
Specifications
Model |
GL-VM191FN |
|||
Beam axis spacing/Lens diameter |
10 mm 0.39": ø4 ø0.16" |
|||
Number of beam axes |
191 |
|||
Total length |
1920 mm 75.59" |
|||
Detection height |
1900 mm 74.80" |
|||
Protection height |
1924 mm 75.75" |
|||
Minimum detectable object size |
ø14 mm ø0.55" *1 |
|||
Detecting distance |
0.3 to 12 m 1.0' to 39.4' *2 |
|||
Effective angular aperture |
Up to ±2.5° (3 m 9.8' or above) |
|||
Light source |
Infrared LED (850 nm) |
|||
Detection mode |
ON when all beam axes received |
|||
Synchronization method |
Optical synchronization |
|||
Interference prevention function |
Interference prevention up to 2 units by series connection and switch setting |
|||
Control output (OSSD output) |
Output type |
Transistor output ×2 (PNP/NPN) |
||
Maximum load current |
150 mA or less |
|||
Residual voltage (when ON) |
Up to 2.5 V (with 5 m 16.4' cable) |
|||
OFF voltage |
Up to 2.0 V (with 5 m 16.4' cable) |
|||
Leakage current |
Up to 0.8 mA |
|||
Maximum load capacity |
0.8 μF |
|||
Load wiring resistance |
Up to 2.5Ω |
|||
Protection circuit |
Power supply reverse connection protection, short circuit protection for each output, surge protection for each output |
|||
Approved standards |
EMC |
EMS |
IEC/EN61496-1, UL61496-1 |
|
EMI |
EN55011 Class A, FCC Part15B Class A, ICES-003 Class A |
|||
Safety |
IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) |
|||
Response time (OSSD) |
With channel 0 |
ON→OFF |
11.9 |
|
OFF→ON |
61.3 *3 |
|||
All blocked→ON |
78.4 *4 |
|||
With channel A or B |
ON→OFF |
41.1 |
||
OFF→ON |
118.8 *3 |
|||
All blocked→ON |
178.6 *4 |
|||
Inputs |
Short circuit current: Approx. 3 mA |
|||
Power supply |
Power voltage |
24 VDC -20/+25% 10% ripple (P-P) or less, class 2 |
||
Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control |
Transmitter |
187 *5 |
||
Receiver |
213 *5 |
|||
Current consumption (at maximum) (mA) Indicator : OFF |
Transmitter |
66 *5 |
||
Receiver |
80 *5 |
|||
Environmental resistance |
Enclosure rating |
IP65/IP67 (IEC60529) |
||
Ambient light |
Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less |
|||
Operating ambient temperature |
-30 to +55°C -22 to +131°F (no freezing) *6 |
|||
Operating relative humidity |
Up to 95%RH (no condensation) |
|||
Storage temperature |
-30 to +70°C -22 to +158°F (no freezing) |
|||
Storage relative humidity |
Up to 95% RH |
|||
Overvoltage category |
ll |
|||
Vibration resistance |
5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes |
|||
Shock resistance |
15 G 6 ms pulses 100 times each in X, Y, and Z axes |
|||
Material |
Main unit case |
Aluminum alloy |
||
Upper case/lower case |
PPS (GF40%) |
|||
Front cover |
Polycarbonate, SUS304 |
|||
Weight |
Transmitter |
1250 g 44.12 oz |
||
Receiver |
1260 g 44.47 oz |
|||
Total |
2510 g 88.60 oz |
|||
*1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. | ||||

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Specifications
Model |
OP-87684 |
|||
Type |
Work holding pulley |
|||
Applicable product |
LS-9006 |
|||
Material |
Aluminum (Body), SUS (pulley) |
|||
Weight |
Approx. 150 g |
|||

Specifications
Model |
PR-M51N3 |
|||
Type |
Thrubeam |
|||
Output |
NPN |
|||
Shape |
Mini-slim |
|||
Cable connection |
3 m cable |
|||
Detection distance |
1.2 m |
|||
Number of control outputs |
2 outputs |
|||
Output operation |
Output 1 |
Dark-ON |
||
Output 2 |
Light-ON |
|||
Response time |
Output 1 |
0.5 ms |
||
Output 2 |
ON→OFF: 2.7 ms, OFF→ON: 0.5 ms |
|||
Sensitivity adjustment |
None |
|||
Spot diameter |
- |
|||
Light source |
4 element, point light source, red LED (650 nm) |
|||
Mutual interference prevention function |
- |
|||
Indicator lamp |
Output indicator (orange), stable operation indicator (green), thrubeam type transmitter: power supply indicator (green) |
|||
Control output |
30 VDC or lower, 50 mA or lower |
|||
Protection circuit |
Power supply reverse connection protection, output overcurrent protection, |
|||
Rating |
Power voltage |
10 to 30 VDC, including Ripple (P-P) 10 % |
||
Current consumption |
Transmitter: 11 mA, Receiver: 16 mA |
|||
Environmental resistance |
Enclosure rating |
IP67 (IEC60529), IP69K (DIN40050-9), 4X, 6P, 13 (NEMA250) |
||
Insulation resistance |
20 MΩ or higher (500 VDC) |
|||
Ambient light |
Incandescent lamp: 5,000 lux or lower, Sunlight: 20,000 lux or lower |
|||
Ambient temperature |
-25 to +55 °C -13 to 131 °F (No freezing) |
|||
Relative humidity |
35 to 85 % RH (No condensation) |
|||
Storage temperature |
-25 to +75 °C -13 to 167 °F |
|||
Withstand voltage |
1,000 VAC, 50/60 Hz, 1 min |
|||
Vibration resistance |
10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions |
|||
Shock resistance |
1,000 m/s2, 6 times in each of the X, Y, and Z directions |
|||
Material |
Case: SUS316L, indicator cover/lens cover: polysulfone, |
|||
Accessories |
Instruction manual |
|||
Weight |
Approx. 90 g |
|||

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Specifications
Model |
CA-LHT18 |
|||
F-stop |
F2.8 to 16 |
|||
Focal point |
18 mm 0.71" |
|||
Minimum WD |
0.1 m 0.33' |
|||
Mount |
Special mount (M40 P0.75) |
|||
Compatible image sensor size |
2" |
|||
TV distortion |
1.25% |
|||
Resolving power |
160 cycles/mm at center, 100 cycles/mm on periphery *1 |
|||
Filter size |
77 mm 3.03" P0.75 |
|||
Ambient temperature/humidity range |
0 to 50°C 32 to 122°F, 80% RH or less (no condensation) |
|||
Weight |
Approx. 450 g |
|||
*1 Inspection value | ||||


Specifications
Model |
OP-88639 |
|||
Type |
Adjustable bracket (when illumination unit is used) |
|||
Weight |
Approx. 230 g |
|||


Specifications
Model |
LS-HA100 |
|||
Type |
Head expansion unit |
|||
No. of connectable sensor heads |
2 |
|||
Head compatibility |
Yes |
|||
Display |
LED display |
POWER ON indicator, head status indicator |
||
Output terminal |
Analog voltage output |
±10 V x 2 outputs, Output impedance 100 Ω |
||
Analog current output |
4 to 20 mA x 2 outputs, Compatible load max. 350 Ω |
|||
Power source |
Supplied from the controller |
|||
Environmental resistance |
Ambient temperature |
0 to +45 °C 32 to 113 °F |
||
Relative humidity |
20 to 85 % RH (No condensation) |
|||
Weight |
Approx. 600 g |
|||


Specifications
Model |
LV-H47 |
|||
Type |
Area definite reflective |
|||
FDA (CDRH) Part 1040.10 |
Class II |
|||
Light source |
Visible red semiconductor laser |
|||
Wavelength |
660 nm |
|||
Detecting distance |
FINE |
55 to 85 mm 2.17" to 3.35" |
||
TURBO | ||||
SUPER | ||||
Environmental resistance |
Ambient temperature |
-10 to +55 °C 14 to 131 °F (No freezing) |
||
Relative humidity |
35 to 85 % RH (No condensation) |
|||
Material |
Case |
Glass reinforced plastic |
||
Lens cover |
Glass *1 |
|||
Weight |
Approx. 45 g |
|||
*1 The LV-H47 and the LV-H42 receivers are polyarylate. | ||||


Specifications
Model |
OP-88646 |
|||
Type |
Polarizing filter for AI imaging illumination unit (color) |
|||
Weight |
Approx. 8 g |
|||

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.


PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.


