Machine Vision Systems

$1,082.25

Only 5 units left

Specifications

Model			GS-71N5
Lock type			Power-to-lock type
Type			Standard type
Response time	Lock	Lock→Unlock	320 ms^1^2
		Unlock→Lock	220 ms^1^2^*3
Lock	Locking force (Fzh)		Min. 2,000 N
	Alignment tolerance of lock		±2 mm ±0.08"
	Mechanical life-span		1 million cycles or more (with door operation speed of 1 m/s)
	Acceptable operation frequency		1 Hz^*4
	Door radius		Min. 250 mm 9.84"
	Auxiliary release		Front, back ^*5
Cascading			Max. 25 units
Control output (OSSD output)	Output		Transistor outputs × 2
	Max. load current		Max. 100 mA
	Residual voltage (during ON)		Max 2.5 V (with a cable length of 5 m 16.40')
	OFF state voltage		Max 2.0 V (with a cable length of 5 m 16.40')
	Leakage current		Max. 0.5 mA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
AUX (Non-safety related output)	Output		Transistor output
	Number of outputs		1
	Max. load current		50 mA
	Residual voltage (during ON)		Max 2.5 V (with a cable length of 5 m 16.40')
External input (Short-circuit current)	Safety input		Approx.1.5 mA × 2
	Reset/EDM input		-
	Lock control input		Approx. 2.5 mA × 1
	OSSD operation switching input		-
Applicable Standards (Safety)			EN 61508, IEC 61508(SIL2/SIL3) EN 62061, IEC62061(SIL CL2/SIL CL3) EN ISO13849-1: 2015(PLd, Category 2/PLe, Category 4) EN ISO14119(Type4) IEC 60947-5-3, EN 60947-5-3 UL 61010-1, CAN/CSA-C22.2 No.61010-1
Protection circuit			Reverse current protection, short-circuit protection and surge protection for each output
Power supply	Power voltage		24 V DC ±20 % (Ripple P-P 10 % or less, Class2)
	Power consumption		3.4 W^*6
Environmental resistance	Enclosure rating		IP65/67(IEC60529), IP69K(ISO 20653) (TÜV SÜD certified), Enclosure Type 3/4X/12/13 (NEMA250)
	Operating ambient temperature		-20°C to +55C° -4°F to 131°F (No freezing)
	Operating relative humidity		5% to 95%RH
	Storage temperature		-25°C to +70°C -13°F to 158°F (No freezing)^*7
	Storage relative humidity		5% to 95%RH
	Vibration resistance		10 to 55 Hz, Double amplitude 2.0 mm 0.08", 5 minutes in each of the X, Y, and Z directions (IEC 60947-5-3)
	Shock resistance		30 G in X, Y, Z directions 6 times each axis (IEC 60947-5-3)
Material	Sensor main unit	Case	SUS304, PPS, PBT, PAR, PA66, NBR
		Lock	Aluminum alloy, Zinc die cast (Nickel chrome plating)
		Cable	PVC
	Actuator	Case	PPS, PBT, NBR
		Lock	Aluminum alloy, SUS303
Weight			Approx. 560 g
^1 Risk time according to IEC60947-5-3 is 150 ms + 2 ms × (number of units cascaded -1). ^2 If the OSSD operation is open/close link mode, Detect→ Not detect: 20 ms + 2 ms × (number of units cascaded -1), Not detect → Detect: 30 ms + 25 ms × (number of units cascaded -1) ^3 430 ms when locked at the same time the actuator is detected. ^4 Acceptable door operation frequency is 3 Hz if the OSSD operation is open/close link mode. In that case, operation distance is Sao(OFF→ ON) = 3 mm 0.12", Sar(OFF→ ON) = 10.5 mm 0.41". ^5 Do not apply excessive torque (0.45N·m or higher). ^6 Power consumption temporarily increases (Max. 10.5 W, Approx. 0.2 s) when the lock control input(s) is(are) turned ON. After that, current consumption will be within the specification. ^*7 When stored for a long period of time, please store it at a temperature of 55°C 131°F or lower.

Keyence LM-X100L Keyence

$0.00

Sold Out

Specifications

Model				LM-X100L
Type				Head
Image sensor				1", 20-megapixel monochrome CMOS
Receiver lens				Double telecentric lens
Image measurement	Field of view	Wide-field measurement mode		325 mm × 175 mm 12.80" × 6.89"
		High-precision measurement mode		306 mm × 156 mm 12.05" × 6.14"
	Minimum display unit			0.1 μm
	Repeatability	Inside camera's field of view (2σ)	Wide-field measurement mode	±0.5 μm
			High-precision measurement mode	±0.1 μm
		With stage movement	X/Y axis	±0.9 μm
			X/Y plane
	Measurement accuracy	Inside camera's field of view (2σ)	Wide-field measurement mode	±2 μm ^*1
			High-precision measurement mode	±0.7 μm ^*2
		With stage movement	X/Y axis (EUX,MPE , EUY,MPE)	±(1.8 + 0.02 L) μm ^*3
			X/Y plane (EUXY,MPE)	±(2.8 + 0.02 L) μm ^*3
AF height measurement	Repeatability			±2 μm
	Measurement accuracy (EUZ,MPE)			±(4.8 + 0.04 L) μm ^*4
Laser height measurement	Measurable range (X/Y)			239 mm × 146 mm 9.41" × 5.75"
	Minimum display unit			0.1 μm
	Repeatability			±0.6 μm ^*5
	Measurement accuracy (EUZ,MPE)			±(4.8 + 0.04 L) μm ^*4
	Spot diameter			ø50 μm
	Laser class			Class 1
External remote input				Non-voltage input (with and without contact)
External output	OK/NG/FAIL/MEAS.			PhotoMOS output Rated load: 24 VDC, 0.5 A ON resistance: 50 mΩ or lower
Illumination system	Transparent			Telecentric transparent green LED illumination
	Ring			Four division, multi-angle color LED/ white LED illumination (electric) Slit ring (directivity) side green LED illumination (electric) Telecentric coaxial white LED illumination
External illumination control	Intensity control			PWM control, 100 kHz
	Output voltage			12 VDC
	Output current			1.6 A (max.)
XY stage	Moving range			300 mm × 150 mm 11.81" × 5.91" (motorized)
	Withstand load			7 kg 15.43 lb
Z stage	Moving range			75 mm 2.95" (electric)
Power supply	Power voltage			100 to 240 VAC ±10% (50/60 Hz)
	Power consumption			150 VA or less
Environmental resistance	Ambient temperature			+10 to 35°C +50 to 95°F ^*6
	Relative humidity			20 to 80% RH (no condensation)
	Overvoltage category			ll
	Pollution degree			2
Weight				Approx. 34 kg 74.96 lb
^1 In the range of 20 mm × 20 mm 0.79" × 0.79", within the operating ambient temperature range of +23°C ±1°C +73.4°F ±1.8°F at the focused focal point position ^2 In the range of 5 mm × 5 mm 0.20" × 0.20", within the operating ambient temperature range of +23°C ±1°C +73.4°F ±1.8°F at the focused focal point position ^3 In accordance with ISO 10360-7, within the operating ambient temperature range of +23°C ±1°C +73.4°F ±1.8°F at the focused focal point position, and with a load weighing 2 kg 4.41 lb or less on the stage (L = amount of X/Y stage movement in mm inch units) ^4 In accordance with ISO 10360-7, for plane-to-point height, within the operating ambient temperature range of +23°C ±1°C +73.4°F ±1.8°F, set to measurement of a target with a maximum height of 50 mm 1.97" or less, (L = amount of Z stage movement in mm inch units) ^5 In-house measurement of a standard target at an operating ambient temperature of +23°C ±1°C +73.4°F ±1.8°F ^6 With an XY-motorized stage travel speed of 80 mm/s 3.15 inch/s: +15 to 35°C +59°F to 95°F

Keyence VT-PW10 Keyence

$0.00

Sold Out

Specifications

Model				VT-PW10
Type				10" widescreen protective sheet
Applicable product				for VT5-W10
Number included				Set of 5 sheets
Note				black, without logo

Keyence OP-26401 Keyence

$0.00

Sold Out

Specifications

Model				OP-26401
Type				Conversion adapter for 9-pin D-Sub connector
Note				It is used in combination with OP-96368.
Weight				Approx. 25 g

Keyence OP-87670 Keyence

$0.00

Sold Out

Specifications

Model				OP-87670
Type				Diameter slit for flat
Applicable product				PR-F Series
Number included				1 pcs.
Slit size				Diameter of 0.5 mm
Material				SUS304
Note				Detecting distance: 30 mm (when attached to both the transmitting and receiving sides) Dedicated for use with thrubeam models
Weight				Approx. 1 g

Keyence OP-88956 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-HF6400C Keyence

$8,724.02

Only 1 unit left

Specifications

Model		CA-HF6400C
Image element		Color CMOS Square pixel 88× high-speed reading
Unit cell size		2.5 μm × 2.5 μm 0.10 Mil × 0.10 Mil
Valid pixel count		64 megapixel mode: 8192 (H) × 7808 (V) 41 megapixel mode: 7168 (H) × 5768 (V) 21 megapixel mode: 5104 (H) × 4092 (V)
Image size		Equivalent to 2" (ø32 mm ø1.26")^*1
Scanning system		Progressive 64 megapixel mode: 59.2 ms (4 ch)/117.2 ms (2 ch)/244.1 ms (1 ch) 41 megapixel mode: 40.4 ms (4 ch)/74.7 ms (2 ch)/160.0 ms (1 ch) 21 megapixel mode: 28.9 (4 ch)/39.2 ms (2 ch)/83.3 ms (1 ch) ^*2
Pixel transfer frequency		1085 MHz
Transfer system		Digital serial transfer
Electronic shutter		Can be set to 0.05 to 9000 msec by specifying the following numerical inputs: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000
Lens mount		Special mount (M40 P0.75)^*3
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	85% RH or less
Weight		Approx. 350 g (not including lens)
^1 Equivalent to 4/3" (ø23 mm ø0.91") in 41 megapixel mode, and 1" (ø16 mm ø0.63") in 21 megapixel mode. ^2 Transfer time varies depending on the channel configuration. ^*3 C-mount lenses can be used by replacing the lens mount on the camera with a C-mount adapter (OP-88578; sold separately). Note that 64 megapixel mode will not be supported.

Keyence EM-005A Keyence

$345.00

Only 1 unit left

Specifications

Model		EM-005A^*1
Type		Shielded
Shape		M5 Threaded
Detecting distance		1.0 mm 0.04" ±15%
Detectable object		Ferrous metals (see Characteristics for non-ferrous metals)
Standard target (iron, t=1 mm 0.04")		5 x 5 mm 0.20"
Hysteresis		10% max. of detecting distance
Response frequency		1.2 kHz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at +23°C 73.4°F, within -10 to +70°C 14 to 158°F
Display indicator		Red LED
Control output		NPN: 200 mA (40 V) max., Residual voltage: 1 V max.
Housing		Stainless steel
Rating	Power voltage	10.8 to 30 VDC, Ripple (P-P) 10 % or less^*2
	Current consumption	12 mA or less
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
Weight		Approx. 40 g (including nuts and 2-m 6.6' cable)
^1 The alternate-frequency type of EM-005 ^2 Make sure that the power voltage stays within 10.8 V to 30 V even if it is affected by ripple effects.

Keyence OP-77680 Keyence

$0.00

Sold Out

Specifications

Model				OP-77680
Applicable product				GT Series/GT2 Series
Note				Roller type. (sold separately) This can be used when the detection target is moving.

Keyence OP-51428 Keyence

$0.00

Sold Out

Specifications

Model				OP-51428
Overview				Reflective tape used with polarized retro-reflective laser sensor (50x15mm).
Applicable product				LV-H64, LV-H65
Material				Polycarbonate, Acrylic adhesive

Keyence RT-13 Keyence

$1,801.70

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence XC-T20E2 Keyence

$0.00

Sold Out

Specifications

Model		XC-T20E2
Rated voltage		125 VAC/DC
Rated current		1 A/pin
Ambient operating temperature		−40 to +80°C −40 to +176°F
Screw torque		0.5 N·m (max.)
Applicable wire diameter		AWG24 to 12
Environmental resistance	Insulation resistance	500 VDC, 500 MΩ or greater
	Withstand voltage	500 VAC, 1 minute, 1 mA or less

Keyence FD-M50AYP Keyence

$2,769.50

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence BL-650HA Keyence

$1,121.31

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV2-B010AK Keyence

$0.00

Sold Out

Specifications

Model				SV2-B010AK
General specifications	Applicable servo amplifier			SV2-010L2
	Rated output			100 W
	Rated torque			0.318 N·m ^*1
	Instant maximum torque			1.11 N·m
	Rated current			0.85 Arms
	Instant maximum current			3.1 Arms
	Rated rotation speed			3000min^-1
	High rotation speed			6000 min^-1
	Torque constant			0.413 N·m/Arms
	Rotor moment of inertia			0.0739 ×10^-4kg·m²
	Rated power rating			15.3 kW/s
	Rated angle acceleration			48200 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (3 directions: up/down, left/right, forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			UL: phase A, CE: phase B
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			35 ×
	Approx. weight			0.7 kg
Electromagnetic brake specifications	Capacity			5.5 W
	Rated voltage			24 VDC ±10%
	Rated current (@20°C 68°F)			0.23 A
	Holding torque			0.318 N·m
	Release time			60 ms ^*2
	Operating time			100 ms ^*2
^1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink. ^2 The release time and operation time of the electromagnetic brake vary depending on the discharge circuit.

Keyence SV2-B040AK Keyence

$769.62

Only 1 unit left

Specifications

Model				SV2-B040AK
General specifications	Applicable servo amplifier			SV2-040L2
	Rated output			400 W
	Rated torque			1.27 N·m ^*1
	Instant maximum torque			4.46 N·m
	Rated current			2.5 Arms
	Instant maximum current			9.3 Arms
	Rated rotation speed			3000min^-1
	High rotation speed			6000 min^-1
	Torque constant			0.544 N·m/Arms
	Rotor moment of inertia			0.556 ×10^-4kg·m²
	Rated power rating			33.1 kW/s
	Rated angle acceleration			26100 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (3 directions: up/down, left/right, forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			UL: phase A, CE: phase B
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			10 ×
	Approx. weight			1.7 kg
Electromagnetic brake specifications	Capacity			6 W
	Rated voltage			24 VDC ±10%
	Rated current (@20°C 68°F)			0.25 A
	Holding torque			1.27 N·m
	Release time			60 ms ^*2
	Operating time			100 ms ^*2
^1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink. ^2 The release time and operation time of the electromagnetic brake vary depending on the discharge circuit.

Keyence OP-51580 Keyence

$130.04

Only 8 units left

Specifications

Model				OP-51580
Type				MiniB USB Cable
Length				2 m 6.56'
Note				Included with the NR-600/NR-500.

Keyence EX-V64E Keyence

$0.00

Sold Out

Specifications

Model		EX-V64E
Type		Controller
Shape		14 x 30 x 4.8 mm 0.55" x 1.18" x 0.19" Thin profile
Measuring range		0 to 4 mm 0.16"
Display range		-19,999 to +19,999
Linearity		±0.3% of F.S.
Resolution (No. of averaging measurements: 64)		1 µm
Sampling rate		40,000 samplings max./sec. ^*1
Display speed		20 times/sec. (2-color, 7-segment LED)
Display power		7-segment 2-color LED
Over-range alarm		±FFFF is displayed.
Control input	Timing input	NPN open-collector or non-voltage contact signal
	Reset input
	Auto-zero input
	Judgment output: Inhibit input
	Synchronization/external settings input
Control output	Setting method	Upper/lower 2-level setting x 4 patterns (selectable)
	Signal	NPN open-collector (HIGH, GO and LOW): 100 mA max. (40 V max.)
	Response time	0.075 ms (at maximum speed)
	OFF-delay time	60 ms (ON/OFF selectable)
Strobe output		NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.O.)
Alarm output		NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.C.)
Analog output voltage	Output voltage	±5V
	Impedance	100 Ω
	Response time	0.075 ms (at maximum speed)
Temperature characteristics		0.07% of F.S./°C ^*2
Major functions		FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc.
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption	240 mA or less
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 235 g
^1 When the digital filter function is used, the sampling rate is 20,000 sampling/sec. ^2 When the distance between the sensor head and the target is within 50% of the measuring range.

Keyence XR-AP1 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-21448 Keyence

$0.00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence MD-C2BU Keyence

$0.00

Sold Out

Specifications

Model				MD-C2BU
Category				Cat.4 PLe
PFH_d				7.77 × 10^-8^*1
B10_d				20,000,000^*2
^1 This value is valid up to 5.6 million laser safety module operations per year. ^2 Replace the laser safety module before the laser safety module performs 20 million cycles.

Keyence XG-7701 Keyence

$1,790.75

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-S035CU (CV-S035C) Keyence

$0.00

Sold Out

Specifications

Model		CV-S035CU
Type		Camera^*1
Image element		1/3 -inch color CCD image receiving element, 2 x high-speed reading using square-pixel, 350,000 pixels Unit cell size: 7.4 x 7.4 µm 0.29 x 0.29 Mil
Valid pixel count		320,000 pixels 656 (H) x 492 (V) ^*2
Pixel transfer frequency		24.5 MHz
Scanning system		Progressive (16 ms)
Transfer system		Digital serial transfer
Electronic shutter		1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 msec to 9000 msec can be set with numeric values.
Lens mount		Special mount (M10.5 P0.5 male)
Environmental resistance	Ambient temperature	Head: 0 to +50 °C 32 to 122 °F, relay unit: 0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Head: Approx. 160 g (including the cable, not the lens) Relay unit: Approx. 70 g
^1 The CA-CN17 camera cable (17 m 55.8') and the CA-CN17R high-flex camera cable (17 m 55.8') cannot be used. ^2 In 310,000-pixel mode, 310,000 pixels (640 x 480) serve as the processing area. In 240,000-pixel mode, 240,000 pixels (512 x 480) serve as the processing area.

Keyence OP-51603 Keyence

$0.00

Sold Out

Specifications

Model				OP-51603
Type				Polarisation filter
Note				For the 25.5 mm filter size