperature	-10 to 70°C(14 to 158°F), No condensation
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 3 hours respectively
	Shock resistance	500 m/s² in X, Y, and Z directions 10 times respectively (60 times in total)
Material		Diaphragm pressure port: TYPE S17400 stainless steel, Pressure port: 304 stainless steel, Throttle: 304 stainless steel (AP-14SK/15SK/16SK only)
Accessories		Sensor head connector: 1
Weight		Approx. 120 g

Keyence GL-RP30P Keyence

$0.00

Sold Out

Specifications

Model				GL-RP30P
Type				Unit connection cable
Number included				1 cable
Cable end				Main unit plug (Black) - Loose wires
Length				30 m 98.42'
Material				Main unit connection connector: PBT, Cable: PVC
Note				Brown and blue: 22 AWG (nominal cross section: 0.34 mm²), other: 26 AWG (nominal cross section: 0.14 mm²)
Weight				Approx. 1200 g

Keyence MP-FG10R Keyence

$0.00

Sold Out

Specifications

Model		MP-FG10R
Type		Standard model
Connection bore diameter		G3/8" (10 A)
Supported gases		Air and non-corrosive gases
Supported gas temperature		-5 to +50°C, 23 to 122°F
Operating pressure range		0.2 to 1 MPa, 2 to 10 bar, 29 to 145 psi ^*1
Pressure resistance		1.5 MPa, 15 bar, 217.5 psi
Flow rate	Detection principle	Heat based (mass flow rate)
	Rated flow range (normal)	2.0 to 1000.0 L/min 0.12 to 60.00 m³/h 4.24 to 2118.88 ft³/h 0.07 to 35.31 CFM
	Zero cut flow rate	2.0 L/min, 0.12 m³/h 4.24 ft³/h, 0.07 CFM
	Measurement accuracy	±(1.5% of RD + 0.5% of F.S.) ^2 ^3
	Repeatability	±1.0% of F.S. (with an averaging time of 1.0 s)
	Display resolution	0.1 L/min, 0.01 m³/h 0.35 ft³/h, 0.01 CFM
	Response time	150 ms (63% response) ^*4
	Averaging time	OFF/100 ms/200 ms/500 ms/1.0 s/3.0 s/5.0 s/10 s/30 s (selectable)
Pressure (Digital value, gauge pressure)	Rated pressure range	0.000 to 1.000 MPa, 0.00 to 10.00bar, 0.0 to 145.0 psi
	Measurement accuracy	±2.0% of F.S.
	Repeatability	±0.2% of F.S. (with a response time of 50 ms)
	Display resolution	0.001 MPa, 0.01 bar, 0.1 psi
	Response time	Selectable from 10 ms, 50 ms, 100 ms, 500 ms, 1.0 s, and 5.0 s ^*4
Humidity (Dew point)	Rated relative humidity range/ dew point range	15 to 100%RH (no condensation)/Corresponds to the relative humidity range ^5 ^6
	Measurement accuracy	±4°C, ±7°F ^5 ^6
	Display resolution	5%RH/1°C, 1°F ^5 ^6
Temperature	Measurement accuracy	±2.0°C, ±3.6°F ^*7
	Display resolution	0.1°C, 0.1°F ^*7
Shut-off valve	Response time	1 s or less (closed → open)
	Leakage amount	50 mL/min 0.002 CFM (N) or less
Filter/regulator (Standard model only)	Pressure adjustment range	0.15 to 0.90 MPa
	Filtration degree	5 μm 0.196850 Mil
	Drainage cup capacity	60 cc
Check valve		Available
Display		Color LCD, status indicator
Data accumulation	Accumulation period	Accumulated data: approx. 2 years/Instantaneous data: approx. 2 weeks
	Data reading	USB 2.0/Ethernet
I/O	Control output (Ch.1/2/3/4/5)	NPN/PNP setting switchable, open collector output 30 VDC or less, N.O./N.C. setting switchable, max. 100 mA/Ch., residual voltage: 2.5 V or less
	Analog output (Ch.1/2)	4 to 20 mA, load resistance: 260 Ω or less ^*4
	External input (Ch.2/3/6)	Short-circuit current: 1.5 mA or less, input time: 20 ms or more
Protection circuit		Power supply reverse connection protection, power supply surge protection, reverse connection protection for each I/O, surge protection for each I/O, overcurrent protection for each output
Power supply	Power voltage	24 VDC +25%/-20% (including ripple), Class 2 or LPS
	Power consumption	1.2 A (300 ms) when opening/closing valve, 100 mA at all other times ^*8 (standalone usage; excluding load current)
Communication interface		USB2.0
Network compatibility		When using only this unit: IO-Link (Specification v1.1/COM3) ^*9 When connecting MP-FEN1 : EtherNet/IP™, PROFINET, Modbus/TCP, MC protocol/SLMP
Environmental resistance	Enclosure rating	IP67 (IEC60529) ^*10
	Ambient temperature	−5°C to +50°C 23°F to 122°F (no freezing) ^*11
	Relative humidity	35%RH to 85%RH (no condensation)
	Vibration resistance	10 to 500 Hz; power spectral density: 0.204 G²/Hz; X, Y, and Z directions
	Shock resistance	300 m/s², XYZ axes, 10 times for each axis
Material		Sensor part : PET/PPS/PBT/POM/aluminum/SPHC Filter/regulator : Aluminum/POM/HDPE/NBR/Nylon ^*12
Weight		Approx. 1050 g 37.04 oz (excluding drainage cup)
^1 An upstream side pressure of 0.2 MPa or less (a filter/regulator adjustment pressure of 0.2 MPa or less for the standard model) worsens the flow rate characteristic of the shut-off valve. ^2 This value is guaranteed by KEYENCE inspection facilities while testing with air. Errors will be introduced by factors such as the gas type, gas temperature, and ambient temperature. ^3 Value in an environment with a constant temperature of 25°C 77°F and compressed air evaluated as purity class 11 (ISO 8573-1 (2010)/JIS B 8392-1 (2012)).±(5.5% of RD + 0.5% of F.S.) when equivalent to purity class 34. ^4 15 ms is added to the analog output response time. ^5 Measurable when at least 2% of F.S. worth of gas is flowing. ^6 The prescribed accuracy may not be met or the unit may be damaged if the compressed air contains a large amount of oil mist, organic solvent, or other gas. (For details, see “Gas Being Measured” on page 4.) ^7 When the flow is 5% of F.S. or higher. Errors due to heat generated by the main unit occur when the flow is too small. ^8 When connecting MP-FEA1 and/or MP-FEN1, add each device’s current consumption (2.1 A or less including load current). ^9 Use an IO-Link master that can supply 1.2 A or more. (1.6 A or less when connecting an MP-FEA1 and an MP-FEN1.) IO-Link is a registered trademark or trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^10 When protection is provided to prevent dust and liquid from intruding through the exhaust port. The IP67 enclosure rating is lost when a USB connection is established. ^11 If this product is used with a power supply voltage of 26.4 V or more, the upper limit on the ambient temperature is 45°C 113°F. ^12 Nylon is only used on the MP-Fx20R.

Keyence BL-501HSO Keyence

$750.00

Only 3 units left

Buy the Keyence BL-501HSO - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence BL-501HSO is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence VS-S320CX Keyence

$0.00

Sold Out

Specifications

Model		VS-S320CX
Storage	Internal storage	7 GB
	microSD card (external)	Max. 64 GB ^*1
Image sensor	Frame rate	83 fps
Lens	Mount	Lens-integrated type
	Max. optical magnification	× 2.4
	Installation distance	50 mm to 500 mm 1.97" to 19.69" ^*2
	Field of view	22 mm to 417 mm 0.87" to 16.42"
I/O connection	Number of inputs	1 (insulated)
	Number of outputs	3 (insulated)
	Number of inputs/outputs	2 (insulated) (input and output switched via settings)
I/F	Ethernet	PoE IEEE 802.3at, M12 X cable × 1
	I/O	1 In/3 Out/2 In, Out M12 A cable × 1
	Lighting interface	Dedicated lighting connection interface × 1
	External media	microSD card slot × 1 (UHS-1)
Functions	Imaging mode	1.6 M 3.2 M
	Output image pixels	(3.2 M mode) 2048×1536 1536×2048 1776×1776 2368×1328 1328×2368 3072×1024 1024×3072
	Exposure time	0.028 msec to 1000 msec
	Image correction functions	Gain, Offset, Gamma correction, White balance, Fine HDR
	Indicators	OLED display, Status LED, Ethernet LED (LINK/ACT), SD card access indicator
	Buttons	Operation buttons × 3
	Installation support functions	Pointer (Class 1 laser product ^*3), Angle monitor
Power supply	Power voltage	24 V +25%/−20% or PoE (IEEE802.3at Power Class 4)
	Current consumption (camera only)	0.97 A, 18.7 W (for 19.2 V)/0.78 A, 18.7 W (for 24 V)
	Current consumption (including lighting)	4.7 A, 89.7 W (for 19.2 V)/3.8 A, 89.7 W (for 24 V)
	Current consumption (With CA-DEx10X connected)	11.3 A, 216.7 W (for 19.2 V)/9.1 A, 216.7 W (for 24 V) ^*4
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Relative humidity	85% RH or below (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.05 G2/Hz; X, Y, and Z directions, 0.5 hours (IEC60068-2-64)
	Shock resistance	50 G, 3 times in each of the 6 directions (IEC60068-2-27)
Size (H×W×D)		122.3 mm × 52.6 mm × 69.2 mm 4.81" × 2.07" × 2.72"
Case temperature		0°C to 65°C 32 to 149°F ^*5
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Case: Aluminum die-casting, Front cover: Glass ^*6
Weight		Approx. 570 g 20.12 oz
^1 Using the configuration software, format the media before use. ^2 VS-LxxxMX/CX’s field-of-view measuring range is 150 mm to 3000 mm 5.91" to 118.11". VS-SxxxMX/CX’s field-of-view measuring range is 50 mm to 500 mm 1.97" to 19.69". ^3 FDA (CDRH) Part 1040.10 (The laser classification is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice), IEC60825-1. ^4 Maximum instantaneous current. Average current is below current consumption (including lighting). ^5 Reference - Case temperature 65°C 149°F with 200 mm × 200 mm × 10 mm 7.87" × 7.87" × 0.39" aluminum board and at ambient temperature of 40°C 104°F. ^6 ESD-Safe, IEC61340-5-1 compliant.

Keyence OP-87669 Keyence

$309.59

Only 1 unit left

Specifications

Model				OP-87669
Type				Spacer for flat
Applicable product				PR-F Series
Number included				2 sets
Material				SUS303
Weight				Approx. 1 g

Keyence CV-X152A Keyence

$4,920.50

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence MP-F20ADM Keyence

$0.00

Sold Out

Specifications

Model				MP-F20ADM
Type				Auto drain cup
Connection diameter				NPT1/2 (15A)
Material				Metal

Keyence ER-U08TPC Keyence

$0.00

Sold Out

Specifications

Model		ER-U08TPC ^1 ^2
Type		Ultra-long distance unshielded type Screw type M8 Connector (M8 3-pin) PNP output
Power supply cable length		― ^*3
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		Available
Button	Function	Distance switching
Detecting distance	With default settings (Mode 1)	9 mm 0.35" ±10% ^*4
	With distance switching (Mode 2)	6 mm 0.24" ±10% ^*4
Response frequency	With default settings (Mode 1)	15 Hz ^5 ^6
	With distance switching (Mode 2)	45 Hz ^5 ^6
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*7
Standard detectable object (Iron, t = 1 mm 0.04")		27 × 27 mm 1.06" × 1.06"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less 50 mA or less for 1 output, or 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*8
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V) ^*9
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*10
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: LCP, Mounting screw: SUS303 (M30: SUS304), Case resin: PBT, Button: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 20 g 0.71 oz
^1 Supports IO-Link specification v1.1/COM2 (38.4 kbps). ^2 Long-body type. See “Dimensions” for details. ^3 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^4 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^5 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detection target is 1/2 the detecting distance. ^6 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^7 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^8 Residual voltage is for when a 2 m 6.6' cable is used. ^9 For IO-Link-compatible devices listed under 1, power consumption is as follows. M8 type: 840 mW or less (35 mA or less at 24 V, 53 mA or less at 16 V) M12 type: 1090 mW or less (46 mA or less at 24 V, 69 mA or less at 16 V) M18, M30 type: 1250 mW or less (53 mA or less at 24 V, 79 mA or less at 16 V) ^*10 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence NQ-P8B5 Keyence

$0.00

Sold Out

Specifications

Model				NQ-P8B5
Length				5 m 16.4'
Material				PVC
Weight				Approx. 750 g 26.45 oz

Keyence AT-V501H Keyence

$787.43

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-SS20A Keyence

$1,025.55

Only 8 units left

Buy the Keyence FD-SS20A - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence FD-SS20A is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence CA-DBW12W Keyence

$1,106.21

Only 9 units left

Specifications

Model				CA-DBW12W
Type				Bar Light
LED color				White
Diffusion plate				A diffusion plate is included with the CA-DBWxxW. The thickness of the diffusion plate is approximately 2 mm 0.08".
Power consumption				13.8 W
Input voltage				12 VDC
Polarizing diffusion plate				OP-87975^*1
Weight				Approx. 195 g
^*1 The included diffusion plate and polarizing diffusion plate cannot be used with the product at the same time. There may be air bubbles or foreign substances on the surface of the polarizing diffusion plate, but these have no effect on the image quality. Even if such substances are present, the product is still within the inspection standards, and these substances do not indicate that the product is defective.

Keyence EX-V02P Keyence

$2,308.18

Only 2 units left

Specifications

Model		EX-V02P^*1
Type		Amplifier Unit PNP
Shape		M10 x 18 mm 0.71" Threaded
Measuring range		0 to 2 mm 0.08"
Display range		-19,999 to +19,999
Linearity		±0.3% of F.S.
Resolution (No. of averaging measurements: 64)		0.4 μm
Sampling rate		40,000 samplings max./sec. ^*2
Display speed		20 times/sec.
Display power		7-segment 2-color LED
Over-range alarm		±FFFF is displayed.
Control input		PNP: Applied voltage; 10 to 30 V
Control output	Setting method	Upper/lower 2-level setting x 4 patterns (selectable)
	Signal	PNP open-collector (HIGH, GO and LOW): 100 mA max. (30 V max.)
	Response time	0.075 ms (at maximum speed)
	OFF-delay time	60 ms
Strobe output		PNP: 100 mA max. (30 V max.), Residual voltage: 1 V max. (N.O.)
Alarm output		PNP: 100 mA max. (30 V max.), Residual voltage: 1 V max. (N.C.)
Analog output voltage	Output voltage	±5V
	Impedance	100 Ω
	Response time	0.075 ms (at maximum speed)
Temperature characteristics		0.07% of F.S./°C ^*3
Major functions		FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc.
Rating	Power voltage	24 VDC ±10%, Ripple (P-P): 10% max.
	Current consumption	240 mA max.
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122 °F
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 235 g
^1 The above data was obtained using an iron target (S45C, SS400, t=1 mm 0.04"). When measuring aluminum, copper, or stainless steel targets, refer to the linear characteristics for these materials. ^2 When the digital filter function is used, the sampling rate is 20,000 sampling/sec. ^*3 When the distance between the sensor head and the target is within 50% of the measuring range.

Keyence ER-GL12N Keyence

$0.00

Sold Out

Specifications

Model		ER-GL12N
Type		General-purpose all-metal shielded type Screw type M12 Cable NPN output Long-Range
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		None
Button	Function	―
Detecting distance		7 mm 0.28" ±10% ^*2
Response frequency		100 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		21 × 21 mm 0.83" × 0.83"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, Mounting screw: SUS303 (M30: SUS304), Case resin: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 75 g 2.65 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence BL-600HA Keyence

$825.00

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.