Machine Vision Systems

$0.00

Sold Out

Specifications

Model				GS-P8CC3
Type				For extension (Straight)
Length				3 m 9.8'
Weight				Approx. 170 g 6.00 oz

Keyence FS-N11MN Keyence

$238.31

In stock, 42 units

Specifications

Model		FS-N11MN
Type		Monitor output Cable
Output		NPN
Main unit/expansion unit		Main unit
Control output		1 NPN open collector 24 V; 1 output max: 100 mA or less; 2 output total: 100 mA or less (used stand-alone)/20 mA or less (multiple connections); residual voltage 1 V or less
Monitor output (1-5 V)		1
External input		-
Light source LED		Red, 4-element LED
APC		ON/OFF switchable (Factory setting: OFF)
Response time		50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)
Number of interference prevention units		0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA (When set to double, the number of interference-prevention units will be doubled.)
Unit expansion		Up to 16 units can be connected total (two output type is treated as two units)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current Consumption	Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V)^1 Eco on mode: 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V)^1 Eco Full mode: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V)
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less
	Ambient temperature	-20 to +55 °C -4 to +131 °F (No freezing)^*2
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Case material		Both main unit and expansion unit housing material: Polycarbonate
Weight		Approx. 75 g
^1 Increases 100 mW (4.0 mA) for High Speed mode ^2 One or two more units connected: -20 to +55 °C (-4 to +131 °F); 3 to 10 more units connected: -20 to +50 °C (-4 to +122 °F); 11 to 16 more units connected: -20 to +45 °C (-4 to +113 °F). When using 2-outputs, one unit is counted as two units. All temperature regulations are for when the unit is mounted on a DIN rail and installed on metal sheeting.

Keyence KV-16EX Keyence

$825.00

Only 5 units left

Buy the Keyence KV-16EX PLC Module - a programmable logic controller component from Keyence's industrial automation platform. Provides reliable process control, I/O interfacing, and communication capabilities for manufacturing and process systems. The Keyence KV-16EX is a direct drop-in replacement for existing PLC installations.

Keyence OP-42120 Keyence

$0.00

Sold Out

Specifications

Model				OP-42120
Type				Expansion loose wire cable
Applicable product				EV (Excluding EV-108)
Length				20 m 65.62' roll
Note				f5.9, 2-core (Brown, Blue)

Keyence OP-88106 Keyence

$0.00

Sold Out

Specifications

Model				OP-88106
Type				Adjustable Bracket
Applicable product				AI-H050, AI-H100, AI-H160
Note				Standard/Long Range, for Separate Amplifier

Keyence XM-2200 Keyence

$0.00

Sold Out

Specifications

Model		XM-2200
Type		Measuring unit
Camera	Image pickup device	4 megapixel CMOS image sensor
	Wavelength at light receiving center	Near-infrared
Measuring range		600 mm × 300 mm × 200 mm 23.62" × 11.81" × 7.87"
Min. display unit	Distance	1 μm
	Angle	0.0001 degrees
Measurement accuracy	Repeatability	Stage locked: ±3 μm Stage unlocked: ±4 μm
	Indication error	Stage locked: ±8 μm ^1 Stage unlocked: ± (10 + L/100) μm ^2
Stage	Withstand load	25 kg
	X-axis movable range	±100 mm 3.94"
	Rotation range	±60°
Probe	No. of probes	1
Stage marker	No. of markers	6
	Marker light source	Near-infrared LED (870 nm)
Probe connection port		2 inputs
Console input		Dedicated console
External remote input		Non-voltage input (contact/non-contact): 2 inputs
Interfaces	Communication (external communication)	USB 2.0 Series A: 3 ports
Display	Built-in display	15" LCD monitor (1024 × 768)
Power supply	Power voltage	Supplied from controller
	Connector type	Dedicated connector
Environmental resistance	Ambient temperature	+10 to +35°C 50 to 95°F
	Relative humidity	20 to 80% RH (no condensation)
Weight		Head: Approx. 39.6 kg (including camera and cable) Console: Approx. 150 g (including cable)
^1 In reference to ISO 10360-2 (within the range of 200 × 200 × 150 mm 7.87" × 7.87" × 5.91" at an operating ambient temperature of 23 ±1°C 73.4 ± 33.8°F) ^2 In reference to ISO 10360-2 (within the range of 500 × 200 × 150 mm 19.69" × 7.87" × 5.91" at an operating ambient temperature of 23 ±1°C 73.4 ± 33.8°F)

Keyence CV-X400F Keyence

$3,486.94

Only 10 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88080 Keyence

$751.97

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-21734 Keyence

$0.00

Sold Out

Specifications

Model				OP-21734
Type				MIL connector dedicated crimping tool
Applicable product				KV/KZ, KL, HC
Weight				Approx. 80 g

Keyence FP-P1 Keyence

$0.00

Sold Out

Specifications

Model		FP-P1
Type		Console
Environmental resistance	Ambient temperature for transport/storage	-10 to +60°C 14°F to 140°F (no condensation)
	Ambient humidity for transport/storage	10 to 90% (no condensation)
	Ambient temperature	0 to +40°C 32°F to 104°F
	Relative humidity	10 to 90% (no condensation)
Enclosure rating		IP65
Weight		2.1 kg 4.63 lb

Keyence OP-88505 Keyence

$692.99

Only 3 units left

Specifications

Model				OP-88505
Type				High-flex
Sensor Side				M8 4-Pin Straight
Cable Connector				Loose wires
Length				2 m 6.6'
Material				Cable: PVC, Connector: Nickel-plated brass
Weight				Approx. 80 g

Keyence IX-150 Keyence

$1,228.44

In stock, 11 units

Specifications

Model				IX-150
Reference distance				150 mm 5.91"
Measuring distance				100 to 200 mm 3.94" to 7.87"
Detection area	Scan mode			Measuring distance of 100 mm 3.94": 56.5 × 42.0 mm 2.22" × 1.65" Measuring distance of 150 mm 5.91": 82.5 × 61.5 mm 3.25" × 2.42" Measuring distance of 200 mm 7.87": 108.5 × 81.0 mm 4.27" × 3.19" (X direction) × (Y direction) ^*1
	Line mode			Measuring distance of 100 mm 3.94": 56.5 mm 2.22" Measuring distance of 150 mm 5.91": 82.5 mm 3.25" Measuring distance of 200 mm 7.87": 108.5 mm 4.27" (X direction) ^*1
Laser Light source	Light source			660 nm (visible light) wavelength red semiconductor laser
	Laser class			Class II laser product (FDA [CDRH] Part 1040.10), Class 2 laser product (IEC 60825-1: 2014)
	Output			0.95 mW (FDA [CDRH] Part 1040.10), 1.6 mW (IEC 60825-1: 2014)
Height(Z direction)	Minimum detectable object size	Scan mode	Height	ø1.7 mm ø0.0669" ^*2
			Average height	ø0.9 mm ø0.0354" ^*3
			Pin height	ø0.8 mm ø0.0315" ^*4
		Line mode		1.1 mm × 1.1 mm 0.0433" × 0.0433" ^*5
	Repeatability			50 μm ^*6
Width(X direction)	Minimum edge detection	Line mode		0.5 mm 0.0197" ^*7
Estimated detection				(When measuring the height between two points, the minimum step difference is as follows. IX-055: 100 μm / IX-080: 200 μm / IX-150: 500 μm / IX-360: 1000 μm / IX-360W: 1000 μm) ^*6
Sampling cycle	Scan mode			120 ms (min.) (typical)
	Line mode			6 ms / 11 ms (selectable)
Image receiving element				Monochrome CMOS image sensor
Image capture lighting	Light source			Red LED
	Lighting method			Pulse lighting
Temperature characteristics				0.04% of F.S./°C ^*8
Environmental resistance	Enclosure rating			IP67
	Ambient light			Incandescent lamp, 5000 lux or less ^*9
	Ambient temperature			0 to +45°C 32 to 113°F (No freezing) ^*10
	Relative humidity			35 to 85% RH (No condensation)
	Vibration resistance			10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions
	Shock resistance			500 m/s² 1640'/s², 3 times in each of the 3 directions
Material				Main unit case: Zinc die-casting / Front cover: Glass, acrylic (hard coat) / Operation indicator cover: TPU / Connector ring: PBT / Connector: Zinc die-casting
Weight				Approx. 190 g
^1 X: Long-side direction of laser, Y: Short-side direction of laser ^2 With a correct reference distance. When measuring using the height tool, measurement point min., and no position adjustment in scan mode. ^3 With a correct reference distance. When measuring using the average height tool, average size min., and no position adjustment in scan mode. ^4 With a correct reference distance. When measuring using the pin height tool and no position adjustment in scan mode. ^5 With a correct reference distance. When measuring using the height tool, tool window size min., and no position adjustment in line mode. ^6 When measuring a KEYENCE reference target (white diffuser) in the center of the field of view at the reference distance in scan mode using the “Max.” measurement point of a height tool. ^7 With a correct reference distance. When measuring metal gauge blocks in line mode using a 4-count averaging filter and the edge positioning tool with no position adjustment. In width mode with the width/diameter tool, the minimum detection value is twice the minimum edge detection. The minimum height differences (estimated) required for edge detection of each model at the reference distance are as follows. IX-055: 0.8 mm 0.03", IX-080: 1.0 mm 0.04", IX-150: 2 mm 0.08", IX-360: 4 mm 0.16", IX-360W: 4 mm 0.16" ^8 At the reference distance from the target. The F.S. for each model are as follows. IX-055: ±10 mm ±0.39", IX-080: ±18 mm ±0.71", IX-150: ±50 mm ±1.97", IX-360: ±80 mm ±3.15", IX-360W: ±80 mm ±3.15" ^9 Using the default settings with a laser light source as the target. ^10 With metal mounting.

Keyence OP-97491 Keyence

$0.00

Sold Out

Specifications

Model				OP-97491
Type				Connector Cable
Applicable product				M12 connector sensor
Cable end				M12 straight - Loose wire
Length				5 m 16.40'

Keyence OP-84249 Keyence

$0.00

Sold Out

Specifications

Model				OP-84249
Overview				Front protective cover protecting detection side of light curtain.
Applicable product				SL-V111FM, SL-V56HM, SL-V28LM
Number included				1 pcs.
Length				1,125 mm 44.29"
Material				Translucent plastic: Polycarbonate Black plastic: ABS

Keyence OP-54030 Keyence

$0.00

Sold Out

Specifications

Model				OP-54030
Type				Polarisation filter
Note				For the 30.5 mm filter size

Keyence CB-C5R Keyence

$0.00

Sold Out

Specifications

Model				CB-C5R
Type				Head connection cable
Cable length				5 m 16.4'
Weight				Approx. 410 g 14.47 oz

Keyence CZ-V22AP Keyence

$366.08

Only 9 units left

Specifications

Model		CZ-V22AP^*1
Output		PNP output
Main unit/expansion unit		Expansion unit
Response time		200 µs (HIGH SPEED) /1 ms (FINE) /4 ms (TURBO) /8 ms (SUPER)
Control output		PNP open-collector x 4 channels, 30 VDC max., Up to 100 mA for one output, Up to 200 mA in total of 4 outputs, Residual voltage: 1.0 V max.^*2
Protection circuit		Reverse-polarity protection, overcurrent protection, surge absorber
External tuning input, external bank switch input (C/C + I-mode), external shift input (super I-mode)		Input time: 20 ms min.
Timer function		Timer OFF/OFF-delay/ON-delay/One-shot, Timer time: 1 to 1000 ms adjustable (for each bank respectively)
Unit expansion		Up to 3 units (4 units total including the main unit)
Number of interference prevention units		0 for HIGH SPEED; 2 for FINE/TURBO/SUPER
Rating	Power voltage	24 VDC, Ripple (P-P) 10 % or less
	Power consumption	Normal mode: 1.5 W (62.5 mA or less), Eco-mode: 1 W (42.0 mA or less)
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)^*3
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material		Housing, cover: Polycarbonate
Accessories		End Unit × 2
Weight		Approx. 100 g
^1 The expansion unit of the FS-V20 Series cannot be connected to the main unit of the CZ-V20 Series. To connect the FS and CZ Series units, connect the expansion unit of the CZ-V20 Series to the main unit of the FS-V20 Series. To connect two or more expansion units, connect the CZ-V20 Series units on the right of the FS-V20 Series units. ^2 20 mA max. when several units are connected. ^*3 When several units are connected, the acceptable ambient temperature varies depending on the conditions given below. To connect several units, be sure to mount them to a DIN rail and to limit the output current to a maximum of 20 mA. When 1 or 2 units are connected: -10 to +50 °C 14 to 122 °F When 3 units are connected: -10 to +45 °C 14 to 113 °F

Keyence OP-21445 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88662 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-42130 Keyence

$0.00

Sold Out

Specifications

Model				OP-42130
Type				Expansion loose wire cable
Applicable product				AP-V41, AP-5, ES-M1, FD-V7, FD-V4, FS Series power supply, LV-S Series power supply, PS-T1, PX-10, PZ1 Series power supply
Length				20 m 65.62' roll
Note				ø4.5, 5-core (Brown, Blue, Black, Orange, Pink)

Keyence LS-7030MR Keyence

$839.98

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence ER-GS12N Keyence

$0.00

Sold Out

Specifications

Model		ER-GS12N
Type		General-purpose all-metal shielded type Screw type M12 Cable NPN output Short-Range
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		None
Button	Function	―
Detecting distance		2 mm 0.08" ±10% ^*2
Response frequency		150 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		12 × 12 mm 0.47" × 0.47"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, Mounting screw: SUS303, Case resin: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 75 g 2.65 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence CA-LM0307 Keyence

$398.34

Only 9 units left

Specifications

Model		CA-LM0307^*1
Optical magnification (reference magnification)		x0.3 to x0.75
WD (at reference magnification)		x0.3: 177.8 mm 7", x0.75: 97 mm 3.819"^*2
Compatible image sensor size		2/3"
Field of view (at reference magnification)	1/3"	4.8 x 6.4 mm to 12 x 16 mm 0.19" x 0.25" to 0.47" x 0.63"
	1/2"	6.4 x 8.5 mm to 16 x 21.3 mm 0.25" x 0.33" to 0.63" x 0.84"
	2/3"	8.8 x 11.7 mm to 22.0 x 29.3 mm 8.8 x 11.7 mm to 22.0 x 29.3 mm
F-stop range (aperture)		5 to CLOSE (F-stop: 2.8 to CLOSE)
Depth-of-field		x0.3: 14.22 mm 0.56", x0.75: 2.27 mm 0.09"^*3
Max. TV distortion		x0.3: 0.10 %, x0.75: 0.025 %
Resolution		x0.3: 11.2 µm 0.44Mil, x0.75: 4.5 µm 0.18 Mil^*4
Mount		C-mount
Ambient temperature/humidity range		0 to +50°C 32 to 122°F, 80% RH or less (no condensation)
Weight		Approx. 345 g
^1 The above values were calculated according to optical design values. Actual values for individual lenses will differ according to precision of assembly. ^2 WD indicates a working distance at reference magnification. WD will vary depending on magnification adjustment. ^3 Depth-of-field applies to an F-stop of 16. Depth-of-field varies depending on F-stop setting. The indicated depth-of-field is a theoretical value that assumes 1/2" image sensor size and a horizontal resolution of 320 lines. (Circle of least confusion is 40 µm 1.57 Mil in the image) ^4 The smallest resolvable feature able to be detected under 550 nm wavelength light.

Keyence OP-89071 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.