Machine Vision Systems

$0.00

Sold Out

Specifications

Model				OP-88096
Type				Cable for Separate Amplifier Models: For Amplifier (Connector Type)
AC/DC				24 V DC
Cable end				M8 Wiring Harness
Length				10 m 32.81'
Weight				Approx. 250 g

Keyence EH-402 Keyence

$212.03

In stock, 52 units

Specifications

Model		EH-402
Type		Standard , Non-shielded , Cylindrical
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		10 x 10 mm 0.39" x 0.39"
Stable detecting range		0 to 3 mm0.12"
Maximum detecting distance		7 mm0.28"
Hysteresis		0.04 mm0.002"
Repeatability		0.002 mm0.00008"
Temperature characteristics		+30%, -10% max. of detecting distance at 23°C 73.4°F, within -10 to +60°C 14 to 140°F
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 28 g (including nuts and 3-m 9.8' cable)

Keyence KV-NC32T Keyence

$349.76

Only 9 units left

Specifications

Model				KV-NC32T
General specifications	Power voltage			24 VDC (+10%/-15%)
	Operating ambient temperature			0 to 55°C 32 to 131°F (no freezing)^*1
	Operating ambient humidity			5 to 95% RH (no condensation)
	Operating environment			As little dust and corrosive gas as possible
	Noise immunity			1500 V peak-to-peak or more, pulse duration 1 μs, 50 ns (based on noise simulator) Conforms to IEC standards (IEC61000-4-2/3/4/6)
	Withstand voltage			1500 VAC for 1 minute, between power supply terminal and I/O terminals and between all external terminals and case (1000 VAC for 1 minute, between power supply terminal and output terminals for the transistor output type expansion I/O unit)
	Insulation resistance			50 MΩ or more (500 VDC megger used to perform measurements between power supply terminal and input terminals, and between all external terminals and case)
	Storage temperature			−25 to +75°C −13 to +167°F
	Vibration resistance	Intermittent vibration	Frequency: 5 to 9 Hz	Amplitude: 3.5 mm 0.14"^*2
			Frequency: 9 to 150 Hz	Acceleration: 9.8 m/s² 32.2'/s²^*2
		Continuous vibration	Frequency: 5 to 9 Hz	Amplitude: 1.75 mm 0.07"^*2
			Frequency: 9 to 150 Hz	Acceleration: 4.9 m/s² 16.1'/s²^*2
	Shock resistance			Acceleration: 150 m/s² 492.1'/s², application time: 11 ms, three times in each of the X, Y, and Z directions
	Operating altitude			2000 m 6561.7' or less
	Overvoltage category			I
	Pollution degree			2
Performance specifications	Calculation control method			Program storage method
	I/O control method			Refresh method
	Program language			Expanded ladder, KV Script, mnemonic
	Number of instructions			Basic instruction: 81 types and 182 instructions, Application instruction: 39 types and 56 instructions Calculation instruction: 123 types and 311 instructions, Expansion instruction: 92 types and 141 instructions Total: 335 types and 690 instructions
	Instruction execution speed			Basic instruction: 50 ns minimum, Application instruction: 170 ns minimum
	Program capacity			32k steps
	Maximum number of attachable I/O units			8
	Maximum number of I/O points			256
	Input relay/Output relay/Internal auxiliary relay	R		Total of 9600 points 1 bit (R000 to R59915)
	Link relay	B		8192 points 1 bit (B0 to B1FFF)
	Internal auxiliary relay	MR		9600 points 1 bit (MR000 to MR59915)
	Latch relay	LR		3200 points 1 bit (LR000 to LR19915)
	Control relay	CR		1440 points 1 bit (CR000 to CR8915)
	Timer	T		512 points 32 bits (T0 to T511)
	Counter	C		256 points 32 bits (C0 to C255)
	Data memory	DM		32768 points 16 bit (DM0 to DM32767)
	Link register	W		16384 points 16 bit (W0 to W3FFF)
	Temporary memory	TM		512 points 16 bit (TM0 to TM511)
	High-speed counter	CTH		3 points (CTH0 to CTH2) 32-bit automatic reset counter^3 (Input response: 100 kHz per single phase, 50 kHz per phase difference)^4
	High-speed counter comparator	CTC		6 points (CTC0 to CTC5) 32 bits, two points per high-speed counter
	Index register	Z		12 points 32 bit (Z01 to Z12)
	Control memory	CM		9000 points 16 bit (CM0 to CM8999)
	Positioning pulse output			3 axes Maximum output frequency: 100 kHz
	Base unit I/O			Input: 16 points output: 16 points Input common: 1 point Output common: 1 point
	Number of comments and labels that can be stored in the main unit	Device comment		20000 When a maximum-length ladder program is written with no labels.
		Label		28000 When a maximum-length ladder program is written with no device comments.
	Power off hold function	Program memory		Flash ROM can be rewritten 10000 times
		Device		Nonvolatile RAM^*5
	Clock function			±60 seconds/month (at 25°C 77°F)
	Self-diagnosis function			CPU error, RAM error, and other problems
Input specifications	Relay number			General input: R000 to R009 (10 points), High-speed A-phase and B-phase input: R010 to R015 (6 points)
	Input mode			24 VDC input (open collector)
	Maximum input voltage			26.4 VDC
	Rated input voltage			24 VDC (General input: 5.3 mA, High-speed A-phase and B-phase input: 6.5 mA^*6)
	Minimum ON voltage			19 VDC
	Maximum OFF current			1.5 mA
	Common method			All points/1 common (1 terminal)
	Circuit delay time			General input: OFF to ON: Max. 30 μs (Typ. 3.5 μs), ON to OFF: Max. 50 μs (Typ. 15 μs) High-speed A-phase and B-phase input: OFF to ON: Max. 2 μs (Typ. 1.1 μs), ON to OFF: Max. 2 μs (Typ. 0.3 μs) ^*7
	Input time constant			Normal: 10 ms, When the HSP instruction is used: 10 μs When CR2305 is turned ON: 10 μs to 10 ms, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.^*7
				Delay by input time constant Input time constant setting 10 μs: Digital filter 1.6 to 2 μs Input time constant setting 20 μs: Digital filter 9 to 12 μs Input time constant setting 110 μs: Digital filter 90 to 93 μs Input time constant setting 500 μs: Digital filter 300 to 400 μs Input time constant setting 1 ms: Digital filter 800 to 900 μs Input time constant setting 2.5 ms: Digital filter 2.3 to 2.4 ms Input time constant setting 5 ms: Digital filter 4.0 to 4.5 ms Input time constant setting 10 ms: Digital filter 9 to 9.5 ms
	Response frequency			(High-speed A-phase and B-phase input) Single phase: 100 kHz, phase difference: 50 kHz, 24 V ±10%, Duty 50%
Output specifications	Relay number			General output: R506 to R515 (10 points), High-speed output: R500 to R505 (6 points)
	Output mode			MOSFET (N-ch) output
	Rated load			30 VDC General output: 0.2 A (1.6 A/common), High-speed output: 0.3 A (1.6 A/common)
	Maximum OFF voltage			30 VDC
	Leakage current at OFF			100 μA or less
	Residual voltage at ON			0.6 VDC or less
	Common method			16 points/1 common
	ON/OFF response time			General output: OFF to ON: 100 μs (load of 1 mA or more), ON to OFF: 200 μs (load of 1 mA or more) High-speed output: OFF to ON: 2 μs (load of 7 mA or more), ON to OFF: 5 μs (load of 7 mA or more)
	Overcurrent protection			Protection provided for each common^*8
	Output frequency			High-speed output: 100 kHz (7 to 100 mA load)
Built-in serial port	Interface	Communication standard		RS-232C
		Connection		Modular connector
	Transmission specifications RS-232C	Baud rate		1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
		Transmission method		Full duplex
		Data format	Start bit	1 bit
			Data bits	7 bits, 8 bits
			Stop bits	1 bit, 2 bits
		Error detection	Parity	Even, odd, none
		Transmission distance		15 m 49.2'
		Number of transmission units		1
	Indication			Common between SD/RD SD: (green) RD: (red) The color may appear as orange during transmission.
Internal current consumption				260 mA
Weight				Approx. 220 g
^1 The temperature below the unit center (30 mm 1.18") inside a control panel. ^2 Conforms to JIS B 3502 and IEC61131-2. Scan times: 10 times (100 minutes) in each of the X, Y, and Z directions ^3 You can also configure the settings so that automatic reset is not used. ^4 Only open collectors are supported. Line drivers are not supported. ^5 You can set the target device by clicking “CPU system setting” and then “Power off holding” in KV STUDIO. ^6 Reference value of input current. ^7 The input response time corresponding to the input time constant can be calculated as shown below. (Response time) = (Circuit delay of the input circuit) + (Delay by the digital filter) Example: Maximum response time when the input time constant is set to 10 μs OFF to ON: 2 μs (circuit delay) + 2 μs (digital filter) = 4 μs ON to OFF: 2 μs (circuit delay) + 2 μs (digital filter) = 4 μs Example: Maximum response time when the input time constant is set to 500 μs OFF to ON: 30 μs (circuit delay) + 400 μs (digital filter) = 430 μs ON to OFF: 50 μs (circuit delay) + 400 μs (digital filter) = 450 μs ^8 If an overcurrent occurs, protection operation (output turned OFF) and automatic recovery are repeated for all outputs within the shared common until the cause of the problem is removed.

Keyence OP-88812 Keyence

$472.67

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87524 Keyence

$0.00

Sold Out

Specifications

Model				OP-87524
Type				Dedicated Stand for Securing
Overview				Specialised mounting stand for the telecentric macro lens.
Applicable product				CA-LM0307
Number included				1 unit

Keyence CB-B05LR Keyence

$0.00

Sold Out

Specifications

Model				CB-B05LR
Type				Extension cable L-shape connector (right)
Cable length				0.5m 1.64'
Cable min. bending R				22mm
Material				PVC (jacketing)
Weight				Approx. 70g

Keyence TM-065 Keyence

$6,595.97

In stock, 12 units

Specifications

Model		TM-065
Measuring range		ø65 mm 2.56"
Minimum detectable object		0.5 mm 0.02"
Transmitter/receiver distance		270 mm 10.63"
Light source		InGaN Green LED
Measurement accuracy		±3 µm ±0.000119"^*1
Repeatability		±0.2 µm 0.000008" ^*2
Sampling cycle (trigger interval)		5.5ms (33ms at the initial setting)^*3
Environmental resistance	Enclosure rating	IP64^*4
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
Material		Aluminum
Weight	Transmitter	Approx 1280 g
	Receiver	Approx 1460 g
	Base	Approx 1500 g
^1 Error when measuring width of KEYENCE standard object (glass calibration scale) in a measurement area of 20 mm 0.79"× ø40 mm ø1.57". ^2 Value of ±2σ measuring the width of KEYENCE standard object (glass calibration scale) in the center of the measurement area, an average 16 times, average 14 mm 0.55" line. ^3 When measurement area is minimum, others are initial settings ^4 Apart from connector component

Keyence OP-87602 Keyence

$0.00

Sold Out

Specifications

Model		OP-87602
Type		Display panel cable
Length		2 m 6.56'
Cable min. bending R		24 mm 0.94"
Environmental resistance	Enclosure rating	None
Material		PVC
Weight		Approx. 150 g

Keyence SV3-M500AS Keyence

$0.00

Sold Out

Specifications

Model				SV3-M500AS
General specifications	Applicable servo amplifier			SV3-500L2
	Rated output			4.4k W
	Rated torque			28.4 N·m ^*1
	Instant maximum torque			71.6 N·m
	Rated current			32.8 Arms
	Instant maximum current			84 Arms
	Rated rotation speed			1,500 min^-1
	High rotation speed			4,000 min^-1
	Torque constant			0.932 N·m/Arms
	Rotor moment of inertia			67.5 ×10^-4 kg·m²
	Rated power rating			119 kW/s
	Rated angle acceleration			4,210 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		26 bit
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or higher)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20% to 80% RH (No condensation)
		Operating atmosphere		Indoors (No corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2,000 m 6,561.7' or less (reduced ratings at 1,000 m 3,280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8 ft/s² with servo motor flange surface as reference (up/down, left/right) 24.5 m/s² 80.4 ft/s² (forward/backward)
		Impact resistance		490 m/s² 1,607.6 ft/s² with servo motor flange surface as reference, 2 times
	Isolation rank			Class F
	Min. insulation resistance			500 VDC 10 MΩ or more with insulation resistance meter
	Isolation voltage tolerance			1,500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part 15 B, ICES-003. Class A
	Allowable load inertia moment			5×^*2
	Approx. weight			17.5 kg 38.58 lb
^1 50 W to 750 W rated torque is continuously allowable with an ambient temperature of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W/100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with an ambient temperature of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink. ^2 This is the value at 3,000 min-1. At 4,000 min-1, 1 kW becomes 2×, 1.5 kW becomes 2×, 3 kW (with the SV3-300L2 connected) becomes 2.2×, 3 kW (with the SV3-500L2 connected) becomes 4×, and 5 kW becomes 2.4×.

Keyence KV-8ET2W Keyence

$331.81

Only 3 units left

Buy the Keyence KV-8ET2W PLC Module - a programmable logic controller component from Keyence's industrial automation platform. Provides reliable process control, I/O interfacing, and communication capabilities for manufacturing and process systems. The Keyence KV-8ET2W is a direct drop-in replacement for existing PLC installations.

Keyence BT-WUC71GA Keyence

$0.00

Sold Out

Specifications

Model		BT-WUC71GA
Dedicated AC adapter specifications	Input side	100 to 240 VAC, 50/60 Hz
	Output side	12 VDC, Max. 1.5 A
Dimensions	Dedicated AC adapter specifications	104 x 43 x 31 mm 4.09" x 1.69" x 0.12 (not including the cable)
Weight		Approx. 125 g
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F (No freezing)
	Relative humidity	20 to 85 % RH (No condensation)
	Storage temperature	-20 to +60 °C -4 to 140 °F (No freezing)
	Storage relative humidity	20 to 85 % RH (No condensation)
Accessory		AC adapter (OP-88020)^*1
Dimensions		63.0 x 104.1 x 103.1 mm 2.48" x 4.1" x 4.06"
Weight		Approx. 210 g
^*1 A separate AC cable is required.

Keyence GV-21 Keyence

$230.70

Only 8 units left

Specifications

Model		GV-21
Type		Amplifier Unit, Main Unit
Power consumption	Normal	2200 mW max. (at 30 V: 73.3 mA max.)
	Eco-Half	1700 mW max. (at 30 V: 56.7 mA max.)
	Eco-All	1600 mW max. (at 30 V: 53.3 mA max.)
Display indicator		Dual 7-segment display (Current Value: 3-digit red LED indicator, Preset Value: 3-digit green LED indicator) + 2-color 13-level Bar LED (Red, Green)
Output		NPN
Control output		NPN open collector x 2ch, 40 V DC max./Max. 100 mA, residual voltage 1 V max.
Control input		Emission stop input, Bank switching input, Shift input, Timing input, Each input response time: 20 ms
Response time		1.5/3/10/20/50 ms
Operation status indicators		Control output: Red LED x 2 Channel display: Green LED x 2 Laser radiation emission indicator Green LED Other: Green LED x 2/Red LED x 3
Rating	Power voltage	10 to 30 VDC, including Ripple (P-P) 10 %^*1
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material		Housing material, display cover: Polycarbonate, Key Top: Polyacetal, Cable: PVC
Weight		Approx. 110 g
^*1 If expansion units are added, supply voltage must be 11 to 30 VDC.

Keyence R-9 Keyence

$0.00

Sold Out

Specifications

Model				R-9
Type				Reflector
Applicable product				LV-S Series

Keyence EM-005B Keyence

$0.00

Sold Out

Specifications

Model		EM-005B^*1
Type		Shielded
Shape		M5 Threaded
Detecting distance		1.0 mm 0.04" ±15%
Detectable object		Ferrous metals (see Characteristics for non-ferrous metals)
Standard target (iron, t=1 mm 0.04")		5 x 5 mm 0.20"
Hysteresis		10% max. of detecting distance
Response frequency		1.2 kHz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at +23°C 73.4°F, within -10 to +70°C 14 to 158°F
Display indicator		Red LED
Control output		NPN: 200 mA (40 V) max., Residual voltage: 1 V max.
Housing		Stainless steel
Rating	Power voltage	10.8 to 30 VDC, Ripple (P-P) 10 % or less^*2
	Current consumption	12 mA or less
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
Weight		Approx. 40 g (including nuts and 2-m 6.6' cable)
^1 The alternative-frequency type of EM-005 ^2 Make sure that the power voltage stays within 10.8 V to 30 V even if it is affected by ripple effects.

Keyence NR-XCP30 Keyence

$2,554.47

Only 3 units left

Specifications

Model		NR-XCP30
Display		3.5" TFT color LCD, 240 × 320 dot
Applicable models		NR-X100W^*1
Supported languages		Japanese, English, Chinese (Simplified)
Power supply	Power consumption	1.6 W or less
Environmental resistance	Ambient temperature	0 to +40°C 32°F to 104°F
	Relative humidity	10 to 85% RH (no condensation)
Weight		Approx. 290 g 10.24 oz
^*1 Cannot be connected to the NR-XR01 remote unit.

Keyence OP-87601 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-95373 Keyence

$0.00

Sold Out

Specifications

Model				OP-95373
Overview				Mounting bracket attached to photoelectric sensor PZ2 Series.
Applicable product				PZ2
Number included				1 pcs.

Keyence FU-5FZ Keyence

$0.00

Sold Out

Specifications

Model		FU-5FZ^*1
Optical axis diameter (Standard target to be detected)		ø1.13 mm0.044"
Size		ø3 mm0.118"
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø2.2
Minimum bend radius		R2 mm0.079" Tough-Flex
Minimum detectable object		Object with a diameter of 0.005 mm0.0002"^*2
Environmental resistance	Ambient temperature	-40 to +50 °C -40 to 122 °F
Weight		Approx. 19 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence VS-S160CX Keyence

$0.00

Sold Out

Specifications

Model		VS-S160CX
Storage	Internal storage	3 GB
	microSD card (external)	Max. 64 GB ^*1
Image sensor	Frame rate	85 fps
Lens	Mount	Lens-integrated type
	Max. optical magnification	× 3.5
	Installation distance	50 mm to 500 mm 1.97" to 19.69" ^*2
	Field of view	16 mm to 417 mm 0.63" to 16.42"
I/O connection	Number of inputs	1 (insulated)
	Number of outputs	3 (insulated)
	Number of inputs/outputs	2 (insulated) (input and output switched via settings)
I/F	Ethernet	PoE IEEE 802.3at, M12 X cable × 1
	I/O	1 In/3 Out/2 In, Out M12 A cable × 1
	Lighting interface	Dedicated lighting connection interface × 1
	External media	microSD card slot × 1 (UHS-1)
Functions	Imaging mode	1.6 M
	Output image pixels	(1.6 M mode) 1440×1072 1072×1440 1248×1248 1664×928 928×1664 2160×720 720×2160
	Exposure time	0.021 msec to 1000 msec
	Image correction functions	Gain, Offset, Gamma correction, White balance, Fine HDR
	Indicators	OLED display, Status LED, Ethernet LED (LINK/ACT), SD card access indicator
	Buttons	Operation buttons × 3
	Installation support functions	Pointer (Class 1 laser product ^*3), Angle monitor
Power supply	Power voltage	24 V +25%/−20% or PoE (IEEE802.3at Power Class 4)
	Current consumption (camera only)	0.97 A, 18.7 W (for 19.2 V)/0.78 A, 18.7 W (for 24 V)
	Current consumption (including lighting)	4.7 A, 89.7 W (for 19.2 V)/3.8 A, 89.7 W (for 24 V)
	Current consumption (With CA-DEx10X connected)	11.3 A, 216.7 W (for 19.2 V)/9.1 A, 216.7 W (for 24 V) ^*4
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Relative humidity	85% RH or below (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.05 G2/Hz; X, Y, and Z directions, 0.5 hours (IEC60068-2-64)
	Shock resistance	50 G, 3 times in each of the 6 directions (IEC60068-2-27)
Size (H×W×D)		122.3 mm × 52.6 mm × 69.2 mm 4.81" × 2.07" × 2.72"
Case temperature		0°C to 65°C 32 to 149°F ^*5
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Case: Aluminum die-casting, Front cover: Glass ^*6
Weight		Approx. 570 g 20.12 oz
^1 Using the configuration software, format the media before use. ^2 VS-LxxxMX/CX’s field-of-view measuring range is 150 mm to 3000 mm 5.91" to 118.11". VS-SxxxMX/CX’s field-of-view measuring range is 50 mm to 500 mm 1.97" to 19.69". ^3 FDA (CDRH) Part 1040.10 (The laser classification is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice), IEC60825-1. ^4 Maximum instantaneous current. Average current is below current consumption (including lighting). ^5 Reference - Case temperature 65°C 149°F with 200 mm × 200 mm × 10 mm 7.87" × 7.87" × 0.39" aluminum board and at ambient temperature of 40°C 104°F. ^6 ESD-Safe, IEC61340-5-1 compliant.

Keyence CV-H500C Keyence

$1,418.78

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence XG-7500 Keyence

$2,102.72

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87621 Keyence

$0.00

Sold Out

Specifications

Model				OP-87621
Type				Chemical resistant connector cable
Applicable product				PR-G series
Number included				1
Cable end				M8 straight - Loose wire
Number of core				4
Length				2 m 6.56'
Material				PVC (cable), Nut (SUS316L)
Weight				Approx. 75 g

Keyence OP-88735 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-VM36LN Keyence

$0.00

Sold Out

Specifications

Model			GL-VM36LN
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			36
Total length			1440 mm 56.69"
Detection height			1400 mm 55.12"
Protection height			1485 mm 58.46"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	5.3
		OFF→ON	48.0 ^*3
		All blocked→ON	55.2 ^*4
	With channel A or B	ON→OFF	15.0
		OFF→ON	60.8 ^*3
		All blocked→ON	81.6 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	145 ^*5
		Receiver	158 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	55 ^*5
		Receiver	60 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		940 g 33.18 oz
	Receiver		950 g 33.53 oz
	Total		1890 g 66.71 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.